Drill down into a report
Hi!
I've been working on a report to be able to drill down into another "detailed" one, and I was able to do it but not exactly the way i needed.
I created an action link for the column values, but my problem is that for EVERY value, i always drill into the same exact report, and my idea is to drill into the same report for all of them, but with different parameters for each one
Example:
Sales representative revenue
John 230K
Mark 100K
Martin 500K
I've set a drill down for the revenue column, but all 3 values are obviously drilling into the same exact report, and I want to set it in a way I can tell the sub report "give me the detail report but only for the corresponding sales representative"
If i click on 230K, I want to see the "detailed report" only for John's oppties. If i click on 500K, I want to see the "detailed report" only for Martin's oppties. And so on...
That's the whole deal. I don't know how to do that.
Thanks for your help,
Martin
Hi, thanks for your answer
I'm navigating from a master to a detailed report, and i have already set the attribute as "is prompted" but Its not enough. Let me try to explain why
Lets say I have this example report:
Prompts: Primary position
Table:
Primary position | forecast
John | 768687
Paul | 200000
George | 923882
then I drill down on "Paul" to the next position level, so the report changes to something like this:
Primary position | secondary position | forecast
Paul | Jane | 100000
Paul | Martin | 100000
So, now... I want to drill into Martin's 100.000 forecast (drill into a detailed report) and despite I have the primary position set as "is prompted", I have no prompts for second, third, or n-position... So If I drill down from martin's 100000 forecast, I will only be able to pass the primary to the detailed report, and It will only be able to show Paul's 200000 forecast details
I want the detailed report to pull Paul for primary, Martin for secondary, and show only the detailed report for that 100000 forecast value
That's the issue
I hope I was clear enough
Thanks,
Martin
Similar Messages
-
Hi experts,
any can help me in this topic Drill-down into AWR reports.A typical AWR report - produced in html format- includes its main categories(for example Top 5 timed events) hyperlinked. By clicking on each one , you can navigate to a thorough analysis of all db parameters regarding it......
Anyway....Can you more specific of what exactly do you want...?????
Greetings...
Sim -
How to setup the drill down on union report
Hi,
I'm setting the union report.
I want to set the drill down to another report.
But I can't setup it.
Would you please tell me how to setup.
Thank you.Hi Hemlatha
In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
Steps to Add a Text Object over a Subreport
1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
the blank spaces will not maintain its size when it has been published on the Web.
====================
NOTE:
You can format the text object with a hyperlink to another report, another file or a URL.
====================
Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
Regards
Girish -
I'm working with a crosstab report displaying summary accounts on each row & current and prior year on each column. I'd like to create a drill down function for each of the summary accounts rows so that when I click on a summary account, the dept# that made up this summary total will be displayed either on a separate report or below the summary account that I click.
Any help would be greatly appreciated. Thank you.
This is what I want to create:
SUMMARY ACCOUNT FY2014 FY2013
600001 - SALARIES 500 380 (i.e. able to drill down to dept below when 600001 is clicked)
701000 - ER DEPT 200 175
757000 - CATH LAB 150 210
848000 - INFO SYSTEM 100 65
851000 - ACCOUNTING 50 50
710002 - BENEFITS 150 140
881000 - HUMAN RES 135 130
900000 - OTHERS 15 10
711003 - SUPPLIES XXX XXXThank you for the referenced thread. I've copied your answer on the thread to this reply below.
However, I do have a few question in following thru your instructions:
1. How do you procede with the 1st 3 bullets below?
2. What or where is the Business Object Platform?
3. What or where is the "Repository"
Please advice. Thank you.
Here are a few ways you can drill-down into a cross-tab (all of them are workarounds by the way).
The first method is using Report Parts or ‘Another Report Object’ and the second method is using an ‘OpenDoc’ URL
Both the methods need the target report (report that is opened when drilled into) to have the same groups as the Crosstab
The ‘Another Report Object’ can be setup in the following way:
The target report needs to saved to the BusinessObjects Platform first
Open the target report in the Crystal Report designer from the ‘Repository’
Assuming the groups have been setup properly, click on any field in the details section and ‘Copy’ (Ctrl+C)
Open the Report with the Crosstab
Right-click the Summary Field on the Crosstab and go to ‘Format Field’ > Hyperlink
Then Check ‘Another Report Object’ and click on ‘Paste’
All the required information should be populated automatically
This is how the Data Context should look like:
“/”+GridRowColumnValue(“Customer.Country”)+”/”+ GridRowColumnValue(“Customer.Region”)+”/”+ GridRowColumnValue(“Customer.Customer Name”)
Where “Country” and “Region” are rows in the Crosstab, “Customer Name” is a column in the crosstab.
Similarly, “Country”, “Region” and “Customer Name” are groups on the target report
So, the above formula would make sure the report drills-down to the last group
The next method using ‘OpenDoc’ makes use of the opendocument URL and passes values from the Crosstab to the target report’s parameters
Here’s how we can set this up:
The basic design of the Main report and the target report would be the same as in above, however we would need to create parameters that correspond to the groups on the target report
In this case, we would create three parameters – Country, Region and Customer Name
We would use these parameters as filters on the target report and our record selection formula would look like this:
{Country} = {?Country} and {Region} = {?Region} and {Customer Name} = {?Customer Name}
We would then link the Main reports ‘Country’, ‘Region’ and ‘Customer Name’ with these parameters
Now on the Main report Right-click the Summary Field on the Crosstab and go to ‘Format Field’ > Hyperlink
Check the option ‘A Website on the Internet’ and click on the formula button in ‘Hyperlink information:”; the formula should be as follows:
“/OpenDocument/opendoc/openDocument.jsp?iDocID=6472&lsSCountry=”&GridRowColumnValue(“Customer.Country”)&” &lsSRegion=”&GridRowColumnValue(“Customer.Region”)&” &lsSCustomer+Name=”&GridRowColumnValue(“Customer.Customer Name”)
When any summary value is clicked in the Cross-tab, the corresponding Country, Region and Customer Name are passed as values to the parameters of the target report
Hope this helps!
-Abhilash -
Hi,
Is there any way to display the drill down in webi report. For example:
YearQuarterMonth--Week.......
if the drill the Year option I can able to see all Quarter level measures and if I drill down further I can get into Month level measures and Week level and so on .
But my question is When I drill the Year to Quarter...I want it to display both Year and Quarter and If I drill down further
I want all the measures related to Year ,Quarter, Month and so on
Basically want I need is a tree level hierarchy......Could any one plz help me what all changes I need to make in order to get a detailed report.
Thanks
Sushma
Edited by: Sushma Reddy on Feb 9, 2010 9:44 PMHi,
Try to create a Class e.g Time in universe and objects to that class as year, quarter,month as
Year Object -> data type -> D/N
select To_date('sysdate','YYYY) as year from dual
Month object-> data type -> D/N
select to_date)'sysdate','MM') as month from dual;
Quarter -> data type -> D/N
case when @select(Time/Month) in (1,2,3) then q1
when @select(Time/Month) in (4,5,6) then q2
when @select(Time/Month) in (7,8,9) then q4
when @select(Time/Month) in (10,11,12) then q4
endcase
Then create a hierarch in tools -> hiearchy ->custom hierarchy and add the above class there then in any report (Deski/WebI)
you will get the above hierarchy and use it according to your requirement.
Cheers,
Suresh Aluri. -
It's a drill down into va22, I've done it the standard way, but
it fails:
set parameter id 'AUN' field t_tab-vbeln.
call transaction 'VA22' and skip first screen.
The set parameter executes okay, and if you F1, F9 on the
quotation field in va22 it says the parameter id is AUN.
However, it doesnt appear that it is AUN. If you set that
parameter id to '123' and then go to va22, it's still got the
last quote you used. If you then go to VA03, it's got '123' in
the order field.
I can only assume that sap's incorrectly reporting that AUN is
the parameter ID for VA22, would anyone know what it actually
is?Hi,
AUN is displayed because this is specified in the data dictionary for
the used data element.
When defininte a dynpro field, based on this data element, the parameter
id AUN is proposed.
However, in the PBO of the dynpro, the actual Parameter id AGN is used.
Cheers,
Chaitanya. -
Not able to drill down S_ALR_87013558 in reports
Hello Experts,
I am in strange situation where in I am not able to drill down my budget report S_ALR_87013558 in my development client. But it is working fine in production client.
What could be the reason.?
Please suggest.
Thanks,
Kumar SrinivasanHi Kumar,
Follow below steps in sequence.
1. Please execute CJE2.
2. Double Click on report 12KST1A. Message will come "You are changing an SAP delivery object". Press the tick mark.
3. On Output Type tab, you must have clicked on radio button "Graphical Report Output". Please change the radio button classical drilldown and check "Available on Selection Screen" at the buttom.
4. Save it.
Check your report again and you will have an option there.
Regards,
Amit -
Drill-down lost in Report Builder
Ever since the CFMX7.02 upgrade, we have lost the ability to
drill-down on the Report Builder reports which previously had
drill-down capability. I am referring to summary lines which
contained a link to the detail. Has anyone experienced this and is
there a fix for it?Do you choose PDF instead of flash paper as the output
format? By some reason, the drill-down function does not work in
flash paper format.
Good luck,
Daniel -
HOW TO ADD DRILL DOWN IN A REPORT
hi
well i want to add drill down in my report....
im unable to find it ....
can you please help me to make a drill down in my report.
thnx and regards
UMAR NAYAB.hey thnx toronto..
im able to make drill in my report....
now my chart is not changing its data according to drill.....
like my bar chart should also change with the data drilled down....
please help regarding this....
regards. -
Hi
Can we have drill down in XL Reporter -Report Organizer
Regards
FarheenHi Rekha,
We can user drill down in XL reporter composer and excel . IN rerport composer when you drag a field to the selection criteria then you can drill down by transaction level.
But Report organiser is where all the reports are saved and give a look and feel like windows explorer.
What is your requirement. Post reporting related queries in the reporting forum
[Reporting and Printing;
Regards,
Rakesh N -
PIE Chart Drill down in bex report
Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.
Edited by: ramnaresh porana on Dec 1, 2008 6:35 AMHi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh. -
Error Message appears when drilling down from a report.
Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek -
JDeveloper 2.0: Drilling down into a class
I can't drill down into a class by double-clicking on an object
node in the Structure pane. The Content pane should display the
source code for the ancestor class of that particular object.
Thanks in advance!
nullHi
The doc for 'oracle.jdeveloper.servlet' can be found in the
JDeveloper Help System.
Launch the help system
and in the contents tab double click on 'JDeveloper 2.0 Reference
Documentation' book icon.
In the right hand frame select 'Oracle JBO Reference' link and
you can drill down further.
best regards
raghu
John Ritz (guest) wrote:
: Were can I find more detailed documentation for the classes in
: the 'oracle.*' packages? I'm specifically interested in how to
: use the classes in 'oracle.jdeveloper.servlet.*'
: and 'oracle.jdeveloper.html.*' packages. Some classes have a
: JavaDoc file but with little content, others have no
: documentation at all. Also Is the source code available for the
: classes in the oracle packages? Thanks for your help.
null -
Error WHen rying to Drill down in the Report
Hi ,
I am getting the below error when trying to Drill down on a characterstic in the Report.
"500 Internal Server Error"
BEx Web Application
Failed to process request; contact your system administrator
Information for Administrator
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RS_EXCEPTION (000): ORA-00904: "P0000"."CATTYPE_OT": invalid identifier
MSGV1: ORA-00904: "P0000"."CATTYPE_OT": invalid
MSGV2: identifierGood day,
Please check if Note 1327130 helps ...
Regards,
Karen -
Hi gurus,
This is regarding the drill down in the Tree report.
My scenario is,
i am doing a budget variance report which displays the report in tree format.
i have texts for different nodes in the tree, along with that i have a 10 feilds which i display using fieldcat in output along with nodes.
now i want to have the drill down to the 2 of the fields, where it has to go to some transaction.
i tried with hotspot in fieldcat definition but it is not working.
please can u tell me a solution as how can i do this drill down.
thanks in advance.
u will be rewarded heavily.Hi Vipin,
You can try with following example:
*& Report ZPRG *
&--INTERACTIVE ALV REPORT PROGRAM--
&This program displays order detais for a particular customer----
REPORT zprg .
--TYPE POOLS--
TYPE-POOLS slis.
--TABLES--
TABLES : kna1, vbak.
--DATA TYPES--
TYPES : BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln,
erdat TYPE vbak-erdat,
netwr TYPE vbak-netwr,
END OF ty_vbak.
TYPES : BEGIN OF ty_vbap,
posnr TYPE vbap-posnr,
arktx TYPE vbap-arktx,
werks TYPE vbap-werks,
END OF ty_vbap.
--WORK AREAS--
FOR FIRST PAGE *
DATA w_fcat TYPE slis_fieldcat_alv. "Used as Header for Field Catalog
DATA w_vbak TYPE ty_vbak. "Used as Header for Data Table
DATA w_events TYPE slis_alv_event. "Used as header for Events Table
DATA w_comments TYPE slis_listheader. "Used as Header for Comments Table
SECOND PAGE *
DATA w2_fcat TYPE slis_fieldcat_alv. "Used as Header for Field Catalog
DATA w2_vbap TYPE ty_vbap. "Used as Header for Data Table
DATA w2_events TYPE slis_alv_event. "Used as header for Events Table
DATA w2_comments TYPE slis_listheader."Used as Header for Comments Table
--INTERNAL TABLES--
FOR FIRST PAGE *
DATA t_fcat TYPE slis_t_fieldcat_alv. "Table for Field Catalog
DATA t_vbak TYPE ty_vbak OCCURS 1. "Data Table
DATA t_events TYPE slis_t_event. "Table for events
DATA t_comments TYPE slis_t_listheader. "Comments table
SECOND PAGE *
DATA t2_fcat TYPE slis_t_fieldcat_alv. "Table for Field Catalog
DATA t2_vbap TYPE ty_vbap OCCURS 1. "Data Table
DATA t2_events TYPE slis_t_event. "Table for events
DATA t2_comments TYPE slis_t_listheader. "Comments table
*****************VIPIN: START*****************************
DATA: V_REPID LIKE SY-REPID.
V_REPID = SY-REPID.
*****************VIPIN: END*******************************
--SELECTION SCREEN--
PARAMETERS p_custno TYPE kna1-kunnr.
--FILLING FIELD CATALOG--
FOR FIRST PAGE *
w_fcat-col_pos = 1.
w_fcat-fieldname = 'VBELN'.
w_fcat-seltext_m = 'ORDER NUMBER'.
APPEND w_fcat TO t_fcat.
w_fcat-col_pos = 2.
w_fcat-fieldname = 'ERDAT'.
w_fcat-seltext_m = 'ORDER DATE'.
APPEND w_fcat TO t_fcat.
w_fcat-col_pos = 3.
w_fcat-fieldname = 'NETWR'.
w_fcat-seltext_m = 'ORDER VALUE'.
APPEND w_fcat TO t_fcat.
SECOND PAGE *
w2_fcat-col_pos = 1.
w2_fcat-fieldname = 'POSNR'.
w2_fcat-seltext_m = 'ITEM NUMBER'.
APPEND w2_fcat TO t2_fcat.
w2_fcat-col_pos = 2.
w2_fcat-fieldname = 'ARKTX'.
w2_fcat-seltext_m = 'ITEM DESCRIPTION'.
APPEND w2_fcat TO t2_fcat.
w2_fcat-col_pos = 3.
w2_fcat-fieldname = 'WERKS'.
w2_fcat-seltext_m = 'PLANT'.
APPEND w2_fcat TO t2_fcat.
--FILLING DATA TABLE--
FOR FIRST PAGE *
SELECT vbeln
erdat
netwr
FROM vbak
INTO TABLE t_vbak
WHERE kunnr = p_custno.
SORT t_vbak BY vbeln.
SECOND PAGE *
DATA FOR 2ND PAGE IS FILLED IN THE SUBROUTINE HANDLING USER_COMMAND *
--FILLING EVENTS TABLE--
w_events-name = 'TOP_OF_PAGE'.
w_events-form = 'SUB1'.
APPEND w_events TO t_events.
w_events-name = 'USER_COMMAND'.
w_events-form = 'SUB2'.
APPEND w_events TO t_events.
--FILLING COMMENTS TABLE--
w_comments-typ = 'H'.
w_comments-info = 'CUSTOMER ORDER INFORMATION'.
APPEND w_comments TO t_comments.
w_comments-typ = 'S'.
w_comments-key = 'Sold To Party'.
w_comments-info = p_custno.
APPEND w_comments TO t_comments.
-----PASSING FIELD CATALOG AND THE DATA TABLE TO THE FUNCTION-----
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = t_fcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_vbak
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Subroutine for the Event TOP_OF_PAGE
FORM sub1 .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_comments
i_logo = 'COMPANY LOGO'
I_END_OF_LIST_GRID =
ENDFORM. " sub1
Subroutine for the Event USER_COMMAND
Here u_comm contains the function code of the selected function
and slis_field is a structure containing cursor information
FORM sub2 USING u_comm LIKE sy-ucomm rs_field TYPE slis_selfield.
CASE u_comm.
WHEN '&IC1'.
IF rs_field-fieldname = 'VBELN'.
SELECT posnr
arktx
werks
FROM vbap INTO TABLE t2_vbap WHERE vbeln = rs_field-value.
ENDIF.
ENDCASE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = t2_fcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t2_vbap.
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "sub2
Maybe you are looking for
-
Unable to create Java Fact in JDeveloper
I'm unable to create a Java Facts for all of the classes I need to in a JDeveloper project. When I create the java fact I can see that the classpath shows my projects .../target/classes/ directory. In the classes panel I can see all my classes. Howev
-
Changing ipod touch to a different user
My husband just got an Iphone and I got his Ipod touch. How do I reset it so the email and itunes will be in my name and not his?
-
I bought a device in NYC - how can I get a copy of the invoice?
Last April we bought an I-Pad mini in NYC - Grand Central Station and now I need to send it in for service as it does not power on. Somehow I cannot find the electronical invoice that was sent to me via email at the time, does anyone know if there is
-
Different GL for Transaction/Event Key FRL
Hi expert, I hv an issue for subcontract processing.. as defined in SAP the GL for Subcontract is : Dr. [FRL] External Service Fee Cr. [WRX] GR/IR Dr. [GBB-VBO] Inventory Cr. [BSV] SP components for refurbishment but at the other requirement, the GL
-
Under FireFOX 3.06.10 I have google toolbars on my Firefox Browser, to get to email easier, but with latest version, when I open google button in new window, Firefox closes all the the open tabs. These used to be independent, and anything done in a n