Drag and drop Captivate 6.0

The Drag and Drop feature on my Captivate 6.0 is no longer active. I think this is because Windows was recently reloaded onto my computer. How do I get it back?

You should indeed have drag&drop. What happens when you open an older project that had drag&drop in it?
Clearing the cache is a good practice, not sure this will help for your problem because it is the first time I read such a question. If you didn't have a lot of customisation, refreshing the Preferences could also be a possibility. There is a batch file in the utils subfolder of the installation folder of Captivate. But CP must be closed. I suppose you already tried restarting Captivate and rebooting?
Lilybiri

Similar Messages

How to add Two incorrect feedbacks in Drag and drop in captivate 7.

Hi
I want to show two different incorrect feedback in drag and drop interaction in Captivate 7. Currently we can show only one even though i have increased the drag and drop attempts to 2. I want to show a try again feedback and incorrect feedback with correct options and this should not be there when the learner re-visits this slide.
Note: I am already using a success caption and have executed the action - "On Enter" to "Hide" this success caption.
Please help me with this.

Hi Sreekanth,
You understanding is correct. But,it is not even necessary to show the correct sources on correct targets along with the feedback... the correct option numbers in incorrect feedback will do.
reg point number 3, if I revisit the slide, the feedback are still displayed. For example, in this case, I added a correct feedback, but when I revisit the slide, the feedback was still appearing. So I added this action "On Enter" to "Hide" this success caption. So that is why i told specifically that none of the feed backs should be there when i revisit the slide.
Sorry Srikanth - I am not familiar with the advanced actions or variables. I have just used some from referring the examples from net. that's all

Reg Drag and Drop Feedback in Captivate 7

Hi,
I have a drag and drop in a slide (Captivate 7) as a knowledge check.
Problem: I need a drag and drop interaction's correct feedback to reset when the learner returns to the drag and drop slide later or clicks the back button from the next slide. Currently the correct feedback is present.
Background: The learner completes the drag and drop and gets the 'Correct!' feedback from show action and 'Incorrect' feedback from the existing captivate failure feedback. The learner then continues the lesson by going to the next slide. The problem is that, if the learner returns to the drag and drop, the 'Correct!' feedback still shows even though the drag source items have reset to their original locations and the learner can redo the drag and drop interaction. Clicking the 'Reset' button does not remove the existing 'Correct!' feedback. Even if the learner redoes the interaction and does the opposite (e.g. if the learner got it wrong the first time, but then gets it correct this second time), the existing feedback does not change from 'Correct.'
Any ideas on how to fix this? I understand we have to create advanced actions. Please tell me the exact steps in this instance and whether i have to execute the actions on enter or exit.
Note: I tired to read the posts related to this. But creating the advanced options step was not given.
Thank you.

OK. Just asking because I saw one of the Adobe people chime in on a similar question a day or two back.
Unlike quiz questions, the Success and Failure Captions for drag and drop interactions appear to have Item Names which suggests they can be hidden via Advanced Actions. You should try setting an On Slide Enter action to hide them and see if that resolves your issue.

Flash Drag and Drop Template in Captivate. *HELP*

Good morning.
I am attempting to use the drag and drop learning interaction
that comes pre-packaged with Flash CS3 and import it into Captivate
for use in a Captivate based e-learning exercise.
I create the drag and drop just fine in Flash, and it looks
perfect when I publish it in Flash, etc.
When I attempt to use the EXACT same SWF in Captivate,
however, it does not work. I can move the drags around the screen,
but they will not "drop" where they are supposed to.
Thinking maybe I broke the template, I went ahead and just
imported it 100% unchanged from Flash into Captivate (without me
messing around with it changing things around) and it does the
exact same thing.
I have successfully used my own homemade flash "widgets" in
Captivate, to include like click and reveal type interactions...for
whatever reason, though, I can't get this one to work, even though
I know it works perfectly in Flash.
The .swf file was developed using ActionScript 2.0 in Flash
and I tried publishing it with Flash 9 and Flash 8 as the setting,
both do the same thing.
Help!!!?
Thanks.
Rob

Hi R
Note that the Border simply adds space to the project so the
playback controls aren't covering part of your movie. Assuming you
want that to continue AND have a playback control, you might resize
the project so the playback control is included in the main movie
as well as being placed in an area that doesn't possibly obscure
any screen activity.
Cheers... Rick

Captivate Drag and Drop Functionality

Please could someone confirm when Captivate will ship with drag and drop functionality as standard rather than as an extension only available to subscription or ASA users?
Thanks.

Adobe doesn't usually give any advance confirmation dates for when they will ship a new product version or patch.

Drag and Drop in Captivate 6

Hi,
I have a Corporate licenced version of Captivate 6. I would like to know how to use the Drag and Drop interaction.
Thanking you.
With regards
Leena

Which version of Captivate 6 do you have? Drag and drop activity is included in Captivate 6.1 onwards. For earlier versions, your best bet would be to buy Infosemantics widget here:
http://infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/which-adobe-drag-and-dra g-and-drop-widget-comparison
Sreekanth

Captivate 7 Drag and Drop is crashing Safari in iOS7, is this a know issue? Is there a fix?

This is on an iPad 3, iOS7 version 7.1.1
The Drag and Drop functions properly in Chrome, IE9, and iOS6 so I'm assuming everything is set up correctly. The scene loads, then after a second or two closes Safari.
Captivate 7
Version 7.0.1.237
Windows 7

Though I would still like an answer to this question, I do have a workaround...
Instead of setting the target objects actions to Play Audio, set the actions to execute an advanced action consisting of two statements: Play Audio and Assign CpCmdPause to 1.
JackL

Drag and Drop as an Assessment in Captivate 7

Hello-
I am having an extreme amount of difficulty when it comes to using this function in Captivate 7. The following is a list of questions that I cannot seem to find the answer to anywhere online.
After assigning the answers (as in which box gets dragged to the other), I saw that even though I have 5 separate boxes and therefore 5 separate answers, the quiz results only count this entire drag and drop as one answer. How do I set it so that each drag and drop within the slide is an individual point to add up to a total of 5 points?
I am very confused as to how to set up the failure box-I only want it to show up when people go back to review their quiz. I also have this problem with all other quizzes, as well as the "review area" box.
If someone, or multiple people, could please answer these, and not just link to another page with the answers, I would greatly appreciate it! Thank you!
Nat

Unless you need HTML5 outpu, I would suggest looking into these widgets:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/which-adobe-drag-and -drag-and-drop-widget-comparison
Free trial versions for download here if you want to test:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

Drag and drop in captivate 7

In captivate 7, there is a drag & drop interaction, is it in-built or i want to purchase the drag and drop widget.

Hello,
It is built in since 6.1, and works for SWF and HTML5 output, has not totally the same functionality of the interactive drag and drop widget (but that one only works for SWF-output).
Lilybiri

Cannot change target sound in drag and drop to "no sound" once a default sound is selected in Captivate 8

I was trying out all the options for a drag and drop interaction in Captivate 8 and selected one of the default sounds for a target. I want to change it back to "no sound", but the selection never sticks. Is there something I'm missing or is this a "feature"?

When you go to the “Format” tab of the drag and drop properties, there is an option called “audio” (right below the “depth” option).
It has default sounds you can pick (sound1, sound2, sound3, and incorrect sound). Or you can browse to an audio file. If I select one of the default sounds, and then decide not to use any sound, it will not change to the “none” option. I have to delete the drag and drop interaction and start over.
Robert Willis | 616.935.1155 | [email protected]
Measurement always affects performance.
The right measurement always improves results .
Find out how. Download our Return On People eBook.<http://bit.ly/151jD9C>
This message is for the addressee only and may contain confidential and/or privileged information. You may not use, copy, disclose, or take any action based on this message if you are not the addressee. If you have received this message in error, please contact the sender and delete the message from your system.

Drag and drop objects in Captivate 4

Hi,
Is it possible to have a user click and drag an object on a slide in captivate 4?
For e.g. - in a matching type-quiz, instead of creating the usual quiz - I want a user to click and place the correct object in the correct box. Can this effect be achieved?
Thanks!

With either (or both) of these Drag and Drop widgets, yes: http://www.infosemantics.com.au/dragdrop

How do I create a drag and drop interaction using Captivate 8?

I cannot figure out how to create a drag and drop interaction in Captivate 8. Options to do this are greyed-out.

You can only use D&D in normal projects, not in responsive projects.
http://helpx.adobe.com/captivate/kb/top-issues-captivate-8.html

Adobe Captivate Help | Drag-and-drop interaction (for subscription and Adobe Software Assurance customers only)

This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/drag-and-drop-interaction.html

Yep. But it will only likely get to you in the next version released for NON subscription or ASA customers. With 6.1 Adobe was giving a preview of the functionality they would be including in your next release. Either way, whether you upgraded to the subscription edition or waited for the next paid upgrade, you were always going to be paying something to get this new functionality. 6.1 users just got it earlier than everyone else. That was Adobe's decision. It certainly hasn't been a popular one.

Captivate 8 drag and drop interaction

Hello,
just having a look at the new captivate 8 and when i try and make a drag and drop question i go to the normal place of window> drag and drop. but the problem is the drag and drop option is grayed out - could this be because i am only running it on a trial copy?

Hi, I'm evaluating Captivate 8 and had the same question as SuzySu.
If my client wants a drag and drop activity, would I need to create a non-responsive project and because being able to view on mobile is also required, would I need to create a separate responsive project without drag and drop? If so, when publishing the projects, would the proper project be automatically selected based on their viewing platform?
Also, is there a list off all interactions that will or will not work with a responsive theme?
Thank you!

Captivate 8 drag and drop interaction not working

Hi, I am working with Captivate 8 and created a drag and drop interaction using the drag and drop wizard. For some reason when I preview the interaction some of my drag sources work and others do not. I have searched high and low for what I may be doing wrong but I can't figure it out. I created types when making the interaction so it doesn't make sense that some should work and others do not. Thank you for any help you can provide.

Ok, so I inserted the screen shots below. I realize the items are overlapping in the wiring. I did change that and try it but it still didn't work. Maybe I need to completely rebuild it? I created types so that 9 would go to one target and 6 to the other.Thank you so much for your quick help on all of this.

Drag and drop Captivate 6.0

Similar Messages

Maybe you are looking for