Dreamweaver CS3 FTP Issue on Mac

Background Info
My Mac laptop which I had been using perfectly fine for over a year with connecting via FTP in Dreamweaver headed off to the shop last week for an unrelated power issue. In its absence, I purchased a Mac Mini to continue with my design work. I used the migration assitant to replicate the exact settings of my laptop on my new desktop from a backup of the laptop. The fixed laptop was returned to me yesterday.
Issue
I went to upload some site changes I had made from my laptop and up pops the FTP error that there is no respnse from server (http://img.skitch.com/20090810-8muhscacixyxkuidwkc2yiimba.jpg). I tried again with the same result and just thought perhaps that sites server was down or similar. I moved on to another site and I get the same error, and with the third site, I decided it was an obvious pattern. I then decide to try uploading the files with the desktop that I had purchased, and it uploads without a hitch.
So any thoughts on why things would work as usual for the new desktop, but never connect (the FTP log is empty) on the laptop sitting right next to it?
Thanks for your help!

Thanks Samantha for posting back a soution - I'm sure it will be helpful to others in the future :-)
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
http://twitter.com/nadiap

Similar Messages

DREAMWEAVER CS4 - FTP issues

I loaded Snow Leopard onto a new imac last week.
Since loading SL I have not been about to access remote ftp's using Dreamweaver which I have used for years I now get 'permission errors', 'password incorrect' etc.
I also have an older mac here running Tiger and CS3 - no issue accessing ftp's.
The problem I think is Snow leopard interfering with Dreamweaver.
Does anyone have any suggestions other than removing SL and reinstalling Panther.

Hi midnight in oz;
I think there is something wrong with the data you have provided for us.
It is impossible to install Snow Leopard on a G5 iMac as listed in your profile.
Also if your iMac is new one, you will not be able install Panther on it.
Could you please provide us with the correct information so that we might be able to help you?
Allan
Message was edited by: Allan Eckert

Dreamweaver CS3 FTP Error: Cannot make connection to host

I have Windows Vista with a new purchase of Adobe Dreamweaver
CS3 Web Premium. I am a regular Dreamweaver user since version 2.
But this FTP situation still baffles me.
1. I have set up all my FTP parameters as usual and have
tried to use "Passive FTP" and the "Secure FTP" settings, but to no
avail
2. I tried to FTP via explorer and do have access to my
hosting service. The problem lies related to Dreamweaver itself.
3. I tried to check to see if my Windows Firewall would
affect it, but it is included in the firewall exception list.
I checked the other forum listings related to this problem,
and one of them mentions about the 60 second issue. I also checked
my site preferences and it is set to 60.
I don't want to use Cute FTP. I've been using Dreamweaver for
all these years and found it annoying to get another program just
for this. I am hoping to resolve this issue here on the forums so
that other Dreamweaver CS3 users can use FTP to upload their
site.

http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_14834
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_19012
Maybe those will help.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"David J." <[email protected]> wrote in
message
news:fj5vul$mi2$[email protected]..
>I have Windows Vista with a new purchase of Adobe
Dreamweaver CS3 Web
>Premium.
> I am a regular Dreamweaver user since version 2. But
this FTP situation
> still
> baffles me.
>
> 1. I have set up all my FTP parameters as usual and have
tried to use
> "Passive
> FTP" and the "Secure FTP" settings, but to no avail
> 2. I tried to FTP via explorer and do have access to my
hosting service.
> The
> problem lies related to Dreamweaver itself.
> 3. I tried to check to see if my Windows Firewall would
affect it, but it
> is
> included in the firewall exception list.
>
> I checked the other forum listings related to this
problem, and one of
> them
> mentions about the 60 second issue. I also checked my
site preferences and
> it
> is set to 60.
>
> I don't want to use Cute FTP. I've been using
Dreamweaver for all these
> years
> and found it annoying to get another program just for
this. I am hoping to
> resolve this issue here on the forums so that other
Dreamweaver CS3 users
> can
> use FTP to upload their site.
>

Dreamweaver cs3 FTP Fault - Not connecting anymore

Hi,
I hope someone may know the cause of this wierd problem
My dreamweaver cs3 has just stopped connecting to server for
any of my sites
(i got over 100 sites and tried quite a few).
My other ftp program external to cwcs3 is fine and continues
to work. This
using the same connection settings as dwcs3 site profiles.
Nothing has
changed on my dwcs3 profiles but yestarday I had the daylight
saving problem
(and last year) where i had to delete the cache file as per
adobe tech doc.
DW no longer crashing but i think this ftp not connecting is
only since
yesterday.
I have also installed the various windows updates that came
out recently.
The other machines in the office continue to work fine. All
machines import
the same saved profiles, but if i remove the site profile and
reimport it
still dosent connect, but repeating this on another machine
works without a
problem.
All machines in this floor have Vista Business/ CS3 web suite
connecting to
a windows 2003 standard ed server running iis and
iis/microsoft ftp server.
Same result with windows firewall disabled. Only other
security app is NOD
anti-virus, again all machines are the same.
All i get is an error telling me to try passive etc, but i
know this isnt
the fault as the other machines with the same settings are
fine..
here is a copy of the ftp log after trying to connect,
selecting a file, and
selecting put.
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> MKD MM_CASETEST4291
< 257 "MM_CASETEST4291" directory created.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> RMD mm_casetest4291
< 250 RMD command successful.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
> QUIT
< 221
> CWD
/mmdftp/carrs-billington.com/mmdftp/carrs-billington.com
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
The file "/mmdftp/carrs-billington.com/Company.asp" was
skipped because the
old remote file could not be deleted.

If i was that anal about cpu overhead, would i be using
dreamweavers built
in ftp with its feature 100%cpu usage. Even on my core 2
extreme 9000 cpu!!
Thanks for the links, but everything in them has been ruled
out. The issue
is clearly not a setting within dw. Its some sort of windows
firewall
corruption
Even running wf.msc (advanced win firewall config) provides
no clues
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
>> why on earth?? why on earth not!
>
> If you are connecting via a router, wherever you are,
you do not need a
> firewall. Firewalls add overhead to your CPU and can get
in the way of
> other things, unexpectedly.
>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>
> Disabling a firewall is sometimes like disabling Norton
AntiVirus.
> Neither of those will ever see the light of day on my
computers! 8)
>
> Anyhow, you may find this useful -
>
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19012&sliceId=2
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "RyGa" <[email protected]> wrote in message
> news:[email protected]...
>> why on earth?? why on earth not!
>>
>> This is a laptop and only sped 60% of its life in
the office. All
>> machines in here are identical an this is the first
problem with this
>> setup in over 4 years out of 23machines. so i doubt
its a security issue.
>>
>> I have also discover renamining the dreamweaver
folder allows dream
>> weaver.exe to function ok. whatever is causing the
problem it is tied to
>> the full path.
>>
>> Our it people have also copied renamed cuteftp to
match the same path/
>> exe name and it too fails to function but renaming
the exe back to its
>> proper cuteftp name allows it to work.
>>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>>
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> So - you are running Windows Firewall AND a
network firewall? Why on
>>> earth?
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>> ==================
>>>
>>>
>>> "RyGa" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Ok, im getting some where with this...
>>>>
>>>> I found this thread
>>>>
http://dreamweaverforum.info/dreamweaver-general/20168-dreamweaver-ftp-suddenly-stops-work ing.html
>>>>
>>>> which had this solution:
>>>>
>>>> The problem was in Windows Firewall, which
did not recognized the
>>>> Dreamweaver on some way even it was removed
from the Windows Firewall
>>>> exceptions.
>>>>
>>>> The solution is a bit tricky:
>>>> 1. Remove the Dreamweaver from the Windows
Firewall Exceptions
>>>> 2. Copy & Paste Dreamweaver.exe on the
Program
>>>> Files\<Macromedia|Adobe>\Dreamweaver\
directory to a new executable
>>>> filename (e.g. Dreamweaver2.exe)
>>>> 3. Run the renamed program. After the first
FTP connection Windows
>>>> Firewall will ask for permissions for
connection
>>>> 4. Close Dreamweaver and run original
executable. SOLUTION: Windows
>>>> Firewall will ask for the permision.
>>>> 5. Remove Dreamweaver2.exe from WF
Exceptions
>>>> 6. Enjoy developing and uploading new sites
>>>>
>>>>
>>>> Now as i said previously, I have tried
disabling the windows firewall
>>>> but to no avail. but however, renaming (and
coping to a different exe
>>>> name) the dreamweaver.exe file allows me to
launch the newly named file
>>>> and ftp works fine.
>>>>
>>>> But following the solution above makes no
difference if i run the
>>>> original exe, I dont get to re-add to
firewall exceptions even though
>>>> it isnt there anymore, and the dw still
refuses to play ftp.
>>>>
>>>> I think this is a corruption of some sort
with windows firewall.
>>>>
>>>> Id like to get to the bottom of it though,
because after googling for a
>>>> while i see lots of others are having the
exact same issue. Even if the
>>>> problem is windows firewall related and dw
is innocent in all this, its
>>>> still good to have a solution for anyone
else to follow.
>>>>
>>>> I dont think leaving the dreamweaver.exe
called dreamweaver2.exe is it
>>>> as this breaks all the current registry
references to the proper file
>>>> name.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\SharedAccess\Parameters\FirewallPolicy\F irewallRules
>>>>
>>>> "Dooza" <[email protected]> wrote
in message
>>>> news:[email protected]...
>>>>> RyGa wrote:
>>>>>> I should have mentioned. Last night
i took my laptop home as i do
>>>>>> quite frequesntly.
>>>>>>
>>>>>> The problem remains even though in a
completely different
>>>>>> environment, so that rules out
network at work.. I even tried
>>>>>> disabling all security apps (win
firewall, nod and even that win
>>>>>> defender)
>>>>>>
>>>>>> My cuteftp using the same login
credentials (exactly the same)
>>>>>> continues to work without a problem.
>>>>>>
>>>>>>
>>>>>> I have this morning went through the
site area of the dreamwaever
>>>>>> options and double checked they are
the same as the machine nearest
>>>>>> me and they are.
>>>>>>
>>>>>> still no joy..
>>>>>
>>>>> Very odd indeed, maybe backup all the
site files and re-install
>>>>> Dreamweaver? Its a last ditch effort
though, as its a very strange
>>>>> problem.
>>>>>
>>>>> Dooza
>>>>
>>>
>

Dreamweaver CS6 FTP Issues

i have created a site in dreamweaver and as far as i am aware the site works great, i have hosting and webspace with 1and1 and have connected to their servers via ftp, i have to manually upload the site and cannot seem to get the webpages themselves to upload, only the *images* folder and *scripts* upload successfully, i have tried everything i can to resolve this but have had no luck whatso ever, any help would be much appreciated, thanks

May be you can try steps suggested in the troubleshooting document. Most of the points mentioned there are also applicable on DW CS6.
helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html
--Bhawna

Dreamweaver CS3 FTP problem

Hi,
I am unable to connect to my remote server using my new copy
of Adobe Dreamweaver CS3
When I test the FTP connection I get an error message
I can connect without problems to my remote server using
Microsoft Frontpage and the exact same FTP address, login, and
password - so it is not the server which is at fault
Things I have tried without success
My hosting company told me to either leave the host directory
box blank or put a / in it. Neither of these options work
I have tried retyping my login details carefully.
I have tried checking the ‘use passive FTP’ box
I have tried putting a colon and the port number after the
FTP address
I have tried writing the FTP address with and without the
ftp:// symbol
I have tried setting the FTP time out preferences at 60secs,
30 secs, 120 secs, 10 secs, and 5 secs
I am wondering what else to try, and how I can check whether
or not the software is being blocked by a firewall (in Norton for
example - my windows firewall is switched off) as I do remember
getting a message about this during the install. Or would it be a
good idea to uninstall and reinstall the software?
I would be most grateful for any further information or
advice.
Many thanks
Pippa

> When I test the FTP connection I get an error message
What is the error message?
Here's my experience.
1. A firewall (any firewall, including but not restricted to
SP2) may be
blocking your attempts. It's best to completely disable them
while you are
troubleshooting this.
2. The FTP host field should usually always be filled in like
this -
''www.domain.com'' (without the quotes) and with NO leading
protocol (e.g.,
http:// or ftp://) (of course, you can always
use the IP address, too).
3. Enabling Passive FTP (usually the default for 3rd party
FTP programs) in
your Remote site definition can often be the gating factor in
a balky FTP
connection.
Make sure you use those guidelines and usually your
connection problem will
be solved.
By the way, if you find that #1 allows the connection to
proceed, then you
have to figure out what it is about your firewall that is
blocking
transmissions. CS3 allows you to fine tune firewall support
via the
Remote site definition, but you may also need to do a very
simple thing of
permitting CS3 to make outgoing connections in the Firewall
configuration.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Pippa Mattinson" <[email protected]> wrote
in message
news:[email protected]...
> Hi,
>
> I am unable to connect to my remote server using my new
copy of Adobe
> Dreamweaver CS3
>
> When I test the FTP connection I get an error message
>
>
> I can connect without problems to my remote server using
Microsoft
> Frontpage
> and the exact same FTP address, login, and password - so
it is not the
> server which is at fault
>
> Things I have tried without success
> My hosting company told me to either leave the host
directory box blank or
> put
> a / in it. Neither of these options work
> I have tried retyping my login details carefully.
> I have tried checking the ?use passive FTP? box
> I have tried putting a colon and the port number after
the FTP address
> I have tried writing the FTP address with and without
the ftp:// symbol
> I have tried setting the FTP time out preferences at
60secs, 30 secs, 120
> secs, 10 secs, and 5 secs
>
> I am wondering what else to try, and how I can check
whether or not the
> software is being blocked by a firewall (in Norton for
example - my
> windows
> firewall is switched off) as I do remember getting a
message about this
> during
> the install. Or would it be a good idea to uninstall and
reinstall the
> software?
> I would be most grateful for any further information or
advice.
>
> Many thanks
>
> Pippa
>

Dreamweaver CS3 Activation Issue

I have tried Phone and Online support to no avail. I have a copy of Dreamweaver CS3. I just got a new PC and need to move everything over to the new machine. Both are Windows 7 PC's.
On the New PC, when I install everything it is not able to authenticate via the Internet for some reason. So, when I contacted support for the Authorization Code the two he gave me came up invalid and he told me to post my problem here that he could not help me any further.

Hi SIWeb,
See Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html. It is likely that your host file had entries for Adobe added when you installed some other software title.
Thanks,
Preran

DreamWeaver CS3 FTP suddenly stops working

About a week ago DreamWeaver's FTP stopped working, for any
of the 25 plus sites I have set up in it. I control the server I am
trying to FTP to, so I know none of the passwords or anything else
has changed. All of the sites have the same error when trying to
connect, which is:
"An FTP error occurred - cannot open remote folder
/public_html/. Access denied. The file may not exist, or there
could be a permission problem."
Well the folder does exist, as nothing has changed. I am able
to FTP fine with other FTP apps including CuteFTP, so I know this
is a DreamWeaver specific problem. I tried reinstalling / repairing
DreamWeaver from disc to no avail.
Thanks for any help.....

I'd like to chime in too if I may. Dreamweaver is a very
reliable software client but can anyone really backtrack to the
point where ftp puts GUI to shame? Forgive me but I'm stuck using
Dreamweaver as my sole island of hope for all client/ server
transactions.. I'm not even interested in using one of those 'mini'
clients who's functionality do make your head spin! I'm somewhat of
a freestyle learner so maybe that explains why I've never seen the
host-server designated "public" folder renamed as "public_html"???
I don't even think my webhost would let me rename that folder as
such, I hope that helps!
Thanks,
Nate

CS3 FTP Issues in XPSP2

Recently upgraded to DW CS3 on both my laptop and desktop,
both of which were running DW MX2004. Both machines are XP SP2. I
have an issue (across all of the hosting firms I use, 1&1,
Omnis, etc) where my FTP puts will timeout excessively. I have to
click the X in the Background File Activity window to cancel...then
disconnect from the Files pane...then cancel that operation as
well. I wait 20 seconds, reconnect, and then I can put -- after it
tells me about a Synchronization issue where I have to click Yes to
put. This happens 60% of the time on the desktop, but only 3-5% of
the time on the laptop.
Also, when I have to cancel the Put, my web server will only
show a blank page until I can successfully complete a Put. This
includes pages that have been successfully loaded previously...they
"disappear." I've been waiting to see a Dreamweaver update come
through Adobe Updater.........

Do you have passive FTP enabled?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"3daysaside" <[email protected]> wrote in
message
news:f8nrqd$r5o$[email protected]..
> Recently upgraded to DW CS3 on both my laptop and
desktop, both of which
> were
> running DW MX2004. Both machines are XP SP2. I have an
issue (across all
> of
> the hosting firms I use, 1&1, Omnis, etc) where my
FTP puts will timeout
> excessively. I have to click the X in the Background
File Activity window
> to
> cancel...then disconnect from the Files pane...then
cancel that operation
> as
> well. I wait 20 seconds, reconnect, and then I can put
-- after it tells
> me
> about a Synchronization issue where I have to click Yes
to put. This
> happens
> 60% of the time on the desktop, but only 3-5% of the
time on the laptop.
>
> Also, when I have to cancel the Put, my web server will
only show a blank
> page
> until I can successfully complete a Put. This includes
pages that have
> been
> successfully loaded previously...they "disappear." I've
been waiting to
> see a
> Dreamweaver update come through Adobe Updater.........
>

FTP issues on Mac OS X Server 10.6.4

This is my first server ever working with so you'll have to bear with me
I just set up the server with FTP and all is well, but I have a few issues:
1. When connecting to the FTP server on a Windows machine with my standard FTP program or in the Firefox web browser, it does not direct the user to the root folder I have set in the Server Admin Settings. I have it set to "/Library/FTPServer/FTPRoot", which has all the share points, but instead the user will see their home folder. On Mac it works fine, they see the share points.
2. When connecting to the FTP server in Firefox, I get "550 (filename): Not a directory" error when trying to download a file from the list, but I can view directory listings fine.
I'm sure it just some setting I've missed, but I can't seem to find a solution to this. Any idea what's wrong?

Any ideas? Still struggling with this problem...

Lightroom/CS3 color issues on Mac

Hello,
I've seen a few posts about color issues, and I've tried following the advice posted, and I'm still having a problem. My photos appear fine in PS and in Lightroom (as well in in Mac's previewer) but when I upload them to the web or view the saved file on another computer, they appear severely desaturated with a blue tone.
I'm using running Mac OX X on a new MacBook Pro. I have Lightroom and CS3 installed and fully patched.
I am shooting in RAW with my Nikon, and importing the photos to Lightroom. In Lightroom, I choose "edit in CS3" and then the file opens in CS3. My settings for that are to open it as a 16 bit PDF ProPhoto RGB. My color settings in CS3 are set to ProPhoto RGB working space, preserve embedded profiles, ask when opening and pasting.
The files still look great when I open them in PS, and then I save them and when I look at them again in Lightroom they also look good (the same). However, if I export them as .jpgs from Lightroom, or save them directly from CS3, they lose their color quality.
I've found that if I change my proof setup to "monitor RGB" then I can see the photos the same way they appear when saved (the bad, desaturated version).
I would really appreciate any help anyone could provide. I am generally happy with my Lightroom/CS3 workflow, but I'm totally baffled with this color issue.
Emily

Well, I think what you need to do is get a better grasp on the fundimentals of color management-which is a bit beyond the scope of what the forums can offer you.
The bottom line is that Lightroom & Photoshop CSx (meaning past CS or actually even back to 7) can and does make use of display profiles (you can't turn it off even if Photoshop has a setting that makes you think you can). An image in Lightroom and Photoshop is always color managed...outside of an app that is color management, all bets are off.
Save, assigning and converting to profiles are all very different. Photoshop CS3's color settings are absolutely critical because that's how you deal with managed and unmanaged color.
Until you learn different, I would suggest that you set your CS3 color settings to North American PrePress 2....if you want images for the web, Convert To sRGB or use the new Save For Web (which can now do the sRGB conversion-finally).
For other uses and purposes, I would suggest that you seriously consider using Adobe RGB-until such time that you understand the implications of using Pro Photo RGB.

Dreamweaver CS6 ftp issue

I have for years used Dreamweaver as my primary WYSIWYG design app at work. Recently I installed CS6 at my home as a 30 day trial and I am very interested in a subscription to the new Creative Cloud.
Everything installs fine and I am able to set up a ftps on port 990. I am also able to do this for multiple ftp connections. After a few days of working fine and transferring multiple files the program can no longer make connection with the host. There are a few blogs about this and the recommend only switching sites while in local view of the site, but I have tried the install 3 times on a clean system and always the same result even after only setting up one ftp connection.
I would be interested in herring from other people experiencing this issue.

After a few days of working fine and transferring multiple files the program can no longer make connection with the host.
Maybe your host server is having a bad day. Are you sure it's not down?
Nancy O.

Dreamweaver CS3 FTP Site Chnage

When building an ftp site to a server from Dreamweaver....In
DW8 when I build the site and download a page to edit - all
dependent files (images) come wih it and I can see everything I am
editing....In DW 9 (CS3) I only get the page - no images - am I
missing a setting somewhere??

PREFERENCES | Site > Dependent files > Prompt on
GET/PUT.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"hunter_2000" <[email protected]> wrote in
message
news:f56ae4$j8o$[email protected]..
> When building an ftp site to a server from
Dreamweaver....In DW8 when I
> build
> the site and download a page to edit - all dependent
files (images) come
> wih it
> and I can see everything I am editing....In DW 9 (CS3) I
only get the
> page - no
> images - am I missing a setting somewhere??
>

Dreamweaver CS3 FTP Error

Dreamweaver CS on Vista Pro, everything has worked fine for
the last 5 months I have been able to ftp to all my sites. Then
last week I started getting the following when I tried to connect
to my sites:
quote:
Operation timed out...canceled...An FTP error occurred -
cannot make connection to host. No response from the server. This
may be due to one or more of the following reasons:
- Accessing the server requires firewall settings that aren't
properly set. Please verify that the firewall settings in the Site
category of the Preferences dialog box are properly set, and that
the Use Firewall option in the Site definition dialog box is
selected.
- The server may be accepting only passive mode or only
active mode. Toggling the "Use Passive FTP" checkbox may help you
establish a connection.
I'VE TRIED
THIS A FEW TIMES
- If you are connecting to an IPv6 enabled server, please
select "Use IPv6 transfer mode" checkbox in the Advanced site
definition dialog. THIS IS NOT THE CASE AS CONFIRMED BY THE HOST.
- Your local firewall may be blocking the incoming FTP data.
Please disable it to see if it makes a difference. THIS HAS BEEN
TESTED A FEW TIME WITH NO LUCK.
- It is possible your FTP may be using a non-standard FTP
port (21). If you need to specify a non-standard port, enter the
port number after host name separated by a colon":". THIS IS NOT
THE CASE AS CONFIRMED BY THE HOST.
I have no problem connecting using CuteFTP and using the
exact same settings as used in Dreamweaver. Also weird is the fact
I would connect to a site, and then come back latter that day and
could no longer reconnect. It was like I was able to only connect
one time with site after this started happening. Now No sites are
able to be accessed through Dreamweaver FTP.
Anyone else experiencing this and/or have a solution?

http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Pala32" <[email protected]> wrote in
message
news:frpevj$j33$[email protected]..
> I'd also really like to find a solution to this. I've
been connecting, no
> problem, to several servers, for many months. Now I get
this Message and
> can't
> connect to anything with C3. DW MX works as do other
apps.
>

Dreamweaver CS3 ftp won't connect

Very unusual ftp problem: Server is MS IIS. I have multiple
Dreamweaver sites defined for this server. Been using them for
years. All sites connect fine except one. The one initially worked.
For the one problem site, clicking the Test button in Remote Info
tab connects just fine. Clicking the Connect button in Files will
time out every time. Using WSFTP to the same site and folder works
just fine. The only difference between this site and the ones that
work is the folder name. They even share the same parent folder.
ftp connection parameters are the same. How can this be?

I solved it myself. It turned out to be a corrupt site
definition in Dreamweaver. By deleting the site, then recreating
it, everything works as it should.

Dreamweaver CS3 FTP Issue on Mac

Similar Messages

Maybe you are looking for