Dreamweaver CS5.5 cannot install this extension
In Dreamweaver CS5.5 install digital page extension, display cannot install this extension, please advise why, thank you
It is Recordset NavSuite,used in ASP,Such as 1, 2, 3, page style
Similar Messages
-
When I try to install GuideGuide extension this error message popups " This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again."
Photoshop CCHi,
Have you ever uninstalled Photoshop CC and installed Photoshop CC 2014, or uninstalled Photoshop CC 2014 then installed Photoshop CC?
If that, please re-install you uninstalled Photoshop, and remove GuideGuide from Extension Manager before uninstall.
Another option is remove extension manager database file, then launch Extension Manager to install it.
C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db (Windows)
/Library/Application Support/Adobe/Extension Manager CC/Configuration/DB/ExMan.db (MAC)
But please notice that all your previously installed extensions will not be shown in Extension Manager after you removed database file. -
I just updated my MacBook Pro to 10.7.5 and got a message that the AppleUSBEthernetHost.kext was improperly installed and cannot be used. How to I find and install this extension?
Open the AppleScript Editor in the /Applications/Utilities/ folder, copy and paste the entire following line into it, and press the Run button:
do shell script "chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext" with administrator privileges
If it doesn’t work, throw that item away and then reinstall iTunes.
(114264) -
Exit code 7 on Dreamweaver CS5.5 install
Hi,
I keep getting Exit code 7 during my dreamweaver CS5.5 install.
A little information about my machine:
- I have CS5 Master collection installed
- I have Flash Pro 5.5, Air for Apple iOS and Flash builder 4.5 installed.
- I HAD Flash Builder 4.6 prerelease installed (I uninstalled it and installed the regular 4.5 again).
What I've tried:
- I've uninstalled AIR, Flash player & ActiveX control (some people reported this fixes problems very similar to mine)
- I've uninstalled Dreamweaver CS5 from my Master collection
- I've done the /unreg /regserver commandline thingy Adobe suggests
- I've tried installing in Diagnostics mode
- I've tried uninstalling and reinstalling my CS5.5 programs (FP & FB)
None of these things seem to work.
Does anyone have any idea on how to fix this?
(I just reinstalled Flash Pro 5.5 & Flash Builder 4.5 from the same DVD (CS5.5 Web Premium) and those work fine)
Heres my full error log:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 4 error(s), 9 warning(s)
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {D5CC77BE-BC5B-424E-8E45-DF60AFF7BE9C} Pixel Bender Toolkit 2.0.0.0 is already installed and the session payload {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {66173EC7-974E-4652-9468-4A93D2481BF0} CSXS Story Extension 1.0.0.0 is already installed and the session payload {3450d4c5-a82b-4428-a512-842ee1555a14} CSXS Story Extension 2.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin 10.1.52.14 is already installed and the session payload {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {78A53622-CDBA-49D1-A3D0-D563FB398D0C} AdobeColorCommonSetRGB 3.0.0.0 is already installed and the session payload {45063C56-A2A2-4FD1-A56A-A964723EEE1E} AdobeColorCommonSetRGB 3.1.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {39CB2E53-5326-4939-8B5A-0402C6EFBFE3} AdobeColorCommonSetCMYK 3.0.0.0 is already installed and the session payload {54D89F03-8EED-4FF9-BCDF-3B2E11D448A6} AdobeColorCommonSetCMYK 3.1.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX 10.1.52.14 is already installed and the session payload {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {925ED7E4-E1B6-4544-8141-1C98A18D2E2E} AdobeOutputModule 3.0.0.0 is already installed and the session payload {AC003BC0-704F-4F02-A72E-AC8B7044DE24} AdobeOutputModule 3.1.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
ERROR: DW020: Found payload conflicts and errors:
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
ERROR: DW020: - Adobe Flash CS5.5 depends on Adobe Flash Player 10 Plugin to be installed.
FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.You need to uninstall the whole of CS5 and use the Creative suite Cleaner Tool and start from scratch. Al lof your errors are shared components which may already have been updated and thus have a higher version than the one that comes with your CS5.5 product, hence the installer considers them invalid and bunks up...
Mylenium -
Cannot Install this Hardware - The system cannot find the file specified.
I got an 8G ipod touch last week. When I plug it into USB port on my PC, a Found New Hardware Wizard box pops up with "Cannot Install this Hardware", "There was a problem installing this hardware: Apple Mobile Device USB Driver", "An error occurred during the installation of the device", "The system cannot find the file specified.", "Click Finish to close the wizard.". If I go ahead and click finish, the device disappears and a couple of seconds later tries to install again and the box pops up again. However, if I leave the box alone, the ipod does actually appear in itunes and I can sync music to it, so all is not lost Any ideas though how to stop this error box popping up? The USBAAPL.SYS driver exists - I don't know what file it cannot find. Thanks.
Hi and welcome to Discussions,
if you have a Leopard OSX DVD you can use it to install the BootCamp 2.0 drivers and later use the BC Update 2.1 for XP to further update the drivers.
If not (still running OSX Tiger) there are two possibilities:
use this direct download link for the latest ATI/AMD Mobility Driver package http://ati.amd.com/online/mobilecatalyst/
or use the ModTool found here http://www.driverheaven.net/modtool.php in conjunction with the ATI/AMD Desktop Driver package.
You should also consider getting and installing the latest (June 2008) DirectX 9 package from Microsoft.
Hope it helps with your gaming problems.
Stefan -
"Found New Hardward Wizard" tells me I Cannot install this hardware
When I plug my ipod in the "Found New Hardward Wizard" appears. It displays:
cannot install this hardware
An error occurred
The data is invalid
After this the ipod does not appear in My Computer, I have looked on Device Manager in Universal Serial Bus Controller but it does not appear there either.
The ipod screen lights up when connected but it will not charge. PLEASE HELP ME.Try to use different USB ports..
Plug in the USB cable to the port first and then to the iPod adjust if necessary.
Buy or borrow another USB cable.
Try to plug the iPod into another computer
Get the newer iPods :P -
New ipod - "cannot install this hardware" and "access is denied"
Over the weekend I got a new iPod Video. Previously I had an iPod Photo. This new one plugged in just fine on my two computers at home but will not install to my work computer.
It will work as I can play and transfer files through iTunes, but everytime I plug it in I get USB errors:
"Windows cannot install this hardware - access is denied"
In the Device Manager it gives me a "Code 28"
Like I said, it does seem to work, I just want to make sure this isn't going to screw anything up when I plug in each day and get these errors.iPods use the standard Windows USB mass storage drivers. it is possible for those to go walkabout on a PC. if that is what has happened to you, the techniques from this MarkJones post may be of some assistance:
MarkJones: Re: Windows XP (SP2) Laptop only finds generic "New USB 2.0 Device" -
Cannot Install This Hardware (Urgent!!)
I just got an ipod nano as a present today and i went to put music on it and i can't even get it connected to the computer. When i plug the nano in i get the 'found new hardware' wizard. But when it goes to search for the software to install it i get "The Hardware was not isntalled because the wizard cannot find the necessary software"
i've had an ipod mini for a year and a half before this so i thought it might've been the old itunes/ipod software so i uninstalled all of that and reinstalled with the new software. That didn't help and ive tried that several times.
ive also tried using the manual disc thing (pressing the menu and select button then pressing the select and play) and ive tried restarting the nano.
i thought maybe it was the wire that connected it so i went and got the wire from my mini and that won't work either.
help!! im leaving on a trip tomorrow morning and need to get this fixed today+It recognize it as a digital still camera but when it goes to transfer the drivers it say Cannot Install this Hardware Data error ( cyclic redundancy check). If I go to the device manager it say the drivers for this device are not installed. (code 28) any one have any clue on what to do+
"Cyclic redundancy check" can indicate disk damage on the PC. If the disk damage is in the area of driver files, you can get similar messages from your device manager. Seen this happen once or twice with USB Mass Storage Drivers and iPods here at Discussions (even down to the code 28), although it was pretty rare as causes for iPod errors go.
So, it might be worth running a Chkdsk over your C Drive:
How to perform disk error checking in Windows XP
Does the chkdsk find/repair any damage?
If so, does that get you past the problem with the iPhone? -
Cannot Install This Hardware (audigy 2 zs gam
i have a Sony vaio pcv-rx650, xp home sp2, plenty of pci slots, updated chipset(motherboard), updated bios, and every other update i can find find on sony /microsoft support. yet from the first time i tried to install my sound card following the instructions i have Ben getting the same two basic errors.
the instructions say to install the soundcard, turn on computer, cancel "hardware update wizard", insert disc and follow instructions.
. when canceling the update wizard it tries to install the card anyways. not once but three times: Multimedia Audio Controller, IEEE 394 Controller, and PCI Input Device. at the end of which it says "Problem with hardware cannot install". alright no problem I'm not done with the instructions but it didn't say anything about this.
2. I go through the lengthy driver software install only to receive an error with driver install. it reads"Cannot Install This Hardware. there was a problem installing this hardware: Multimedia Audio Controller. An error occurred during the installation of the device. The Data Is Invalid" this little phrase has become the bane of my existence.
Naturally i seek out alternati'ves. i uninstall every last reference to software i can find. after talking by e-mail with the support people i tried the CTZAPXX.exe method using msconfig during to avoid conflicts....
Now i have tried this method with drivers that shipped with the card i have also tried it with the web update drivers even the new one that just came out that combine the two old ones. i have even tried a whole new card just in case it was broken. i have searched all over sony's web site for anyone else that is having this problem and found no one. i have gone into the bios and disabled the onboard soundcard and all non essential ports. i have even tried toggling every setting that the knowledge base suggested(that i could find). yet everytime its the same. new hardware is detected multimedia, IEEE, PCI input all three. and always the same error exclamations in device manager before i can even begin to install the drivers. when i try to install the card using hardware wizard it recognizes it as a SB Audigy sound card but when the drivers are finished installing the same error comes up "the data is invalid".
why does this keep happening. i have never had this much trouble with any hardware on any computer ever. this is more frustrating than i can express in an e-mail. its been months now. i really want my audigy obviously. but i am at an impasse.I've the same problem here: "Data Is Invalid"
I've spent -read wasted- an inordinate number of hours troubleshooting this.
So far, installing the Audigy 2 ZS is impossible for me on WinXP Pro SP2.
What have I attempted so far?
* Clean install of OS w/SP2 with and without soundcard in a PCI slot.
* Tried all PCI slots.
* Installed downloadable drivers, in correct order.
* Installed from CD, "drivers only" AND full install of everything under the ZS category.
* Tried the PNPREG.EXE -l business... nada.
* Onboard audio disabled in BIOS.
* BIOS told that OS was and was NOT PnP.
* Uninstall/reinstall of drivers in "Normal" Windows and Safe Mode.
* Device manager driver update with both CD and extracted downloaded drivers.
* CTZAPXX.exe on both install and uninstall modes.
Every time, the install process chokes when it gets to (WDM) WDMAUD.DRV
Still the Device Manager bang sits there on "Multimedia Audio Controller". Searches on MS Technet with combination of keywords Audigy, driver, error and SP2 yield nothing of use.
I DID find a way to install the card- Only have SPa installed on Windows.
This is unacceptable and it is not justified not having SP2 installed just because of one lousy driver for an audio card.
I believe my only hope of success is to install, again, Windows with SPa only and ensure the card works... then install the SP2 package.
Assistance would be _greatly_ appreciated. All drivers on computer are current and official, and BIOS is current. No overclocking either. I'm not really interested in selling this audio card, but...
Best regards-
<img src=http://home.austin.rr.com/viajar/wdm.jpg>Message Edited by Midtower on 0-4-2004 08:45 PM -
Every time I try and install an extension for Safari I get the error message "Safari can’t install this extension, An error occurred while installing the extension “Pin It Button”." I have all the latest updates, working on OS X Yosemite v 10.10.2 / Safari v 8.0.3. Any suggestions?
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to search for an item named "Safari Extensions List". If found, delete it. Quit Keychain Access.
Quit and relaunch Safari. -
: I have recently purchased a iBook G4 Mac OS X VERSION 10.5.6 and I cannot install any apps such as firefox, adobe reader, it reads you cannot install this file on this disk
Are you saying the iBook G4 you have is running OS X 10.5.6?
The next file to get for it would be the Combo update 10.5.8 for Leopard.
And any old archived Flash player for 10.5.8 from Adobe flash site.
A browser such as TenFourFox, iCab, SeaMonkey-PPC, these are OK
but you won't be able to go past Leopard 10.5(.8) in a PowerPC Mac.
All these are free bits, however anything past 10.5.8 Mac OS X
would require a newer Mac with Intel-based architecture. Macs
made in 2006+ can see later OS X versions.
Good luck & happy computing! -
EVER SEE THIS MESSAGE "cannot install this software on this volume (null)"
Hi All,
I am trying to see what this message is all about. I have used LimeWire without a problem and now not only does the program not launch, my mac gives that message if I try to reinstall.
"cannot install this software on this volume (null)"
I have tried restarting, and also reinstalling on my external HD, but still no go.
Could it be something to do with my prefrences?
Thanks In Advance.
RC
iMac 20Jesh Rocco thats a great qustion did you try using 'find' Lime Wire and then trashing everythingf before reinstalling?
Dahhhhh That worked.
RC -
Safari can't install this extension...
After the last up-dates Safari extensions broke. Now unable to reinstall all extensions.
Have been able to work around this in the past but nothing I did before works now.
"Safari can’t install this extension" An error occurred while installing the extension...
OSX 10.10.3, Safari 8.0.5 (10600.5.17)
Thanks AllBack up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Why my iphone 5 still cannot install this update? I've clicked the download and install button but it do nothing, im using wifi and the baterry is 100% but still, it do nothing when i've clicked! Help!
Reset the phone (no data loss): Press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears. After the phone restarts, try updating again.
-
Alert: you cannot install this software on your computer
I purchased a used iMac on CL. The owner said he had reinstalled the original OS (v10.6.4 and upgraded it to v10.6.8. to remove his personal data. He did not install the Applications disk. The computer works fine. The model identifier is iMac 10.1. He gave me what he said were the original gray Apple-logo Applications and OS dvds. I tried to install the Applications DVD but receive the error " Alert: you cannot install this software on your computer." He says these are the original disks. I'm new to the Mac and would like some help. Thanks.
See > iLife '11 Installation Failed? Please...: Apple Support Communities
Sounds like you might just need the > Mac OS X 10.6.8 Update Combo v1.1 which can be installed over the 10.6.8 system version.
Then if that doesn't work, start over fresh and use the combo update above.
Maybe you are looking for
-
How to delete the server side sessions
Hi All, I have a wireless application and it is accessed through ptg/rm gateway from a PDA browser. Oracle wireless AS gives default login page (when the application is accessed through ptg/rm gateway) and when user login, user information session mi
-
Search have no access to files in control panel
I operate windows 8. Normally when I need for some files in control panel such as device manager, windows update. All I need is to search it from search button on the right side of windows. However, one day most of the shortcut if not all are no long
-
I tried changing my password, and it changed to one that wasnt it, and i dont know it. So i tried it too many times and now its saying it is disabled, connect to itunes. but a problem is that my power button on top is broken. how to i fix it?
-
Application Server File problem
Hi, I have a program wherein I download the report output to the Application Server. Everything is working fine but after 60000 records, the Directory Path and the time stamp is getting displayed in the application file. Nothing specifically is coded
-
My idvd only lets me encode files as best performance instead of professional quality which takes up less space. Usually i wouldn't mind except i now have to buy more expensive dvd's that hold more capacity and ideas on how to burn at high or profess