Drive does not appear in ISCSi volumes

Hi,
I have configured a windows server 2012 r2 OS with 2 disks/ The server is a VM. Both disks are SCSI. Hoerver, the data disk does not show in ISCSI setup
Screenshot of the part in question is here:
https://weikingteh.files.wordpress.com/2012/12/image13.png
Any help appreciated

Sorry for the delay. However I still cannot confirm the exact status.
I assume the Drive S is not the data drive. Please open Disk Management to see if your Data is listed with a drive letter. Also test if you can access it correctly.
Also though you mentioned these 2 disks are SCSI disks, whether they are physical disk on host (physical) computer, or they are 2 VHD files created on hard disk and connected in Hyper-V?
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN

Instant Client on 64-bit Windows 7: Driver does not appear in System DSN tab when creating a new Data source.
What I did so far:
I downloaded the basic and odbc zips for Window 64-bit.
Unzipped the basic zip.
Unzipped the odbc zip to the same directory.
Added the dir path to the System Environment Variable called Path.
Double-clicked on the odbc_install.exe to run it from Windows Explorer.
Then I tried to add the driver to create a new data source but it does not appear in the list of drivers.
From a cmd window, I navigated to the instant client directory and tried to run odbc_install again.
I got the message: Oracle ODBC Driver with same name already exists.
What am I missing?

hello, I did it like that you say,but the result also is "oracle odbc driver with same name already exists". I don't kown what can I do it ,Thank you!

HT201250 i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

Look in the Utility folder which is located inside the Applications folder.
You don't want to do anything with the disk on a PC if you want it to work on the Mac. They both use different formats.
Allan

Hard drive does not appear on the Desktop

Hard drive does not appear on desktop. Can only be found in the applications folder.

Go to Finder -> Preferences, click the General icon, make sure the appropriate box is checked.

Finder & Dock do not work - Mac Hard Drive does not appear on Desktop

Until yesterday, my powerbook was working properly.
This morning, I wanted to use it and I had the following problems after login.
1/ My Mac Hard drive does not appear on my dekstop
2/ My dock appears but no icon works when I click on them. So, I can't open finder. I have no response.
3/ Furthermore, my top bar (with clock, login name, Airport icon...) appears but it is frozed.
I try several solutions as :
- rebooting in safe mode,
- rebooting, with in the same time, hold different keys (option, apple, p & R)...
As of today, no solution works.
Thanks for your help.

A.CHAMP wrote:
Nota: if i used my daugther login (she is not admin), I have the same issues.
Ok, that's good enough. You may be able to repair this with the 10.5.8 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
EDIT:
I have around 5 Go space left on my Mac
Also, your getting very low on disk space. Try to copy some of the data off to other media. *Do it before you try applying the combo, you'll need the space.*
-mj
Message was edited by: macjack
Message was edited by: macjack

Driver does not appear in the selection tab Windows8

NDIS protocol driver does not appear in the Selection Tab and hence I can not run any tests on it. The client operating system is Windows 8 64bit Pro Premium. I tried reinstall driver several times, reboot client and studio machines, but with no results.
Client itself is connected to the studio and is in "Ready" state.
There was no problem running the test on the same driver with Win7 64bit client OS.
HCK version is 8.59.29854
The driver is build with DDK7.1.0
Any hints on how to debug this would be helpful.
Dmitry

Have you uninstalled and re-install the HCK client on the test system? This can cause the entry on the controller to not match up with the actual client system. If this is the case, and you have done no testing on the system (as all results will
be lost), please try this:
1) Uninstall the DTM client from the test system.
2) Delete the client entry from HCK studio in the machine management section.
3) Reinstall the DTM client on the test system.
4) Wait for client entry appear in the "Default Pool"
5) Change client status to "Reset", wait for it to become "Ready", and try locating the target as I describe above.
Paul - This posting is provided "AS IS" with no warranties, and confers no rights.

Epson DX5000 driver does not appear on list in'print using' box

Epson DX5000 driver does not appear in list despite the fact that I have downloaded the software.
When the printer is connected and I try and print I first go to 'add printer' in the print dialogue window. This takes me to the printer browser where the Epson DX5000 appears - at this starge I can't add as this option is not highlighted. Instead I have to go to 'print using' where I click on Epson - this is where the problems start as the DX is not on the very long list.

Hi Ali
Yes I have installed the software
I have been using another printer so I realise that I don't need to add printer each time - this is the first time using this new printer
After I 'add printer' I am taken to the printer browser where the RX5000 is listed (this is in the default browser mode) when I then click the RX5000 the name and location appear in the appropriate boxes but I am unable to press the 'add' button. I have to go to more printers where I then go on to look in the epson folder.
this is where I get stuck as my printer is not listed

New Downloaded/Installed Cannon PPD Print Driver does not appear in driver list

I have downloaded and installed every new driver, 5 times, including he PPD driver for the Canon imagerunner 5570 printer, however when I add the printer the PPD driver does not appear in the list of drivers. the printer is on a wireless network and I was able to print before updating. I had not set up Time Machine until today so I can't go back, or can I. I am a new Mac owner so please be gentle.
Thanks

The PPD installer will copy files to HD > Library > Printers > PPDs > Contents > Resources > en.lproj and the file names will be "cnxxxx.pdd". Can you first check that you have all the files installed.
If you do have the files then you can add the printer using IP > LPD for the protocol. Note that the iR5570 does not support Bonjour so it won't appear in the Default view of Add Printer as Zlig suggested. You then enter the IP address of the iR5570, leave the queue name blank, change the name to something meaningful and then search for the ir5570 in the Print Using menu.
If there are no Canon iR models listed in the Printer List (typing iR in the Search field will determine this) then you should try resetting the printing system as follows.
1. Open System Preferences > Print & Fax
2. Move the mouse over the Printers list.
3. Hold down the Control key and then click the mouse
4. Click on the 'Reset printing system' pop-up
5. Close Print & Fax and restart your Mac
This will remove all the printer queues from Print & Fax but will not remove the printer drivers installed on the Mac. So you can try adding your print queue to the iR5570 again using the process above.

Airport Extreme connected drive does not appear in Time Machines drive list

I have two Macbook Pros. Both have 500GB hard drives. I have an airport Extreme with a WD terabyte hard drive and a HP printer attached via USB cable. Both Macbooks can access the WD HD & internet.
One MacbookPro has time machine set up to use the Terabyte HD as backup.
I want the other MacbookPro to also use this terabyte drive for backup.
But when I try to set up Time Machine to use the drive, the drive does not appear in the backup drive list.
What can I do to fix this? I had a HD crash on the non-backed up Macbook recently. I desperately need it to be backed up!
Any ideas?

Does the drive show in Disk Utility? Try a restart.

ISCSi drive does not appear in list of volumes

Hi,
I have configured a windows server 2012 r2 OS with 2 disks/ The server is a VM. Both disks are SCSI. Hoerver, the data disk does not show in ISCSI setup
Screenshot of the part in question is here:
https://weikingteh.files.wordpress.com/2012/12/image13.png
Any help appreciated

Hi,
It seems that we cannot view existing disks in ISCSI setup. If you want to load an existing VHD file, you could use Import-IscsiVirtualDisk command to add an iSCSI Virtual Disk object.
For more detailed information, please see:
Introduction of iSCSI Target in Windows Server 2012
http://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-of-iscsi-target-in-windows-server-2012.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Trying to make RAID boot drive - but drive does not appear when starting up

Used Disk Utility to take current boot drive and put it in mirrored RAID. Did this by taking volume, placing it in RAID window, and clicking "enable".
The new drive is shown as bootable, and selectable by Startup preferences but does not work. When I hold Option key during startup, the RAID drive does not show up. Apple support offered no help and said I should get hardware card. (Will add second drive after RAID is bootable).
The 'virtual' disk for the RAID drive (disk4) seems to not be visible.

Howdy bhagon,
It sounds like the iPhone is not recognized in iTunes. Allow me to recommend this troubleshooting assistant named:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Start at step 1 and work your way down as needed. Here is that step 1 to get you started:
Update iTunes
Make sure you have the latest version of iTunes. To check for available updates of iTunes on a Mac, go to iTunes > Check for Updates. On Windows, go to Help > Check for Updates.
To install iTunes, you need one of the following operating systems on your computer:
Mac: OS X version 10.6 or later
PC: Windows 7; Windows Vista; or Windows XP
Note: If you are using a 64-bit version of Windows 7, be sure to download the 64-bit version of iTunes.
If your computer does not meet these requirements, you may need to upgrade your computer before installing iTunes.
Thank you for using Apple Support Communities.
Regards,
Sterling

Drive does not appear in finder

My Time Machine drive is connected but the drive itself does not appear in the device list in finder. I can set Time Machine preferences in Time Machine software but I cannot access the drive through Finder.

Thought I'd post a couple of screenshots to help - a pic is worth.....
This is the System Preferences > CD/DVD Pane which no longer appears on Macs without an optical drive (this is from my MBP with a Superdrive):
This is the iPhoto Preferences window (within iPhoto):
But, none of that applies to external optical drives because they will never show - the preferences you set will show the media, but not the drive. My external optical drive is brand new from OWC and it does not show. However, it works like a charm.
As for your RAID setup - as I said, i can't help there because I have never used it.

Canvio External Hard Drive does not appear in MY COMPUTER

Sorry if the subject is in wrong section of the forum.
I bought an External Hard Drive to use with my Windows 7 laptop. When connecting, sounds like a new device is connected, also appears listed in DEVICES & PRINTERS, but does not appear in MY COMPUTER, becoming impossible to access it anyhow.
Procedures about how to format or change device letter (in DISK MANAGEMENT), although the device has been also shown there, haven't work.
"Drivers" are listed as updated.
Any suggestions?
Thanks!

Jerry, thanks for trying to help.
I download the KillDisk as your adviced.
The Hardware appears there like:
Hard Disk 2 (82h) TOSHIBA External USB 3.0 - [DEVICE IS NOT READY]
Local Disk (2 - [DRIVE IS NOT READY]
Available actions for each are: Mark / Unmark / Refresh.
Any possibility of it is broken, or something?

DVD drive does not appear on the "Computer" drive screen

I have lost access to the DVD drive. It does not appear on the "Computer" drive screen.
It will start up with a disk inserted but shuts down after a approx 20 seconds without having opened any files.
The DVD light comes on when it first starts up and then goes off within a few seconds.
I have re-installed the Toshiba driver and still no access.
I believe it started when I installed a new WD 1Tb external drive which setup its virtual CD drive on the E: drive which was used by the DVD drive. I have moved the external drive to G: and left the E: drive letter vacant but still not working.
Any ideas how I can solve this? It would be greatly appreciated.

I don't know if this will help you but check it anyway
http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

External Hard Drive does not appear in finder

We purchased a 1 TB G Drive Q from the Apple Store. It is connected to my wife's iMac running the most current update of Leopard by 800 firewire and appears on her desktop and works flawlessly with time machine. I am connected to the same drive intermittently with my MacBookPro also running the most current update of Leopard. i connect with 400 firewire. Initially the drive would not appear in the finder. for the initial backup, i turned the hard drive off and on and then it would appear and i did the backup but now when i connect to the 400 firewire port, it still doesn't appear in the finder. i would much prefer not to need to turn my back up drive off and on each time i want to use time machine. i should also mention that when i connect any of my garmin training devices or my power meter by USB it is recognized very quickly as a device in finder. any ideas? i understand this may be one of the problems fixed with SnowLeopard. thanks.

I am not sure what you are attempting to do. I assume that you are not trying to connect two computers to the same external drive at the same time. That will definitely be problematic. In order to effectively use Time Machine with two Macs, you should partition the drive into two partitions. Also make sure that the drive is using a GUID partition scheme.
bd

Drive does not appear in ISCSi volumes

Similar Messages

Maybe you are looking for