DR Full recovery with issue.

Hello Experts,
I need you help and assistance for one requirement.
We are having DC-DR Setup on oracle database 10g with Physical Standby database with MAXIMUM PERFORMANCE mode.
On Primary System, our Redo log files and Control files are mirrored on 2 different Storage let’s take it a Storage A and Storage B.
-> 4 Redo log groups 2 Files in each group one on Storage A and one in Storage B.
-> 3 Control Files 2 on Storage A and 1 on Storage B.
Scenario:
In above case,
Suppose my storage A will crash and some changes which are in redo log files, which not yet archived will failed to apply on standby database which may result in DATA LOST.
As I told you that we are having mirror copy of Redo Log and control file on Storage B, so is it possible to RECOVER my LOST data on standby database with help of Redo Log file
and Control file of Storage B?
Question 1: Is it possible to apply redo log files of primary site to standby site?
Question 2: Is it possible to do full data recovery using redo log file and control file of primary database on standby site?
I need your help and assistance to get answer on above questions.
Thanks

Hello;
Question 1: Is it possible to apply redo log files of primary site to standby site?Not in Oracle 10. In Oracle 11 The ALTER SYSTEM FLUSH REDO SQL statement can be used at failover time to flush unsent redo from a mounted primary database to a standby database, thereby allowing a zero data loss failover to be performed even if the primary database is not running in a zero data loss data protection mode.
Question 2: Is it possible to do full data recovery using redo log file and control file of primary database on standby site?The simple answer is no. During a failover the Primary is unavailable. The standby becomes Primary and opens with resetlogs.
Upgrade to Oracle 11 and you have more options. If the Primary is damaged this bad you do a failover.
Best Regards
mseberg

Similar Messages

  • Windows Installation Error after Full Recovery

    Hi,
    I upgraded a Satellite A135-S4656 from a 160GB hard drive to 320GB hard drive. I did a full recovery with the recovery cd's. At the end of the recovery, I the following message:
    "Windows setup could not configure windows to run on this computer's hardware"
    After saying ok to the message above and rebooting. I get to the Windows Vista splash screen and then i get the following message:
    "Windows could not complete the installation. To install Windows on this computer, restart the intallation."
    I ran the recovery once again and went through the whole recovery - still get the same messages.
    Your help with this will be appreciated.
    Hard drive info
    Toshiba 320GB 2.5 SATA HDDR320I02X

    if you know how to partition the hdd try to split that hdd into two 50/50 and re-run system recovery again.
    =========================================================
    the only easy day was yesterday.....
    =========================================================

  • Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back o

    Recently my MacBookPro locked up on startup. Could not get past a certain point of progress bar. I had upgraded to Yosemite few weeks back, with no issues. I ended up doing a Recovery with Time Machine and I got all my apps, photos, documents, etc. back okay --- except I got error messages that my "registration for Photoshop (I use CS4 Extended) and Photo Mechanic are no longer working".  I worked on Photoshop first, and tried (several times) to fix it with their online help suggestions.  Nothing worked.
    Is there a simpler way to "get my licenses/registrations back"???  I am also going to contact Camera Bits about the Photo Mechanic issues.   Thanks

    Same problem and for months now. I haven't been able to find a solution, but I suspect that's because I don't know exactly what's wrong.

  • Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

    Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

    Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
    The usual troubleshooting steps are, also remember to test it after every step:
    1. Restart
    2. Reset
    3. Restore from backup
    4. Restore as new.
    If no joy, make an Appointment with the Apple genius and have them evaluate

  • I think you guys in apple have an issue on iTunes movies coz I only get the full screen with small black squares...

    Lost a purchased movie and when checking iTunes movies I get the full screen with small little squares and weird signs.

    We are all irunes users just like you.  You are not addressing Apple here at all.

  • Time Machine Full Recovery From Wireless Backup

    I am reporting this as a learning experience for all.
    I just had a hard drive fail on my MacBook. Apple Care was golden and now I have a clean install with Leopard.
    Here is my situation. MacBook backed up via time machine on a wireless network. Windows on boot camp partition. Dedicated disk (1TB Buffalo) connected to wife's iMac via firewire.
    I want to do a full recovery. I start up leopard and it gives me the option to do a full recovery during setup. I have no time machine backup list provided. I continue with setup. When I go to the recover option of time machine I am asked to select a file. This is when I call tech support.
    Tech Support says I should have had the backup disk connected directly via firewire for setup to see it. Time machine stores the backup under these conditions as a Sparse bundle. Now that I am past setup I have to do a migration rather than a recovery. I start up the migration assistant and I still cannot access the sparse bundle as it is grayed out. The leap here is you have to mount the sparse bundle, double click, then it shows up as a disk you can migrate from.
    Windows Partition, as TS puts it is "on its own".
    The confusion for me was that I could not recover exactly as I had backed up.
    I hope this helps someone. Cheers!

    coma53 wrote:
    It seems to be. All music, photos, applications, etc. are present. I have not had time to do a complete review of my migration, I will track this post for a while and report any problems. There were significant OS updates which were required. I thought that they would be included as part of the migrate, not so. Perhaps they are on a true "full recovery" from setup, any one know?
    Migration has no option for any part of the OS. It assumes you already have it.
    If you recover your entire system from a TM backup (assuming nothing significant was excluded), you get your entire system back exactly the way it was: the OS, Apps, settings, preferences, user data, etc.
    You don't load a new OS from the Leopard Install disc -- you only use it for it's copy of Disk Utility and the installer -- everything else comes from your TM backup.

  • ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

    iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

    Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
    For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
    System:
    Windows 7 Ultimate x64
    iTunes 10.4
    ATI 5750 video card

  • HT6114 my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhg.

    my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhgh, or if I wait a while it finally fixes it's self. If this happening to anyone else?

    I don't think that is normal behavior. The long press is possibly causing the system to force power down, which would then allow it to power back up.
    Just to make sure, all drivers are up-to-date? Are there pending BIOS updates? If so, you'll want to make sure it can restart properly before applying the BIOS update
    Try an Ubuntu LiveUSB or LiveCD to rule out software issues.
    If that doesn't work, try taking out the battery and AC, pressing the power button ten times, then holding it for ten. This is usually the remedy for another issue, but try it anyway.
    If that doesn't work, then try resetting the BIOS settings. Then try unplugging the CMOS battery overnight. Otherwise, might have to call for warranty.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • DPM is Only Allowing Express Full Backups For a Database Set to Full Recovery Model

    I have just transitioned my SQL backups from a server running SCDPM 2012 SP1 to a different server running 2012 R2.  All backups are working as expected except for one.  The database in question is supposed to be backuped up iwht a daily express
    full and hourly incremental schedule.  Although the database is set to full recovery model, the new DPM server says that recovery points will be created for that database based on the express full backup schedule.  I checked the logs on the old DPM
    server and the transaction log backups were working just fine up until I stopped protection the data source.  The SQL server is 2008 R2 SP2.  Other databases on the same server that are set to full recovery model are working just fine.  If we
    switch the recovery model of a database that isn't protected by DPM and then start the wizard to add it to the protection group it properly sees the difference when we flip the recovery model back and forth.  We also tried switching the recovery model
    on the failing database from full to simple and then back again, but to no avail.  Both the SQL server and the DPM server have been rebooted.  We have successfully set up transaction log backups in a SQL maintenance plan as a test, so we know the
    database is really using the full recovery model.
    Is there anything that someone knows about that can trigger a false positive for recovery model to backup type mismatches?

    I was having this same problem and appear to have found a solution.  I wanted hourly recovery points for all my SQL databases.  I was getting hourly for some but not for others.  The others were only getting a recovery point for the Full Express
    backup.  I noted that some of the databases were in simple recovery mode so I changed them to full recovery mode but that did not solve my problem.  I was still not getting the hourly recovery points.
    I found an article that seemed to indicate that SCDPM did not recognize any change in the recovery model once protection had started.  My database was in simple recovery mode when I added it (auto) to protection so even though I changed it to full recovery
    mode SCDPM continued to treat it as simple. 
    I tested this by 1) verify my db is set to full recovery, 2) back it up and restore it with a new name, 3) allow SCDPM to automatically add it to protection over night, 4) verify the next day I am getting hourly recovery points on the copy of the db. 
    It worked.  The original db was still only getting express full recovery points and the copy was getting hourly.  I suppose that if I don't want to restore a production db with an alternate name I will have to remove the db from protection, verify
    that it is set to full, and then add it back to protection.   I have not tested this yet.
    This is the article I read: 
    Article I read

  • Full optimize with Compress DB throws error

    Hi,
    We are using SAP BPC 7.0 MS version... We have an SSIS package scheduled every morning for a Full Optimize with Compress DB. For the past few days this package had been failing after running for 2 hours, with the following error message :
    [Error][OSoft.Services.Application.OptimizeManage.OptimizeManageCtrl]
    When we tried doing a Full optimize without compress DB or Index defragmentation from the Admin Console, it completes successfully.
    But when we try doing a Full Optimize with Compress database checked, it runs for about 2 hours and throws the following error :
    An error has occurred during processing
    Error Message : Thread was being aborted
    After the above process it leaves all the records in the fact table with source column 1.
    Can anyone please share your ideas on this issue if you have faced this before and a way to fix this.
    We do not have bad or invalid records in the fact table.

    Hi,
    Please recheck if you have any calculated members or invalid dimension members.
    Calculated members will create such problems.
    Please check you have enough free disk space on your server which has Database and Analysis Services.
    Please make sure you have enabled 3GB support in Everest Update component, if you have more than 4GB RAM in your Application server.
    Please check if you have setup the Analysis Server settings with a minimum recommended value for the
    Threadpool \ Query \ MaxThreads parameter.
    The recommended value is higher of 10 or (number of Analysis Services Databases + twice the number of processor cores).
    If you have 4 dual core processors in your Analysis Services server (8 cores) and 5 Analysis Services DB, then you must set the value as 5+(2*8)=21.
    The source column will be updated as zero when the full optimization is complete. It remains as 1 since your full optimization is not completed.
    Since it says thread is being aborted, I believe the Analysis Services server settings change might resolve your issue.
    Karthik AJ

  • Error message after Recovery with discs

    I have a Pavilion dv6911om. I had to replace the hard drive and then did a system recovery with the discs sent by HP but it failed to recover the computer. It gives me a CTOERROR.flg notepad with a bunch of information on it and from what I can tell it will not finish because my computer is offline but I have the wireless slider in the on position. HELP  - what is my next step?

    Try restarting the laptop and tapping away at the F11 key to see if the Recovery partition on the hdd was created and maybe capable of completing the install.
    If no joy,scroll down on the page and get Partition Wizard Bootable CD ISO and ImgBurn to burn the iso image to cd and boot from it. Delete all partitions, create one and format. Next try booting from Recovery Disks again.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Recovery with RMAN in case of complete lost of all files

    Hi,
    I am using RMAN in nocatalog mode to backup my databases to tape using the RMAN-Module for Legato.
    I4ve read that in case of loosing all my controlfiles i cannot easily restore the controlfiles.
    Lets assume the following scenario:
    I am performing a daily full backup with RMAN in nocatalog mode. Approx. 2 hours after the completed backup my machine crashes and all files (i.e. OS-Files, Database, Controlfiles) are lost.
    Now I have to reinstall the OS, reinstall Oracle and restore the backup.
    Due to backups made with RMAN in nocatalog mode i have the restore the controlfies prior to restore the database. Metalink says restoring the controlfile from RMAN in nocatalog mode is not that easy.
    Is there any way to restore the controlfile from RMAN in nocatalog mode in case of complete crash ??
    Thanks.
    Ronny.

    RESTORE CONTROLFILE FROM 'filename...' doesn't appear to be supported in 8i.
    What are the options for 8i?.
    I have the backup sets with me from my previous installation before crash which also contains Control files.
    However I am unclear as to how to proceed wit RMAN recovery with those files. There seems to be no way to point RMAN to those backupsets since RMAN apparently reads its information from catalog or the control file in case of nocatalog.
    I think if there is a way to atleast restore the control file from the backup set, RMAN can proceed since it will find all the other backup details there.
    Any help is greatly appreciated.
    thanks
    RP

  • As I bought my iPhone 5 16GB,White in the USA from Sprint, full price with tax,unlocked ,it was excepted to be a global phone. But now I come across with some problems in Chinausing local carrier, everything is working properly except sending text message

    Dear AppleCare,
    As I bought my iPhone 5 16GB,White in the USA from Sprint, full price with tax,unlocked ,it was excepted to be a global phone. But now I come across with some problems in Chinausing local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
    I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
    Will Apple help me with this issue? Please do.
    Information of my iPhone:
    SN:F1*******8GJ
    IMEI: ****
    MEID: ****
    ICCID: ****
    My Apple ID account:****
    <Personal Information Edited By Host>

    I had the same problem.  Kept getting message of waiting for activation or check network connections.  I also tried every solution out there and nothing worked.  This did though:  I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work).  It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer.  I let itunes find it, did a complete backup in icloud, then did a restore.  Entire process took a couple of hours, but I now have imessage and facetime back.  I was about ready to give up on Apple and go get a different phone ~

  • If your database in Full Recovery mode, can you use Bulk Insert Task to load data

    If your database in Full Recovery mode, can you use Bulk Insert Task to load data

    If your database in Full Recovery mode, can you use Bulk Insert Task to load data
    Yes you can ofourse but dont be in idea that logging will be mininal. Loggign will be as per recovery model full. Every thing will be logged. If you are going to use bulk insert task you can consider switching recovery model to Bulk logged but you will not
    have option to do point in time recovery.
    PS: please dont create duplicate threads
    If you read first Note section in below link it clearly states that yes logging will be full and you can use
    http://technet.microsoft.com/en-us/library/ms191244(v=sql.105).aspx
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • How to make netflix go full screen with multiscreen on chrome

    i have not touched my netflix since i got mavericks installed because every time i fullscreen the video it never covers the screen entirely.
    when i make my chrome window on my other monitor fullscreen there is always a small sliver that seems to be reserved for the IOS toolbar even though with flash and HTML5 video on youtube it envelopes the screen completly.  i have no idea why it does this. my only solution i found was to make the individual tab in chrome go fullscreen which hides the searchbar like fullscreening hide's IOS' toolbar but unless i am doing somthing wrong i can barley make that happen on purpose as it always seems to be a graphical hiccup that happens on accident.
    i heard of netflix switching to HTM5 which works wonderful on mavericks but i seem to be stuck with silverlight. i can easily remedy this by going out of multiscreen mode but it is a hassle as i must shut down everything i am doing to log out and log in again and while it will make netflix play fullscreen i will still get hit with the inconsistent youtube format that switches form HTML5 to flash at random which the fullscreen html5 will get rid of my main screen which defeats the purpose of dualscreen. so unless there is a way to make silverlight fill the entire screen or make mavericks accept HTML5  or even how to get chrome to fullscreen a single tab on command i am wasting $8 a month because of crappy hardware.
    and while i heard netflix works bets on safari and firefox i cant use them because netflix never seems to remember my passwords for other browsers which forces me to change the password every time i want to login elsewhere which is also a hassle.

    use the shift key in what way? as i click the fullscrene icon on chrome? as i hit the fullscreen button on netflix? or when i hit silverlight? or when i use it in conjunction with another hotkey you did not mention? please be more explicit and detailed in your solution.
    i have had this problem since i got mavericks in October 2013 and have been looking for a solution myself for the past 4 months and have found nothing. maybe i was searching wrong or asking the wrong questions but i doubt i found nothing because i was the only one with the problem. i figured that more experienced mac users and chrome users would have faced the same problem and came up with a solution already using their ingenuity and hopefully would offer me their solutions  if i asked directly.
    since you responded within 3 minutes of me posting this question and as vague as your reply was you mention the solution requires the shift key in some way i was right in assuming i was not the only one with the problem and that others have found the solution already. no hours or days required to troubleshoot this alien and unheard of technical issue on my behalf since you have done that for yourself in the past 4 months and would only require 5-10 minutes in writing out  8-16 lines of text to explain the solution. possibly 24 lines if you write out the steps as a list.
    i would not ask for help here if i found the solution myself but sadly i could not and have to turn to the community for guidance and cooperation in solving the problem, just like how humanity has solved every problem it faced and made the modern world the marvel it is today,though this sharing of information and labor that a social species such as humans would excel at.
    so how exactly do i use the shift key in expanding my chrome tab which would make my netflix go full screen with no gaps?

Maybe you are looking for

  • Install Oracle 8.1.7 on Sun 5.7 0899

    Can somebody help me with the following problem ? When installing Oracle 8.1.7 , i found the error message "Error in invoking target install of makefile /u01/app/product/817/plsal/lib/ins_plsql.mk" Does that error come from the swap space ? because i

  • Office 365 Direct Access SCCM

    Hi, Recently we deployed a bunch of laptops using SCCM (windows 8.1) but having a partial issue with Office 365 via Software Center. When laptops are within domain: - Office 365 installs during OSD - Office 365 installs via Software Center When lapto

  • Invoking operations from a jsp correlation error

    Hi, I’m a student in Informatics at the University of Turin (Italy). On December I’m graduating and so I’m finishing my stage about web services and BPEL, that actually is the object of my thesis. To realize my stage I’ve used the Oracle BPEL Process

  • R12 Hardware Sizing ...

    Hi All, Greetings to ALL !!!!! I need your valuable suggestions to set up hardware for our environment. CPU & Memoryrequirement No. of Concurrent users- 700 Online users- 4000 Load for activities other than Oracle Applications. Size of the database-

  • Missing photos on blog page

    OK... I'm loving iWeb, but having a strange time when adding photos to my blog page. I'll add a photo at the top of the new entry page, but when I go back to the blog page... or try to look at it on the web, some of the photos are there and some aren