Dreamweaver files upload with zero filesize

Hi,
I have created a site using Dreamweaver CS6 and have come to upload it. I entered the FTP details and set it going. (Incidentally, is there a way you can get only files that are actually used in the site to upload, rather than everything you have in the site folder?) However, it seemed to be going very slowly, so I switched over to FileZilla, which I have previously found to be quite quick. Here, the connection appears to timeout so the upload is attempted repeatedly, and when it gives up retrying the selected file shows on the server but with a file size of 0.
Several emails to the hosting company, and a bit of trial-and-error later, it seems that it is only files that come under the umbrella of this Dreamweaver site which will not upload properly. If I select a random file from my desktop, it will upload to the same server, indicating there is nothing wrong with my username/password, ports etc.
Why would it be that only my Dreamweaver files will not upload? It is not limited to html files. jpg files won't upload either. Even jpg's which are not linked to but still in the site folder will not upload!
Any insight would be greatly appreciated, as I would like to put this project to bed!
Many thanks,
David

Can you upload these files to this site with DW (albeit slowly)?
No. With DW or FZ, to this server, the result is the same. DW just sits there saying 0 of 1 completed (or words to that effect) (since I established this is faulty I've only being trying single files, not the whole site.)
Can you upload files to other sites with DW and if so, is the result different?
Yes. If I enter details for another server DW and FZ will upload this site's files with no issue whatsoever.
FileZilla is not able to upload any files that come from DW at all?
No. FZ will upload this site's files created in DW to the second server.
If you put an external file that you *can* upload with FileZilla into a DW site, can you then upload it with DW? Or with FileZilla?
I copied index.html from the site folder onto the desktop, FZ still didn't want to know. I copied the random photo.jpg into the site folder, and that stopped uploading too. However, now whether from the desktop or the site folder, this jpg (and also another, which happened to be sat next to it on the desktop) now stop uploading at 262,144 bytes. Obviously the html files are much smaller at around 7-10kB so it can't be a max file size thing, and anyway a 1.5MB jpg was no problem yesterday.
Are you working within a defined site in DW?
Yes.
Do the site files reside on your local hard drive or an external drive?
Local hard drive.
Which operating system do you use?
Yesterday, Mac OS X 10.7; today 10.8.

Similar Messages

File upload with 'asp vb' backend

Hello,
I am trying to get file uploading with flex (flash buider) working. There are plenty of examples with a php backend, but i need the script for a 'asp vb' backend.
I' ve tried lots of different approaches but can't get it right. Someone out there with a solution?
Thanx!!

Believe it or not I have to do this also.
I have legacy ASP code that uses ASPUpload that I'd like to get working with my Flash CS5 and FlashBuilder Burrito front-ends.
it's just multipart encoded.
So, if you first test it with ASPUpload and a simple form, trying just FILE1 first, and it works with ASP backend then tackle the FlashBuilder side with some debugging.
ASPUpload is still an extremely embedded component on tens of thousands if not more sites, and it was just updated, but I think the previous version just before this update, the one that's out there in code on so many sites, that is what Flash needs to work with.
ASPUpload is doing its part, as it follows all the multipart encoded RFC rules and has worked for years.
I'd love to join you in finding out what's going on here.
This is a long-standing issue.
I've done PHP also. But again, enhancing an interface with FlashBuilder4 or Burrito, to integrate with working legacy code makes it hard when something is not working on the Flash side (it appears anyway) as ASPUpload form posts are extremely easy.

Multiple File Upload With Metadata Using REST

hi all
I want to upload multiple files with metadata to document library using REST API. I am using this msdn article
http://msdn.microsoft.com/en-us/library/office/dn769086(v=office.15).aspx for uploading file. I am able to upload single file to document library but it is not working for multiple file. when I select multiple file it is uploading last selected file. can
anyone help with this. I am using office 365 environment.
Thanks in advance

Hi,
According to your post, my understanding is that you wanted to use the REST to upload multiple files.
Per my knowledge, the REST API is not supported for uploading multiple files via a single call.
You can write your own loop to upload multiple files via an individual call.
http://sharepoint.stackexchange.com/questions/108525/multiple-file-upload-with-metadata-using-rest/108532#108532
More reference:
http://sharepointfieldnotes.blogspot.com/2014/04/uploading-documents-and-setting.html
http://www.shillier.com/archive/2013/03/26/uploading-files-in-sharepoint-2013-using-csom-and-rest.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

File Uploading with two command button

Hi all,
After a long I return back.
I am having a JSP page with some mandatory fields and one attach document field.
I am using JSF framework so for file upload i used the tag <t:inputfileupload>, for compulsion fields I used the attribute required = true.
My problem is,
If i attach the file and click attach button before filling mandatory fields the action method is not called. Only after filling the mandatory fields the action method is called. What may be the reason for this?
Is there any example for file uploading with in form and it has two separate command buttons?

DHURAI wrote:
Hi all,
After a long I return back.
I am having a JSP page with some mandatory fields and one attach document field.
I am using JSF framework so for file upload i used the tag <t:inputfileupload>, for compulsion fields I used the attribute required = true.
My problem is,
If i attach the file and click attach button before filling mandatory fields the action method is not called. Only after filling the mandatory fields the action method is called. What may be the reason for this?My guess: you get validation errors, but you don't have a <h:messages/> in your JSF page so you don't see the error yourself. If you check your log files it will most likely be mentioned there.

Can anyone recommend a free file uploader with progress bar?

Can anyone recommend a free file uploader with progress bar?
I have searched google but with no luck.
Ideally it would be a DW extension but that might be wishing
for too much.
I would like a large file limit for video and multiple file
extensions allowed.
Thanks in advance

Heya,
Check out this due Waleed he has some nice tuts and here's
a
link
to file upload with progress bar tutorial he has. Granted it
looks like it's just an animated gif letting users know their file
is uploading; if you want realtime upload information displayed for
the user you're gonna have to look at something like Flash with the
power of actionscript to achieve that result.
Hope that helps!

Javascript multiple file upload with progressbar does not work in firefox, please help

I want to upload files using this javascript snipped as well as processing non file fields on the same form. This works beautiful in IE11, Chrome and Opera, but not in firefox (version 34).
I fired the non file handler with the action attribute on the <form> like this:
<form id="upload_form" enctype="multipart/form-data" method="POST" action="nonFile.php">
and the javascript with:
<input name="submit" type="submit" style="background: green" value="Submit" onclick="return uploadFiles()"/>
When I change type="button" the file uploads work in FF but the I have no control over the non file fileds.
Can someone gives me an indication of what is wrong?
oXHR.upload.addEventListener("progress", function(e){
var percent=(e.loaded/e.total) * 100;
_(idProg).value = Math.round(percent);
_(idstat).innerHTML = filename.name + " "+Math.round(percent)+"% --- Please Wait";
}, false);
// Upload finish, show the size of the file in Bytes, KBytes or MBytes
oXHR.onreadystatechange = function(){
if (oXHR.readyState == 4 && oXHR.status == 200){
var iBytesTransfered = bytesToSize(filesize);
_(idstat).innerHTML = filename.name + " Size: " + iBytesTransfered + " "+100+"%";
_(idProg).value = 100;
// Upload failed
oXHR.addEventListener("error", function(e){
_(idstat).innerHTML = "Upload Failed";
}, false);
// Upload aborted
oXHR.addEventListener("abort", function(e){
_(idstat).innerHTML = "Upload Aborted";
}, false)

<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0, 0,0" width="600" height="360">
<param name=movie value="example.swf">
<param name="allowScriptAccess" value="always" />
<param name="quality" value="high">
<param name="allowScript" value="opaque">
<param name="wmode" value="opaque">
<embed src="example.swf" quality="high" allowScriptAccess="always" pluginspage="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=Shockwave Flash" type="application/x-shockwave-flash" width="600" height="360"></embed></object>

Threading problem during File Upload with Apache faces upload tag

First I am going to tell you "My Understanding of how JSF Apache Upload works, Correct me if i am wrong".
1) Restores View (to show Input box and Browse button to facilitate users to select a file for upload)
2) Translates Request Parameters to Component Values (Creates equivalent components to update them with request values).
3) Validates Input(Checks to see whether the User has input the correct file)
4) Updates Backing Bean or Model to reflect the values.
5) Renders response to user.
I am uploading huge files of sizes 400MB and above with the help of JSF apache extensions tag
<h:form id="uploadForm" enctype="multipart/form-data">
<x:inputFileUpload style="height:20px;" id="upload" value="#{backingbean.fileContents}" storage="file" size="50" />
</h:form>
In the backing bean
private UploadedFile fileContents;
     public UploadedFile getFileContents() {
          return fileContents;
     public void setFileContents(UploadedFile fileContents) {
          System.out.println("File being uploaded...");
          this.fileContents = fileContents;
Since, the file size is so huge, I am using temp folder to use for the apache tag instead of memory.
In web.xml i am using like this
<filter>
<filter-name>ExtensionsFilter</filter-name>
<filter-class>org.apache.myfaces.component.html.util.ExtensionsFilter</filter-class>
<init-param>
<param-name>uploadMaxFileSize</param-name>
<param-value>600m</param-value>
</init-param>
<init-param>
<param-name>uploadThresholdSize</param-name>
<param-value>10m</param-value>
</init-param>
     <init-param>
<param-name>uploadRepositoryPath</param-name>
<param-value>/uploadfolder/</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>ExtensionsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
The upload process is working perfectly fine.
Now coming to the problem:
Suppose one user is logging into the application & uploading say 400MB of files.
Until these files are linked to the model objects as my understanding of step 2, if second user tries to open the application he gets stuck with the loading page.
The page gets loaded only after the request files are linked to the component values(Step 2 above) and updates the backing bean's values.
I don't see any error in the logs. User is getting stuck. The user is getting stuck only when uploading the files. The other operations like searching are not blocking any other activities performed by the user.
Server used: IBM Application Server V6.0. CPU is normal, memory usage is normal.

Dear friend,
i am also trying to upload using the common file upload.
when try to run the file error is coming
can give some suggestion.
can i use if concurrent user file upload at a time

File upload with non-ascii name

I'm designing a system that includes file-uploads. My problem is that any non-ascii chars in the filename are encoded strangely when saved. ä is encoded to å etc.
I use Tomcat with the -Dfile.encoding="UTF-8" in the Catalina file. I get the same result despite method; my own implementation, apache commons or Javazoom's uploadBean. All the JSP charset parameters are set.
Any ideas?

Hi amitads,
I'm sure u've used Java enough. Also, u must have learned about the \ (backslash) escape character ?
So, if u want to include a string like a single quote, u can write \' and for a double quote u can write \".
Try this ... I'm sure it will help.
Keep me posted.
Cheers !!
Sherbir.

File upload with DAD not working

Hi all,
I have an application which uses the file upload function, similar to the sample http://otn.oracle.com/products/database/htmldb/howtos/howto_file_upload.html
During the development I was not using a DAD and it was working perfectly. Now I have changed the application to use a DAD and now the file upload fails with a HTTP 404 - File not found error
[DAD_din]
connect_string = deccasm01os.na.decoma.com:1521:DIN
;password =
;username =
;default_page =
document_table = wwv_flow_file_objects$
document_path = docs
document_proc = wwv_flow_file_mgr.process_download
;upload_as_long_raw =
;upload_as_blob =
;name_prefix =
;always_describe =
;after_proc =
;before_proc =
reuse = Yes
;connmax =
;pathalias =
;pathaliasproc =
enablesso = No
;sncookiename =
stateful = STATELESS_RESET
;custom_auth =
response_array_size = 128
;exclusion_list =
;cgi_env_list =
bind_bucket_widths = 32,128,1450,2048,4000
bind_bucket_lengths = 4,20,100,400
;error_style =
;nls_lang =
BTW, it is on HTMLDB v1.6 on 9iDB (9.2.0.4)
thx

Rob,
The File Browse item type does not require upload table WWV_FLOW_FILE_OBJECTS$. The POST for the File Browse item type is intercepted by modplsql and is inserted into the Document Table as defined by the Database Access Descriptor.
You could ultimately create your own DAD with your own Document Table. The Document Table would have to contain the minimum definition as described at:
http://download-west.oracle.com/docs/cd/B14099_03/web.1012/b14010/concept.htm#i1005880
This way, users of the application using the Basic Database Authenticated DAD would be uploading directly into your table and not the HTML DB one. A word of caution, though, is that you would never want to use this DAD with HTML DB development itself...you would need to use the DAD that specifies upload into WWV_FLOW_FILE_OBJECTS$ for HTML DB development.
I hope this helps.
Joel

Error "PPE is working" on File Upload with Oracle Portlet running 10.1.2

I am attempting to perform file upload using an Oracle Portlet running under the 10.1.2 Portal.
All the examples I have seen indicate you must identify the encoding type as "multipart/form-data" in your JSP. When I do this and attempt to submit the page I get a blank screen with the words "PPE is working.".
Looking at the "http-web-access.log" on my OC4J Standalone server I can see that the Standalone server never actually receives the request. For some reason it appears the Portal is not forwarding the request to OC4J like it is suppose to.
Can someone tell me what might be wrong? Does anyone have experience implementing file upload using Oracle Portlets and the 10.1.2 Portal?
Thanks,

I have encountered the same problem 4 years before. Finally i figured out, Oracle Portal is not supporting "multipart/form-data".
Work around is write a servlet program to upload the file into DB.
This blog may help you.. http://bsubramaniam.blogspot.com/search/label/Java%20File%20Upload
--Balaji S

Emulating HTTP POST for file upload with J2ME

I have search through a lot of site and couldn't find the actual code. I try to emulate below html with J2ME.
<form method="POST" enctype="multipart/form-data" action="Insert.asp">
<td>File :</td><td>
<input type="file" name="file" size="40"></td></tr>
<td> </td><td>
<input type="submit" value="Submit"></td></tr>
</form>
here is my code :
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
byte[] filecontent = file byte content ...
try {
c = (HttpConnection)Connector.open("http://xx.com/insert.asp");
c.setRequestMethod(HttpConnection.POST);
c.setRequestProperty("Content-Length", String.valueOf(cmg.length + 15));
c.setRequestProperty("Content-type","multipart/form-data");
os = c.openOutputStream();
os.write("file=c:\\abc.png".getBytes());
os.write(filecontent);
os.flush();
I can emulate form with text field and it work, but when it come to file upload, above code not working, I don't know what to put for the outputstream, filename ? content ? or both ? since the html only has one field that is the "file" field. The file is actually store in rms with filename abc.png, and I just put in the c:\ for the server as a dump path.

File upload is more complicated then that... you need multi-part MIME formatting.... But I have just the code...
http://forum.java.sun.com/thread.jspa?forumID=256&threadID=451245

WSRP File Upload with Struts

Hello there
I've been trying to integrate with WSRP a Struts 1.1 web app which provides a simple File Upload functionality.
It works fine as a standalone web application (direct access to the web app).
But I can't get it to work through WSRP from BEA Weblogic Portal 8.1SP4 to BEA Weblogic Server 8.1SP4.
I followed all the steps indicated at http://e-docs.bea.com/wlp/docs81/wsrp/workprod.html#1010271.
Plus I set up the wsrp-producer-config.xml file to handle attachments as follows:
<markup secure="false" rewrite-urls="true" transport="attachment" accepts-mime="true"/>
The start page of the portlet displays fine on the Consumer side.
But upon file upload it never reaches the actual Struts Action on the Producer side.
No error is displayed either on the Consumer or on the Producer side but the file does not get uploaded.
Any idea why ?
Am I missing anything in the configuration ?
Thanks
Patrick
==================================
All I get in the Producer logs is
<6-mar-2006 18.30.32 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP request from/to 10.102.194.96>
<6-mar-2006 18.30.32 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP response from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP request from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP response from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP request from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP response from/to 10.102.194.96>
========
For info here's the Request from the monitor:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<urn:performBlockingInteraction xmlns:urn="urn:oasis:names:tc:wsrp:v1:types">
<urn:registrationContext xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"/>
<urn:portletContext>
<urn:portletHandle>stdgui243 portlet</urn:portletHandle>
</urn:portletContext>
<urn:runtimeContext>
<urn:userAuthentication>wsrp:none</urn:userAuthentication>
<urn:portletInstanceKey>T8005</urn:portletInstanceKey>
<urn:namespacePrefix>T8005</urn:namespacePrefix>
<urn:sessionID>GMlX1KDR8G2dTCHX12FLZy2htBzz5rsTy9H592pWMx0YBtthZgfs!-383570453</urn:sessionID>
<urn:extensions>
<urn1:LookAndFeelDescriptor xmlns:urn1="urn:bea:wsrp:ext:v1:types">
<urn1:skeletonId>default</urn1:skeletonId>
<urn1:skeletonPath>/framework/skeletons/</urn1:skeletonPath>
<urn1:skinId>avitek</urn1:skinId>
<urn1:skinPath>/framework/skins/</urn1:skinPath>
</urn1:LookAndFeelDescriptor>
</urn:extensions>
</urn:runtimeContext>
<urn:userContext xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"/>
<urn:markupParams>
<urn:secureClientCommunication>false</urn:secureClientCommunication>
<urn:locales>it</urn:locales>
<urn:mimeTypes>text/html</urn:mimeTypes>
<urn:mimeTypes>image/gif</urn:mimeTypes>
<urn:mimeTypes>image/x-xbitmap</urn:mimeTypes>
<urn:mimeTypes>image/jpeg</urn:mimeTypes>
<urn:mimeTypes>image/pjpeg</urn:mimeTypes>
<urn:mimeTypes>application/x-shockwave-flash</urn:mimeTypes>
<urn:mimeTypes>application/vnd.ms-powerpoint</urn:mimeTypes>
<urn:mimeTypes>application/vnd.ms-excel</urn:mimeTypes>
<urn:mimeTypes>application/msword</urn:mimeTypes>
<urn:mimeTypes>*/*</urn:mimeTypes>
<urn:mode>wsrp:view</urn:mode>
<urn:windowState>wsrp:normal</urn:windowState>
<urn:clientData>
<urn:userAgent>Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322)</urn:userAgent>
</urn:clientData>
<urn:navigationalState/>
<urn:markupCharacterSets>UTF-8</urn:markupCharacterSets>
<urn:markupCharacterSets>UTF-8</urn:markupCharacterSets>
</urn:markupParams>
<urn:interactionParams>
<urn:portletStateChange>readOnly</urn:portletStateChange>
<urn:interactionState>action=%2Fstdgui243%2Fupload%26module=%2Fstdgui243</urn:interactionState>
</urn:interactionParams>
</urn:performBlockingInteraction>
</soapenv:Body>
</soapenv:Envelope>

Hi Patrick,
Can you try this without accept-mime attribute?
Subbu
>
I've been trying to integrate with WSRP a Struts 1.1 web app which provides a simple File Upload functionality.
It works fine as a standalone web application (direct access to the web app).
But I can't get it to work through WSRP from BEA Weblogic Portal 8.1SP4 to BEA Weblogic Server 8.1SP4.
I followed all the steps indicated at http://e-docs.bea.com/wlp/docs81/wsrp/workprod.html#1010271.
Plus I set up the wsrp-producer-config.xml file to handle attachments as follows:
<markup secure="false" rewrite-urls="true" transport="attachment" accepts-mime="true"/>
The start page of the portlet displays fine on the Consumer side.
But upon file upload it never reaches the actual Struts Action on the Producer side.
No error is displayed either on the Consumer or on the Producer side but the file does not get uploaded.
Any idea why ?
Am I missing anything in the configuration ?
Thanks
Patrick
==================================
All I get in the Producer logs is
<6-mar-2006 18.30.32 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP request from/to 10.102.194.96>
<6-mar-2006 18.30.32 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP response from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP request from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP response from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP request from/to 10.102.194.96>
<6-mar-2006 18.30.33 CET> <Debug> <WSRP-Consumer> <BEA-420550> <SOAP response from/to 10.102.194.96>
========
For info here's the Request from the monitor:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<urn:performBlockingInteraction xmlns:urn="urn:oasis:names:tc:wsrp:v1:types">
<urn:registrationContext xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"/>
<urn:portletContext>
<urn:portletHandle>stdgui243 portlet</urn:portletHandle>
</urn:portletContext>
<urn:runtimeContext>
<urn:userAuthentication>wsrp:none</urn:userAuthentication>
<urn:portletInstanceKey>T8005</urn:portletInstanceKey>
<urn:namespacePrefix>T8005</urn:namespacePrefix>
<urn:sessionID>GMlX1KDR8G2dTCHX12FLZy2htBzz5rsTy9H592pWMx0YBtthZgfs!-383570453</urn:sessionID>
<urn:extensions>
<urn1:LookAndFeelDescriptor xmlns:urn1="urn:bea:wsrp:ext:v1:types">
<urn1:skeletonId>default</urn1:skeletonId>
<urn1:skeletonPath>/framework/skeletons/</urn1:skeletonPath>
<urn1:skinId>avitek</urn1:skinId>
<urn1:skinPath>/framework/skins/</urn1:skinPath>
</urn1:LookAndFeelDescriptor>
</urn:extensions>
</urn:runtimeContext>
<urn:userContext xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"/>
<urn:markupParams>
<urn:secureClientCommunication>false</urn:secureClientCommunication>
<urn:locales>it</urn:locales>
<urn:mimeTypes>text/html</urn:mimeTypes>
<urn:mimeTypes>image/gif</urn:mimeTypes>
<urn:mimeTypes>image/x-xbitmap</urn:mimeTypes>
<urn:mimeTypes>image/jpeg</urn:mimeTypes>
<urn:mimeTypes>image/pjpeg</urn:mimeTypes>
<urn:mimeTypes>application/x-shockwave-flash</urn:mimeTypes>
<urn:mimeTypes>application/vnd.ms-powerpoint</urn:mimeTypes>
<urn:mimeTypes>application/vnd.ms-excel</urn:mimeTypes>
<urn:mimeTypes>application/msword</urn:mimeTypes>
<urn:mimeTypes>*/*</urn:mimeTypes>
<urn:mode>wsrp:view</urn:mode>999
<urn:windowState>wsrp:normal</urn:windowState>
<urn:clientData>
<urn:userAgent>Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322)</urn:userAgent>
</urn:clientData>
<urn:navigationalState/>
<urn:markupCharacterSets>UTF-8</urn:markupCharacterSets>
<urn:markupCharacterSets>UTF-8</urn:markupCharacterSets>
</urn:markupParams>
<urn:interactionParams>
<urn:portletStateChange>readOnly</urn:portletStateChange>
<urn:interactionState>action=%2Fstdgui243%2Fupload%26module=%2Fstdgui243</urn:interactionState>
</urn:interactionParams>
</urn:performBlockingInteraction>
</soapenv:Body>
</soapenv:Envelope>

File upload with jakarta common upload package

i got the code f file upload from the forum but it is not working and giving some errors . I am attaching the code iam using and the stack trace of the errors i am getting . Please if somebody can help me ............
<html>
<form method="post" action="/servlet/UploadFile" enctype="multipart/form-data">
Name
<input type="text" name="uname"/>
File
<input type="file" name="upfile"/>
<input type="submit"/>
</form>
</html>
and the servlet handling the request is as import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import java.util.List;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.commons.fileupload.DiskFileUpload;
import org.apache.commons.fileupload.FileItem;
import org.apache.commons.fileupload.FileItemFactory;
import org.apache.commons.fileupload.FileUpload;
import org.apache.commons.fileupload.FileUploadException;
* @author sm23772
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
public class UploadFile extends HttpServlet {
public void doPost(HttpServletRequest req,HttpServletResponse res)
public class UploadFile extends HttpServlet {
public void doPost(HttpServletRequest req,HttpServletResponse res)
try{
FileUpload fup=new FileUpload();
boolean isMultipart = FileUpload.isMultipartContent(req);
// Create a new file upload handler
System.out.println(isMultipart);
DiskFileUpload upload = new DiskFileUpload();
// Parse the request
List /* FileItem */ items = upload.parseRequest(req);
Iterator iter = items.iterator();
while (iter.hasNext()) {
FileItem item = (FileItem) iter.next();
if (item.isFormField()) {
System.out.println("its a field");
} else {
System.out.println("its a file");
System.out.println(item.getName());
File cfile=new File(item.getName());
File tosave=new File(getServletContext().getRealPath("/"),cfile.getName());
}catch(Exception e){System.out.println(e);}
the exception arising are
as ..........
exception
javax.servlet.ServletException: Cannot allocate servlet instance for path /servlet/UploadFile
     org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:389)
     org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
root cause
java.lang.NoClassDefFoundError: org/apache/commons/fileupload/FileUpload
     java.lang.Class.getDeclaredConstructors0(Native Method)
     java.lang.Class.privateGetDeclaredConstructors(Class.java:2328)
     java.lang.Class.getConstructor0(Class.java:2640)
     java.lang.Class.newInstance0(Class.java:321)
     java.lang.Class.newInstance(Class.java:303)
     org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:370)
     org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

java.lang.NoClassDefFoundError: org/apache/commons/fileupload/FileUpload
this is your error
you need to have commons-fileupload-1.2.jar in your classpath
you can download it from http://jakarta.apache.org/site/downloads/downloads_commons-fileupload.cgi

Flat file upload has zero as dash -

Hi,
I have a .csv that I upload in a datasource. It has a "-" character for zero values.
Is there a conversion routine to convert a - to a 0?
Or another way to handle this easily?
thanks,
Max

Hi Max,
Change the '-' to '0' in the CSV fle itself, save the file, close it & then load the data.
You can press Ctrl+F to replace all the '-' by '0' in CSV at oneshot.
Goto Replace tab after pressing Ctrl+F, enter the following
Find what= -
Replace with= 0.
Then clcik on replace all
Hope it helps!
Regards,
Pavan
Edited by: PavanRaj_S on Jul 2, 2010 4:00 PM

File upload with ODBC

Hi,
I want to upload a file using only the ODBC functions available in PHP to a oracle DB (i'm using a blob column, if this is not correct, please tell me).
I tried uploading it as a "normal" query but it doesn't work, oracle gives error...
So i'm asking if someone could give some snippets of code, tips, links, anything about this issue. Or if this is simply not possible to do with ODBC...
Thanks in advance for your time

This might help.
$handle = fopen($_FILES['filename']['tmp_name'],'r');
$file_content = fread($handle,filesize($_FILES['filename']['tmp_name']));
fclose($handle);
$encoded = chunk_split(base64_encode($file_content));
then the $encoded variable would be used as you blob column value.
Then when retrieving the value you would need to base64_decode() the data to get it back into the original form.
Hopefully this helps.

Dreamweaver files upload with zero filesize

Similar Messages

Maybe you are looking for