Dreamweaver CS5 with PHP, not getting it to work with virtual Host

I have not got far with the book so far.  I am still on the second chapter where you set the Virtual Host but after setting up the Dreamweaver site definition and doing the test.  I get the error that page cannot be found.
I ask if I can mail the text file of the http.conf and the httpd-vhosts.conf to anyone to see if I screwed up somewhere .  I am running on Windows 7 with the WAMP setup.

Mr. Powers,
I used your included file httpd-vhosts.conf.  And it did something since now I get a new set of errors.
( ! ) Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
( ! ) Fatal error: Unknown: Failed opening required  'C:/vhosts/phpcs5/lesson02/site_check.php'  (include_path='.;C:\php\pear') in Unknown on line 0
But I checked the properties of the folders and unchecked the 'read only' permission but still gets checked again.  I am using Windows 7 64-bit.
I checked on the web nobody says any solutions about it, they only imply that is a permissions issue.
I apologize, I found out the chapter files were encrypted... thanks

Similar Messages

  • Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email.  t worked, but only for those with PC.  I could not get it to work with Apple Yosemite even with reader installed .  is there a way i can make it work for apple /

    Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However,  I could not get it to work with Apple loaded with Yosemite even with reader installed .  Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
    Thanks

    LiveCycle = XFA forms.
    afaik - These cannot be used in Apple OSs.
    Be well...

  • I can not get website to work with ShockWave

    I don't know where to post this, but I need some help with it.
    Back in 1997 I was using Director, which I no longer have. At that time I created a website that contained some interactive pages where I had used Director to create content the required using Shockwave.
    I now have a MBP running system 10.6.2. I tried to open the pages in Safari and I get a dialog box telling me:
    "Some content on the page can’t be shown because its MIME type is unspecified."
    I downloaded Shockwave and Flash from Adobe, I restated my computer and still get the same message. I am not sure if ShockWave works with 10.6.2 or not.
    I am wanting to get the content of the pages so that I can use them on something else. If I could open the interactive pages I might be able to copy and past them off the webpages. Or if I could open the files with some other program then I could recover the content. Recovering the content is my goal, not running the interactive files online.
    Anyone have a suggestion?

    HI,
    It's possible (more like probable) the software you used to create the site isn't compatible with the latest version of Flash. I'm pretty sure why you are getting this... "Some content on the page can’t be shown because its MIME type is unspecified."
    Go to the Adobe Director support area here...
    http://www.adobe.com/products/director/
    You can ask their customer service for suggestions so you can extract the data from your site.
    Carolyn

  • HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

    I have a hdmi dock connector and can not get  it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

    With what apps?  Not all apps require video output.

  • E1200 - Could not get it to work with Apple Airport

    Could not get it to install and gave up after tearing out my hair in frustration
    What's great about it: Still wondering
    What's not so great: Everything else
    About me...
    Internet phone user
    Business Professional
    No, I would not recommend this to a friend.
    I use it in...:Small home

    Before I suggest you any troubleshooting steps, I would like to ask few questions. Like – in what manner you were trying to connect Airport Express with the Linksys/Cisco router E1200?
    Basically, you can think of Airport Express as a wireless extension cord for replacing an Ethernet cable, a USB cable, and an audio speaker cable. So, it suppose to work wirelessly with the router. So, in this case you have to use the Linksys/ Cisco router E1200 as a Base Station, with the Apple AirPort as the repeater/secondary access point. (The protocol for this is called WDS. Apple's routers support it; the Linksys does as well.
    Here are the steps to configure;
    Configure your Linksys router (open a web browser to http://192.168.1.1):
    Assign a wireless channel. You will have to set the same channel on the Airport Express.
    Write down the MAC address for the wireless interface (under the Status tab).
    Provide the security level which can match with the Apple Airport.
    Configure your Airport Express (using Airport Utility):
    Under Airport -> Wireless, set the Wireless Mode to "Participate in a WDS Network", and set the network name, security, password, and channel to match that on the E1200.
    Now you'll have a new tab: under WDS, set the WDS Mode to "WDS remote” and the WDS Main to the MAC address you wrote down above. Also make sure to that "Allow wireless clients" is checked!
    Under the Internet tab, set Connection Sharing to "Off (Bridge Mode)".
    Click Update. Wait for the Airport Express to restart.
    Check it:
    Once the Airport Express is restarted, reconnect to your wireless network (if you've been disconnected). Make sure you can see both your main Linksys router (in a web browser) and the Airport Express (in Airport Utility). If you can only see one, it didn't work. Try disabling security on both.

  • Just bought Apple TV and could not get it to work with my iTunes.

    iTunes can't find Apple TV. Tried reinstalling iTunes and even went disconnect ATV, router and modem...restarted my Mac pro. Still did not work! Changed my router channel and checked my config as well....
    ATV is able to work with the trailers and radio including UTUBE. What is wrong with iTunes?

    You might have more luck asking in the Apple TV forum http://discussions.apple.com/forum.jspa?forumID=1185

  • I can not get Safari to work with my Alienware MX18 running Win 7 Pro 64Bit

    Any suggestions on how to correct the problem?

    Could you walk us through the problems you're having with running Safari, please?
    (If you get an error message, let us know what it says. Precise text, please.)

  • IPhone 4 quit vibrating n can not get it to work with ibrate

    Can any one help me my iPhone 4 quit vibrating n I can't get to work

    Hey Little poignant,
    Thanks for the question. I understand that your iPhone 4 is no longer vibrating, let's double check the settings to make sure everything is configured properly.
    Settings > Sounds > Vibrate on Ring (Make sure this is ON)
    Settings > Sounds > Vibrate on Silent (Make sure this is ON)
    Settings > Sounds > Ringtone > Vibration (Make sure this is not set to "None")
    If the above settings are configured properly, we'll need to isolate this issue further. I recommend restoring your iPhone as outlined in this article:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • I use incredimail for my email and can not get it to work with foxfire for sending links etc

    i will try to email a link and at first it went to outlook but i use incredimail so i need to know how to make it launch incredimail
    == This happened ==
    Not sure how often
    == everytime i try to send a link

    See this KB article.
    [http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox]

  • Anyone with a new iPod Shuffle that works with Powerbook G4 OSX 10.3.9 ???

    I just bought the new iPod Shuffle also and my Mac OSX 10.3.9 operating system is not recognizing the iPod. This is a big issue since they are supposed to be compatible.
    I called AppleCare 2 times and spent 1hr+ at the Apple Store Genious Bar. Here's the deal ... basically the new iPod Shuffle is NOT compatible with 10.3.9 ... I would guess you are having the same issue. My iPod Shuffle works fine with Tiger OS. The Genious Bar tested my computer with Tiger OS to make sure it wasn't a hardware issue and the iPod Shuffle worked fine ... but not with 10.3.9. This is definately an operating system compatibility issue.
    Let me know if anyone has the same issue or better yet ... if you iPod works with Powerbook G4 OSX 10.3.9.
    TS

    I too purchased a new Shuffle and could not get it to work with any software on my PowerBook G4 running the latest Panther (10.3.9). (Only the Disk Utility could see the Shuffle.) I also tried it on my PowerMac G5 running the latest Panther Server, and my PowerMac G4 running the latest Tiger. Given that multiple hardware AND OS configurations were failing, I had to conclude that it was some errant software I had installed on all 3 machines. (As an additional indicator, NONE of my machines would play DVDs anymore: inserting a DVD produced the dreaded "You have inserted a disk containing no volumes that Mac OS X can read.")
    The culprit turned out to be the kernel extensions installed by my (older) Lexar Secure jump drive. These files are in directory /System/Library/Extensions.
    IOLexarEncryptFilter.kext
    IOSCSILexarCommandsDevice.kext
    LexarFilterScheme.kext
    I do not know if it is just one of them or all 3, but I moved all of these files out of the Extensions directory and rebooted. Presto: the DVDs play and the new Shuffle can be seen by iTunes, etc.
    Note that I do not necessarily recommend messing about in the the kernel extensions directory. If anyone has a better method for removing these extensions (I couldn't find anything on the Lexar support site), then I would be grateful for your input.
    Chance
    PB 1.25GHz   Mac OS X (10.3.9)  

  • Dreamweaver CS5 using PHP to connect to Postgres

    Started learning Dreamweaver using PHP to connect to mySql and dynamically load data into a table on my web page.  Dreamweaver worked great as I didn't have to enter any PHP.  Now trying to use PHP to connect to a Postgres DB.   Does Dreamweaver CS5 support PHP connection to Postgres like it did mySql?   Or do I need to enter the PHP commands  to connect and access the Postgres myself rather than rely on Dreamweaver (which I did for mySql)?

    PHP/Postgres is not a supported server model in DW. You'll need to code by hand, or try to find an extension. Try posting over at the Postgressql forums.

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
    So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • How do I extend my WiFi with Airport Express? I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work.

    I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work. I have tried to get it into my network and it get connected via the WiFi but not the Ethernet. Also when it gives a green light I cannot see that it is giving any signals to my devices (iPhone etc).

    You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
    You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
    Now in the AirPort utility you should see your iPhone connected to the AirPort

Maybe you are looking for