Downloading DVD from Cannon DC230 using FUJIFILM DVD -R 3inch disk, its just not working, no matter what I try

When I connect my camcorder to the imac the screen on the camcorder goes grey and green lettering is on this screen, PC CONNECT, then a window opens on the pc, it tells me I have inserted a blank DVD, now this DVD is full as I only used it last week, The new window asks me to choose an action from the pop-up menu, I have tried all and even more but nothing happens.
PLEASE HELP.
Thanks.
MedicManOne

SONY DVD-ROM DDU1615, Rev FDS2
I'm not 100% sure that that drive is a burner. For instructions on how to doublecheck, see the following document:
iTunes for Windows: How to tell if you have a drive that can burn a CD

Similar Messages

  • My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.

    My Mavericks upgrade crashed my hard drive and I had to reinstall Mountain Lion.  Now I cannot get any of the apps that I purchased to download.  The icons on the launchpad just say "waiting" no matter what I try.  My app store ID is fine.  What do I do?

    Are you now using a different username from the one you used prior to migrating? If so that is the reason for the problem. You might, then, give this a try:
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder.  At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN.  You will be prompted to enter your admin password which will not be echoed.

  • DVD/CD drive not working no matter what - pavillion dv6812nr entertainm​ent

    Hi! I'm posting this in a new thread because I can't seem to find anyone else with my specific problem.
    So I got my brother's hand-me-down HP pavillion entertainment notebook, and the disc drive will not open (except for a 10-second window while the laptop is starting up). Even when I manage to get a disc in there, my computer isn't reading it or even acknowledging that the disc drive exists. I have tried uninstalling the drivers and reinstalling, but the problem is that I can not even find the DVD/CD device in the Device Manager--it's just not there. I also tried this solution: http://support.microsoft.com/kb/929461 , however when i am in the correct registry subkey, there are no UpperFilters or LowerFilters.
    Please help, I just bought a music recording box and software and really need this fixed!

    Hi @oliviaisinspace ,
    Welcome to the HP Forums!
    It is a superb place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your optical drive is not being recognized in your computer.    Here is a link to CD/DVD Drive Is Not Detected (Windows Vista).  As the link in your post was to a microsoft document for Vista, I assume  that is what you were running.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Using JavaBean with JSP...will not work no matter what

    Hi guys. Sorry that this is such a common, newb question, but I don't know where else to turn.
    I'm new to web application development, Tomcat, and JSP. I'm trying to use a simple JavaBean in a JSP to store some user information. The JSP is located in $CATALINA_HOME\webapps\art , and the UserBean I'm trying to use is in $CATALINA_HOME\webapps\art\WEB-INF\classes . I've tried adding a context in the Tomcat server.xml file, but nothing seems to work, even putting the .class file into the \art directory along with the JSP. The error I get is the following:
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 1 in the jsp file: /welcome.jsp
    Generated servlet error:
    [javac] Compiling 1 source file
    C:\Program Files\Apache Group\Tomcat 4.1\work\Standalone\localhost\art\welcome_jsp.java:43: cannot resolve symbol
    symbol : class UserBean
    location: class org.apache.jsp.welcome_jsp
    UserBean user = null;
    ^
    The source code is:
    welcome.jsp
    <%@ page import="java.sql.*" %>
    <jsp:useBean id="user" class="UserBean" scope="session"/>
    <html>
    <head>
    <title>Art Webapp Test</title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    </head>
    <h1>Art Site</h1><br><br>
    <h3>Welcome Page</h3><br><br>
    <%
         user.setUsername("joe");
    user.setTitle("admin");
    %>
    </body>
    </html>
    UserBean:
    public class UserBean {
    private String username = null;
    private String title = null;
    public UserBean()
         this.username = null;
         this.title = null;
    public String getUsername()
         return this.username;
    public String getTitle()
         return this.title;
    public void setUsername(String inName)
         this.username = inName;     
    public void setTitle(String inTitle)
         this.title = inTitle;     
    }//UserBean
    Thanks for any and all help anyone could give me about this. It seems such a simple thing, to get a JavaBean working in a JSP...and it's very frustrating to have it NOT work when it seems I've done everything possible to get it to.

    Ok, I figured out what the problem was. My Bean was not a part of any specific package. It was never made clear to me that Beans are required to be a part of some package...I had no idea (though they always put them in packages in the tutorials, you think I would have picked up on it!).
    So I just added the following line to the Bean:
    package com.art;
    Then compiled it and copied the .class file to CATALINA_HOME\webapps\art\WEB-INF\classes\com\art
    Ta-da
    Thanks for the help and sorry for taking up space on this board.
    -Matt

  • Exporting XML from PP CS6 to Resolve. Doesn't work no matter what we try!

    My colorist and I have been pulling our hair out trying to figure out how to get this project into Resolve. I am running the latest version of PP Cs6 on a Windows PC. Edited the feature in native R3D format, 4.5k, everything was smooth as silk. I prepped the project by breaking it into 20 minute reels, removing all effects and speed changes, collapsing it down to 2 video tracks and 1 audio tracks and exporting an XML.
    Colorist is running the newest build of Resolve 9 on a Mac and tried to open the XML but it doesn't work. It only shows one clip on the timeline and nothing else. I tried exporting an EDL and it loads a ton of stuff in, but the clips are not right and seem to be the whole takes. He has tried to open in FCP to remake the XML, but it won't open there either. I even tried finding and replacing all the .R3D file extensions in the XML to "_M.MOV" to make it use the proxies instead but no dice.
    Is there any way to make this work? I feel like people go from Premiere to Resolve all the time with no hassle. Since we're both using the latest builds I am wondering where the hangup is. I feel like its within Premiere but I don;t know what to mess around with at this point.
    Any assistance is appreciated!

    I wrestled with that for about 20 hours before getting it.
    Here's some of my code:    makeButton("Refresh Table",northP,
        new ActionListener()
          public void actionPerformed (ActionEvent e)
            updateTable();
      public void updateTable()
        ch.sendShowAll();
        model.handleServerMessages();
        model.fireTableDataChanged();
    /////////////////////This worked for me.
    Both these methods occur in the JFrame class that displays the table. I pass the table
    model to the JFrame constructor. In the above code, the model object is an instantiation
    of the class that extends AbstractTableModel, with the methods getElementAt(), getRowCount(), and getColumnCount().
    If you post some of your code,I'll try to help.
    John

  • I was using my ipod 4th gen and it just stopped working..help plz?

    i was using my ipod 4th gen and it just stopped working..help plz?

    Try restoring...
    iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
    If you can't restore the iPod...
    Apple - Support - iPod - Service FAQ

  • My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

    My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

    Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

  • Hacked Message: Your Apple ID was just used to download Podcasts from the App Store on a computer or device that had not previously been associated with that Apple ID

    So I just got a message from Apple saying
    "Your Apple ID was just used to download Podcasts from the App Store on a computer or device that had not previously been associated with that Apple ID"
    I am new to Apple products and signed up to the app store about an hour before but have not downloaded any apps yet.
    I also turned on iCloud Drive.
    Neither of these are Podcasts and I do not have any Podcasts on my device.
    The message is a really poor warning, it could for instance list the IP address which would immediately tell me if it was me.
    It could list what type of device it was.
    It could list what Podcast was downloaded.
    But no, just some random message, probably generated by the really bad default iPhone settings that put ease of use before security.
    I have a long complex password that I do not want ot have to change just because Apple generates a stupid message.
    On Google you have a log of all logins and devices, is there something similar with Apple, so I can figure this out?

    Kroll17 wrote:
    I don't know, I thought it was pretty clear
    "was just used to download Podcasts from the App Store"
    it said it was used to download a Podcast from the App Store
    I have not down downloaded any podcasts and there are no podcasts in the podcasts app, of course if Apple were to list the podcast that was downloaded, the IP address and the device it might help one dismiss the message.
    I am running the latest v8.1.1 although how the version of my OS related to a message generated by Apple servers is beyond me, unless my device is not authenticating properly so Apple thinks I am someone else but then as I have not downloaded any Podcasts that would not seem to be the issue.
    It does NOT say you downloaded a podcast. First, podcasts are not downloaded from the App Store; they are downloaded from the iTunes store.
    It's very clear to me; the app named  "Podcasts" was downloaded, not a podcast. "Podcasts" is a app provided by Apple for managing and downloading podcasts.

  • How do I delete music from my iPhone when I have downloaded it from the cloud using iTunes Match?

    How do I delete music from my iPhone when I have downloaded it from the cloud using iTunes Match?

    Hey MerrillSharon,
    Thanks for using Apple Support Communities.
    You can delete these songs and redownload them from iCloud.
    iTunes Store: How to delete songs from iCloud
    http://support.apple.com/kb/ht4915
    Have a nice day,
    Mario

  • Download Reports from SCCM 2012 Using PowerShell

    Hi,
    I Wants to Download reports from SCCM 2012 using powershell but couldn't find a way.
    I used Invoke-Cmreport but it says no reporting Service point on site code XYZ and server ABC
    But Reporting Service is enabled and works fine as i can check/download report manually
    Thanks 

    Hi,
    You could have a look at the script in the blog below.
    How to Download All Your SSRS Report Definitions(RDL files) Using PowerShell.
    http://www.sqlmusings.com/2011/03/28/how-to-download-all-your-ssrs-report-definitions-rdl-files-using-powershell/
    Note: Microsoft provides third-party contact information
    to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce

  • Cannot download apps from App Store using iPhone 6

    Cannot download applications from App Store using my iPhone 6, and when I made a sign out, I cannot sign in, even I asked to reset my Apple ID account by e-mail, but I did not receive any feedback by mails yet, while I can access the App Store, and download apps using my old iPhone 4, and my iPad Air using the same account.
    I Stuck now, and what I read cannot help me, as I cannot sign in even.

    Dears, the case is sorted now, and I am sharing the YouTube link which helped me to sort this issue, to help others.
    http://youtu.be/NzmsNutC6aI
    it was simple due to not setting the date and time automatically in : Settings-General-Date and Time, then set automatically.

  • Download images from MySite PictureLibrary using imaging.asmx

    Hi Team,
    Could you please assist in Downloading images from one of the Custom View of MySite PictureLibrary using imaging.asmx.
    code samples appreciated
    Thanks Ba$va

    Hi,
    In SharePoint 2013, we can use REST API to perform CRUD operations on a site from client side.
    What’s more, I have seen a post with useful suggestions from Dennis in your another thread, you can check the links he provides for more information.
    http://social.technet.microsoft.com/Forums/en-US/b172e86d-fc3d-4905-88d0-fa809508fe3e/download-images-from-mysite-picturelibrary-using-restapi?forum=sharepointdevelopment
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

  • DVDs created in Elements 8 do not work on standalone players

    Hi,
    I've been using Elements 7 on Windows 7 before Elements 8 was released.
    The source of video is a SD HDD-camcorder and for all the projects I created 4.7 gb dvd-folders, then using a seperate dvd-writing software to burn to discs.
    Now since Elements 7 wasn't officially supported I upgraded to Elements 8, but the problem is that the dvds created - although same workflow, do not work on standalone dvd players.
    Now, the source is the same, I've tried diffrent dvd-media (dvd+r, dvd-r) and diffrent software for writing dvds, and i've tried four diffrent dvd players and only one player is able to playback the elements 8 dvds.
    The dvds are of the type Autoplay-dvd.
    I assume given these combinations i've tried - the process of compiling a dvd has changed in Elements 8 as compared to Elements 7 which then outputs less compatible dvd-folders.
    Googling around on the term "Opendvd" i found a concept of DVD-V and DVD-R and a knowledge base article on Microsoft hinted that these are diffrent modes of dvd-video or something and I'm wondering if this might be the reason - regardless of it, i've no idea how to fix it so i really need help on solving this issue,
    hope somebody can help.

    Okay, I took an even more systematic approach to this problem yesterday,
    here's what i did (all burning done in cdburnxp),
    1. using a dvd+rw disc i burned an older dvd-folder which i knew worked - worked fine in player, this was just to confirm that the player could indeed play back dvd+rw/media.
    2. using the same disc i burned a dvd-folder which was created in elements7 - it worked.
    3. using the same disc i encoded a project created in elements 7 loaded in elements 8 - it worked
    4. using the same disc - i tried once again tried to create a new project added one old video file too see if there might be something wrong with the source video.
    At this point i also did some research using the Get Media Info option in premiere, and the framerate for the same file was reported as 29,97 and 25 depending on where on the harddrive i tested it - might be because premiere adds some metadata to it.
    5. using the same disc - i reencoded an elements 8 project which didn't work on standalone players, burned the dvd folder - it worked
    At this point i was thinking, okay, maybe the Media I did use orignally wasn't compatible, so i gave it another shot in #6 and #7.
    6. Using a dvd-r i burned the image from step #5 -burned at 16x - it worked.
    7. Using a dvd+r I burned the image from step #5 - burned at 16x - it also worked!
    Now the confusion is complete for my part - and I can not find any conclusive reason for the misbehaviour orignally reported.
    Seems like either Premiere Elements or the media was having a bad hair day when I originally reported this problem.

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • I am an absolute newcomer to Lightroom.  I have downloaded images from camera (OMD EM1) and divided them into folders.  Some folders work ok in Develop mode.  With other folders I get the words "This file could not be found".  What should I do

    As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found".  What should I do?

    may i suggest opening the files in Olymous Viewer 3  and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files 
    The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
    . The tiff files just LOOK better in LR  after the conversion . there is a youtube on this subject and when i tried it myself i was impressed 

Maybe you are looking for