Downloads repeat the last item requested instead of loading a new item

After downloading a document and printing it and then clearing from the download list, the second request for another document to be downloaded results in the first document being downloaded again.

Do both documents have the same name?
You can try to clear the browser cache and the Windows %temp% folder to see if that helps.

Similar Messages

How to repeat the last 2 request via delta?

Hi,
I have loaded data into a DSO from R/3. After that I loaded further into an other DSO, but it was inconsistent and it could not have activated it. So the last 2 Request in the 2. DSO were bad, I set the request to "red", deleted them, and now I want to reload them again (from the change log table of the first DSO). When I make a delta repeat, the system loads only the last one request.
What should I do?
Thx.

Hi Joe,
in such cases I do the following:
1. delete all requests you want to reload in the second DSO
2. reset the datamart status in the first DSO for the latest request by clicking on the "where used" button at the end of the line
3. reset the datamart status in the first DSO for the older request in the same way.
if there are more requests you have to do this for each request you want to reload. Attention: if there are requests which were activated together so they have the same activation request number (collum "PSA request number generated when request is activated") the datamart status will be reset for these requests in one step.
4. press the refresh button and check if the datamart status is reset for all requests you want to repeat.
5. load delta from first to second DSO. This delta will contain each request which is not marked with to "where used" icon. You can check this for your DTP in the monitor under header -> selections. There should be both requids (if you're usind old update rules you can check it also in RSMO under details -> databasis)
Hope this helps
Best regards
Nicole

My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading.

My macbook has Itunes and I am trying to download some songs that I bought on my Ipad onto the macbook. It has worked in the past, but one song has been downloading for the last day. No more will download it seems stuck downloading. I don't need the song. But I want the others to download.

Hi there,
You may find the information in the articles below helpful.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
-Griff W.

Google doea not accept a new entry - I have to reopen it in a new tab. Otherwise it just repeats the last entry

I am using using XP SP3
G
oogle doea not accept a new query - I have to reopen it in a new tab. Otherwise it just repeats the last query.

What model MBP do you have? What OS are you trying to install? And, from where?

When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..

When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..

Make sure that Firefox closes properly and that that there are no longer Firefox or plugin-container processes left on the Processes tab in the Task Manager. Otherwise session restore will reopen the page(s) from the previous session.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs

HT201252 If I do a restore can I recover apps, music, books download since the last backup?

My iPad generation 3 will not turn on. If I do a restore can I recover apps, music, books download since the last backup?

Restore onto a new device? Yes, provided the backup is complete. If it was done using iTunes, with all synch options enabled, onto local storage and encrypted, the resultant device will be identical in content to the original, have done this with an iPad 1 to a 3 and the 3 to a 5.
Onto the original device? Need to persuade it to turn on first else no restoring can be done.
Using iCloud? No idea on degree of completeness. Don't like putting my stuff somewhere beyond my control so don't use it and don't know.

TS1718 I have purchased two complete albums in the last three weeks, old Bob Seger and new Maroone 5, both have the same issue, only a few songs will play and will skip over the rest of the songs on IPod and on computer????

I have purchased two complete albums in the last three weeks, old Bob Seger and new Maroone 5, both have the same issue, only a few songs will play and will skip over the rest of the songs on IPod and on computer????

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the corrupt tracks from the music section of your iTunes library, close & then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked. This seems to help with partial downloads...
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Need to know the name of DSO used to load Header and Item level info in LO

Hi friends ,
can some one tell me the name of DSO used to load Header and Item Level information from Data sources - 2lis_11_vahdr and 2lis_11_vaitm .
plz make it fast
Thanks

Hi ,
It is 0SD_O03 from 2lis_11_vahdr and 0SD_O01 & 0SD_O02 from 2lis_11_vaitm.
Bye
Dinesh

The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

There are several other similar posts in this forum with the answers. Your post appears third in my Google search today looking for a solution so I thought I'd add the solution here as well.
It is obviously a bug in either (or both) Firefox and the NYT.
The quickest solution is to simply go to the VIEW Menu in Firefox, then the ZOOM option and choose RESET.
I use Mac and this happens in Firefox 3.6.10. It does not happen in other browsers like Safari, Chrome and Camino, and it did not occur before last week.
It has also occurred in the iOS version of Safari on iPad. Not sure how to fix it there.

Firefox 26 does not load the home page. Instead, it loads the previous session (and that includes all the tabs). It does not matter how Firefox is closed.

Firefox 26 does not load the home page. Instead, it loads the previous session, irrespective of what has been entered in "Options". The browser is running in Win 7.0 64-bit; Norton Internet Suite 21 provides the security functions. There are certain "cloud" solutions also running such as Google Drive, Box, Skydrive and Cubby. The browser behaves similarly in all my machines (the setup and OS is similar to the one described above) and no amount of resetting of "Options" seems to affect it . Nor is it affected by the manner Firefox is closed. It is obviously a bug that needs to be fixed.

u wait for firefox next update
otherwise
1. go to firefox tab .
2. click on help ->trouble shooting information.
3. reset ur browser .
ur problem is solved

TS1424 Needing info on an album I just purchased. Every song on the album seemed to download except the last. Then when I went back to play them it seemed to only download 2 minutes of each tune

Needing info on an album I purchased. Thought every song had downloaded . But the last song didn't download and then on the playback every song only had 2 minutes of play on it .It's like they are only partially downloaded. Thanks for any comments!

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Why can't I redownload my music over icloud, eventhough most of my songs downloaded just the last few won't.

I got a new iPhone 5s and I was re-downloading my songs, most of them worked but the last 100 didn't. I don't know the problem please help, it just keeps coming up ad can not download at this time. I tried again at several other times no change. Any idea what I should do?

If you have restored your device (which sounds like what you have done) and your music was not backed up and has been deleted off your PC, then there is no way of recovering it. The iTunes store only allows the download of purchased music once. However, if you live in the US you can access iTunes in the Cloud beta, which allows you to re-download your purchased music within iTunes. This service will launch later in the year for those not in the US.
You must make sure you back-up all your purchased media. The new iTunes in the Cloud service will alleviate the need to do this, but its still limited to the US-only at the moment.

Enqueue/Dequeue is repeating the last queued element

Hello
I am trying to aquire data from a camera at 256fps in one for loop, enqueueing the data after each frame is acquired. A seperate while loop is supposed to dequeue each image and stream it to a binary file, acheiving the maximum imaging speed possible by seperating the data acquisition from the saving routine.
However, this is not happening. The files are being queued and dequeued correctly UNTIL the acquisition for loop reaches completion (for example after 500 cycles) at which point the dequeue VI stops passing successive images to the binary write VI and just sends the last dequeued image over and over again until 500 images have been written to the binary file.
Can anyone suggest why this might be happening?
Cheers

Hi Phoenix,
The queue approach is still the best architecture for your
application. Instead of converting the image to an array, have you tried
flattening each image to a string and passing this into the que?
You can then un-flatten from the string in the non-deterministic loop.
Hope this helps,
John P
John.P | Certified LabVIEW Architect | NI Alliance Member

Itunes erased every song i've downloaded over the last six months

I just had my computer fixed and had to download itunes again then when i connected my i pood it wldnnt recognize tht it was attatched unless i selected to have the songs on this new library put on my ipod which is stupid there was no songs in the library and every song that i accumulated over the last 6 was erased i think this is an error on you programing teams side why would anyone want to erase there library just to connect to a new library and why wont it show that my ipod is connected unless i selected tht option what if i wanted tto just add a couple songs from a different library i have to erase everything i accumulated i think your songs are way to expensive i can go purchase a whole cd for 12.99 wiith 20+ songs if your store was more reasonable you would get more busn. I read in a magazine that your sales are down this year i think its because your products outdated now sony has this new mp3 player called bean holds more songs smaller and can charge in up to three mins. Also who do you think wld spend the 7500dlrs it wld take to fill one of your big ipods
Extremely disapointed and would like answers
[email protected]

<after three tries, decided that it's just not worth responding to>

Is there a short cut key/command to repeat the last action?

In excel Alt F4 (I think) repeats your last action. I can't find a similar command or short cut key in numbers. Can anyone help me?

Kappy wrote:
Isn't it supposed to be a clone of Excel within limits? I don't use iWork.
Who said/wrote that ?
Numbers is not a clone of Excel. I doesn't share the Microsoft philosophy which include every asked feature.
Apple engineers carefully select what may be added and what must remain as dreams/wishes.
Basically, they apply the good old rule :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+
At this time they offer around 250 functions when Excel have about 500.
Tables are limited to 256 * 65635 cells
Numbers is slooooooooooooooooooooooooowwwwwwwwwwwwwww
Excel offer some database features, Numbers doesn't
In Excel, macros are back, they never arrived in Numbers.
Yvan KOENIG (VALLAURIS, France) samedi 30 avril 2011 22:58:32
Please :
Search for questions similar to your own before submitting them to the community

Downloads repeat the last item requested instead of loading a new item

Similar Messages

Maybe you are looking for