Downloading BP/Products/Conditions /transaction from R/3 to CRM

Could u pls tell me the how to Downloading BP/Products/Conditions /transaction from R/3 to CRM
Business partner mapping
Thanks in advance
kumar

Hi Rahul
As stated above this will happen in case the number is already assigned to a business partner.
Are you
1. <u>Reconnecting</u> the CRM system to a new R/3 and the CRM system has data from an old system?
2. Has the replication been done before
3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
Rewards points if this was helpful.

Similar Messages

Initial download of Z contract table from R/3 to CRM

Hi,
We have two contract tables called ZCONTRACTHEAD and ZCONTRACTITEM in our R/3 system which we bring to our CRM system to the same respective tables.
We use a downloadable object ZZCONN_HEAD and ZZCONN_ITEM in transaction r3ac1 and do an initial download using r3as.
My problem is that in CRD client 200 which is mapped to R/3 client 200, this download does not bring any data into CRM. The download says complete but I get a BDOC error in SMW01 saying validation error.
This download works perfectly fine in CRD client 100 which is mapped to R/3 client 600.
I know that this is custom table and not a SAP standard table. But I really don't understand why this would work in one client and not in the other client. I have checked the RFC destinations and also did some other initial downloads on CRD 200 which works fine except for this particular table.
Could you please give me your opinion on how can I debug this and find where is the problem? After doing few debugging myself I found out that I am getting the validation error in BDOC in CRD client 200 is because the intitial download is not bringing any record from R/3.
Due to this problem our contract pricing is not working on our DEV system and I am not able to do any further tests or enhancements.
Any suggestion or insight on this will be very helpful.
Thanks,
Prasoon

Hi Michael,
Thanks for your reply. I tried to debug the initial trasfer from CRM to R/3 but I am not able to debug the function in R/3. Also when I do a Test Function module in R/3 I am not sure as what correct parameter to put. I did refer few OSS notes 656823and 573857 but was not able to debug it in R/3. We are on CRM 3.0 Service Pack 14. Could you please suggest as to how can I debug this initial download ?
Since this initial load works perfectly fine in the other client(100) and not in in client 200, I am not sure what could be the problem.
Any suggestions will be appreciated.
Thanks,
Prasoon

Free Goods Condition table records not getting downloaded from R/3 to CRM

Hi Friends,
I'm trying to download free goods condition records from R/3 to CRM. i have already downloaded condition techique, procedure, condition type, access sequece.
Now i am tryin to download Free goods condition table for Example: KOTN602 to CRM. I created new condition adapter ZDNL_COND_N602 by coping standared adapter DNL_COND_N010 and changed to table table. now i have the following tables in table section.
KONDN
KONDNS
KOTN602
TMC1K
No filter has been set as we have only one record in table KOTN602 in R/3.
i had run initial load of this adapter ZDNL_COND_N602 thr R3AS, then I checked in R3AM, the status is canged to Green. but when I checked in CRM table /1CN/CCFCUS602, no data available in this table ( NO download happens).
Can you please suggest what could be the reason and what is missing?
Thanks
Bharthi

Hello Bharti,
Please make sure in txn R3AC5, for you Z* adapter object, under the tab 'Mapping Modules: R/3 to CRM', you just have
single entry of CND_MAP_MAST_EXCHANGE_MAIN_MBD.
If there are double entries please delete the duplicate.
Also, you can check the logs using txn CND_MAP_LOG_DISPLAY
Object : COND_EXCHANGE
Sub-Object: CONDITIONS
Please give the 'From' and 'To' correctly, to get the correct log messages.
This will give you some hint.
Hope this helps!
Best Regards,
Shanthala Kudva.

Tax condition records replication from r/3 to CRM.

Hi,
We are on CRM 5.0 and backend is 4.7. We have downloaded all condition objects from r/3 to crm. When I tried to create an order everything is determined in CRM (R/3 pricing procedure, PR00) but for tax conditions.
Where I can view the condition records downloaded from R/3 in CRM system?
Thanks in advance.
Srinivas

Hi Nitin,
I believe the maintenance of the condition type is done in R/3. If this is the case then in R/3 you can go to the following path
Under SPRO ->SAP Customizing Implementation guide ->Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control ->Define Condition Types.
Here for the condition type you wiill maintain the "Condition Class" and "Calculation Type". Once it is maintained You can trigger DNL_CUST_CNDALL to bring it down to CRM.
you can monitor the trigger that you did using SLG1 transaction.
Thanks
Abishek

Organization Model download from R/3 to CRM

Hi Guys
We are maintaining the complex Organization model in R/3 system and we need to Download the complete organization Model from R/3 to CRM and its relevant Organization structures too. I could not found a way what is the download object to be used to download the Organization model from R/3 to CRM .
will the Transaction CRMC_R3_ORG_STRUCTURE download the Organization model also , and what is the prerequisites for this organization model download
Thanks in advance
Warm regards
Rajasekhar

Dear Jayesh
1) Do the ALE specific settings like creating Logical systems , Rfc destination,
Distribution Model .
2) Specify the filters in the distribution model as per the note 312090, 550055
3) below link will be usefull to u
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1
Warm regards
Rajasekhar

Need to download CS4 production premium

My past computer died,
I had the files backed up, but the transfer for CS4 production premium didn't work. I have the serial number, but adobe won't send me disks or a link to download from. Does anyone have any recconmendations/
Thanks,
Ben

Hi,
Please download the production Premium CS5 from the link below,
http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
Please make sure you download both the file in the same folder.
Run the Exe file once the both the files are downloaded.
Thank you,
Mohd Naseem

Custom pricing condition not getting triggered automatically in CRM 4.0

Hi
The custom discount pricing condition created in R/3 is active in R/3 and is getting triggered for Sales Orders created in R/3.
I have downloaded the same pricing conditon from R/3 to CRM 4.0 i am able to trigger it manually in CRM service transaction. But i need the condition to be triggered automatically for the pricing group.
Your inputs are highly solicited
Thanks
Padma

Hi Padma,
did you enable the condition download from ERP to CRM already? Did you run the initial condition customizing download and the initial condition master data download successfully (check also the application log in SLG1)?
In addition, you should be aware, that for any condition customizing change in ERP you need to rerun the initial customizing download (there is no delta download) and that you need to refresh the IPC customizing buffer, which is automatically done once a day by default.
Best Regards,
Michael

Middleware-Error of Field conversion from R/3 to CRM

Hello Friends,
I am getting the below error when we tried replicating pricing condition objects from R/3 to CRM. Kindly help me if you have any solution on this.
Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
Message no. CND_MAP141
Diagnosis
Conversion of the source field into the target field cannot be implemented. Possible causes may be:
No conversion is defined for the current contents of the source field in the system tables for condition exchange.
There is no conversion rule for converting the current field content in the system tables for condition exchange.
Conversion according to the defined conversion rule was not correct for the current contents of the source field.
The reason for this os often problems that result from putting together an R/3 System with a CRM System. These problems are, for example:
not paying attention to the restrictions in CRM for data values or supporting applications and objects,
incorrect exchange objects or exchange objects with the wrong selection values,
an inconsistent data structure from the R/3 OLTP System.
Thanks & Regards,
Yogesh

Hello Yogesh
I have just noticed the message you placed on SDN re condition customising download errors. Did you ever get to the bottom of this problem ?
The reason I ask is that I am getting similar errors. I actually started with two errors which I believe are related, these being:
Funct. CND_MAP_CONV_FUNC_T682Z_FNAME cannot convert content AUBEL of field T682Z-QUFNA to field /SAPCND/T682Z-QUFNA
and
Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
I have since read OSS Note 319636 and looked at maintaining the separate
conversion rules in CRM Customizing table CND_MAPM_CNV_FLM by adding an
entry for AUBEL into view V_CND_MAP_CNVFLD using SM30. This I saved to
a transport.
I then looked to add AUBEL to the field catalog within the IMG however I received a
message stating that :
"Entry is in SAP name space. Message no. /SAPCND/CUSTOMIZING403".
So it won't let me.
Did you have similar problems and did you resolve them ?
Regards
Ian
[email protected]

How to avoid configuration product downloading from R/3 into CRM

Hello,
We have CRM 4.0 connected with R/3 backEnd and configurable products are downloading from R/3 into CRM with the whole characteristics.
We don´t use this characteristics in CRM to configure this product and the pricing. Is there any way to avoid this information into CRM??
1.- Though the Middleware???
2.- Though the Uninstalling IPC(internet pricing configurator)???
3.- though the item category of the Business Transaction.???
It´d be grateful to get a way because actually, when we enter the product, this one has to be configurated because of the errors.
Thanks a lot,
Luis Angel Fernández

Hello Luis,
First of all I am unable to understand how are you getting the characteristic through material download.
All configuration comes through Knowledge Base and its runtime version.
If you want to block configurable materials from flowing to CRM then set the filter on Item Category Group.
I think you must have different item Category group for configurable material.
Thanks & Regards
Subhabrata

I have downloaded some products from the store.(education).i want to pay and have them to use.what should i do?

i have downloaded some products from the store.they werer downloaded.now i want to get them and used them.i do i make the payments and get these downloaded products?
<Email Edited by Host>

Again, what product? And from the Apple Store, or the iTunes Store? I presume you mean the iTunes Store since you mention a "Purchased" list, but I'm not sure.
Since you seem to have problems in English, you might want to try posting your issue - a complete description of the issue, please - in your native language. That might be easier for all concerned.
Regards.

Mass download of condition records from ECC to CRM

Hi Team,
We need to download many condition records from ECC to CRM. We are doing a request download but it takes lot of time. Is there a way to do a mass download of condition records form ECC to CRM.
Regards,
Jan.

Hi Robert,
We have all the articles in CRM but the prices are not matching for 2000 articles. Kindly suggest us in doing a mass download of the condition records for those 2000 articles.
Regards,
Jan

KMANU field value download from R/3 to CRM for price Condition type

Hi
We done changes for KMANU field in R/3 - price condition type and that changes have to download from r/3 to CRM. I was tried below object adapters to update field value (R/3 u2013 table name: T685A - KMANU) from R/3 to CRM (Table :PRCC_COND_CT u2013 KMANU). Could you any one tell me how to resolve it. Its urgent plz
u2022         DNL_CUST_CNDALL
u2022         DNL_CUST_CND
u2022         DNL_CUST_PRC
u2022         DNL_CUST_FGD
u2022         DNL_CUST_PRICE
Appreciate your help...........
Regards
Sri

Hello Sri,
Ideally object DNL_CUST_CNDALL should get all changes done to customizing setting in R/3 to CRM.
Did you check the logs in txn CND_MAP_LOG_DISPLAY in CRM?
You can get some hints there, if any error has occured during the download.
Best Regards,
Shanthala Kudva.

From where can I download Ora9i PRODUCTS and TUTORIALS on Windows

Hi everybody,
I could not download Ora9i products except the Ora9i DB from OTN.
Whenever I try to download Oracle PRODUCTS (from Archievs) like Ora9iAS or Colaboration Suit or Business Intelligence OTN just jumps to Ora10gAS (I mean Ora10g family products).
Same thing happens when I try to download the TUTORIALS on Ora9i. Except for the tutorial of Ora9i DB, I cannot dowload the tutorials on Ora9iAS or other products. Even worse most of the tutorials are for LINUX.
Can somebody help me to download:
- Ora9i AS and other Ora9i related products on Windows
- TUTORIALS for Ora9i family on Windows
HELP :-((((
Thank you.
DC
E-mail: [email protected] , [email protected]

There are many different Acrobat-related products.
Acrobat Standard
Acrobat Pro
Adobe Reader
LiveCycle (actually this is another separate enterprise oriented Acrobat family of products.
Acrobat Standard and Acrobat Pro will each install several software programs on your computer. One of which is Acrobat Distiller. Acrobat Distiller is a program that is used to convert postscript files into pdf files. Acrobat Distiller used to be the only way to create postscript files. Now many users never use Distiller to create pdf files, hence its prominence is deminished.

Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

Hi, I would like to deactivate CS6 from my old laptop and reactivate it on my new one. In order to re-activate it, what is the process? Do I need to download the product like the first time? Is there something to be careful of? Thank you!

Hi petrosk47967892,
In order to reactivate this product on a new machine, you can simply download & Install the product on the new machine using the following link and enter the serial number when prompted. Make sure to deactivate the product from your old machine by launching any one of the products, go to Help>Deactivate/signout.
Download CS6 : Download CS6 products
Cheers,
Kartikay Sharma

How to download list of transaction from SAP area menu in SAP1 transaction

Hello All,
My requirement is I want to download the list of transaction under the SAP area menu in SAP1 transaction.
I tried with SE43, entered area menu as S000, but it doesn't give me of the same hierarchy and some transaction were missing, for example IH08 is available in SAP1 transaction and not available in SE43.
Could you please let me know is there any way to download the list.
Regards,
Thanga

If you open SE43N, type SAP1 and Display (F7), Tree is shown with collapsed nodes. Print option in Menu shows the same tree as a list. The nodes do not get expanded by default.
So in order to get expanded tree in list ( so that transaction codes can be seen), you need to expand the tree before choosing Area Menu > Print.
This works for average area menu which is less number of transactions.
Since you are looking for SAP1, it has lot of transactions, and on expanding it, information message is shown as:
The tree could only be partially expanded for performance reasons
Diagnosis: The hierarchy could not be completely expanded for performance reasons; it has too many subnodes.
Procedure:
Restrict the number of nodes to be expanded by expanding a lower-level node
or
Expand this node repeatedly until this message no longer appears. The hierarchy is then completely expanded.
As a result, IH08 transaction which is under Quality Management node can't be seen in list view as overflow occurred before this node was reached.
On debugging, it can be seen that the tree is expanded recursively by standard until an overflow flag is set.
In order to get around this overflow protection, you can write a custom code.
Below snippet is for demonstration purpose.
1. Run FM BMENU_DISPLAY_RSTREE in SE37 with tree_id as QM01
2. Run my snippet that calls same FM in the end
Compare 2 outputs and see the difference.
I am going 1 level deep and IH08 transaction can be seen in output.
Similarly, you can write a code that recursively expands every sub-tree found so that entire list can be seen.
DATA: ls_nodes TYPE hier_iface,
      lt_nodes TYPE STANDARD TABLE OF hier_iface,
      lt_nodes1 TYPE STANDARD TABLE OF hier_iface,
      lt_nodes2 TYPE STANDARD TABLE OF hier_iface,
      lt_refs1 TYPE STANDARD TABLE OF hier_ref,
      lt_refs2 TYPE STANDARD TABLE OF hier_ref,
      lt_text1 TYPE STANDARD TABLE OF hier_texts,
      lt_text2 TYPE STANDARD TABLE OF hier_texts,
      lv_tree_id TYPE hier_guid VALUE 'QM01'.
* read top level node
CALL FUNCTION 'STREE_HIERARCHY_READ'
EXPORTING
    structure_id       = lv_tree_id
    read_also_texts    = abap_true
TABLES
    list_of_nodes      = lt_nodes
    list_of_references = lt_refs2
    list_of_texts      = lt_text2.
* read hierarchies of sub-trees
lt_nodes2 = lt_nodes.
LOOP AT lt_nodes INTO ls_nodes WHERE node_type EQ 'AMRF'.
CLEAR: lt_nodes1, lt_refs1, lt_text1.
CALL FUNCTION 'STREE_HIERARCHY_READ'
    EXPORTING
      structure_id       = ls_nodes-reftree_id
      read_also_texts    = abap_true
    TABLES
      list_of_nodes      = lt_nodes1
      list_of_references = lt_refs1
      list_of_texts      = lt_text1.
* add sub-tree details to main tree
APPEND LINES OF lt_nodes1 TO lt_nodes2.
APPEND LINES OF lt_refs1 TO lt_refs2.
APPEND LINES OF lt_text1 TO lt_text2.
ENDLOOP.
CALL FUNCTION 'BMENU_DISPLAY_RSTREE'
EXPORTING
    tree_id       = lv_tree_id    " Unique ID - 32 Characters
TABLES
    list_of_nodes = lt_nodes2    " Hierarchy Maintenance Tool Node Passing Interface
    list_of_refs = lt_refs2     " List of References to Structure Items
    list_of_texts = lt_text2.    " General Structure Repository Node Text

Downloading BP/Products/Conditions /transaction from R/3 to CRM

Similar Messages

Maybe you are looking for