Drill-through via Transparent Partition

Hi
I am using Essbase Server and EIS 11.1.1. I have a ASO target cube which points to different ASO source cubes partitioned on dates. Each source cube has defined a drill-through report and this drill-through reports work fine if I access them directly from Excel add-in. But when I access these source cubes via my target cube (transparent partition) drill-through reports don't work (no visual effect on intersection cells). When I double click on them I cannot see my drill-through reports. Could anyone tell me what I am doing wrong here please? According to documentation, I should be able to drill-through via tranparent partioned target cube.
Regards
Chandra

Thank you for the reply but Essbase Studio does NOT support drill-through from Recursive Hierarchy dimensions. That's why I had to go back to EIS.
Edited by: user2695091 on 20-Feb-2009 17:30

Similar Messages

Is it possible to use FDM ERPI drill-through via Add-in Excel V11

Hi
I am using FDM ERPI 11.1.2.1 to load data from Oracle eBS GL (11.5) to Hyperion Planning 11.1.2.1.
The drill-through from Hyperion Planning to Oracle eBS GL via FDM ERPI is ok through Smartview and the data forms.
Do you know if it is ok through the Add-In Excel V11?
Thanks in advance for your help
Fanny

You cannot use the Classic Spreadsheet (Excel) Add-In if that is what you are referring to.
As the other post indicates it will only work via Smart View.
Thank you,
Todd Rebner

EIS Drill Through

Trying to get functionality to drill through essbase cubes that include a transparent partition.Part of main cube sources data from a second cube that has a drill through report to the source data created and functions. Is there a way to drill acroos the transparent partition to that same Drill through report?The two cubes have a different number of dimensions. Main cube has 2 more dimensions the second cube where the data actually resides.Does EIS and transparen partitions play together?

Hi, I am also facing few issues related to AIS: I am unable to use Drill Through (1) Smart View: It is asking for Connections and i am unable toprovide Shared Services Provider Information. It throws an error.In case i use URL as add feature then it asks for credential butstill no luck (2) Then i tried to used Add-In Excel and (This is my 1st time):When i double click on the data figure based on Intersaction leveli defined, it is taking me LRO's and now i don't know hoe toproceed further Can anybody help me?

Drill through from smartview to FDM gives HTTP 400 BAD Request

Hi All,
I've loaded data using FDM 11.1.1.3 to HPCM (Essbase)
I retrieved the data in Smartview and when moving my mouse over the cell i see the Drill through tekst balloon.
But when drilling through via Hyperion->Drill-Through-Reports it goes to the url :
http://<EAS SERVER>:13080/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
instead of
http://<FDMSERVER>/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
The first URL is in the Smartview settings but if i change that Smartview doesn't work anymore.
Has anyone a clue how to solve this?
Thanks in advance,
Marc

See Knowledge Document 967036.1 for a solution to this issue.

Drill-through from SmartView to FDM gives Navigation Canceled

Hi All,
I've loaded data using FDM 11.12.1 to Essbase (BSO)
I retrieved the data in Smartview and when moving my mouse over the cell i see the Drill through tekst balloon.
But when drilling through via Hyperion->Drill-Through-Reports it goes to the url :
http://<PROVIDER SERVER>:13080/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
instead of
http://<FDMSERVER>/HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
Im using IIS.
Cannot find where to change this.
Has anyone an idea to solve this?
Cheers,
Rafael

Is there something with ProxyPass or ProxyPassReverse?
ProxyPass/HyperionFDM http://<FDM SERVER>:80/HyperionFDM
ProxyPassReverse /HyperionFDM http://<FDM SERVER>:80/HyperionFDM
Thanks

How to increase number of rows displayed in Essbase drill-through report?

Hi
By default, the maximum number of rows per Essbase drill-through report (via Integration Services) is set to 1000. Could anyone tell me how to change this limit please?
Regards
Chandra

Is this for an EIS drill through report that drills through to get RDBMS data, using spreadsheet add-in for example? If so check and see if "Maximum rows per query" in EIS is currently set at 1000 and try to increase it. (I don't recall hitting a 1000 limit in the past, perhaps your report is set at that? or if this is through Web Analysis maybe WA is governing it)
To set/change a query governor in EIS:
1     In the Drill-Through Reports dialog box, select a report name.
2     Click Edit to open the Report properties dialog box.
3     In the Report properties dialog box, select the Governors tab.
4     In the Maximum time per query (in seconds) text box, enter the maximum query time.
For example, to stop a query that takes longer than 100 seconds, type 100.
5     In the Maximum rows per query text box, enter the maximum number of rows to retrieve.
For example, to stop a query that retrieves more than 200 rows, type 200.
6     Click OK.

Drill Through in Analyzer 5.0.3 Web Client

I have an EIS created Essbase cube with drill through reports. I can access the reports using the Excel add-in and via the Analyzer Windows client and they work as expected. In the Analyzer Web client, I see the LRO indicator, but when I click on the cell I get "Cell ___ cannot be drilled on". Does the Web client support drill through, and is there additional configuration necessary to make it work?Thanks,Jim Burnham

I didn't have the Essbase setting of "Use Grid API" turned on for the user I was testing with.Jim

Format Dimensions in Resulting Drill Across Spreadsheet, Linked Partition

Hello,
Does anyone know if / how I can format the order of the dimensions that appear in the Source of a linked partition, when drilling across from Target to Source in the essbase excel add-in? I am in version 9.3.1, using a linked partition going from aggregate storage to aggregate storage.
An example: I have Cube "A" at the intersection where I can use my linked partition to drill across to Cube "B". When I do so, the drill works as expected. However I would like to specify an order for the dimensions of Cube "B" to show up in, in the new excel worksheet. Right now I can't determine the default order that is appearing, (it is not largest dense or largest sparse first). The order is consistently the same though, regardless of the format of the intersection of Cube A when I initiate the drill across.
I want to specify an order mostly because I want to try to automatically drill to generation 2 on a dimension in Cube B that is not in Cube A. I haven't been able to do this with the Area and Mapping defintions in the partition yet. (Maybe that is my best bet) I'm hoping there is a config file or something that I can use to manipulate how the new worksheet appears.
Can't find anything in the documentation yet.
Any thoughts would be appreciated.
Thanks,
Carmen

user616766 wrote:
Does anyone know if / how I can format the order of the dimensions that appear in the Source of a linked partition, when drilling across from Target to Source in the essbase excel add-in? I am in version 9.3.1, using a linked partition going from aggregate storage to aggregate storage.I don't believe you can control the order/etc of the dimensions in the linked partition drill-through. I just took a look at both the Java API code for the IEssLinkedPartition class and I didn't see any methods/properties that give you any information about the orientation of the members (or even any mention of the members at the datapoint).
I want to specify an order mostly because I want to try to automatically drill to generation 2 on a dimension in Cube B that is not in Cube A. I haven't been able to do this with the Area and Mapping defintions in the partition yet. (Maybe that is my best bet) I'm hoping there is a config file or something that I can use to manipulate how the new worksheet appears.The second problem you will have is automatically drilling to generation 2. The classic add-in gives you no notifications, or 'events', to tell you something has happened.
Both of these issues are trivial to solve in our Dodeca product. Our 'intelligent navigation' feature allows you to navigate from a datapoint to a new view/report and will automatically package the members represented at the datapoint as a tokens that represent the point of view. The target view/report, which you can layout with the dimensionality located whereever you wish and can connect automatically to your 'linked partition' drill-through database, then places those tokens in the location you indicate when the view/report opens. As a bonus, you do not need to specify a linked partition to have this drill-through behavior. Finally, there is robust event support so you can have the zoom-in occur automatically. You can learn more about Dodeca at our website, www.appliedolap.com.
Tim Tow
Applied OLAP, Inc

Syntax error Creating Transparent Partition in MaxL

Hello,
I'm trying to create a simple transparent partition (no mapping needed, just using all the 3 dimensions and descendants in the source database to the target database. I'm getting a syntax error, I went through the MaxL naming conventions and also tried a couple of diffferent things but to no avail. Please help as to what the error might be:
My code is as below. The error I get is: Getting a syntax error near '@IDESCENDANTS("Accounts"), @IDESCENDANTS("Products"),@IDESCENDANTS("Market)
Code:
create transparent partition student8.coke area '@IDESCENDANTS("Accounts"), @IDESCENDANTS("Products"),@IDESCENDANTS("Market")' sourceArea to student8.cokepart at lab01 as essadmin identified by 'password' area '@IDESCENDANTS("Accounts"), @IDESCENDANTS(Products), @IDESCENDANTS("Market")' targetArea;

Nobody replied to this, but actually the error was the double quotes on Accounts, Products and Market.

Using AGG/CALC DIM function in the BSO target cube of Transparent Partition

Hi,
Is it possible to use AGG("dimension") on a dimnesion in the BSO cube that is a target cube for a BSO-BSO Transparent Partition/
I have created the partition area with 3 dimensions, one being 'Source'. 90% of the source members are being refrenced from source to target via that transparent partition. But I still have the 10% Source members in the target cube that need to roll up to the 'Source"(along with the 90%) for correct aggregation.
When I try to use AGG("Source") in a FIX statement that's within the partition area, I get the following error:
Error: 1042013 Network error [10054]: Cannot Receive Data
Error: 1042012 Network error [10054]: Cannot Send Data
Can I not aggregate the dimension in the Target cube?
Thanks

Hi,
We have the same problem.
I try to create transparent pertition between BSO (as a source) and ASO (target) and have the same warning message.
Just to eliminate possible effect of outline complexity I created very simple DBs with the following outlines:
__For ASO:__
mes1
mes2
Measures
prd1
prd2
Products
Actual
Adjustment
Scenarios
__For BSO:__
mes1
mes2
Measures
prd1
prd2
Products
Adjustment
Scenarios
In addition to the message I have the following behavior - ASO has data in "Actual" scenario, BSO has data in "Adjustment" scenario. Before partition definition I can see the data in the right places, but when the partition created, Actual data disapeared from report of ASO. It is still in the database, and when the partition removed - appears again.
Any ideas?
Thank you in advance,
Alexey

Essbase Studio - SmartView - Drill Through Error

Hello!
I'm creating a drill through report using Essbase Studio 11.1.1.2. Built the Context, the Report Content and Associations. Perform an ad-hoc analysis via SmartView. Perform a Hyperion | Drill Through Reports and the follow error occurs:
Unable to list Essbase Studio Drill Through Reports : Error in the statement interpret. Line = 1109
Anyone know what causes this and how to resolve it?
Thanks,
Bob

The issue was due to using transformations to prefix characters to ids. The drill through couldn't resolve the cube member name to the data in the tables.
For example, if your source data for your accounts table has an member id of 1, 2, 3 etc. But you use a prefix of A in transformation to build the member in Essbase (A1, A2, A3, etc.), drill through can't resolve it. Drill through is going back to the table and searching for A1, A2 or A3. The table has 1, 2, or 3. A string is not a number, that's the error that basically occurs.
Solution - I updated my tables to have the prefixes (and data types) and removed the transformations. That way when drilling, the Essbase member matches up with the table id.
Thanks,
Bob

Drill Through Parameters

Hello,
Our organization would like to take advantage of the Drill Through functionality that is built into BPC for NetWeaver 7.5. In both the How To Guide and several blog/forum posts, the examples shown for the parameterized URL call state that the values passed as parameters must be at the base level of the dimension. This is an unrealistic expectation for our business case.
We have a custom Drill Through developed for our implementation of BPC for Microsoft 7.0. The report we execute the Drill Through from is a financial cost report. Rows(Account) and columns(Time) are rarely displayed at the base value-level. In addition we have EvDRE filters for Company, Profit Center, and Cost Center that are usually set at the "All" level (but not always). Business users drill through a specific cell to see all detail transaction data corresponding to the cell value.
In order to "explode" each dimension, we developed custom user-defined functions in SQL Server. A dimension value is passed to the function, the function "explodes" through the dimension and returns a list of all base level values related to the passed value. The tables returned from each function (account, time, company, cost center, profit center) are then used to filter transaction detail via a SQL Server stored procedure.
It must be possible to develop this same sort of "dimension explosion" logic within the BPC for NetWeaver 7.5 environment. The question is how can it be accomplished? We've come up with some possible alternatives:
1) Develop a transaction which can be accessed through the ITS. The transaction would read the BPC dimensions as stored in the BW, perform the "dimension explosion" logic, then pass the value lists for each dimension as filters to a custom ABAP report or Bex Query,
2) Develop logic in .ASPX/C# to execute a Microsoft SSIS package that pulls data from the dimensions using the SAP BI connection manager. The resulting value lists are then passed to a parameterized WebI or Crystal Report.
3) Develop a custom menu selection, calling macro logic created within our cost report. The macro logic would perform the "dimension explosion" logic, then somehow store the resulting value lists so they can be consumed by the drill through executed via a call to mnu_ETOOLS_DRILLTHOUGH_RUN.
We're not sure how feasible each of these alternatives are, and hope some of you out there can share your thoughts.
Any other ideas would be greatly appreciated. Thanks in advance for your help!
Wendell Giedeman

Wendell,
It seems that you've thought this through pretty thoroughly!
One other option to consider would be regularly synchronizing BPC and BW versions of your hierarchy, and then doing a lookup on the BW side without directly referencing the BPC dimension data. Yet another option would be loading your detailed data into BPC and then doing the "explosion" by using EVHOT to jump to a report on the detailed application.
Ethan

Essbase Studio & Drill-through

Hello All,
Can I still create a drill-through report in Essbase Studio & update a previously built [by EPMA] Essbase cube? Please consider this urgent...
Thanks,
Cheryl

Cheryl,
One of the draw backs right now of using EPMA to load Essbase cubes is that any changes that are made to your Essbase cube in EAS, etc. post a EPMA Essbase Cube deployment will be overwritten and vice-versa. EPMA is best for working with HFM and Planning right now and is not best suited for Essbase deployment right now even though it can handle simple Essbase cube deployment. If you cannot do what you need with EPMA alone then you will need to deploy using Essbase Studio, EIS, or EAS.
However, other options would be to utilize partitioning or something similar to get the drill-through capability from another "Reporting" cube. That would be the immediate solution I believe.
http://www.artofbi.com
Edited by: Christian Screen on Nov 17, 2009 9:10 AM
Edited by: Christian Screen on Nov 25, 2009 12:30 PM

Drill down via the legend icons

Hi,
I created a line chart. Via navigate it's possible to drill down to a another report. Is it also possible to drill down via the legend icons?
Thanks, Robbert

hi,
For this u can add one custom graph for the legends and enable the drill down on that legend
please go through this thread
refer obiee Guru John's reply
Re: How to show only legend in graph?
thanks,
saichand

Drill down via legend

Hi,
I created a line chart. Via navigate it's possible to drill down to a another report. Is it also possible to drill down via the legend icons?
Thanks, Robbert

hi,
For this u can add one custom graph for the legends and enable the drill down on that legend
please go through this thread
refer obiee Guru John's reply
Re: How to show only legend in graph?
thanks,
saichand

Drill-through via Transparent Partition

Similar Messages

Maybe you are looking for