Dreamwaver CS3 doesn't start on 64 bit machine

I have just bought a new desktop, Acer M7300, and upgraded it to Windows 7 Home Premium 64 bit. (I also exprerienced the same prome with Vista Home Premium).
When I start Dreamweaver nothing appears to happen. When I checked in task manager there is a process that has grabbed ~40m of memory.
I have tried uninstall/reinstall with a fresh download. I have also removed all remaining files after the uninstall.
I have tried running it Administartor and various versions of XP compatibility
I have run the Acer updates recommended in the FAQ's.
It hasn't got to the point where it installs the personal .dat files so no need to look for corruptions there.

Its now working but asked for a licence which I didn't have so I'm running a 30 day trial for now.
I did a factory reset back and Vista install. I followed this with Windows 7 upgrade but when it got to the choice of installation I did a clean install rather than an upgrade. I then installed other apps, MS Office 2007, Photoshop elements and a few other ones. I checked that all the correct drivers were in place, set up all my file sharing and network settings for my 2 laptops and finally ran DW CS3 install.
I don't know which of the above solved the problem, but at least I can now get on with some work.
Thanks for you support,
Simon

Similar Messages

CS3 doesn't start again after deinstallation

CS3 suddenly didn't start any more. So I deinstalled CS3 and tried to reinstall the programm, but it doesn't work .ö...
The message is "Adobe Photoshop wird initialisiert" and after this nothing happens.
Is there anybody, who can help me???

I would uninstall, run the Adobe Script Cleaner and install in default locations.

Windows 7 64-bit 8GB RAM doesn't start after installing X-Fi drivers

I have Windows 7 64 bit, 8GB RAM for a few months. After inserting an X-Fi Platinum Fatalty Champion Series (S/N MASB046A83R0772D; OP BN 06SB046A00005 Rev A) and installing Creative Sound Blaster X-Fi series driver 2.8.003 dated 26 Jun 09. The sounds plays OK, but after rebooting Windows doesn't start, with a CorruptRegistry error. I have installed Windows from scratch, but it only works until I install the X-Fi driver and reboot. Please help. I have searched the internet and found no solution to my problem besides a Wikipedia article that X-Fi has problem with 64-bit Vista with 4GB RAM or more.

Hi, I am also running windows 7 ultimate 64 with the same sound card and am using the july 5 driver. It works but i cant use the creative control panel as i get a black screen on start-up and when i uninstall the contol panel windows functions normally. I may have to go with the onboard sound to get all 4 speakers to work. I have 6 Gb of ram on a gigabyte X58 Mobo.

ITunes on 64 bit doesn't start, recognised as 32 bit program

Hi,
I use windwows 7 Professional 64 bit,
when I run itunes installer everything goes fine (except that it installs in x86 folder!) but when I try to run itunes it just doesn't start, nothing shows up and in task manager i see "itunes.exe*32" which means it is recognised as a 32bit program!!!
how can I solve this?
I also tried with itunes 8 and 9 but nothing worked

no error messages at all. ... quick time works
many thanks ... that's got one possibility with an error-message-free iTunes launch failure ruled out already.
Checking on another possibility that has been common in recent times, now.
Try (by way of experiment) disabling the BonJour Service.
In your Start Menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Maximise the window to better see what's going on.)
Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
Restart the PC, and try launching iTunes again. Does it launch this time?
If iTunes launches with the BonJour Service disabled, by any chance do you have a recent version of IOBit's Advanced SystemCare utility currently installed on the PC? If so, try uninstalling and reinstalling Advanced SystemCare. Can you launch iTunes without having to disable the BonJour Service now?

Illustrator CS3 or 4 doesn't start up anymore

I have worked successful with CS4 but last week Illustrator won't start up any more.
When I start Illustrator there is nothing happens because it wont start up and yes, after that, my pc is hanging up (you must start up with force.
The second program from CS4 Photoshop is working good.
I have re-install CS4 but same problem (Illustrator don't startup and after that pc does nothing, photoshop is working good.
Tried CS3 to watch if Illustrator is working but same problem.
I have delete from registry, I have try WinCS3clean, cs4clean, etc. but it won't; Illustrator doesn't start up any more.
What can it be?

You're likely to get a lot more help in the Illustrator forum.
Bob

Financial Reporting Studio client doesn't start in Windows 7 64-bit

I have installed version (11.1.2.756) on my Windows 7 64 bit machine. When I try to start the application it will not start. I am getting the following message. Runtime Error 429 ActiveX component can not create object.
Thanks

Is the windows user/id is having sufficient administrative rights? Have you tried with Administrator id for windows login & then tried to open FR Studio?
If that does not help, try reinstalling FR Studio.
Regards,
Santy

Xorg doesn't start on Macbook Pro 4,1

I've just installed Arch on my Macbook Pro 4,1 (Early 2008).
The machine has this graphics card:
VGA compatible controller: NVIDIA Corporation G84M [GeForce 8600 GT] (rev a1)
I've installed "nvidia" package driver, launched "nvidia-xconfig" but when I try to launch:
X -config /etc/X11/xorg.conf
Xorg gives me some errors and doesn't starts X.
http://i.imgur.com/AtzHf77l.jpg
Ideas?
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Yeah it is quite a mess... but thats what you get when you try to use hardware that picks and chooses the bits of the UEFI standard it wants to include.
So like most UEFI systems, Mac(book)s are able to boot their own system with it's EFI setup. It *can* also be used to boot other systems, but setting it up is unique to Macs. So for the purpose of "bootcamp", Apple introduced a bios compatibility mode. When it was introduced, there was no real windows UEFI prevalence (existence?) at that point. So that is how they made this possible.
But the compatibility mode is not turned on by default. OSX uses GPT (according to the standard and everything in this case), but when it makes a "bootcamp" partition it adds to the GPT a MBR partition table (ms-dos) with partitions. According to the GPT spec, there is the actual GPT partition table, but there is also the inclusion of a MBR with a single partition spanning the whole disk. This is to protect the disk from being overwritten by non-GPT aware tools (like fdisk was until recently). So a hybrid MBR simply adds partitions to the ms-dos partition table that (hoepfully) line up with at lease the first few partitions of the GPT. When this is present, the machine will enable the bios compatibility mode.
Booting the Mac with EFI will have no bearing on the Arch Linux installation that is installed in bios compatibility mode. It will use its own bootloader and everything. So there should be no issue. It is probably good to use something like rEFInd in order to give yourself a nice interface with which to select between the two though. The other boot loaders and/or boot managers don't have the ability to recognize both EFI and bios bootloaders.

My MacBook Pro 15,4" doesn't start at all!

Hi everyone!
Today morning, normal day, after having my MacBook Pro charging all night (as always), I took it (without any cables) in the kitchen, in order to, very surprising, turn it on!
But nothing happens!! Checking battery status: ok (new), removing it and trying without, still nothing. I tried all reset techniques, as well as Ctrl + Cmd + Start button. But still nothing.
What is happening?
When I press the button, I hear the DVD player making his little "clac-clac", the fan is starting, and the light as well, but as soon as I take my finger off the start button, it stops again! If I keep my finger longer on the button, it stops as well after a while (normal forced stop), but the "gong" never sound.
Can anyone help me with this? Where does it come from? I'm a computer technician, and fixed a lot of laptops, but when it comes to Apple, I panic, and I don't know what to do anymore! I'm always a bit scared to open it myself...
Maybe I should add that it's making some noise on the right fan since 2 months (as if a plastic piece was blocked inside), some kind of "clac, clac, clac", and it was getting really warm sometimes. The DVD-player is also a bit "curved", and it's problematic to extract the discs sometimes.
Thanks in advance for your help!
Cheers,
Ron.

Hi everyone!
Thanks for the answers.
@Advanced User: I haven't tried that yet, but I will tonight. And I found a Store in my town, in case I cant solve it myself.
@eww: I always buy original parts, even more by Apple. Of yourse I tried without the battery. All the basic tests were done. I also opened the machine and test electrically if anything was interupted. But I couldn't find anything. I must say my son (2 years old) found it very funny last week-end to play piano (pretty strongly) on the keyboard of the MB... But I don't think he broke something, otherwise I'd be really disappointed in a 2000€ notebook...
The exact model of the MacBook is MB133D/A, and I cant access any System Profiler, because the MacBook.... doesn't start! The battery was still holding 3 hours.
<Edited by Host>

VMWare doesn't start after kernel update

Hello,
I've just updated my kernel to 3.10.0-997-generic. After that VMWare Player doesn't start anymore.
I've tried to run patches and different solutions I found in google, but it didn't worked yet.
This is the log of my last attempt.
Thanks in advance
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Log for VMware Workstation pid=14806 version=9.0.2 build=build-1031769 option=Release
2013-06-14T21:42:29.306-03:00| vthread-3| I120: The process is 64-bit.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Host is Linux 3.10.0-997-generic Ubuntu 12.10
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: Msg_Reset:
2013-06-14T21:42:29.306-03:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory.
2013-06-14T21:42:29.306-03:00| vthread-3| I120: ----------------------------------------
2013-06-14T21:42:29.306-03:00| vthread-3| I120: PREF Failed to load user preferences.
2013-06-14T21:42:29.306-03:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-14806.log
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmmon module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmnet module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmblock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vmci module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Reading in info for the vsock module.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Setting vsock to depend on vmci.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Created new pathsHash.
2013-06-14T21:42:29.318-03:00| vthread-3| I120: Invoking modinfo on "vmmon".
2013-06-14T21:42:29.320-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.320-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.322-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.322-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.324-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.324-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.326-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.326-03:00| vthread-3| I120: Invoking modinfo on "vsock".
2013-06-14T21:42:29.328-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 0.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Obtaining info using the running kernel.
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Setting header path for 3.10.0-997-generic to "/lib/modules/3.10.0-997-generic/build/include".
2013-06-14T21:42:29.345-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.351-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Update kernel header path to /lib/modules/3.10.0-997-generic/build/include
2013-06-14T21:42:29.517-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.523-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.524-03:00| vthread-3| I120: Found compiler at "/usr/bin/gcc"
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.526-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.526-03:00| vthread-3| I120: Using user supplied compiler "/usr/bin/gcc".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: Got gcc version "4.7".
2013-06-14T21:42:29.528-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Trying to find a suitable PBM set for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: No matching PBM set was found for kernel "3.10.0-997-generic".
2013-06-14T21:42:29.532-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.538-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.538-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.539-03:00| vthread-3| I120: Validating path "/lib/modules/3.10.0-997-generic/build/include" for kernel release "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Preprocessed UTS_RELEASE, got value "3.10.0-997-generic".
2013-06-14T21:42:29.545-03:00| vthread-3| I120: The header path "/lib/modules/3.10.0-997-generic/build/include" for the kernel "3.10.0-997-generic" is valid. Whoohoo!
2013-06-14T21:42:29.545-03:00| vthread-3| I120: GCC minor version 4 does not match Kernel GCC minor version 4. But that is ok.
2013-06-14T21:42:29.545-03:00| vthread-3| I120: Using temp dir "/tmp".
2013-06-14T21:42:29.547-03:00| vthread-3| I120: Invoking modinfo on "vmnet".
2013-06-14T21:42:29.548-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.548-03:00| vthread-3| I120: Invoking modinfo on "vmblock".
2013-06-14T21:42:29.550-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:29.550-03:00| vthread-3| I120: Invoking modinfo on "vmci".
2013-06-14T21:42:29.552-03:00| vthread-3| I120: "/sbin/modinfo" exited with status 256.
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Setting destination path for vmnet to "/lib/modules/3.10.0-997-generic/misc/vmnet.ko".
2013-06-14T21:42:30.327-03:00| vthread-3| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Successfully extracted the vmnet source.
2013-06-14T21:42:30.332-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmnet-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:31.977-03:00| vthread-3| W110: Failed to build vmnet. Failed to execute the build command.
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Setting destination path for vmblock to "/lib/modules/3.10.0-997-generic/misc/vmblock.ko".
2013-06-14T21:42:31.979-03:00| vthread-3| I120: Extracting the vmblock source from "/usr/lib/vmware/modules/source/vmblock.tar".
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Successfully extracted the vmblock source.
2013-06-14T21:42:31.990-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmblock-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:33.429-03:00| vthread-3| W110: Failed to build vmblock. Failed to execute the build command.
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Setting destination path for vmci to "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:33.431-03:00| vthread-3| I120: Extracting the vmci source from "/usr/lib/vmware/modules/source/vmci.tar".
2013-06-14T21:42:33.445-03:00| vthread-3| I120: Successfully extracted the vmci source.
2013-06-14T21:42:33.446-03:00| vthread-3| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-YkpUyf/vmci-only auto-build HEADER_DIR=/lib/modules/3.10.0-997-generic/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Successfully built vmci. Module is currently at "/tmp/modconfig-YkpUyf/vmci.o".
2013-06-14T21:42:35.773-03:00| vthread-3| I120: Found the vmci symvers file at "/tmp/modconfig-YkpUyf/vmci-only/Module.symvers".
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Installing vmci from /tmp/modconfig-YkpUyf/vmci.o to /lib/modules/3.10.0-997-generic/misc/vmci.ko.
2013-06-14T21:42:35.774-03:00| vthread-3| I120: Registering file "/lib/modules/3.10.0-997-generic/misc/vmci.ko".
2013-06-14T21:42:36.234-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2013-06-14T21:42:36.234-03:00| vthread-3| I120: Registering file "/usr/lib/vmware/symvers/vmci-3.10.0-997-generic".
2013-06-14T21:42:36.686-03:00| vthread-3| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.

Before
create file "/usr/lib/vmware/settings"
after
create file "/root/.vmware/config"
after
create file "/root/.vmware/preferences"
And after
Install the build-essential package:
sudo apt-get install build-essential
VMware Workstation 11.1.0 and Player (Pro) 7.1.0 support kernels up to 3.18. You can apply a patch:
curl http://pastie.org/pastes/9934018/download -o /tmp/vmnet-3.19.patch
cd /usr/lib/vmware/modules/source
tar -xf vmnet.tar
patch -p0 -i /tmp/vmnet-3.19.patch
tar -cf vmnet.tar vmnet-only
rm -r *-only
vmware-modconfig --console --install-all
I tried, worked

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Ae doesn't start anymore on OS X 10.9 (Ae Vers 12.2.1) HELP!

I cant see any Error Massage or number and i can't make a crash report. Whats happend? Just the following massage i see. It's german and means that After Effects can not continue cause it's a unexpected error at the start up of this application
german massage
"After Effects kann nicht fortgesetzt werden: Unerwarteter Fehler beim Starten der Anwendung"
I reinstalled but nothing is change and i restarted also but nothing
What should i do?

thanks a lot for your service and the fast answer but i try and it was the same like before. Here my info's... Hope that will be helpful. It's an hackintosh computer but I'd always worked with Ae on this comp. I never had any problems like this and it still came's only after the12.2 update i think. not sure.... I'm cc member since a whyle and i have the student abo.
Model Name: Mac Pro
Model Type: Early 2008
Model Identifier: MacPro3,1
Board Identifier: Mac-F42C88C8
Processor Name: Intel Core i7 CPU 920
Processor Model: Harpertown
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 4
Memory Size: 24 GB 1280 MHz DDR3
Graphics Model: AMD Radeon HD 6xxx 1024 MB
Assembled in: United States
Manufactured during: June 2008
L1 Cache: 64 KB
L2 Cache: 256 KB (per Core)
L3 Cache: 8 MB
Processor Bitrate: 64 bit
EFI Bitrate: 64 bit
Kernel Bitrate: 64 bit
Processor Interconnect Speed: 5.8 GT/s
Boot ROM Version: MultiBeast.tonymacx86.com
System SMC Version: 1.30f3
Power Source: AC Power.
Hardware Universal Unique Identifier: 7F47AAF4-E8DB-5916-B95C-70DD3AE58CAC
Minimum Supported Operating System: OS X 10.5.1 Build 9B2117 (Leopard)
Current Boot Operating System: OS X 10.9.2 Build 13C1021 (Mavericks)
Maximum Supported Operating System: Latest version of OS X 10.9 (Mavericks)
So i found some other problems and mybe thats the same source... Cinema 4D Lite doesn't start also. On the MAXON website i found that exist some troubles with ATI graphic chips under Mac OS X

DNS/DHCP Management Console doesn't start

Folks,
I am running the DNS/DHCP Management Console in an old Windows XP Pro SP2 computer, and it works fine. But when I install it in my XP Pro SP3 computer it refuses to start. It stucks at the welcome screen with the globe animation and doesn't go any further. And there is also no apparent program or process to kill in the Task Manager, and the CPU util is zero. I have to log out and back in again to get rid of the welcome screen.
I am wondering if it may have something to do with the Java Runtime Environment (JRE)? I am using the latest version in my SP3 machine, where it doesn't work, and a much older version in my SP2 machine, where it works. I have not upgraded Java in that machine because I am afraid that the Management Console might stop working... If Java is the source of the problem, is it impossible to get it to work with a newer Java?
PJ

I wrote a TID on this, but it hasn't shown up yet. It is TID 7016049
As I am still waiting for it to show up on the public site, I will populate the resolution portion of the TID here. Hope it helps:
Despite uninstalling all older versions of Java, a remnant of the old install still exists. The offending file is javaw.exe, but there may also be a java.exe in the same location.
In the C:\Windows\SysWOW64 directory there may be a javaw.exe and java.exe from a previous installation. Check the properties > details tab of the file to confirm the version. If this javaw.exe is found first then Windows is directed to look in the wrong location in the registry for the Java Runtime Environment key. Once removed the javaw.exe from C:\Program Files\Java\JRE1.8.0_25\bin directory is found, which sends Windows down the correct path to find the necessary key in the registry.
Once the older version of javaw.exe is removed, the JMC should load.
The SysWOW64 directory is for 64-bit machines. If this error is being encountered on a 32 bit machine, then the superfluous javaw.exe must be found and removed. Process Monitor for Windows can be downloaded and utilized to track down the superfluous javaw.exe. As the java.exe is also superfluous, we recommend removing it to (or copy it out to a backup directory until testing is complete).

PS CS 6 doesn't start anymore.

When I start PS CS6 I get a message to login with my Adobe-ID to test the CS6 Extended software. When I close this window CS 6 doesn't start.
But I bought a PS CS6 software two years ago and worked with this software without problems.
I upgraded from Windows 8.0 to Windows 8.1 (both 64 bit). Is this the reason?
Can you help me pls?
Best regards
Holger

You can't. You can only reinstall the OS if the app is actually corrupt. However, have you tried to see if Safari starts in another user account on your machine? Make a test account here
 > System Preferences...Users & Groups
by clicking on the + sign in the bottom left corner. Fill out the details and click 'create'.
Once you've made the new account, log out of your current account and into the new one.
Does Safari open in that account?

MDM Server doesn't start after upgrade to SP 5

hi,
i'm not used to sap services on windows hosts.
After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
SAP-R/3-Startup Program
Starting at 2010/08/16 21:29:18
Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
Starting Programs
(1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
(976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
(3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
(2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
(3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3652 died unexpectedly, restarting process
(3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3612 died unexpectedly, restarting process
(2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 2364 died unexpectedly, restarting process
(3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3576 died unexpectedly, restarting process
(3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3588 died unexpectedly, final process restart.
Process will not be restated in the future because of frequent failure.
(1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
With 7.1.04 the server was running well.
I happy for any suggestions

Hi,
Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
hope it helps you.
Best regards,
sudhanshu

MacBook Pro, randomly Windows 7 doesn't start and screen goes blank

Hi, I installed Windows 7 (Ultimate 64-bit) using the BootCamp on my MacBook Pro (MBP) i7, mid 2010. Installation was successful without any issues. This is my first Mac and, for now, I primarily use Windows on my MBP. The problem: After selecting Windows OS, randomly, Windows doesn't start and the screen goes blank. When this happens, most of the time I have to press the power button twice and press the Option key again to restart in Windows. Sometimes I have to hold down power button for several seconds to turn off MBP, then power it back on to start over. Windows 7 seems to restart on second try every time.
I can tell when the screen will go blank and Windows will not start, when the blinking cursor does not appear on upper left corner of the screen. Also, I enabled Windows OS Boot Log and nothing displays when this happens.
I took in my MBP, twice, to local Apple store Genius Bar and I was told that it was a Windows problem and I must purchase AppleCare Protection Plan to get help resolving the blank screen. It was explained to me that AppleCare had Windows experts who can help with resolving the issue. Therefore I purchased the AppleCare Protection Plan and spoke to AppleCare directly and still no resolution.
Any help you can provide would be greatly appreciated. Thanks in advance.

There is a forum specifically for Boot Camp, this is a general MBP forum and most of us don't use Boot Camp or Windows. The link to that forum is:
http://discussions.apple.com/category.jspa?categoryID=237
Apple does support Boot Camp however if your problem is with Windows Apple does not support a Microsoft product. You would need to contact Microsoft for help.
Roger

Dreamwaver CS3 doesn't start on 64 bit machine

Similar Messages

Maybe you are looking for