Dr. Watson error trying to generate report

I am running Sun Java System Web Server 6.1 SP5 on Windows Server 2003 with SP1 which has been locked down using the Bastion Host server role from the Windows Server 2003 Security Guide. When I try to generate a report on the web site statistics through the Server Manager (web admin console) I get the pop-up screen which says:
Starting analysis
Attempting to run:
D:/Sun/WEBSER~1/WEBSER~1.1/extras/flexanlg/flexanlg -F -n acol-prod2.acol.ca -i D:/Sun/WEBSER~1/WEBSER~1.1/HTTPS-~2/logs/access -o c:\stat.txt -c hnrfeuok -t s5m5h10 -l c+5h5 -p ctl
This may take a bit.
But the report does not get generated and I get the following error in the Event Viewer Application Log:
Event Type:     Information
Event Source:     DrWatson
Event Category:     None
Event ID:     4097
Date:          2/20/2006
Time:          9:17:06 AM
User:          N/A
Computer:     WEB100
Description:
The application, D:\Sun\WebServer\WebServer6.1\bin\https\httpadmin\bin\lganalyz.exe, generated an application error The error occurred on 02/20/2006 @ 09:17:06.313 The exception generated was c0000005 at address 77BD03BA (msvcrt!popen).
I thought this might be a permissions problem, so I tried running the Administrator Server service as the local admin account instead of Local System Account. I get the same result either way.
Any ideas on what might be causing the problem?
Thanks,
Chris

Just a little further info. I installed Windows 2003 with SP1 and the latest updates available through Windows Updates and Sun Java System Web Server SP5 on a new server. I did not do any of the security configuration lockdown as I had done on the other server. I am still getting the Dr. Watson error when trying to generate a report, but I am also getting the following error:
Event Type:     Error
Event Source:     Application Error
Event Category:     (100)
Event ID:     1000
Date:          2/23/2006
Time:          1:42:16 PM
User:          N/A
Computer:     WEB100-TEST
Description:
Faulting application lganalyz.exe, version 0.0.0.0, faulting module msvcrt.dll, version 7.0.3790.1830, fault address 0x000303ba.
Hope this helps!
~Chris

Similar Messages

Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Error messages while generating reports

I am using CR XI SP4 and i get the following message when generating reports:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt:
Unknown Database Connector Error---- Error code:-2147482942 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException (Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.t.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
In the RAS log file i see:
ErrorLog 2009 7 21 17:45:16.188 732 3648 (\servers\ras\dtsagent\cdtsagent.cpp:3113): CDTSagent::doOneRequest reqId=250: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:13209 ErrorCode:706 ErrorMsg:"Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt: Unknown Database Connector Error"
Any assistance would be appreciated
Thanks

hi,
You are able to login in to application, Means your authentication is working.
Open RPD in online mode and try to view data.
Check your connection pool setting in General tab.
Check you have selected appropriate Data Source Name, Call Interface.
Thanks,
Sainath Baludu.

Error trying to generate addmrpt (ADDM Report) on Oracle 10.1.0.4

Hello,
When I launch $ORACLE_HOME/rdbms/admin/addmrpt.sql on my Fedora 3 Oracle 10g connected using sys as sysdba (or system), I get the following error :
Specify the Begin and End Snapshot Ids
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Entrez une valeur pour begin_snap : 210
Begin Snapshot Id specified: 210
Entrez une valeur pour end_snap : 211
End Snapshot Id specified: 211
Specify the Report Name
~~~~~~~~~~~~~~~~~~~~~~~
The default report file name is addmrpt_1_210_211.txt. To use this name,
press <return> to continue, otherwise enter an alternative.
Entrez une valeur pour report_name :
Using the report name addmrpt_1_210_211.txt
Running the ADDM analysis on the specified pair of snapshots ...
begin
ERREUR a la ligne 1 :
ORA-13711: Des statistiques de cle sont absentes de certains cliches dans la
plage [210, 211].
ORA-06512: a "SYS.PRVT_ADVISOR", ligne 1283
ORA-06512: a "SYS.DBMS_ADVISOR", ligne 190
ORA-06512: a ligne 27
Generating the ADDM report for this analysis ...
ERROR:
ORA-14552: operation DDL, COMMIT ou ROLLBACK interdite dans une instruction DML
ou une interrogation
ORA-06512: a "SYS.PRVT_ADVISOR", ligne 1750
ORA-13608: Le nom de tache ou d'objet NULL n'est pas valide.
ORA-06512: a "SYS.DBMS_ADVISOR", ligne 569
ORA-06512: a ligne 1
Any help to solve this problem ?
Oups, when I use awrrpt on the same snapshot, I get a correct report.
Regards,
Freddy

Please refer to the patchnote.htm that is bundled with 10.1.0.4.0 patch set. Only you are aware of what type of database configuration you have. You will want to pay close attention to "7.2.1.3 Set the SHARED_POOL_SIZE and JAVA_POOL_SIZE Initialization Parameters" and "7.2.2 Upgrade the Release 10.1 Database".
Basically, I believe you have missed these required steps after installing the 10.1.0.4.0 patch set from the OUI:
(pasted from the patchnote.htm)
13.     Enter the following SQL*Plus commands:
14.     SQL> STARTUP UPGRADE
15.     SQL> SPOOL patch.log
16.     SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
17.     SQL> SPOOL OFF
18.
19.     Review the patch.log file for errors and inspect the list of components that is displayed at the end of catpatch.sql script.
This list provides the version and status of each SERVER component in the database.
20.     If necessary, rerun the catpatch.sql script after correcting any problems.
21.     Restart the database:
22.     SQL> SHUTDOWN
23.     SQL> STARTUP
24.
25.     Run the utlrp.sql script to recompile all invalid PL/SQL packages now instead of when the packages are accessed for the first time. This step is optional but recommended.
26.     SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\utlrp.sql

Errors in the generated reports

When I run a report for Management 3 - Updates in a deployment, SCCM will generate all the data except in a few areas. On the main report I get #Error in Collection Name, then if I click on a particular update I get #Error for all 3 states. If
I go further and click on one of the states, I get #Error in all the Error Descriptions.
I'm trying to get a good weekly report to send to my boss that shows what updates were pushed in a package, and what clients have and haven't installed each update, I can get a default report that shows all updates in a package and that's great, but
I can't generate a new custom report
When I try to create a custom report I get the following error:
The requested object information could not be retrieved. Refresh the Configuration Manager console to verify that another administrator has not moved or deleted the object, or that the role-based administration security scopes or security roles for
the object or current user have not changed

No, we never did. We ended up calling Microsoft and they spent HOURS on remote sessions trying to get it cleared up. They were thinking it was part of our SQL Database that was corrupt, and we ended up having them come onsite and reinstall
Config Manager.

Error trying to print report to both pdf and network printer

Hi all,
When trying to print a report to my network printer or to pdf I get the two errors attached, one right after the other. The resulting pdf or hard copy has almost everything in it, except for three tables which are completely missing. When I go back into the report and open the page with the missing table, the table is no longer visible in the report and I get the second error again. Exiting and restarting diadem brings the tables back.
I've found several threads about pdf and other print errors and tried the solutions there to no avail; specifically the one posted here.
I hope there is a fix to this! These reports are intended to sell management on diadem! Thanks!
OS Info:
Windows 7 64 bit SP1
18GB RAM
DIAdem Info:
Version: 11.3.0f4563
USI: 1.9.1f4681
DataFinder: 3.0.0f4681
Script Engine:
5,5,0,5207
Debugger: 6,0,0,8424
CLAD
Solved!
Go to Solution.
Attachments:
diadem print error 6-7-12.png ‏17 KB
diadem print error two .6-7-12.png ‏15 KB

Hello testingHotAir,
Just to make sure, do you have administrative privileges for this machine?
Also, you have attempted these exact steps as posted by lerman?
Make sure that you are logged in as Windows administrator.
Click the Windows button and click Printers.
Right-click the Diadem pdf Export and select Properties
Click the Ports tab, then click the Add Port button.
Note: If the Ports tab is greyed out, right-click the Diadem Pdf Export icon and select Run as admin.
Select Local Port and click the New Port button.
Enter PDF1 for the new port name and click OK. Close the Printer Ports window.
Put a checkmark in the box next to the PDF1 port if it is not already checked.
Click on the Advanced tab.
Select the Spool print documents radio button to make the options below it clickable.
Clear (uncheck) the box labeled Enable advanced printing features by clicking it.
Select the Print directly to printer radio button to make the options below not clickable.
Click the Apply button, then click OK.
Important: In order for the changes to take effect, you must restart your computer.
Reboot your computer and then try to print, email, or create a pdf from Diadem.
Regards,
Jeff L.
Applications Engineer | National Instruments

Error trying to run Reports

When trying to run
some reports in SCCM
2012 R2 appears
the error below.
There is an error in XML document (1, 8555).
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
There is an error in XML document (1, 8555).
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.InvalidOperationException
There is an error in XML document (1, 8555).
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Xml.XmlException
'', hexadecimal value 0x1F, is an invalid character. Line 1, position 8555.
Stack Trace:
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

The output of the report most likely contains "weird" characters:
http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager&forum=configmanagerosd%2Cconfigmanagerdeployment%2Cconfigmanagergeneral%2Cconfigmanagermigration%2Cconfigmanagersdk%2Cconfigmanagersecurity%2Cconfigmanagerapps%2Cconfigmanagermdm&sort=relevancedesc&brandIgnore=True&searchTerm=There+is+an+error+in+XML+document+
Torsten Meringer | http://www.mssccmfaq.de

"no data found" when trying to generate report

Hi,
I have a problem when I try to generate a report. It says "no data found", but the property figures in the data collection on the host. With another property, I get the graph (Overall % CPU Utilization), but with this (Overall % CPU Idle) I get only no data found.
Ooops, worse yet. I stop the smc with es-stop -A in the server and started again with es-start -A. Now, no one of the reports works!! The one who worked, now don't!
Someone experiment the same problem? Or knows how to fix this, (I guess) "anomalous", behavior?
Please let me know, I've been with this for weeks!
Thank you in advance!
Regards,
Martin Olivella

I can make a preseted report, but if I try to make
another report (with exactly the same options as the
preseted), it gives me "no data found" once more.
Any suggestions?Are you sure you're looking at the same data points? For example, there's a "Kernel Reader" module, and a "Kernel Reader (Simple)" module... and from memory the built-in reports use the "Simple" data.
Even if you're graphing a metric that exists in both modules (i.e. 5 Minute Load Average), they're still different, so make sure you choose the correct one from the picklist when you make your own Report.
Regards,
[email protected]
http://www.HalcyonInc.com

Error trying to display reports in JRC

Hi,
We have written some rather complex reports using Crystal Reports 2008. The reports are working well within the report editor, but when we try to run them in a JRC web application, they both fail.
We have 2 different error messages:
Error
Invalid Join Tree node.
and
Error
Unexpected database connector error.
The datasource is a JDBC connection, and the same errors occur with MySQL and Microsoft SQLServer. We use an SQL Command in both reports, to call a stored procedure. We also use subreports. The datasource for both reports is fairly similar, so nothing to explain the different error messages.
After logging the queries in MySQL, I found out that Crystal Reports will send all the required querys, but JRC doesn't send a single SELECT query. The other difference is that JRC sends a CONNECT message multiple times, without sending a password.
32 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
33 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
34 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
35 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
36 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
37 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
38 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
39 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
40 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
41 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
42 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
43 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
44 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
45 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
46 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
47 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
48 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
49 Connect     Access denied for user 'demo'@'localhost' (using password: NO)
50 Connect     demo@localhost on demo
50 Query       SHOW VARIABLES
50 Query       SHOW COLLATION
50 Query       SET NAMES utf8
50 Query       SET character_set_results = NULL
50 Query       SET autocommit=1
We have written other reports using the same SQL Command to call the same Stored Procedure, and they work just fine. There is something special about those reports that we can't figure out.
We use the same JDBC connector for both the report editor and the JRC web application.
I have also written a quick-and-dirty Java viewer application, based on the CR Java Runtime 12.2.200, and the same problem occurs.
Same with previewing the reports in Crystal Reports For Eclipse 2.
Has anybody experienced a similar problem? Is there something obvious that we are missing?
Thank you,
JC
Edited by: Jean-Charles Boude on Mar 9, 2009 5:52 PM

Got round of the problem of multiple failed database logins now, by setting the database username and password to all subreports as well as the main report:
reportClientDocument.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
IStrings subreportNames = reportClientDocument.getSubreportController().getSubreportNames();
for (int i = 0; i < subreportNames.size(); i++) {
ISubreportClientDocument subreportClientDoc = reportClientDocument.getSubreportController().getSubreport(subreportNames.getString(i));
subreportClientDoc.getDatabaseController().logon(DB_USER_NAME, DB_PASSWORD);
However my main problem is still there, I get the same error message as before, and no query whatsoever is sent to the database:
090311 11:43:17        2635 Connect     demo@localhost on demo
             2635 Query       SHOW VARIABLES
             2635 Query       SHOW COLLATION
             2635 Query       SET NAMES utf8
             2635 Query       SET character_set_results = NULL
             2635 Query       SET autocommit=1
             2635 Quit
If anybody can make sense of the stack trace, there it is:
03-11@11:43:17 INFO (            ?:?)     - Time to load report /D:/FullReport2.rpt took 94 ms
03-11@11:43:17 INFO (            ?:?)     - received request: fetchReportContents
03-11@11:43:17 INFO (            ?:?)     - received request: modifyParameterFieldCurrentValuesRequest
03-11@11:43:17 INFO (            ?:?)     - received request: modifyParameterFieldCurrentValuesRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: getPromptConnInfos
03-11@11:43:17 INFO (            ?:?)     - received request: fetchSubreportNames
03-11@11:43:17 INFO (            ?:?)     - received request: fetchSubreportContents
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: fetchSubreportContents
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: fetchSubreportContents
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: fetchSubreportContents
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: setSQLLogonInfoRequest
03-11@11:43:17 INFO (            ?:?)     - received request: queryServerCapabilitiesRequest
03-11@11:43:17 DEBUG (            ?:?)     - PageViewRequestHandler has been successfully created
03-11@11:43:17 INFO (            ?:?)     - received request: fetchReportPageRequest
03-11@11:43:17 INFO (            ?:?)     - attempting to send engine request
03-11@11:43:17 INFO (            ?:?)     - successfully sent engine request
03-11@11:43:17 DEBUG (            ?:?)     - Requesting page 1
03-11@11:43:17 DEBUG (            ?:?)     - New page formatter created with view context: ViewContext (Group Path: [])
03-11@11:43:17 ERROR (            ?:?)     - detected an exception: Invalid Join Tree node.
     at com.crystaldecisions.reports.datafoundation.DFQuery.for(Unknown Source)
     at com.crystaldecisions.reports.datalayer.a.do(Unknown Source)
     at com.crystaldecisions.reports.datalayer.a.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.m.b(Unknown Source)
     at com.crystaldecisions.reports.dataengine.j.b(Unknown Source)
     at com.crystaldecisions.reports.dataengine.m.o(Unknown Source)
     at com.crystaldecisions.reports.dataengine.m.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.ContextNode.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.j.case(Unknown Source)
     at com.crystaldecisions.reports.dataengine.h.<init>(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataContext.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.new(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.try(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.int(Unknown Source)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.I(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fm(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.Y(Unknown Source)
     at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.byte(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ds.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source)
     at com.businessobjects.report.web.event.s.a(Unknown Source)
     at com.businessobjects.report.web.event.s.a(Unknown Source)
     at com.businessobjects.report.web.event.bt.a(Unknown Source)
     at com.businessobjects.report.web.event.bw.broadcast(Unknown Source)
     at com.businessobjects.report.web.event.am.a(Unknown Source)
     at com.businessobjects.report.web.a.t.if(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at org.apache.jsp.CrystalReportViewer2_jsp._jspService(CrystalReportViewer2_jsp.java:103)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
     at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
     at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
     at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
     at java.lang.Thread.run(Unknown Source)
Not sure what to do next, I guess I'll just keep digging...

Dr watson error while printing Oracle reports 6.0.5.28.0

Hi All:
I am getting this problem when I was trying to print from the perview mode of Oracle Reports(6.0.5.28.0) on Windows NT Client machine. We are using Network printer which is on Windows 2000 Server. Can you hyelp me resolve this problem.

The first thing you should do would be to get onto a supported version. We've done a lot of work in the printing area in the 6.0.8 (6i) release, particularly in the latest patch set.
If this doesn't help then you should download the drivertest utility (http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip) and follow the instructions to test the driver. Then work with support to get a bug filed.
Regards,
Danny

Error in Auto Generated Reports after upgradation from 4.5B to ECC6

Hi All,
We are currently upgraded the system from 4.5B to ECC6.
We are having many reports with report names such as
'GP0HRYGE9KG1RM5HN4WY9MXC9E4'
'GP0IZ026BMC4SX5K8BISNZ00FSV' with few syntax errors in it.
Can any one suggest whether these are any auto generared reports , as the report starts from 'GP *'.
If so, please suggest how to regenerate the same.
Thanks.
Regards,

Please check the below SAP Note:
[Note 586786 - Short dump PERFORM_NOT_FOUND with forms from SAPLJ1AY|https://service.sap.com/sap/support/notes/586786]
Regards,
Dipanjan

Error trying to generate a request code

I received the CS6 production suite and am trying to deploy it on a number of off-line machines. According to what I can make out of the instructions for the Provisioning Toolkit, I need to open the Provisioning Tool on the off-line machine and then type in:
adobe_prtk --tool=Type1Exception accept --serial=
and then the serial number I received from Adobe in order to receive a request code for activation, but when I do that, I get a "command not found" message in the terminal. I have copy/pasted the command line directly from the document. I can breifly turn the off-line machine's wireless on (although I hate to do it as it destabilizes our system) but I suspect if I do that and enter the serial number that way, then that will be the only machine I can install the package on. Any help would be appreciated.

In Creative Suite 6, users needs to be online for serialization to be successful. However if there are client
machines that are not connected to the internet, the following process, called the Type1Exception process,
can be followed to serialize a package.
This process requires generation of a keycode on the offline client machine. The keycode is then used to
generate a response code from an online machine. The response code generated using the online
machine is then used to serialize the package on the offline client machine.
This process can be used for both Retail and Volume customers.
1.On the offline client machine, generate a request code for activation by running the following command:
adobe_prtk --tool=Type1Exception --generate --serial=serialNum
where serialNum is the serial number
This command returns a 44-character request code.
2.Using an online machine. visit the AOES website:
http://www.adobe.com/go/getactivated
3.At the AOES website, log in with the Adobe ID.
4.Once authenticated, enter the Adobe serial number and the request code that was generated in step 1. Once the activation service successfully activates it, the response code is displayed.
5.Note down the response code
6.On the offline client machine, run the following command to activate the package
adobe_prtk --tool=Type1Exception accept --serial=serialNum --responsecode=responseCode --leid=LEID

Error trying to generate WSDL of webservice in JDeveloper 11.1.1.3

Hey,
Everytime I try to generate a WSDL of a webservice I get the following stack trace:
java.lang.NullPointerException
     at oracle.jdeveloper.webservices.model.java.JavaWebServiceValidator.getTypeReasons(JavaWebServiceValidator.java:882)
     at oracle.jdeveloper.webservices.model.java.JavaWebServiceValidator.getInvalidValueTypes(JavaWebServiceValidator.java:1060)
     at oracle.jdeveloper.webservices.model.java.JavaWebServiceValidator.getValidationErrors(JavaWebServiceValidator.java:241)
     at oracle.jdeveloper.webservices.model.CoreHashStructureModel.validate(CoreHashStructureModel.java:187)
     at oracle.jdeveloper.webservices.model.generator.Validation.action(Validation.java:65)
     at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:143)
     at java.lang.Thread.run(Thread.java:619)
I'm able to run this webservice via run and debug as well as "Test this webservice." It's just when I try to generate the WSDL from within jdeveloper that I get this message. I'm even able to view the WSDL file within the browser by adding ?WSDL at the end of the url for the web service endpoint. Any ideas?

So, I need to have the @XmlSeeAlso() for this service to work since it relies on outside classes to run. But, I did remove the @XmlSeeAlso() from the class just to see if this would allow JDeveloper to generate the WSDL and when I do this I get the following stack trace:
oracle.jdeveloper.webservices.tools.WsdlValidationException: java.lang.NullPointerException
     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.newWsdlValidationException(WsaAdaptor.java:825)
     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.createWsdl(WsaAdaptor.java:376)
     at oracle.jdeveloper.webservices.tools.WebServiceTools.createWsdl(WebServiceTools.java:388)
     at oracle.jdeveloper.webservices.model.java.generator.CreateWSDL.createWSDL(CreateWSDL.java:281)
     at oracle.jdeveloper.webservices.model.generator.CommonCreateWSDL.action(CommonCreateWSDL.java:59)
     at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:143)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.j2ee.ws.common.tools.api.ValidationException: java.lang.NullPointerException
     at oracle.j2ee.ws.tools.wsa.JavaToWsdlTool.genWSDL(JavaToWsdlTool.java:1079)
     at oracle.j2ee.ws.tools.wsa.Util.genWSDL(Util.java:1559)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.jdevimpl.webservices.tools.wsa.Assembler$2$1.invoke(Assembler.java:218)
     at $Proxy42.genWSDL(Unknown Source)
     at oracle.jdevimpl.webservices.tools.wsa.WsaAdaptor.createWsdl(WsaAdaptor.java:372)
     ... 5 more
Caused by: java.lang.NullPointerException
     at oracle.j2ee.ws.common.jaxws.wsdl.WSDLTypesGenerator.generateGlobalElement(WSDLTypesGenerator.java:308)
     at oracle.j2ee.ws.common.jaxws.wsdl.WSDLTypesGenerator.generateWrapperGlobalElements(WSDLTypesGenerator.java:226)
     at oracle.j2ee.ws.common.jaxws.wsdl.WSDLTypesGenerator.generateTypes(WSDLTypesGenerator.java:134)
     at oracle.j2ee.ws.common.jaxws.wsdl.WSDLGenerator.generateTypes(WSDLGenerator.java:236)
     at oracle.j2ee.ws.common.jaxws.wsdl.WSDLGenerator.generateWsdlForOnePortType(WSDLGenerator.java:190)
     at oracle.j2ee.ws.common.jaxws.wsdl.WSDLGenerator.generate(WSDLGenerator.java:157)
     at oracle.j2ee.ws.tools.wsa.JavaToWsdlTool.genWSDL(JavaToWsdlTool.java:1074)
     ... 13 more
Edited by: user12883803 on Jun 25, 2010 7:02 AM

Why does labview generate Dr. Watson error "C0000005 access violation"

I am running Labview 5.1.1 in Windows 2000 Professional on a machine with the following configuration
*----> System Information <----*
Computer Name: ANDANTE
User Name: Administrator
Number of Processors: 2
Processor Type: x86 Family 6 Model 8 Stepping 3
Windows 2000 Version: 5.0
Current Build: 2195
Service Pack: 4
Current Type: Multiprocessor Free
I have all of a sudden begun to experience labview crashes. The crash occurs systematically after tens of minutes; not just a few minutes, but not more than an hour or so. I am running a vi but not actively interacting with the machine (no other applications running, not even moving the mouse around). The problem happens even when running a vi that I have run successfully for extended periods of time (overnight) only 3 months ago. I have tried it with two different vis, one that I have recently made a lot of modifications to and another that has not been touched for months (since before the crashes began), and it happens with both vis. They do much different things (communicate with different GPIB or PCI boards, write to different kinds of files in different locations, etc.), so the problem seems to be vi-independent.
When the crash occurs, I see a dialog appear with the error
labview.exe has generated errors and will be closed by windows. You will need to restart the program. An error log has been created.
The Dr. Watson error log is generated and the error is
Application exception occurred:
App: (pid=1160)
When: 4/25/2004 @ 01:57:56.640
Exception number: c0000005 (access violation)
I always get the same Dr. Watson error information -- i.e., it is very reproducible. I don't really know how to interpret the rest of the Dr. Watson log, but I include the report on the first thread, which is the one with the "FAULT" in it, at the end of this email.
Looking around on the web, it may be that a temporary virus infection could have created the problem. In the period since the machines was last successfully used, I have seen two files be infected by the W32.Welchia.B.Worm virus, the files were svchost.exe and WksPatch[1].exe. These files have been quarantined and no other infected files have been found since this error began to appear.
Any ideas? I've seen on the web that reinstalling Windows 2000 and/or upgrading to Labview 7.0 might solve the problem, but it would be nice to get some confirmation before taking the time/spending the money.
Here is the state dump for the thread with the FAULT in it, as provided by Dr. Watson:
State Dump for Thread Id 0x574
eax=00000062 ebx=00000000 ecx=00000000 edx=00000004 esi=00000000 edi=05692214
eip=00748236 esp=0012fb28 ebp=0012fb28 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: StrLen
00748230 55 push ebp
00748231 8bec mov ebp,esp
00748233 8b4d08 mov ecx,[ebp+0x8] ss:00ba9a0e=????????
FAULT ->00748236 8a11 mov dl,[ecx] ds:00000000=??
00748238 8d4101 lea eax,[ecx+0x1] ds:00a79ee6=????????
0074823b 84d2 test dl,dl
0074823d 7407 jz GetCDReg+0x6f6 (00750c46)
0074823f 8a10 mov dl,[eax] ds:00000062=??
00748241 40 inc eax
00748242 84d2 test dl,dl
00748244 75f9 jnz CfgRemove+0x44f (0074ae3f)
00748246 2bc1 sub eax,ecx
00748248 48 dec eax
00748249 5d pop ebp
0074824a c3 ret
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0012FB28 00737A74 00000000 00000000 05692214 00000400 !StrLen
0012FC40 00736A45 050753E4 05692214 0012FC6C 00736724 !SetKeyboardHandlerProc
0012FC50 00736724 05692214 0012FCB4 05692214 BDBC0000 !SetKeyboardHandlerProc
0012FC6C 00736627 05692214 0569232C 00000400 00000000 !SetKeyboardHandlerProc
0012FC98 0074B470 0012FCB4 BDBD0001 00000000 0569E8E0 !SetKeyboardHandlerProc
0012FCD0 0074ACD0 00000000 0074AC10 0569FFA4 010A2418 !CfgRemove
0012FCE8 007808D5 00000000 00000000 00000001 00000000 !CfgRemove
0012FD08 007ACEB6 00000000 00000000 77E18F95 00000000 !ChkOccurrences
0012FD9C 006033DE 00000001 00000000 77E2ADC1 007A5C80 !WMainLoop
0012FF24 007B2186 00400000 00000000 00000001 00000001 !WMain
0012FFC0 7C581AF6 005C0057 0061006C 7FFDF000 C0000005 !inp
0012FFF0 00000000 007B2030 00000000 000000C8 00000100 kernel32!OpenEventA
*----> Raw Stack Dump <----*
0012fb28 40 fc 12 00 74 7a 73 00 - 00 00 00 00 00 00 00 00 @...tzs.........
0012fb38 14 22 69 05 00 04 00 00 - 16 4d 65 74 68 6f 64 20 ."i......Method
0012fb48 4e 6f 74 20 49 6d 70 6c - 65 6d 65 6e 74 65 64 00 Not Implemented.
0012fb58 55 1f f8 77 18 25 f8 77 - 2f a8 fd 74 c4 01 00 00 U..w.%.w/..t....
0012fb68 05 a5 fd 74 d0 26 ce 01 - 00 00 06 01 10 04 00 00 ...t.&..........
0012fb78 00 00 00 00 00 00 00 00 - 2e fb 69 05 42 e9 69 05 ..........i.B.i.
0012fb88 c1 2f 7b 00 00 00 00 00 - 12 04 00 00 11 04 00 00 ./{.............
0012fb98 30 fb 69 05 12 04 12 00 - bb 35 7b 00 00 00 06 01 0.i......5{.....
0012fba8 11 04 00 00 00 00 00 00 - 00 00 00 00 2e fb 69 05 ..............i.
0012fbb8 35 34 7b 00 4c 34 7b 00 - 48 00 06 01 f8 fb 12 00 54{.L4{.H.......
0012fbc8 10 04 00 00 ec 53 07 05 - 11 04 00 00 08 fc 00 00 .....S..........
0012fbd8 ee c8 77 00 30 fb 69 05 - 11 04 00 00 00 00 00 00 ..w.0.i.........
0012fbe8 00 04 00 00 01 00 00 00 - ec 53 07 05 00 04 00 00 .........S......
0012fbf8 00 38 83 00 1c fc 12 00 - 23 ca 77 00 00 38 83 00 .8......#.w..8..
0012fc08 40 ff 69 05 01 00 00 00 - 00 00 00 00 2d 00 00 00 @.i.........-...
0012fc18 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0012fc28 00 00 00 00 00 00 00 00 - 00 00 00 00 01 00 00 00 ................
0012fc38 50 fc 12 00 1a 6a 73 00 - 50 fc 12 00 45 6a 73 00 P....js.P...Ejs.
0012fc48 e4 53 07 05 14 22 69 05 - 6c fc 12 00 24 67 73 00 .S..."i.l...$gs.
0012fc58 14 22 69 05 b4 fc 12 00 - 14 22 69 05 00 00 bc bd ."i......"i.....

For questions like these, you are better off contacting NI directly. Goto www.ni.com/ask for directions. It has been my experience that Dr. Watson error logs are only useful as supplementary information. It is best for support and for the forum if you can provide a clear description on how to cause the error consistently.

Dr. Watson error trying to generate report

Similar Messages

Maybe you are looking for