DR server set up

Dears,
I need to set up DR server for our PRD server.As I am new to this activity,want to get some information about it.
1-Hardware configuration should be exactly same or not mandotry.
2-During installation should we have to do something additional or just install the server with same SID and instance number.
3-Host name should be same or it can differ.
4-How to transfer archive files from PRD to DR and apply them automatically.Should i have to create any script for it.
Please suggest.
Deepak.

Hi ,
If your OS is unix falvour..
Then
The Prd is up and running and it is generating logs.
Your DR is in the mount exclusive state :
Make these two systems trust each other.
And have a script at the Prd which is simple copy of the these archive files to the DR system.
Make it run at the cron tab every 5 min...
Then in the inthe Dr insatnce have recovery script which again runs from Crontab every 5 min.
If iot finds logs it just applies those logs to the DR DB.
So no mannual intervension is required once this is set correctly like files are copied correctly and the permissions are correctly maintained etc.
And also I think there are other ways to do this ...As DB's are capable of copying the logs at mutiple locataions same time when it gets generated.
Thanks.

Similar Messages

Home Server Set Up - DNS, DHCP etc

Hi
I'm looking to set up a Mountain Lion Server at home.
I have a Lion Server but I think I will wipe it and start again, mainly because I didn't use a particularly good name to begin with. I've read the We Got Served Mountain Lion Server book, Mountain Lion Server for Dummies and Apples Documentation.
I am planning to set up in the following way:
Turn my Virgin Media router 'Modem Only' mode on.
Turn on my AirPort Extreme and set it up as the DHCP server.
I will set up a pool of IP addresses.
Question 1 - I think the best way is to make a reserved IP address for my server within this pool rather than a static IP address outside of the pool (but within the subnet). Any comments on this?
Question 2 - I need to boot my Lion Server to get the MAC address for the reservation. Should I set the reservation IP as the IP the DHCP server provides or set it up to an unused IP address? I will set up DHCP to distribute DNS server names.
Question 3 - Because I want my Mountain Lion Server to provide Directory Services I need to set up the Mountain Lion Server as a DNS server. Is this correct?
The DNS servers I will get the DHCP server to provide in the following order:
1 My Mountain Lion Server
2 My 1st Virgin Media DNS Server
3 My 2nd Virgin Media DNS Server (not sure I can set up a 3rd DNS server)
I am not going to use a Google DNS or another open DNS because they are located in the US and this affects caching of internet content.
When I set up my Mountain Lion Server I am in two minds about going for a public internet registered domain or a private domain.
Question 4 - Are there any limitations in using the registered public domain as opposed to a private domain with VPN. If I need access to any of my machines remotely I tend to use LogMeIn form my iPad. But I am tempted (just because its there) to set up a public internet address and using it. If I did go for the public domain I would need to use a dynamic DNS service (like Dyn.com) because I don't have a static IP. However if I didn't I would only need to change my public DNS entry if I rebooted my router (and I may not even then as its IP address may not be reassigned).
If I don’t need remote access to my server very often then this would be acceptable.
Question 5 - If I did go the full internet way (as opposed to the .private domain) what do I register at dyn.com? Just my domain, then add a record for the server.
1. Register ‘example.com’
2. Add a record at Dyn.com for ‘server.example.com’.
3. On my server set up put ‘server’ in the Computer Name field
4. On the ‘Host Name’ field enter ‘server.example.com’.
Question 6 – Bonjour and DNS. Aside from whether I go for a public registered domain or a private domain (and access via VPN or LogMeIn) how do these settings affect the Bonjour set up? My understanding is the Bonjour uses .local. So what is the resolution path? If I set up a DNS server on my Mountain Lion Server do I need to enter a record for each local laptop in the house or can I leave that to Bonjour? My understanding is the Bonjour will continue for all local address resolution and the Mountain Lion DNS will take care of resolving the server name (for Directory Services and any other services). Is this right will DNS be used for file and print services on the server?
Any thoughts/answers/comments/casual abuse welcome.
Thanks

Hi
I'm looking to set up a Mountain Lion Server at home.
I have a Lion Server but I think I will wipe it and start again, mainly because I didn't use a particularly good name to begin with. I've read the We Got Served Mountain Lion Server book, Mountain Lion Server for Dummies and Apples Documentation.
I am planning to set up in the following way:
Turn my Virgin Media router 'Modem Only' mode on.
Turn on my AirPort Extreme and set it up as the DHCP server.
I will set up a pool of IP addresses.
Question 1 - I think the best way is to make a reserved IP address for my server within this pool rather than a static IP address outside of the pool (but within the subnet). Any comments on this?
Question 2 - I need to boot my Lion Server to get the MAC address for the reservation. Should I set the reservation IP as the IP the DHCP server provides or set it up to an unused IP address? I will set up DHCP to distribute DNS server names.
Question 3 - Because I want my Mountain Lion Server to provide Directory Services I need to set up the Mountain Lion Server as a DNS server. Is this correct?
The DNS servers I will get the DHCP server to provide in the following order:
1 My Mountain Lion Server
2 My 1st Virgin Media DNS Server
3 My 2nd Virgin Media DNS Server (not sure I can set up a 3rd DNS server)
I am not going to use a Google DNS or another open DNS because they are located in the US and this affects caching of internet content.
When I set up my Mountain Lion Server I am in two minds about going for a public internet registered domain or a private domain.
Question 4 - Are there any limitations in using the registered public domain as opposed to a private domain with VPN. If I need access to any of my machines remotely I tend to use LogMeIn form my iPad. But I am tempted (just because its there) to set up a public internet address and using it. If I did go for the public domain I would need to use a dynamic DNS service (like Dyn.com) because I don't have a static IP. However if I didn't I would only need to change my public DNS entry if I rebooted my router (and I may not even then as its IP address may not be reassigned).
If I don’t need remote access to my server very often then this would be acceptable.
Question 5 - If I did go the full internet way (as opposed to the .private domain) what do I register at dyn.com? Just my domain, then add a record for the server.
1. Register ‘example.com’
2. Add a record at Dyn.com for ‘server.example.com’.
3. On my server set up put ‘server’ in the Computer Name field
4. On the ‘Host Name’ field enter ‘server.example.com’.
Question 6 – Bonjour and DNS. Aside from whether I go for a public registered domain or a private domain (and access via VPN or LogMeIn) how do these settings affect the Bonjour set up? My understanding is the Bonjour uses .local. So what is the resolution path? If I set up a DNS server on my Mountain Lion Server do I need to enter a record for each local laptop in the house or can I leave that to Bonjour? My understanding is the Bonjour will continue for all local address resolution and the Mountain Lion DNS will take care of resolving the server name (for Directory Services and any other services). Is this right will DNS be used for file and print services on the server?
Any thoughts/answers/comments/casual abuse welcome.
Thanks

How does a server set SoapFault parameters?

If a SOAP server encounters errors and needs to pass some data back to a SOAP client
by way of the client receiving a weblogic.soap.SoapFault, how can the server set
the value for <faultcode> and <faultstring>?
How method does a SOAP client use to get the retruning XML containing the SoapFault?
T Tse

@GJ - thx -- I knew that-subconsciously! i just didn't put it all together
@test - well, i'm in the process of studying Thom Parker's scripting course,
so hopefully i'll learn how to do that soon .
but meantime - it's a combination of client-side/server-side scripting?
So would youse criticque my summary understanding of the flow of the process?
client requests -> server serves the pdf -> client fills out form on their machine ->
(requiring that they have "some" pdf application installed, or invite them to dL/install Adobe Reader, etc)
script embedded in the form button "Submit" causes the now-changed-data-filled-out-pdf
to be "returned/received" back on the server in changed form -- ->
either to be manually gathered/downloaded by me,
or, by further scripting, auto-magically returned to my email, etc?
w/ the scripting "Notifying me that the client has completed & returned the form" ?
---- more ----
and if i think about it further -- would a server even be needed? how about all transactions strictly via email?
since the "volume" will be pretty low
send email attachment, then "Submit" scripted button invokes their desktop email client if they have one,
or just give the instruction to re - send the now-filled-out pdf, as an attachment, back to my email --- ?

Server setting to gracenote cddb for Adobe Audition 3.0?

I was wondering if anybody knew the server setting to gracenote cddb in Audition 3.0 for ripping CD Audio? I know the one for free cddb, but I think gracenote has a better success rate based on other web based software.
I asked this question in another post titled, "Saving MP3 file wipes out Genre value" but since it is a little bit older I thought not that many people would see it too good. Thanks for any response ahead of time.

I usually use freeDB as well. You can set the HTTP Titles Database setting to freedb.freedb.org
If you aren't receiving track titles, something is definitely amiss. Perhaps the parsing variables in the configure dialog have been changed or deleted.
The default value for "Parse Song Title" should be %s
The default value for "Filename Template" should also be %s
If these are correct and you still do not see song titles, please let me know and we'll continue troubleshooting. It would be a pretty useless feature if the titles didn't show up!
Thanks,
Durin

Upgrade to Firefox now defaults to a proxy server setting - how do I stop this???

I use Windows XP and Earthlink is my internet provider. About a week ago I downloaded the upgrade to Firefox. Since that time, everytime I connect to the internet I get the error that Firefox is trying to connect thru a proxy server - I do NOT work thru a proxy server. I have to go into internet options in my control panel, go to connections and remove the proxy server checks in both the dial-up settings and the LAN settings. THIS DID NOT NEED TO BE DONE PRIOR TO THE UPGRADE!! I tried to go back in my computer settings to a date prior to the upgrade, but that did not change anything. HELP!! What can I do to stop Firefox from defaulting to a proxy server setting???? Earthlink tells me that this is not an Earthlink problem, that it is being caused by the Firefox explorer.

You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

TS3988 what is the iCloud incoming mail server setting?

what is the iCloud incoming mail server setting?

imap.mail.me.com - but you shoudn't need to enter this manually. If you are having problems, sign out in System Preferences>iCloud, then sign back in again and enable Mail in the checklist. Your data will disappear from your Mac when you sign out but will return when you sign back in.

ICloud incoming mail server setting.

I'm not getting iCloud email and the incoming mail server setting (p99-imap.mail.me.com) is dimmed out and not editable. Ideas?

Chris CA wrote:
CAP2010 wrote:
Unfortunately, no matter what I type into the incoming email server while attempting to recreate my account in Mail, the program always tries to connect to p99-imap.mail.me.com.
You don't have to type any server info for your iCloud account.
System prefs > Mail, Contacts & Calendars - New account and select iCloud.
Unfortunately, that was step 1 in the process of not being able to use my mail in iCloud. Also, I have tried changing my password to 8 numbers/letter, etc. in accordance with the new AppleID rules, but that did not work. I have also tried deleting and recreating my account multiple times. I am definitely willing to try any more suggestions.

Thunderbird does not accept correct imap server setting.

Hello,
I need to set my mail.com account but Thunderbird sets email.com because my email is [email protected] but the server is imap.mail.com and I can NOT set it without Thunderbird blocking me with it´s retarded autoconfig which appearently DOES NOT WORK.
It should be possible to disable a malfunctioning autoconfig and let the user decide to put in settings if it fails to connect instead of blaming a wrong password because it sets the wrong server setting automatically!
How do I disable this forceful autoconfig?
Please fix this or tell me a workaround for that bug,
thx,
fred

I just figured it out.
In the config it said [imap] (like a button) .email.com. Same with smtp. I thought that I dont have to write imap before that .email.com because it was written left of it (had that in some other configs like that already who worked like that) and just tried to change the .email.com into .mail.com and that caused the error message.
So basicly I just had to fill in imap and smtp infront and then it worked.
Kinda weird... 99 % of those servers start with imap so why does Thunderbird just put .emailserver.com instead of imap.emailserver.com... Well anyways thats what mislead me.
Now it says email.com doesnt accept encrypted passwords even though it works on phone and tab with encrypted passwords... well thats not a mozilla thing, I guess.
thx anyways

Server setting preventing .jar from being read/executed?

Hey guys,
I'm not completely sure this is the correct place to be posting my question, but I have been unable to find a better place for it, so hopefully someone here might be able to help me out.
Ok.
I have a signed .jar applet, that runs locally and when hosted on a server on the LAN. It also works when the .jar is hosted on my webspace given by my ISP.
However, I have a website hosted where, for some reason, the applet fails. Furthermore, it only fails when it is packaged in a .jar archive. When only using .class files it works fine, however because I need to use .jar files in order to sign them this is no longer sufficient. The exception given by the java console is :
java.lang.ClassNotFoundException: UserInterface.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:http://www.nickmoores.com/applet/sudoku/UserInterface/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: UserInterface.class
When I set the trace level in the java console to 5, the first exception that appears is :
java.io.FileNotFoundException: http://www.nickmoores.com/applet/sudoku/sudoku.jar
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.PluginURLJarFileCallBack.downloadJAR(Unknown Source) .... etc etc etc
To me, this indicates that it can't find the .jar. However all the web browsers I have tried manage to find the file at the URL given by the exception (ie http://www.nickmoores.com/applet/sudoku/sudoku.jar), so it is not a simple case of having misplaced the jar or giving the wrong path.
I made a simple .html page with the following html code :
<!DOCTYPE HTML PUBLIC
"-//IETF//DTD HTML LEVEL 1//EN">
<HTML>
<HEAD>
    <TITLE>Blank HTML Level 1 Page</TITLE>
    <META HTTP-EQUIV="Content-Type"
          CONTENT="text/html; charset=utf-8">
</HEAD>
<BODY>
     <object classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" name="SudokuApplet"
               width="393" height="327"
               codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_5_0-windows-i586.cab#Version=1,5,0,0">
          <param name="codebase" value="/applet/sudoku/" />
          <param name="archive" value="sudoku.jar" />
          <param name="code" value="UserInterface.class" />
          <param name="type" value="application/x-java-applet" />
          <comment>
               <embed name="SudokuAppletFF"
                       archive="sudoku.jar"
                       codebase="http://nickmoores.pwp.blueyonder.co.uk/applet/sudoku/"
                       code="UserInterface.class"
                       width="393"
                       height="327"
                       type="application/x-java-applet"
                       pluginspage="http://java.sun.com/j2se/1.5.0/download.html">
                    <noembed>No Java Support.</noembed>
               </embed>
          </comment>
     </object>
</BODY>
</HTML>I placed this page at my ISP webspace, my local LAN server, and the hosted site where it doesn't work, and put the .jar in the appropriate location on each server.
As expected, it works everywhere EXCEPT the hosted website. This convinced me that there is a problem on the hosted website that is somehow preventing the .jar archive from being read from object/embed html tags. This seems strange as it manages to read and load .class files fine.
I have communicated several times with the people who are hosting my site, and they haven't been too helpful so far. I've had several replies along the lines of "Can you try it now? I think it should be working" and "Have you tried testing it on a local site?", so i'm not sure they really know what the issue is.
So does anyone know what setting on the server would be preventing the .jar from being loaded?
If anyone wants to see the problem for themselves, the problem occurs at http://www.nickmoores.com/blanktest.html , but it works at http://www.nickmoores.pwp.blueyonder.co.uk . As you will see from the page source, the code is exactly the same, so it must be a server setting causing the problem, right?
Thanks guys!

Try this:

<object classid="java:**.class"
type="application/x-java-applet"
archive="**.jar"
height="350" width="550" >
<param name="code" value="***.class" />

<param name="archive" value="***.jar" />
<param name="persistState" value="false" />
</object>

Getting message cannot send mail check server setting

Trying to get email to send out, but getting a message saying cannot send...check outgoing server setting...
Anybody???
Penni

Do you have any other mail accounts on your iPad? If so you can select another server from the options.
Go to settings again and select Mail, Contacts, Calendars. Then select your mail account from the window on the right side. Then tap on the email address of the account to open the next window that shows the account information. Then there should be heading titled Outgoing Mail Server. You can tap the arrow to the right of the server name in that field to get to the next window that shows other servers. Try to select one from there and see if that works.
I keep forgetting about this as well. It has provided help to others.
http://mail.google.com/support/bin/answer.py?answer=77702
Message was edited by: Demo

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB.

I have a lion server set up to host storage for time machine backups. Is there a limit to how many different computers can back up to the single server to back up. I am only backing up the users folders . The backup drive is an external Drobo with 6 TB. Right now it seems to back up my users all day long. I set their time machine interval to every 5 hours but it still runs all day long and is very slow. Server is on a new Mac Server mini.

AFAIK, there is no user limit.. it is simply a question of the network load. AFP is a fairly clean protocol.. but TM is not.. it does a lot of testing of the backup.. infact your setting of 5hour gap could well make it worse.
I would sort out the clients that are doing 100GB backups to a different backup location.. no matter how fast your network.. 100GB takes time to backup.. and over wireless forever.. it will never end.
I guess some of these clients are on wireless?? I would separate the TM of wireless to those that are wired. No more than 4 or 5 wireless clients to a target device. Otherwise you are saturating your network with backup data. And use 5ghz.. so close by.. it is much faster than 2.4ghz and you will get much better transfer rates.

Ichat cannot change server setting, cannot connect

iChat cannot connect. Read it somewhere that I should change server setting from 5190 to 443 after logging out. But the server setting will auto and immediately change back to 5190. Won't let me change to 443. Please help. Thank you.

Hi,
"Safe" is a relative term here.
iChat, when you restart it will recreate them.
com.apple.ichat.AIM.plist (or the Jabber one) only hold the Login details and will force a fresh login to the relevant server.
com.apple.ichatAgent.plist This holds surprising little info. Mainly it holds the info order for the iTunes is Playing script (Artist, Album and Track etc.). It holds the default Idle time (and then of course if you are Idle)
As iChatAgent actually does the login is hold pointers to the other .plists.
com.apple.ichat.SubNet.plist Holds the Bonjour info (or rather where to get it in the Address Book).
The Status Messages one does what it says. It will hold all the Status Messages you have Created and decided to Keep.
com.apple.ichat.plist This holds everything else. Everything in the Preferences accept the Account Pane.
SOme of the Menu Items depending which window is Front.
Examples. The Sort Order of your Buddy listt from the View Menu (when the Buddy List is "front". This can be a 2 pass setting (As in Avaible and Alphabetical). The capabilities shown in the Connection Doctor. (Video Menu).
It does hold a list of all the account you have in the Preferences and some info is then pulled to Display the Accounts in the iChat Menu and the Buddy List windows in the Window Menu
Most important it holds the default or other Font you chose in Messages in the Preferences, whether that font is Coloured, the colour of the IM Background (Balloons or other style). (Which Style form the View Menu > Messages). Whether you are saving transcripts of the Text Chats, and in iChat 5 what part of an old chat it displays.
If you were using Incoming Overrides you lose that setting.
All your Alerts settings both Globally set in Preferences > Alerts and those set in a Buddy's Info Card
I could probably list more.
If you have a problem then it pays to tackle the .plist one at a time so that you know which one "Fixed" it.
Deleting them all in one go is often too heavy handed.
When I have a clear idea as to which one may be causing the issue I will list that one only.
8:57 PM Friday; January 13, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

Prevent x-server setting display brightness

Hi,
i have a laptop with a ati radeon hd 4200 and i'm using the catalyst driver. I have also laptop-mode-tools installed to adjust the display brightness which works fine but every time the x-server is started the brightness is set to 100% so the brighness adjustment of laptop-mode-tools is quite useless, because it is set before the x-server is started.
My question is, is there a way to prevent the x-server setting the display brightness?

I have neither gnome nor another DE installed, just X with dwm. It seems that the brightness is set by X. The workaround i am using now is
if [ "$(< /sys/devices/platform/smapi/ac_connected)" = 0 ]; then
xbacklight -set 17%
else
xbacklight -set 40%
fi
in my .xinitrc.

Remote and testing server set up

I want to upload to the server some php pages containing a registration form, log in, and membership directory. I am able to get everything working ON MY COMPUTER (not shouting - just for emphasis) using wamp server. I am completely confused about how to get it on the server. I have tried creating a test database at the server but I am confused about how to connect. Do I need to set up both a remote and a testing server in the site setup on DW (CS5.5)? I think the problem is with the database setup form, that is, databases - + - mySLQ connection. What do I put in the form fields?
So far, I have tried, among other things,
Connection name: myusername_testform
mySLQ connection: localhost
Username: the one I set up at the server
Password: the one I set up at the server
Database: myusername_testform
and I get the following error message when I test it:
HTTP error code file not found etc.
possible reasons:
1. There is no testing server running on the server machine.
2. The testing server specified to this site does not map to the the http://ftp.mysite.com/_mmserverscripts/MMHTTPDB.php URL. Verify that the URL prefix maps to the root of the site.
I have contacted the server and have tried to understand their answers but have had no success in getting this done.
Any help would be much appreciated. I am really new to php and forms and databases, so please keep it as simple as possible. Thanks

Thanks very much for responding. Sorry - I'm not quite sure what you mean. I initially did all the set up steps (set up local server, create database in wamp phpMyAdmin, create a members directory, create a registration page, create a log in form) and I got all of that to work on my computer. Now I want to upload the forms and database to the server. Rather than use the database that I had originally set up on my computer, I set up a new test one with with one table and only a few categories using the phpMyAdmin on the control panel for the site. Where is that database? Is it at the server? What I'm confused about is this: How do I connect to the database at the server? Do I need to set up the site the same way as I did when it was only on my computer, i.e., set up a remote server AND a testing server? Or do I just need to set up the remote server? In either case, how do I add the database to the site using mySQL connection? I think the problem is with what I type into the form field "my SQL connection" but I really don't know. I'm so confused lol

Server set up still not working

Trying to set up a new site in Dreamweaver. When I get to Server Setup I get this box, which has nowhere to click to specify a new server, etc. I was advised in an earlier post to click in the white area to the left to bring up some buttons, but can't bring up any now. So I clicked all over the place and managed to quit the program. Perhaps if I do a rain dance, the stupid thign will work.

GraphicsGeezer wrote:
which has nowhere to click to specify a new server,
What happens when you click the + button (just above the Help button)?

How to change LDAP server setting in Access Manager 6.2

Hi,
We have initially set authentication as a SunONE Directory Server 5.1 (master DS1) in Sun Java System Access Manager 6.2. In both /etc/opt/SUNWam/config/serverconfig.xml
/etc/opt/SUNWam/config/AMConfig.properties
conf files, DS1 was set initially. Also on console's Service Configuration ->LDAP->Primary LDAP Server was set as "DS1"
Now the problem is that I am not able to change the DS1 to the other master "DS2". I set DS2 in both above conf files and also the Service Configuration page as Primary LDAP Server. I restarted the server. When I stopped the DS1, I couldn't login access manager console with any user. It looks like it is still trying to get authentication from DS1.
Does anybody know what I am missing here?
Regards,

After hopeless tries, I finally made it work;) The trick was actually updating the sunKeyValue attribute of the entry:
"dn:ou=default,ou=OrganizationConfig,ou=1.0,ou=iPlanetAMAuthLDAPService,ou=ser
vices,dc=company,dc=com" in one of the master DS I have.
Even though I set DS2 and loadBalancer hosts in all conf files and in Primary LDAP conf in amconsole's Service Configuration, it just didn't work until I inserted loadBalancer host in sunKeyValue attribute.
Hope it helps to someone....
-Bora

DR server set up

Similar Messages

Maybe you are looking for