Drilling via Hierarchy - how to display upper levels of the hierarchy??

Hi all.
I'm using Discoverer 10.1.2
I have a worksheet which contains only one Pie graph.
Users can drill down and up by clicking on the slices of the graph, because I definied Hierarchy in the Administrator.
Everything's fine, but when drilling down you can't see through which values of upper levels of the hierarchy you go..
For example assume the pie graph displaying three slices for warehouses 1,2 and 3.
User clicks on slice 2. Discovere re-run query with new condition warehouse=2 and displays new pie graph which shows four slices for Items a,b,c and d.
That's fine user can see there are four items on the selected warehouse and there is some amount of each of these items.
But he can't see which warehouse was selected!!!
Discoverer only adds new condition to the source sql query but I have no chance to display these conditions on worksheet.
Discoverer Plus enables to add "Axis Items", "Data points",etc in the graph title.
In the Legend of the Graph there is a Column name of the upper level of the hierarchy but not its value (in my example there would be Legend displaying slice colors for items a,b,c,d and link to "warehouse") I would Like to see current warehouse number (e.g. 2 in above example) too!!
Any workaround???
Thanks a lot.
Jakub

Hi Jakub
In releases prior to 10.1.2 users really had no choice but to drill to detail. However, with the release of hyper drills in 10.1.2 the situation has changed. Most of my customers now use hyper drills and wondered how they ever got by without them. Using hyper linked workbooks allows you to create a library of workbooks that all interlink to each other, up and down the chain.
Thus a user can jump into the chain anywhere they like and the system should let them link up or link down. When done properly you end up with a library. Now take this one step further and make the library owner a generic user called something like ACCOUNTS PAYABLE. You can now have a library of accounts payable workbooks, workbooks that have been shared with either the ACCOUNTS_PAYABLE role or responsibility.
Does this help see the direction I take?
Regards
Michael

Similar Messages

Displaying different levels of the same hierarchy in the different columns

I have a parent child hierarchy and wish to display different levels of the hierarchy in different columns of the resultset eg
level 1 level 2
Europe UK
Europe France
N America US
N America Canada
However writing MDX like the below
select
{} on 0,
([Geo].[level 1],[Geo].Level 2] on 1
from cube
results in the error "The [Geo] hierarchy is used more than once in the crossjoin
How can I get around this??

Hi,
You can make use of CrossJoin function in MDX, I give a sample MDX based on the AdventureWorks database:
select {[Measures].[Reseller Sales Amount]} on 0,
crossjoin({[Sales Territory].[Sales Territory Group].[Sales Territory Group].members},{[Sales Territory].[Sales Territory Country].[Sales Territory Country].members}) on 1
from [Adventure Works]
After execut the MDX you will get the result like this:
Reseller Sales Amount
Europe
France
$4,607,537.94
Europe
Germany
$1,983,988.04
Europe
United Kingdom
$4,279,008.83
NA
NA
(null)
North America
Canada
$14,377,925.60
North America
United States
$53,607,801.21
Pacific
Australia
$1,594,335.38
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Display the technical name of the last level of the hierarchy

Hello,
I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
Please Advice,
David

David,
Check the below possibilities.
1. You can do that in a workbook.
2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also.

How to add Navigation Level to the Portal?

Hi All,
How to add Navigation Level to the Portal?
for example:
1st Level is the Role
2nd Level is Worksets/Folders
I want that the 3rd Level will contain more Worksets/Folders and will be under the 2nd level and not in the "Detailed Navigation".
I tried to change the "Number of display levels" in the framework page but it didn't help.
Attached a picture with the required result (of course, for my roles)
http://img457.imageshack.us/my.php?image=toplevelnavigation7xy.jpg
Thanks, Omri

Hi Omri,
in fact, almost one year ago we did something similar on a project basis, but as already stated here, this was done by modification. What we did was providing a dropdown box within the masthead, containing the first level, and the second and third level now have been displayed where normally the first and second level are. That was a ten days solutions, some very fine granulated work. But nice
Anyhow, nowadays this can be more easy using the LightFrameworkPage (if that's OK for your purpose) and the Navigation Tag Library, see http://help.sap.com/saphelp_nw04/helpdata/en/42/f35146a7203255e10000000a1553f7/frameset.htm for details.
Hope it helps
Detlev

How to display data elements in the tempalte header

Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AM

Hi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply

How to display link content on the the same sharepoint page on click event

"How to display link content on the the same sharepoint page on click event"
Detail:
we are using a document library where all html files are stored/uploaded. we would like to display/open the html file on the same sharepoint page where all the files are listed.
Thanks.

Use jQuery and set the target to self to the anchor tag
Regards,
Sairam Avacorp Technologies

C How to Set Isolation Level in the Connection String

How to Set Isolation Level in the Connection String using the "Microsoft OLE DB Provider for DB2 Version 4.0"?
We are trying to move from Crystal Reporting that run against a IBM DB2 database on a mainfram to SSRS reporting and we have downloaded the "Microsoft OLE DB Provider for DB2 Version 4.0" and then worked with the DB2 Administrator to create the
Packages. We only have access to use the "Read Uncommitted ("MSUR001") package. We were able to connect and pull data before he removed access to the other packages, but after setting access the Connection keeps trying to use
the 'Cursor Stability (MSCS001)" package. How do we change the Default to the "Read Uncommitted ("MSUR001") package??? Since it is keeps defaulting to the the other package
we can't connect to do it in the T-SQL query, it has to be set at the Connection String level.

Hi Dannyboy1263,
According to your description, you want to set the Transaction Isolation Level in Connection String. Right?
In Reporting Services, the Connection String for OLE DB Connection can only contains Provider, Data Source and Initial Catalog. There's no property for setting Transaction Isolation Level in the Connection String. Based on my knowledge, we can
only set the Transaction Isolation Level at Query level or set it by using code (C#, VB, Java...) to call the property of Connection. So unfortunately your requirement can't be achieved currently.
Reference:
OLE DB Connection Type (SSRS)
Data Connections, Data Sources, and Connection Strings in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

Adobe Connect: how to display a picture in the WebCam pod when not sharing video

The WebCam pod can pause a live video showing a static image. However, I believe that you are looking to use a Share pod, where you can upload a JPG or PNG image. Just place the share pod with the image where you would have the Camera pod.

How to display 3 level hierarchy alv report using SALV

Hi ,
      I need to display a Hierarchy ALV report with 3 level.I thought of trying CL_SALV_HIERSEQ_TABLE but i am able to display only two level report.
      How can i display the 3 - level heirarchy report using SALV. I don't want to use SALV_TREE.
      Regards,
      Aditya Tanguturi.

Hi Aditya,
Please check this thread
Is it possible to display more than 2 levels us... | SCN
Thanks !
Amit

Display different level for same hierarchy value in BO 4.0

Hi Expert,
I have one question for Webi for BO 4.0
We have one hierarchy in BW side and we hope to display differet level in same report for different column
For example, column A is for level 6. column B is for level 7.
Do you know how to releaze this in Webi side?
In the 3.X version, we have different dimension for different level.
But now in BO 4, it has been combined into one\
Thanks and best regards
Alex yang

Hi,
You can still do this in BI 4.0, if you use the old 'legacy' MDX OLAP.unv from Universe Designer tool .
Yes, with the BICS connection, you are getting a native hierarchy, as it would be displayed in an OLAP environment.
Cheers,
H

How do I come back to the Hierarchy List Display screen?

Hi Gurus,
I have designed a report (Hierarchy Sequential List Display).
I would select a few records from the resulting report (by clicking on checkboxes that i've provided in the report) and perform an event which inturn executes BDC code.
After executing the event, I am displaying another screen where in I am displaying the result of BDC with Success/Error messages. Now in here when I press the back button it is taking me to the selection-screen.
How can I get back to the report screen after pressing the back button on the message screen.
Solution would be rewarded.
Thanking You,
Kiran Kumar S

Hi Anji,
I am not calling a screen exclusively for my BDC, so whatz happening is the new messages report is getting displayed on the same screen and I am losing the report screen. BDC is not written as a different program and hence I could not use SUBMIT.
The thing I am doing is SET PF-STATUS 'xxx'. I have defined a GUI for 'xxx'.
So this is setting GUI and then displaying the error/success messages report on the same screen.
How do i handle this?
Regards,
Kiran

How to display a frame at the upper left corner of each screen?

hi,
below are 2 ways to display a frame at the upper left corner of each screen (i have 2 monitors).
both work but the 2nd way is much slower. which, if any, of the 2 approaches is "more" correct?
import java.awt.Canvas;
import java.awt.Color;
import java.awt.Dimension;
import java.awt.DisplayMode;
import java.awt.event.MouseListener;
import java.awt.event.MouseEvent;
import java.awt.event.MouseAdapter;
import java.awt.GraphicsConfiguration;
import java.awt.GraphicsDevice;
import java.awt.GraphicsEnvironment;
import java.awt.Point;
import java.awt.Rectangle;
import java.awt.Toolkit;
import javax.swing.JFrame;
import javax.swing.JPanel;
// the thing that matters in here is setting the frame's location: xCoord
// is incremented in each iteration by the current screen's width and
// is used to set the frame's x-coordinate.
public static void main(String args[])
      GraphicsEnvironment gEnviron = GraphicsEnvironment.getLocalGraphicsEnvironment();
      GraphicsDevice[]    gDevices = gEnviron.getScreenDevices();
      Color colors[] = {Color.blue, Color.red};
      for(int i = 0, xCoord = 0; i < gDevices.length; i++)
         // set panel's size and frame's size to take up the whole screen
         DisplayMode didsplayMode = gDevices.getDisplayMode();
int screenWidth = didsplayMode.getWidth();
int screenHeight = didsplayMode.getHeight();
JPanel panel = new JPanel();
panel.setBackground(colors[i % colors.length]);
JFrame frame = new JFrame();
frame.setSize(new Dimension(screenWidth, screenHeight));
frame.setContentPane(panel);
frame.setUndecorated(true);
// set location of frame.
frame.setLocation(xCoord, 0);
xCoord += screenWidth;
frame.addMouseListener
new MouseAdapter()
public void mousePressed(MouseEvent event) {System.exit(1);}
frame.setVisible(true);
// this is a lot slower and may not be correct: it sets the frame's location by calling
// getConfigurations() on each screen device but using only the 1st configuration
// (it returns 6 on my computer) to get the bounds (for the frame's x-coord).
// a screen device has 1 or more configuration objects but do all the objects
// of the device report the same bounds? if the anwser is yes, then the code
// is correct, but i'm not sure.
public static void main1(String args[])
GraphicsEnvironment gEnviron = GraphicsEnvironment.getLocalGraphicsEnvironment();
GraphicsDevice[] gDevices = gEnviron.getScreenDevices();
Color colors[] = {Color.blue, Color.red};
for(int i = 0; i < gDevices.length; i++)
// set panel's size and frame's size to take up the whole screen
DisplayMode didsplayMode = gDevices[i].getDisplayMode();
int screenWidth = didsplayMode.getWidth();
int screenHeight = didsplayMode.getHeight();
JPanel panel = new JPanel();
panel.setBackground(colors[i % colors.length]);
JFrame frame = new JFrame();
frame.setSize(new Dimension(screenWidth, screenHeight));
frame.setContentPane(panel);
frame.setUndecorated(true);
// set location of frame: getConfigurations() is very time consuming
GraphicsConfiguration[] gConfig = gDevices[i].getConfigurations();
// on my computer: gConfig.length == 6. using the 1st from each set of configs
Rectangle gConfigBounds = gConfig[0].getBounds();
frame.setLocation(gConfigBounds.x, gConfigBounds.y);
frame.addMouseListener
new MouseAdapter()
public void mousePressed(MouseEvent event) {System.exit(1);}
frame.setVisible(true);
thank you.

Darryl.Burke wrote:
Blocked one abusive post.
@flounder
Please watch your language.
dbDude - I just looked at your profile. WTF are you doing in India??

How to display Entity level validation messages in a table

I'm using ADF 11g 11.1.1.2.0. I have a page with an updateable table based on an EO. In the EO I have defined some entity level and attribute level declarative business rules. When the user enters a value in the table that violates an attribute level validation, the related message is displayed inline and the attribute is surrounded by a red box. Furthermore the user is not able to place his cursor in a different row. In this way it is clear which row and attribute caused the error. However if the user enters some data that violates an entity level validation, the validation message is displayed as global messages in the message-popup when the business rule is based on a script or a method. This means that the user gets a global message popup, and does not know which row caused the error. Ofcourse we can include the identifying attributes of the row in the error message, but I would like to know if there is another more visual way to communicate to the user which row caused the error.
Edited by: Jonas de Graaff (PSB) on 10-feb-2010 2:51

Hi Chittibabu,
what about using a TreeTable control?
SAPUI5 SDK - Demo Kit
Regards
Tobias

How to display Success Message on the Left side of Screen

I am displaying a Process Success Message after the ApplyMRU process, *#MRU_COUNT# row(s) updated*. By default, this message is displayed at the center of the screen. I would like to display this message at the left hand side of the screen.
I am using APEX 4.0; Theme Sand - 10. I have tried changing the alignment for the success message position in the Page Template – One Level Tabs, HTML Body section. But I am not having any luck.
Does anyone know how to change/override the default position for the success message?
Thanks

Andy,
I tried what you suggested and the success message is still being displayed in the center of the page.
I went to Template --> Page --> One Level Tabs. In the Header, I put the following lines before the </head>
<style type="text/css">
.t10messages {text-align:left;}
</style>
</head>
<body #ONLOAD#>
#FORM_OPEN#
I do not have any other custom CSS. Just strictly using Theme 10 - Sand
Any ideas on what else could be the reason?
Thanks,
DP
Sorry for the delayed response - out for holidays.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

Drilling via Hierarchy - how to display upper levels of the hierarchy??

Similar Messages

Maybe you are looking for