Downloaded trial version of Acrobat XI Pro. Attempted to launch but dialog box indicated that the version of AcrobatPro_11_Web_WWMUI.exe is not compatible with the version of Windows (check if 32-bit or 64-bit version is needed). I'm running Windows 7 Pro

Could not launch a trial version of Acrobat XI Pro due to compatibility even though I'm running Windows 7 on a 64-bit machine. Any ideas why not?

Acrobat XI is a 32-bit process, but should run on a 64-bit machine unless something is set to lock out 32-bit processes.

Similar Messages

  • Firefox 5.0.1 would cause my Free Download Manager to be disabled because it is not compatibl with the new version. What ones are compatible and free?

    I have received a pop-up advisory from Firefox several times, saying that my Free Download Manager is not compatible with the recommended 5.0.1 upgrade and wold have to be disabled until the compatibility problem was corrected.
    (I think that I did download it, and that was when I got the first warning. I visited my download m manager shortly afterward, and all my download history had disappeared. I think that I then reversed the upgrade.)
    Since then, my emails will load only in Basic HTML, which I have several problems with. I don't know if that is a Google or a Firefox problem.
    So, my initial problem is that I need a reliable and easy to use free downloader before I can upgrade and get my Standard HTML back.
    What free Download Managers are compatible with Firefox 5.0.1?
    While we're at it, is 5.0.1 Beta? And what is Beta?

    Solution: (Free Download Manager)
    Go here: http://codecpack.co/download/Free_Download_Manager.html and download Free Download Manager 3.8.1067 Beta 3, it works perfectly with Firefox 5.0.1
    Solution: (to Google mail aka Gmail)
    I have had this problem for a while since I did a previous Firefox update, where I had to force Gmail to load in Basic HTML else it's next to impossible to use it. The solution is this: simply update your Java, and Gmail will work without a problem using Standard HTML. To update your Java go here: http://www.java.com/en/ and select "Free Java Download".
    And beta normally, universally, means "the not quite there yet version of the version we're aiming for" NORMALLY used during production and testing of a type of software.

  • I just upgraded to os 10.9.5. When I try to open iPhoto, I am told that the version I have(9.3), is not compatible with the os. But it came with it when I upgraded. What do I have to do to get an iPhoto that works with 10.9.5? TIA

    I just upgraded to os 10.9.5 on my 15 " macbook pro from os 10.7.5. When I try to open iPhoto, I get the message that it is not compatible with the os. How can that be??? It came with the upgrade. It says the version of iPhoto is 9.3. How do I get an iPhoto that works with os 10.9.5? TIA

    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

  • Bootcamp support drivers "the version of this file is not compatible with the version of windows you are running"

    Hi,
    I've searched everywhere I can think of for a solution to this problem with no success. I see other people have reported similar issues and these have not yet been resolved.
    I have installed Windows 7 32 bit on a new Mac Mini under Bootcamp. When I go to install the Bootcamp drivers in Windows, I get the message "the version of this file is not compatible with the version of windows you are running". 
    Other people have reported this issue when trying to install 3rd party software on a 64 bit version of windows but I'm simply trying to install the Bootcamp drivers on a 32 bit version of Windows.
    Is it possible the Mac Mini needs a 64 bit version of Windows installed under Bootcamp? I haven't seen this requirement mentioned anywhere.
    Appreciated all and any help that can be offered.

    Welcome to the Apple Support Communities
    That's because the Late 2012 iMac and Mac mini only supports the 64-bit Windows 7 version, so the drivers you downloaded are designed to work with the 64-bit version and you can't install them on a 32-bit version. Install the 64-bit Windows 7 on your computer

  • IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

    iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

    Maybe. See:
    Reverting to previous version of Numbers

  • 'The provider is not compatible with the version of Oracle client' exceptio

    Hi
    I installed ODAC-11.1.0.7.10 Beta on my development system and developed a .net application which uses Oracle.DataAccess.dll to connect to Oracle10g database.
    the application is working fine, means opening connection successfully when I run it from my development system. but the same application is throwing
    'The provider is not compatible with the version of Oracle client' exception when I run it on my 10g database server system.
    what I need to do to run the application successfully on the machine where 10g server exists?
    any help is appreciated.
    thanks,
    harry

    Hi Harry,
    I am not sure why you installed 11.1.0.7.10 Beta as 11.1.0.7.20 has been released and you should not be using the beta at this time. That error message is because the dependencies being loaded by the process are the wrong version. When you deploy an ODP .NET application using 11.1.7.x, you need to make sure you deploy it to a machine where the 11.1.0.7.x dependencies are installed. My guess is if I read your poat correctly is that Oracle.DataAccess.dll version 11.1 is loaded but its finding 10.2 dependencies on the target deployment box.
    HTH
    Jenny

  • "The version of this file is not compatible with the version of Windows you're running.[...]".What can I do?

    I must run a 32-bit programe  on a windows 64-bit operating sistem, and i receive this message:"The version of this file is not compatible with the version of Windows you're running.[...]". I tried with Troubleshoot compatibility - didn't
    work. I tried set to run in compatibility mode for Windows XP in file properties window and it didn't work.  What can I do more? I
    must run this programe to acces my database.

    Hello qqnicol,
    What program do you run?
    Please contact the software provider to confirm if this 32-bit program can run in 64-bit Windows.
    As some programs can only run in specific version of Windows, please download the right version of software.
    Most programs designed for the 32-bit version of Windows will work on the 64-bit version of Windows. Notable exceptions are many antivirus programs.
    Device drivers designed for the 32-bit version of Windows don't work on computers running a 64-bit version of Windows too.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Windows desktop application -- version of this file is not compatible with the version of Windows you're running

    I am developing on 64-bit Windows7 Enterprise using VisualStudio 2013.  I created a new Windows desktop VB.net application and just created a release build of the default solution/project targeting "Any CPU".  I provided the EXE to a
    colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
    "The version of this file is not compatible with the version of Windows you're running.  Check your computer's system information to see
    whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
    I changed the build configuration to create a "x86" build but my colleague received the same error.  Any ideas why this would be happening (I checked and my colleague has .Net4 Framework installed as well)?  Thank you for your time and
    response!
    Sunish Abraham
    "The version of this file is not compatible with the version of Windows you're running. 
    Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."

    Hi sunisha,
    According to your description, you'd like to run the application in your colleague's computer.
    I provided the EXE to a colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
    If you want to test the application, you could provide the whole Debug folder to colleague instead of the single exe.
    "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
    Check if the collegue's computer is running 64-bit windows:
    Enter Control Panel, click on System and Security.
    Under this, you can view the system type. This will describe whether you have 32-bit or 64-bit.
    You can also try compatiblity mode.
    If the program is not compatible, then you may try to install and run the program in compatibility mode.
    Use the following steps:
    1)   Right click on the Program
    2)   Click on Properties
    3)   Click on Compatibility tab
    4)   Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
    And if you still have questions, I suggest you deploy the application to the Local Network with clickOnce, then your collegue can install the application from the network.
    #ClickOnce deployment
    http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx
    And also, you could recreate a new small application in your computer in Any CPU, then check if this small new application can work well in your colleague's computer. This can judge if the problem is caused by your application.
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • File not compatible with the version of windows

    Already downloaded the file but when I install it says that the file is not compatible with the version of windows. But my PC is windows 7, 64bit

    I dowload from several different sites and all give the same message. from the adobe site too.

  • E-mailed File "The project is not compatible with the current version of Premiere Elements"

    I have Version 12 on a PC.
    My friend has Version 12 on a MAC.
    E-mailed him a file.
    He could not open, and a message box popped up:   "The project is not compatible with the current version of Premiere Elements".
    Could someone kindly asssit, this does not make sense as to why it is not opening, since both computers are using the same version.
    Thank you,
    Ben
    [email protected]

    Ben
    As said, you cannot open a Premiere Elements 12 Windows project file (named project.prel) in Premiere Elements 12 Mac. And vice versa.
    Details
    Given that your source is imported into a Premiere Elements 12 Windows project and placed on its Timeline for edit. That Timeline content cannot get out of the program without export. Export choices are found in the Publish+Share section of the program.
    In your case, you want to take the Timeline content of Premiere Elements 12 Windows and export it to a format with which Premiere Elements 12 Mac supports (look at .mov or .mp4). In this regard, in Premiere Elements 12 Windows look at Publish+Share/Computer/AVCHD and one of its .mp4 presets or Publish+Share/Computer/QuickTime and one of its .mov presets (suggested H.264 video codec).
    Those exports will be saved to the computer hard drive of the Windows computer. Then email the .mov or .mp4 file (beforehand, check the
    email carrier's specification for that). Depending on the circumstances, you could transfer the file to a USB Flash Drive for the sharing.
    Remember, sharing the .mov and .mp4 involves "whole" video. Depending on the edits, the video may need to be cut by the receipent. You are not dealing with the project file. The story would be different if this sharing and editing is done from Premiere Elements Windows to Premiere Elements Windows. And, if that were the case, then you would have to assure that the source media of the project traveled with the project file. (See Project Archiver feature of the program.)
    That is a rough sketch of the situation. I can fine tune the details further if necessary.
    Please review and consider.
    Thanks.
    ATR

  • The provider is not compatible with the version of Oracle client... again!

    Please, please, please help me!
    I get the error, "The provider is not compatible with the version of Oracle client", intermittently on my Test Server. Strangely, without restarting the server or IIS, my application suddenly decides that I don't have the right Oracle client. I don't have any such issue on my local machine even though I'm using the same Oracle 11g client from Beta 1.
    I have Oracle 11g (D:\Oracle11g\product\11.1.0) installed. I tried specifying which assembly to use in my web.config:
    <compilation debug="true" defaultLanguage="c#">
    <assemblies>
    <add assembly="Oracle.DataAccess, Version=2.111.5.10, Culture=neutral, PublicKeyToken=89b483f429c47342" />
    </assemblies>
    </compilation>
    I'm not even trying to use a 10g client with the Providers as discussed here: "The provider is not compatible with the version of Oracle client"
    What I don't understand is why this error comes and goes?!?! Has anyone experienced anything like this?

    The server is Win 2003. The local development machine is WinXP.
    ...I was trying to wait to install Beta 2 because of the nasty bugs reported on this forum.
    I'm now seeing that ORACLE_HOME wasn't set on my server because my co-worker removed the path. Somehow it was able to find an Oracle Home on the server, but apparently, it didn't always find the same home causing this error intermittently.
    Now, my question is how can I get my application to use the 11g Client as its Oracle Home, while my co-worker can use 10g Client as his Oracle Home? To be a bit more specific, he needs to use an ODBC client to connect because his application uses Classic ASP.
    Is this possible, or are we going to have to set up separate machines?
    Bee

  • TS4036 I've got a new iPad I'm trying to do an iCloud back up but keep being given the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad. How do I restore I cloud on my new device?

    I've got a new iPad and am trying to do an iCloud backup but keep getting the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad.
    How do I restore info from iCloud onto my new device?

    You would have to update your device first, before you can restore your iPad from your backup. Resolution: set it up as anew device, then update your device to the latest version "Settings > General > Updates", then reset your device again "Settings > General > Reset > Erase All Content and Settings" and then after the iPad restarts again, choose to restore your device from your backup.

  • Error :"The provider is not compatible with the version of Oracle client"

    Hi guys!
    I'm facing this problem:
    When my .Net application tries to access the DB, I get this error message above.
    The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
    I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
    The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
    -Oracle Data Provider for .NET 1.x 10.2.0.2.20
    -Oracle Data Provider for .NET 2.0 10.2.0.2.20
    -Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
    -Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
    -Oracle Provider for OLE DB 10.2.0.2.20
    -Oracle Objects for OLE 10.2.0.2.20
    -Oracle Services For Microsoft Transaction Server 10.2.0.1.0
    -Oracle Net 10.2.0.1.0
    -Oracle Universal Installer 10.2.0.2.0
    Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
    These are the Oracle assemblies installes in 'C:\Windows\Assembly':
    Windows Vista Machine:
    ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
    Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
    Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
    Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
    Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
    Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Windows Server Machine:
    ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
    Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
    Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
    Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
    Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
    Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
    Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
    What should I check and do to solve this problems?
    Thanks for help,
    Anderson

    Hi,
    Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
    Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
    I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
    - Read & Execute
    - List folder contents
    - Read
    Regards,
    Mark

  • The provider is not compatible with the version of Oracle client

    We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
    C:\oracle\product\12.1.0\x86
    C:\oracle\product\12.1.0\x64
    The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
    I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
    The provider is not compatible with the version of Oracle client
       Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 
    Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
    Source Error:
    Line 87: mDataSource = dataSource
    Line 88: mConnectionString = GetDBConnectionString(dataSource)
    Line 89: mConnection = New OracleConnection(mConnectionString)
    Line 90: mParams = New List(Of IDbDataParameter)
    Line 91: End Sub
    I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.

    Hi,
    Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
    Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
    Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs  Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
    thanks and regards
    Venkat

  • Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

    Hi,
    We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
    http://support.microsoft.com/en-us/kb/2969673/en-us
    Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
    logged like  "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
    view.
    Please advice how to fix the issue.
    Thanks
    Prasanthi.

    Hello,
    seems to me that you maybe only updated the syncengine but not portal/webservice.
    I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
    -Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

Maybe you are looking for

  • Call Control not in option Jabber for Win 9.2.6

    the call controll in the options menu is not available so we are unable to change UCM clusters

  • Windows 8 and itunes can not detect itouch

    I have windows 8 and itunes will not detect my itouch?   Any tips?

  • TSV_TNEW_PAGE_ALLOC_FAILED in KKAO

    Hi all, An ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED prompts in transaction code KKAO. ST22 error analysis: The internal table "\FUNCTION-POOL=KKAG\DATA=F_COSSA[]" could not be further extended. To enable error handling, the table had to be delete before

  • Is it the same create web service in netweaver CE7.1 and create in ECC6.0?

    Hi. I have some questions about ECC 6.0 and netweaver CE 7.1 1.  I want to test webservice in ECC6.0.      At this time I have no this product, butI have downloaded netweaver CE 7.1 trial version (contains java edition).      If I create web service

  • Export File Size meter

    I wish the export dialog calulated the file size based on the quality, type etc. EG: If im exporting a jpeg and slide the quality slider it would be cool to know what size of file i would get before exporting. Thanks, Braden