DrillDown and field order

Hello,
I have a dimension with several levels each one with a code field and a description field.
When I drill from an high level to a lower one the bi give me the descritpion before the code... is there a way to tell in which order drill down fields?
Thanks to anyone who tries help me
example
DIMENSION:
--Lv1
cod lv1
desc lv1
----Lv2
cod lv2
desc lv2
1)REPORT with DRILLDOWN (start)
COD LV1 , DESC LV1
2)REPORT with DRILLDOWN (after drill on desc lv1 (cod lv1 interaction has been disabled))
COD LV1 , DESC LV1 + --> DESC LV2,COD LV2

Thank you all for your answers!
UserMB, so we have the same problem... in some reports I achieved the wanted result but I don't understand how...
In these reports I always get codes before description when drilling... but the reports are equal to the others ... and also the dimensions in the repository are built in the same way.
Perhaps we can try to compare our dimension:
In each level of my dimension I have 2 keys:
-a key for each level using the code (a key without drilldown option)
-a key for the drilldown that includes code and description to get both field drilling.
have you done the same?

Similar Messages

Motion and Field Order Stupidness

I'll try not to rant too much.
But what is up with Motion and working with DV NTSC video with fields? I have had nothing but headaches. I am a long time After Effects user, and I was glad to get Motion 2 (2.1.2), but I've just spent the last hour and half trying to get it to render DV NTSC video correctly without it getting field jitter on a project that needed to be over-nighted to go on the air. And it still doesn't look totally correct. (I'm not a happy camper)
Here's the deal, I took DV captured footage from FCP using the standard DV/DVCPRO - NTSC preset I've used forever. That footage was imported into a Motion project that was using its own NTSC DV project preset (all lower fields -even). But every time I'd play it back in Motion, or render it out (still using the NTSC DV render preset), I get serious field jitter on DV output.
Eventually I found under the Inspector-Media tabs that the footage was imported as Field Order- None (why I have not a clue). So I changed all the footage to Lower (even). That worked on any footage where size, rotation, or position was not changed. If any of those attributes was changed I get the field order jitter. It seems to me that Motion is not able to render out field ordered video properly and the quality looks poor or jittery.
Now that might seem hasty to say that, but I've been doing the same thing in AE for years, never having to change the imported field order to get it to look right and I have always captured, imported, work with projects and rendered using the QT DV/DVCPRO - NTSC presets.
Can someone help me because I can not believe I've had to change so many setting to try to get video to look right from Motion while using the same settings during the entire workflow.
Thanks, and sorry for the rant.
PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4 Mac OS X (10.4.7)

Hey, thanks for the replys.
[....you might want to try using the animation codec..millions of colors...]
I gave that a shot this morning, and I'm having the same problem. See what's going on now is after changing the Field Order to even for the footage media, all of it looks decent except for the ones on an angle, croped or resized and I see this in both Motion's preview and the final render when I play it back in FCP. So as per your suggestion I rendered with the animation codec (filed rendering) and it still has it. Its just odd to me that it does that, like I said before I've worked in the DV/DVCPRO - NTSC codec with FCP and AE for years with no quality degrade. The reason I have always do that is that's what I capture to and that what my FCP project is so to keep it all consistant. BTW, this is going network and cable, no different than I usually do.
[...are you enabling field rendering in the Canvas or in the export settings?]
Yes I am, sorry, I should have pointed that out. I have done combinations of different QT codecs with and without field rendering turned on to see different results. None of course resolves this issue.
Thanks
PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4 Mac OS X (10.4.7)

Combination HD/SD and field order

Hello all -
I have a program which combines 1080i60 and 480i video in a 1080i60 timeline. The 1080i footage was captured through a Kona LHe, upconverted from 720p30 and 480i DVCAM by the JVC deck. The SD footage was captured as uncompressed SD from Beta SP using the same Kona.
My question has to do with managing the field order for encoding to SD mepg for DVD.
When I send the sequence to compressor, the mpeg preset defaults to upper field dominance (top first). I am used to specifying SD encodes as bottom first, but left it set that way for my first test, figuring this would correspopnd to the field order oof the source. What I seem to be seeing is that only the SD clips are winding up with reversed fields. I could be wrong, and I need to check it a little more carefully, since a lot of the footage originated as progressive anyway.
However, my question is, if in fact it is only these clips, which is the best way to address this:
- change the field dominance of the SD master clips in FCP?
- apply a field reversal filter to the clips in the sequence?
- de-interlace the clips in the sequence?
- change the field dominance in my Compressor preset?
I'd be interested to find out more about how the field dominance is managed by FCP when upconverting, downconverting, and combining formats is handled when capturing, editing, and exporting. Any suggestions would be appreciated.
Thanks -
Max Average

Upon further inspection (viewing the DVD on a CRT) it looks like the fields are ok after all.I wa seeing the fields in simulator, which is normal, but the field order looks correct on the final disc.
I am noticing one very strange effect on a clip that has been slowed down, however, where the fields seem to be getting interpreted in the wrong order, resulting in a back-and-forth motion. Again thie clip is interlaced SD in an HD sequence.

HDV, ProRe, and field order

Hi all.
I'm having a field order issue. I have many Quicktime movies in HDV 1080i60. I am trying to convert these to ProRes LT for editing, and then encode the result with a compressor preset for DVD.
If I use the ProRes LT for interlaced material preset, everything seems fine until I encode that to mpeg2. Compressor detects the ProRes file as interlaced, and I have frame controls off for the mpeg conversion. But the field order appears wrong upon viewing; it appears right if I change the native field dominance to "progressive" before encoding to mpeg2.
So can anyone tell me why the ProRes behaves as if it is always progressive? I can't figure out what is missing.
Thanks.
Jeremy

Hi all.
I'm having a field order issue. I have many Quicktime movies in HDV 1080i60. I am trying to convert these to ProRes LT for editing, and then encode the result with a compressor preset for DVD.
If I use the ProRes LT for interlaced material preset, everything seems fine until I encode that to mpeg2. Compressor detects the ProRes file as interlaced, and I have frame controls off for the mpeg conversion. But the field order appears wrong upon viewing; it appears right if I change the native field dominance to "progressive" before encoding to mpeg2.
So can anyone tell me why the ProRes behaves as if it is always progressive? I can't figure out what is missing.
Thanks.
Jeremy

Test Presentment and Field Order

Okay, I think I've found my problem.
I'm developing my first form ever with Adobe Output Designer. And I'm using the Test Presentment option to see where all the fields are on the form.
However, it appears that the fields are displaying in sequential order, regardless of where I position them on the form. So, in example, if I make three subforms, and I use a dat file for the test presentment, but the 1nd subform has the field that appears second in the dat file. The 2nd subform has a field that appears first in the dat file, and the 3rd subform has a field that appears 3rd in the subform...
The Test Presentment comes out displaying:
Second Subform
First Subform
Third Subform
Even though the order of the subforms, and the child/parent relationships, are correct on the form themselves.
So, in the Test Presentment, how can I force it to display them delimited, instead of sequential?
Thanks.

I've never used sub-forms so I've not experienced this phenomenon but I'm not surprised it occurs. The print agent (and test presentment) wants to match up the fields with the forms so it produces the forms in the order that the fields are found. I
i think
that the solution would be to make the fields
b global.
In addition to setting the global characteristic for the fields on the form, the dat file would have
b ^global
instead of
b ^field.
Just for the purpose of seeing the field positions, it might work to let Designer build the dat file. At least you discovered this phenomenon early.
We use global fields almost exclusively. That allows our application that builds the dat file to define all the fields in the dat file followed by all the forms to be printed (we usually print "packets" containing several different forms and not just a single form). The alternative would be to define a form followed by the fields followed by another form and then some more fields yadda, yadda, yadda. With global fields the application doesn't need to be aware of which form references specific fields. It allows our application to present a "verification screen" to the user with just some pertinant data elements instead of all of the individual forms in their entirity (much faster).
Global fields are placed in a "dictionary" by the print agent and any form in the dat file can reference them. In addition to the advantage mentioned above this allows for the field to be defined in the dat file just once even though it may be used on several of the forms that are to be printed.

Sony Z1U and field ordering

Hi,
We have a project that have Sony HDV 60i footage.
We tried to convert HDV 60i (upper field) to normal SD 720X480 lower field first.
We droppd the HDV footage in a 720X480 lower field first timeline.
It works, but FCP adds a filter to each clip "shift fields".
but even then, we see some artifacts.
What should we do to have crisp image ?
thanks

Ouch. OK, what about just bringing all the footage into Compressor and Exporting as DV NTSC Anamorphic? For a short period of time, you would need twice the HDD space that the media currently occupies, but then you could delete the original HDV material or with the cost of hard drives now a days, you could just buy another to place the HDV material onto for a backup.
Good luck,
-Brian

Re field order in INNER JOIN

Hi,
I need a suggestion for improvement of my inner JOIN statement.
internal table itab is of below type
type: begin of ty_itab
 field a
 field b
 field c
 field d
 end of ty_itab
I have to join two database table TABLE1 and TABLE2. Fields a and d are from TABLE2 and fields b and c are from TABLE 1.
But in the internal table I must have the fields in the order fielda,b,c,d.
Which of the below two options will be better for performance ? And why ?
option 1:
SELECT tab2~a
 tab1~b
 tab1~c
 tab2~d into corresponding fields of itab from TABLE1 as tab1 and TABLE2 as tab2 on..........
option2:
SELECT tab1~b
 tab1~c
 tab2~a
 tab2~d into corresponding fields of itab from TABLE1 as tab1 and TABLE2 as tab2 on..........
Thanks in advance...
Best Regards
Ananya Mukherjee
Moderator message - Cross post locked
Edited by: Rob Burbank on May 28, 2009 9:43 AM

I am not satisfied with your two options. Because of following reason,
1. First I want to know which one is master table and item table. Because in inner join select query you want to use master table as first and you want to use the item table as second.
Example:
SELECT TAB2A TAB1B TAB1C TAB2D
 INTO TABLE ITAB
 FROM <MASTER TABLE1> AS TAB1 INNER JOIN <ITEM TABLE2> AS TAB2 ON..........
2. You should not use the INTO CORRESPONDING FIELDS OF ITAB. Instead of this you can change the field order in internal table or in select query.
Example:
Use following way
TYPE: BEGIN OF TY_ITAB
 FIELD A
 FIELD B
 FIELD C
 FIELD D
 END OF TY_ITAB
SELECT TAB2A TAB1B TAB1C TAB2D
 INTO TABLE ITAB
 FROM <MASTER TABLE1> AS TAB1 INNER JOIN <ITEM TABLE2> AS TAB2 ON..........
Or , Anyway you are going to use in program only. It will not affect your logic if change the field order in the internal table.
TYPE: BEGIN OF TY_ITAB
 FIELD B
 FIELD C
 FIELD A
 FIELD D
 END OF TY_ITAB
SELECT TAB1B TAB1C TAB2A TAB2D
 INTO TABLE ITAB
 FROM <MASTER TABLE1> AS TAB1 INNER JOIN <ITEM TABLE2> AS TAB2 ON..........
3. In inner join query, the order of Where condition also create the perform issue. Because in where condition maximum you try to use all the primary key from <MASTER TABLE1> and <ITEM TABLE2> and field order in where condition should be same order in <MASTER TABLE1> and <ITEM TABLE>.
This are the things you want to take care when you try to use INNER JOIN Query. If you have any clarification please let me know. I will try answer your Questions.
Ravi.
Edited by: RavivarmanP on May 28, 2009 6:55 PM

Sale Order Item Level Text Field which table and field

Hi,
Thanks for your prompt reply and best solution.
Can you please tell me one more thing, in sale order at item level the TEXT Field maintaining by user at transaction level now they want that field in one of the report, so can you please tell what is the table and field where i will get this sale order item level text details.

Hello,
is this going to work for item level text as well.
can you tell how to proceed with this functional module
or is there any other thing required.Please elaborate to
understand better way.
You can check out two table in respect to Sales TEXT i.e. STXH (STXD SAPscript text file header) and STXL(SAPscript text file lines).
The best approach of tracing out the Text in respect to Sales Order would be to use the Function module READ_TEXT and put this FM in SE37 and execute with the following parameter.
Client
Text ID of text to be read
Language of text to be read
Name of text to be read
Object of text to be read
Archive handle
Text catalog local
When you are essentially looking to read item level Text with respect to Sales Order then your Text OBject would be VBBP.
Regards,
Sarthak

Sales order item level partial delivery field table and field?

Will anyone share your expertise, In SD sales order level, at item what is the table and field name in which the partial delivery status is stored. I want the table and field name?. will anyone share pl.

Hi,
Try with table VBUP - and field LFSTA.
Regards

How to add tab and field in purchase order

hi friends,
I have to make changes in the purchase order. i have to add tab and a field in that.
i know that badi ME_GUI_PO_CUST have to used this.
can anyone send me the code or documenation fot add a tab and field using this badi or suggest me how to do this.
if code or documenation is not available then send me the steps if possible.
my mail id is [email protected]
[email protected]
hitesh kumar

Hi,
1. Double-click on your implementation class
2. Click on Attributes tab
3. Add attribute SUBSCREEN1 with level Constant, visibility Public, type MEPO_NAME, initial value 'HDRSCREEN1'.
please go thourhg the below link .... in this the steps are there and the some of the standard Enchancements also there.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
See this treads :
ME_PROCESS_PO_CUST header n item connection
Re: BADI IF_EX_ME_PROCESS_PO_CUST~PROCESS_SCHEDULE
Reward points
Regards

Contract and release order for service: connection and field selection

Hi Experts,
I have some questions about contract and release order (PO against contarct) for services.
A -I want ot know if there is any standar way to oblige the creation of a release order to a contract. I mean i had some users that create a release order w/o reference to the contract and it works fine anyway. The document is a copy of the NB. I cant find the way to reference the 2 purchase document clearly.
B - Using a release order, when copying the item from contract catalogue by clicking the service selection icon, description and net price are correctly copied: the description is not modifiable but the net price can be change by the user. Can some body explain me where to modify this setting? where is the field selection and where in SPRO step by step please,
thanks in advance
Livio

... Nobody is so nice to suggest me any solution?
For the point A probably the only way is user-exit.... but for B i don't have any idea, please let me know
thanks
Livio

VKM1 Status and Purchase Order Fields

Hi Everyone,
I'm new with SD and not familiar with transaction VKM1. I have a task that needs to get the corresponding Status field and Purchase Order field for a corresponding VBELN. To what table can I map these data?
Please help.
Many Thanks!

Hi
Kindly use the belwo tables and fields
VBAK--BSTKD --POurchase order
VBUP-GBSTAOverall processing status of the SD document item
Regards
Damu

Add customer fields in Shopping cart and purchase order

Hi,
I have to add fields(moder of transport, country origin, country destination and more) in Shopping cart and purchase order in SRM system and remotle i have to update the same data in R/3 System.
could you please guide how to add the fields in screen.
regards
Shakeer

Hi
We have done this type of requirement several times in our previous SRM Implementations.
You need to create an Append Structure in the Standard Structure to create the custom fields in your case.
Refer this link below for details.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
Define the fields of the append structure. You can proceed as when creating a normal structure with two restrictions (see Creating Structures).
The fields of an append structure must lie in the customer namespace, that is the field names must begin with ZZ or YY. This prevents conflicts with fields inserted in the table by SAP.
http://help.sap.com/saphelp_srm50/helpdata/en/5b/c9df3b6ac34b44e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/28/857a1867b52e4f8472c5d49209a675/frameset.htm
BBP_CUF_BADI_2 BADI will be used to control the properties (hide/unhide, input/output enable or disable) for those customer fields you created in the above append structures.
BBP_DOC_CHANGE_BADI for defaulting or modifying the customer field contents, incase required.
BBP_DOC_CHECK_BADI for issuing customer messages for the customer field contents (incase data is entered incorrectly) , incase required.
Let me know incase you face any issues.
Regards
- Atul

What do I need to know about field order and HDV?

I keep seeing field order options in FCP and DVDSP and Compressor etc.
Can anyone point me to any resources that will help me understand things a little better?
I'm editing HDV in FCS.
Thanks
Miller.

Field dominance (actually field order) is a function of how video is recorded.
Each frame of interlaced video is made up of two fields. They are recorded in sequence. At NTSC std video (~30fps) the frames are recorded 1/60th of a second apart.
We will call the first field recorded: #1 and the second field: #2.
To play back correctly you need to play the fields in the order they were recorded
if done correctly it would look like this
1-2 1-2 1-2
if the fields are reversed (by using the wrong field order setting) you would get
2-1 2-1 2-1
This yields a jerky, strobe like playback as the fields are being played not in the order they were recorded.
HDV records the Upper field first in each frame and so is termed Upper Dominant
DV record the Lower field first in each frame and is termed Lower Dominant
Questions? There will be a quiz on Monday. And NO, it is not open book.
Cheers,
x

Field order on cards (and iPhone)

Each time Address Book is open, the custom fields appear in a different order on the card. This is a new bug with Snow Leopard.
Actually, I keep my database in FileMaker, and then weekly export to file / import in Address Book in order to sync with my iPhone. Starting with Snow Leopard, the only way I'm able to get the fields to appear properly at all in Address Book is to delete all contacts, create a card template with everything proper, then import the tab-delimited file.
The random order of fields has been a headache with the iPhone since day 1. The user should be able to create a (permanent) template of the fields and their order in both Address Book and iPhone, rather than what happens now.

randomkoreandude,
Great question! If your device is not fully paid off with Edge you will not be able to trade in the device for the iPhone 6. You can Edge up to the iPhone 6 if you are still under and Edge contract if it has been 30 days since the contract was started and 60% of the device is paid off. If you device is currently fully paid off under the Edge agreement you can trade in the device to get the gift card.
LindseyT_VZW
Follow us on Twitter @VZWSupport

DrillDown and field order

Similar Messages

Maybe you are looking for