Dreamweaver and Flash

Hope this is the right place to post since dreamweaver
supports flash and adds its own code....
I have an html page with a flash movie embeded in it. This
site is older so it is sitting in a table. Then I have another
flash movie that is floating in a div above the page with
wmode="transparent" for some reason no matter what I do including
floating both movies and messing with the z-index the
wmode="transparent" movie always falls below. How do I make this
movie sit above everything??? Any help would be much appreciated..
I cannot find a blurb matching my situation anywhere.

Hi Cary,
here is the link...
http://www.maverickllc.com/index_dna_xyz.html
...now there is a delay on this fairy man swf ..about 15-secs...
the fairy man is always behind the other flash no matter what I do
it seems. the other one is embeded (the pic of the man with the
tiger). Im trying to get the man-fairy above the man-tiger flash
movie.

Similar Messages

  • Problem with dreamweaver and Flash

    Hi, maybe someone can help me, i have any problem with
    dreamweaver and flash, i have a page and i have a menu and
    sub-menu, and the same page i have a category en flash 550 x 700 (
    photography and more... ) but when the menu to unfold
    the menu to see under flash and it cant see ( sorry my
    english is bad.... i hope you can understand me, and help me.. )
    i dont now why always flash ever stay up, or first, and
    another information under flash... this a problem... if you have
    menus...
    thanks.... have nice day.....

    This is a drawback of using flash or any other active
    content. By default, all active content including flash will
    display over every other content and thats why your menu stays
    under the flash movie. Some people make the flash background
    transparent to show content under the flash movie, but that will
    not work for menu items.
    I would suggest that you make the menu such that it does not
    overlap with the flash movie.

  • I installed CS3 Design premium upgrade yesterday onto my new mac OS X Yosemite 10.10.1. You gave me a new serial no (Case 0186381031). I have been able to open Photoshop, Bridge, Dreamweaver and Flash. The Illustrator, Indesign and Acrobat applications ar

    I installed CS3 Design premium upgrade yesterday onto my new mac OS X Yosemite 10.10.1. You gave me a new serial number. I have been able to open Photoshop, Bridge, Dreamweaver and Flash. The Illustrator, Indesign and Acrobat applications are not in my applications folder although there are folders in there with those names containing associated items. How can this have happened and what can I do?

    Janetc72338130 what happens if you try to reinstall Illustrator CS3, InDesign CS3, and Acrobat?  What version of Acrobat are you installing?

  • Hello, my 1st time here..after updates my mac yosemite my illustrator can't open. It ask me to install "legacy Java SE 6 runtime" it also affecting my dreamweaver and flash rest are fine. Im bought adobe creative suite 6 DWP. thanks

    hello, my 1st time here..after updates my mac yosemite my illustrator can't open. It ask me to install "legacy Java SE 6 runtime" it also affecting my dreamweaver and flash rest are fine. Im bought adobe creative suite 6 DWP. thanks

    rezala,
    You should be able to get round the issue altogether without the legacy version (and its security implications), by following this:
    http://oliverdowling.com.au/2014/03/28/java-se-8-on-mac-os-x/
    It is even more thoroughly described in this thread, see post #3 on by gator soup:
    https://forums.adobe.com/thread/1706469

  • How to activate Studio 8 won't accept serial number of my previous versions of Dreamweaver and Flash Pro

    In order to complete Studio 8 activation, I was asked to provide serial numbers of older version of Dreamweaver and Flash Pro. I did but it won't accept it.
    Kindly help to resolve this issue

    Jeff A Wright wrote:
    I know that both Dreamweaver MX 2004 and Flash MX 2004 are two versions later than version 8.0.
    Other way round, Jeff - MX 2004 is one version earlier.
    MX 2004 (version 7) pre-dated Studio 8 (version 8) by two years.
    Adobe Creative Suite - Wikipedia, the free encyclopedia
    Macromedia Studio MX 2004 Released September 10, 2003, despite its name, it is internally version 7.
    Macromedia Studio 8 Released September 13, 2005, Studio 8 was the last version of Macromedia Studio.
    I have always found it odd that MX 2004 owners have been provided with non-activation serial numbers by Adobe.
    However, Studio 8 owners (later version software) have been left stranded with no non-activation serials and no way to activate their software when they re-install. What do they do?

  • If I set Firefox as my default web browser, the help links on Adobe Dreamweaver and Flash's welcome screens don't connect to the help pages on Adobe's site. It just links to Firefox's start page and stops. The links work properly if Safari is set to the d

    If I set Firefox as my default web browser, the help links on Adobe Dreamweaver and Flash's welcome screens don't connect to the help pages on Adobe's site. It just links to Firefox's start page and stops. The links work properly if Safari is set to the default browser. Please help.
    == URL of affected sites ==
    http://www.adobe.com

    Hello,
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Creating SCORM/AICC compliant content in Adobe Dreamweaver and Flash CS4

    Could anyone please advise if Dreamweaver and Flash CS4 is suitable for creating e learning SCORM/AICC compliant content?
    Many Thanks.

    I thought Captivate was only flash based projects. I am currently installing the trial version of the suite to investigate.
    I have read the features section of the suite and it states that Dreamweaver CS5 comes bundled with 'Domain specific html templates' that are 'instructionally sound' html templates for elearning course development. Are these not SCORM compliant?
    I am really just creating a very simple online course that contains no interactive activities or assessments and is very heavily text based with several supplied flash videos. Advice on what would be best to produce this in would be appreciated.
    Please note I have very little understanding of SCORM compliancy etc at this stage.
    Many Thanks.

  • Uninstall Dreamweaver and Flash MX 2004

    Hi,
    I'm having problems finding information in product support
    regarding how to uninstall Dreamweaver and Flash MX 2004 from Mac
    OS X.
    Could anyone help by directing me to on-line help, or other
    step-by-step instructions. I would really like to get all
    files/extensions/etc off my computer (because I'm a neat freak) and
    don't like having misc. files lingering around.
    Much Appreciated,
    Don

    Put the files in the Trash. To find orphans do a spotlight
    search for DW MX2004, etc and trash these.
    If in doubt, don't Trash the files, but zip them so they are
    not accessible to your system. Ditto on all the orphans in the
    /Library/..... and /User/Library/.....
    Once you are sure that you really no longer want MX 2004,
    then you can trash the zipped files.

  • Just upgraded machine, Dreamweaver and Flash not working

    I've been using Dreamweaver MX and Flash MX on my old Power Mac G5 for the last 5 years and just upgraded to a new Mac Pro Quad Core Intel Xeon processor. It is a 64 bit system using Mac OS10.6.4.
    They do not run on this new machine. Is there any way to get them to run on it?
    If not, do I have to pay full price for new software or is there an upgrade available?
    Thanks,
    Glenn Nevill

    If you want the new version you would have to pay the full price.  The Adobe policy is upgrade once every 3 versions.  MX was version 6, CS5 is version 11.  I would recommend purchasing the new suite if you can.  Otherwise, if it ran under Leopard, you may (I am not positive) be able to run Parallels with 10.5 and run MX in a virtual environment.

  • Uninstalling Dreamweaver and Flash MX 2004!

    hello guys!
    i want to insntall studio 8 but before i do that i want to
    remove studio mx 2004 (flash, dreamweaver and extension manager)
    for Mac OSX, but there are NO information on this site! and i tried
    googling but found nothing!
    i could just trash the apps and the pref files, but there are
    many other files that are stored in my computer, plus there is a
    extensions manager that i don't know how do remove..
    i remember there was a link on the old macromedia support
    page on this subject but now all they have is information on
    removing studio 8! thats discrimination against old versions!
    please help me!
    thanks!

    > i want to insntall studio 8 but before i do that i want
    to remove studio
    > mx
    > 2004 (flash, dreamweaver and extension manager) for Mac
    OSX,
    I would install Studio 8 first. It'll install into its own
    separate folder
    and won't affect MX 2004.
    Ensure that your preferences, extensions and site definitions
    get migrated
    correctly and that everything's running in 8 as expected.
    Then think about uninstalling MX 2004.
    Regards
    John Waller

  • Scrub question for dreamweaver and flash

    It has been forever since I have used Dreamweaver. I pretty much stick to print design with the exception of my own stuff, and my last few sites have all been done 100% in Flash. So I am in the process of putting together my new site in dreamweaver and have gone through a few hours worth of tutorials so think I am well on my way to getting something up.
    My plan is to have a flash header that I am hoping can stay the same throughout the site. In other words, I dont want it to reload each time it goes to a new page, just keep playing. Is there a way for me to easily accomplish this? I am assuming this would be on the DW side, but if need be I can post on the Flash forums.
    Now the one other thing, if its something that can be done but is a total nightmare to deal, or just too far out of my league since I havent used DW any time recently just let me know and I will come up with a new plan.
    Thanks in advance!

    Thanks for the feedback. I knew going into those last sites what limitations flash brings to the table. Beleive it or not those two didn't really play into my thought process at all. I get very little traffic, most of it from people actually typing in the web address or linking to it from after I email it to them. It does on the other hand let me do some really creative stuff like a drag and drop resume that was modeled after a pantone book. Anyways, the big thing thing that is pushing me to go the the other direction at this point is mobile devices. Just driving me up the wall that I cant see my site on my iphone.
    As far as the current project goes, thanks again. I think I will just skip the flash at this point, and I have already been thinking about a back up plan. No point in trying to figure out how to do something that is already dated.
    Now for question two. I have a client that I do print work for that has a similar issue. He has a "music player" on his site that has a similar problem. Any time someone changes pages the song stops, and when the new page loads so does a new song. No idea what sort of technology/ program/ addons were used for this, but it drives me nuts anytime I go to his site. Would it be a similar process for the music player to conitinue pllaying? Meaning the frames? Would just like to be able to point him in the right direction so he can tell his web guy.
    Thanks!

  • Dreamweaver and Flash site problems

    I have completed my website. It's built in Dreamweaver CS3
    with Flash CS3 movies in the Dreamweaver html files. I created it
    on a MAC. I have no problem seeing everything on a MAC, but PC
    users cannot get around the site. Some buttons won't work. Loads
    slowly. Help!

    It is built in both Flash and Dreamweaver version CS3 on MAC
    using Action Script 2. Here's the problem. In four of the Flash
    files we created buttons using the getURL coding to send the viewer
    to a new page which is in the root directory on the ftp site with
    rest of the site. This buttons do not work on PC's. The other of
    the buttons in the site were created in dreamweaver which are
    working fine for both Mac and PC. When we load the entire site up
    to our FTP site, anyone working on a MAC is able to go through the
    site from page to page, and the buttons built in Flash work fine.
    However, folks working on PCs cannot get the buttons built in the
    Flash pages to work.
    If you go to barnesandliston.com, click on photography at the
    bottom of the home game and then click on sports or nature or
    picture story you'll see that those links don't work (if you are on
    a PC). Those are the buttons created in Flash that only work on a
    Mac. Code follows:
    nature_btn.onPress = function() {
    getURL("
    http://www.barnesandliston.com/nature",
    "_self");
    };

  • Question--Dreamweaver and FLASH Video

    I have looked at tons of forums now and still see no solution for the problem many of us are having. I've loaded a flash video using dreamweaver cs4 and it won't show up. I've gotten the white box syndrome too. I sure wish someone could figure it out...I've consulted three "experts" including someone on the phone at adobe. My flash file is very big...193 MB, but can't it be done?
    Thanks to anyone who can help!
    Here's the code:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>SwimAmerica Coach Training</title>
    <script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
    </head>
    <body>
    <p>SwimAmerica Coach Training</p>
    <p>
      <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="640" height="480" id="FLVPlayer">
        <param name="movie" value="FLVPlayer_Progressive.swf" />
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="scale" value="noscale" />
        <param name="salign" value="lt" />
        <param name="FlashVars" value="&amp;MM_ComponentVersion=1&amp;skinName=Clear_Skin_1&amp;streamName=../programdire ctorsitesupervisor/Video/SAVideo&amp;autoPlay=true&amp;autoRewind=true" />
        <param name="swfversion" value="8,0,0,0" />
        <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
        <param name="expressinstall" value="Scripts/expressInstall.swf" />
        <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
        <!--[if !IE]>-->
        <object type="application/x-shockwave-flash" data="FLVPlayer_Progressive.swf" width="640" height="480">
          <!--<![endif]-->
          <param name="quality" value="high" />
          <param name="wmode" value="opaque" />
          <param name="scale" value="noscale" />
          <param name="salign" value="lt" />
          <param name="FlashVars" value="&amp;MM_ComponentVersion=1&amp;skinName=Clear_Skin_1&amp;streamName=../programdire ctorsitesupervisor/Video/SAVideo&amp;autoPlay=true&amp;autoRewind=true" />
          <param name="swfversion" value="8,0,0,0" />
          <param name="expressinstall" value="Scripts/expressInstall.swf" />
          <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
          <div>
            <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
            <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p>
          </div>
          <!--[if !IE]>-->
        </object>
        <!--<![endif]-->
      </object>
    </p>
    <script type="text/javascript">
    <!--
    swfobject.registerObject("FLVPlayer");
    //-->
    </script>
    </body>
    </html>

    Z,
    www.swimamerica.org/programdirectorsitesupervisor/Video/SAVideo.flv
    www.swimamerica.org/programdirectorsitesupervisor/VideoSAVideopage.html
    www.swimamerica.org/programdirectorsitesupervisor/VideoSAVideopage.asp
    Thanks...

  • Dreamweaver and Flash Builder for PHP

    I have created a php database in Dreamweaver, can this database be imported or converted to Flash Builder for PHP?

    MySQL has nothing to do with Dreamweaver or any other development software. It's a DBMS (which stands for DataBase Management System). More simply, it's a way to store data. Other DBMS are PostgreSQL, Oracle, and so on..., as mentionned above.
    To use your existing MySQL database with FlashBuilder for PHP, simply specify where you store your PHP services on your computer when you create your project. Then FB will attempt to connect to MySQL with the help of your PHP code.
    And you'll be able to retrieve your data in the brand new Spark Datagrids !
    Hope it'll help.
    Julien.

  • Dreamweaver and flash combined?

    hey everyone, i'm new at both dreamweaver/flash and currently have a project combining the two together and i really cant work it out (i'm even using html instead of css haha) :/
    Anyway, what i want to do is have a zipper (as in a zipper on ones clothes) on my main page and when someone puts their mouse over the zip, it zips down and reveals the text for that page.
    I have gone into photoshop and started editing a zipper at different stages of being pulled down, but am stuck as to how i'd
    a) link it together on flash/what type of file to save it as?
    b) put the actual code into dreamweaver
    c) have it actually working functionally to reveal my text underneath.
    thanks in advance for any help, i'd be very appreciative of anyone who could give me some advice

    Sorry what you wish to do would involve creating your entire page in flash (there is another way but unless you are competent in JavaScript!),
    In flash create the first and last image then a transition between them.
    As this is a dreamweaver forum, You would be better off visiting the flash forum if you are uncertain on how to do this.
    Flash forum:
    http://forums.adobe.com/community/flash
    Once you have made your flash video, you can insert this into dreamweaver by selecting (from main menu in dreamweaver) insert -> Media -> swf.
    Just as a by-note to realize the effect you wish (if you do not wish an entirely flash site, which I would not recommend), remove your flash code once it has played (or reset the z-index in css), using JavaScript.
    Once you have made your flash (swf file), visit the DHTML section (for the javascript help), then return here for more info.
    PZ

Maybe you are looking for

  • Xml report:Page break issue

    Hi I am working on PO Printing Report.There are mainly three section .1 is Header part which contains informaition like Bill to Address Ship to address,vendor address payment terms etc,middle part contais lots of information like header notes,supplie

  • Lastest Security Update fixes Vulnerabilities...

    It looks as though Apple has indeed fixed the latest issues posted on the web over the last two weeks. I tested the vulnerability as below, and it now fails: http://secunia.com/macos_x_command_execution_vulnerabilitytest/ Scott

  • Problem with popup (new window)

    Hi Experts, We have URLs links in the Easy Access Menu. The browser window is now being opened without scrollbars, IE navigation buttons, nothing! If the URL is called without using the WEBGUI, everything is fine. Do you have a solution for this? Tha

  • Can an intel cam be used with a powerbook G4

    intel cam model CS330 powerbook G4 has no isight/cam and runs OS 10.4.11 No macintosh drivers for the intel cam were found, only for windows OS. Any suggestions for a driver? Photo-booth gives a "no cam found, in use by another program" when launched

  • No sound in imovie using mpeg videos. HELP!

    Hi, im a newbie, so I have lots of questions with sound in imovie. I have a digital camrea which does the mpeg movie thing. so when I import the movie into imovie I see the video but I hear no sound. I know this was covered in some topics, but I bein