Drive sound when waking from sleep?
Hi, I am getting a short 2-3 second drive sound when I wake my MBP from sleep. It sounds like it is checking to see if there is a disc in the drive or something. Also might be described as the sound when your first put a disc into the drive(but maybe shorter). Is this normal? And also if it is normal is there a way to stop it from making the noise because I actually find it annoying me, I wake my computer from sleep a lot throughout the day. My friends MBP who bought his just a few months before mine does not make a sound when waking from sleep. Thanks.
They all do. All of them. Yours. Mine. Your friend's. Old PowerBooks. Brand new MBPs. Everything in between.
My friends MBP who bought his just a few months before mine does not make a sound when waking from sleep.
Maybe his optical drive is broken?
Or, more likely, it's not waking up from sleep at all - Energy Saver settings can be used to set the display to sleep before the MBP sleeps - a key press will "wake" the display, but the MBP itself was not asleep, thus no noise from the drive when it the display is reactivated.
Similar Messages
-
Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue. The Ext Drive worked perfectly until the upgrade..
Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions.. -
Unusual sound when waking from sleep
To start off I have a black MacBook that I bought around March of 2006. Never had this problem before so I am a little concerned.
Okay to the issue, I woke my Mac up around 1:40pm today but instead of the usual wake up noise I got something else. It's the regular noise only it sounds a bit slower and lasts a second or two longer then it normally does. I wait a bit then I put my Mac back to sleep. After waiting 2 or 3 minutes I woke my mac back up with the same results. It wakes up fine, but it emits that unusual sound when waking up. I don't know if this is related or not but before waking the first time I did notice that my Mac was a little warn where the powercord attaches even though it had been off since about 3pm the day before and was located in a relatively cool room.
I also noticed when I put my ear up to my Mac that there is a weird buzzing sort of sound. It is continuous, but can only be heard if I put my ear up to the keyboard.
I'm wondering if something went bad on my Mac, since I have had it for about 3 years now with no prior issues other then heat issues.
Any help would be much appreciated.The usual wake up noise you refer to is the optical drive spinning so as to check to see if there is a disc inserted in it.
Your Macbook should not be at all warm anywhere if it had been off for a few hours as you said. It should be room temperature if it was indeed shut down. Are you certain it was shut down?
I don't have any solutions to your problem, but just stating a couple points.
If it continues to do this try booting up into another User Account. Create a new account for this purpose. If it works good in a new, clean user account then the problem is in your main account. If the problem still persists in the new account try an Archive and Install with the install DVDs. If this does not cure it then the problem may well be hardware, but not for certain. But, this is the non-destructive, non-evasive way to go to start with solving the problem. -
Noisy CDRW when waking from sleep
I see there is a firmware update if I have a superdrive to make the drive quiet when waking from sleep.
http://support.apple.com/kb/HT3744
Thanks,
JoeGetting this same error since switching from Firewire to USB. I have a Maxtor drive in an Adaptec enclosure. It has it's own power supply and both USB and Firewire 400 connections. Just upgraded to a new Mini from old Powerbook, so no more Firewire 400!
The big difference between USB and FW:
With the old PB G4 and Firewire, when I put it to sleep, I could hear the external drive actually spin down. On wake up, It would spin up and mount properly. Now with the Mini and USB, when I sleep the Mini, the external drive NEVER SPINS DOWN. I did some research and found that many drives have built-in power management that basically powers them down after some idle time. So the Mini is going to sleep with mounted drives, at some point later the drive sleeps itself, then when the Mini wakes, the drive's not there.
Obviously, Firewire is doing a better job of talking to my external than USB. I'm ordering a FW400-to-800 cable and will test this. I also think it has something to do with the chipset/firmware in the external enclosure, as many people are reporting their external USBs behave properly during sleep. -
Missing sound + missing USB power (sometimes) from Thunderbolt Display when waking from sleep
Hi
Two problems - one of which is driving med crazy!!
Have the latest updates, and the display is connected to a MBA (mid 2011).
The two are almost alwayes connected, and every time I wake the MBA from sleep, the Thunderbold Display does not "support usb sound" - the sound options are only MBA and headphones. Only a restart will give me the option to use Thunderbolt as sound output: WHAT TO DO!?!?!!
Sometimes when waking from sleep the USB in the Display seems to be "off" - the will not charge my devices (iPhone, iPad etc.). Only reboot seems to fix this... I have seen this in other discussions but not found a permanent solution - any thoughts?Same here but reinstalling OSX is a bit drastic. I solved the problem by deleting a preference.
Go to Macintosh HD then System then Library then Preference panes then Sound.prefPane
Delete Sound.prefPane (you need to type your password).
Logout or restart.
This has happend twice this week so WHY is this suddenly occurring?
Hi,
I found this solution in the forum, but I can't find it again. I had cut and pasted it into a text file, because it solved my problem. I just don't want to take any credit for it. It did work for me. I had no problems for 3-4 weeks with the monitor, I have had the sound problem since last Friday. Very frustrating.
BSGINC -
External Hard Drive Fail After Waking from Sleep
Hi,
I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions.. -
Keychain is read-only when waking from sleep
So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks
Hello-
Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May 1 2013) initialization complete
7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished():
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
7/10/13 6:53:14.354 AM configd[18]: network changed.
7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
7/10/13 6:53:18.519 AM blued[65]: Read version 2 info. Number of devices:2
7/10/13 6:53:18.519 AM blued[65]: Class of device: 0x2580
7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
7/10/13 6:53:18.520 AM blued[65]: Class of device: 0x2540
7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
7/10/13 6:53:20.635 AM kdc[54]: label: default
7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
7/10/13 6:53:24.499 AM digest-service[87]: label: default
7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
7/10/13 6:53:25.671 AM kdc[54]: KDC started
7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cc300000000042730c0
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent absolute time: 85.254455240 civil time: Wed Jul 10 06:54:03 2013 pid: 153 uid: 503 root: no
7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a] @ 0x0x7fe8b9e31660 because it's already been started.
7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows.
7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey= -
Kernel Panics when waking from sleep? 2012 MBA Base Model
I've been having some trouble with my 2012 MacBook Air. It was running perfectly until about 2 weeks ago. Now, when waking from sleep, I am getting Kernel Panics that force the restart of my Mac. I was wondering if anyone could provide insight on the issue.
An example log file is below:
Mon Jun 17 18:34:31 2013
panic(cpu 0 caller 0xffffff802c4b8655): Kernel trap at 0xffffff7fac9bb786, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002e792000, CR4: 0x00000000001606e0
RAX: 0xffffff80389af900, RBX: 0xffffff8096e07000, RCX: 0x0000000000000002, RDX: 0x0000000000000004
RSP: 0xffffff80a54f3dc0, RBP: 0xffffff80a54f3de0, RSI: 0x0000000000000002, RDI: 0x0000000000000000
R8: 0xffffff80389c4000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8038986800, R13: 0x0000000000000002, R14: 0x0000000000000004, R15: 0x0000000000000002
RFL: 0x0000000000010246, RIP: 0xffffff7fac9bb786, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a54f3a60 : 0xffffff802c41d626
0xffffff80a54f3ad0 : 0xffffff802c4b8655
0xffffff80a54f3ca0 : 0xffffff802c4ce17d
0xffffff80a54f3cc0 : 0xffffff7fac9bb786
0xffffff80a54f3de0 : 0xffffff802c83a02c
0xffffff80a54f3e30 : 0xffffff802c8364f1
0xffffff80a54f3e80 : 0xffffff802c841694
0xffffff80a54f3ec0 : 0xffffff802c835ccb
0xffffff80a54f3ef0 : 0xffffff802c84138d
0xffffff80a54f3f30 : 0xffffff802c84708a
0xffffff80a54f3f80 : 0xffffff802c8471b9
0xffffff80a54f3fb0 : 0xffffff802c4b3137
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBFamily(5.6)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffffff 7fac99b000->0xffffff7fac9f6fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fac972000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide: 0x000000002c200000
Kernel text base: 0xffffff802c400000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 4372661007505
last loaded kext at 244544510921: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7fae0e8000, size 65536)
last unloaded kext at 304724110055: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7fae0e8000, size 57344)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.2.6
org.virtualbox.kext.VBoxNetFlt 4.2.6
org.virtualbox.kext.VBoxUSB 4.2.6
org.virtualbox.kext.VBoxDrv 4.2.6
com.silex.driver.sxuptp 1.10.1
com.globaldelight.driver.BoomDevice 1.1
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.1.4f2
com.apple.driver.AGPM 100.12.87
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.5
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleIntelHD4000Graphics 8.1.2
com.apple.driver.AppleIntelFramebufferCapri 8.1.2
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.XsanFilter 404
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleAHCIPort 2.5.2
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 5.6.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.iokit.IOAcceleratorFamily 74.5.1
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOBluetoothFamily 4.1.4f2
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.7.8
com.apple.iokit.IOThunderboltFamily 2.4.0
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IO80211Family 530.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.6.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0The problem stemmed from something related to USB. I suggest uninstalling the third-party software responsible for installing these items:
org.virtualbox.kext.VBoxNetAdp 4.2.6
org.virtualbox.kext.VBoxNetFlt 4.2.6
org.virtualbox.kext.VBoxUSB 4.2.6
org.virtualbox.kext.VBoxDrv 4.2.6
com.silex.driver.sxuptp 1.10.1
com.globaldelight.driver.BoomDevice 1.1
Alternatively you can boot into Safe Mode which will not load those device drivers, and see if you panics cease. If they do, then you can uninstall the software. BTW, the current version of Virtual Box is VirtualBox-4.2.12-84980-OSX. -
Workaround for the problem of ultrabay HDD ejecting when waking from sleep
After trying every possible "solutions" with no luck for the problem of the second hard drive always ejecting/disconnecting when waking from sleep in my T530, I've decided to create my own workaround.
This is by no means a definitive solution but a nice workaround that uses little resources on the machine.
The idea is to simply let a program runs constantly from the second hard drive. That way, when the HDD tries to disconnect, Windows is not allowing it and then it stays allways connected.
To make it more thansparent I decided to create a Windows service that starts when Windows boot and stops when Windows shutdown.
This Windows service is very lightweight : it does absolutely nothing and just waits indefinitively.
The trick is that it just have to be started from the second hard drive.
Here is a link to the Windows service, 32-bit and 64-bit, with the source code and scripts to install/uninstall.
Just install it anywhere on the second hard drive (D: in my case).
https://docs.google.com/file/d/0BxusNBl7tTO-Y3J5VDB3d2lQRzg/edit?usp=sharing
Works perfectly for me on my T530 with Windows 7 Pro x64.Hmm, I have no problem with Ultrabay ejecting HDD when waking from sleep mode. At first, I went down the same
route as you did. For the first few days when I received my T530 I kept an .iso file from Ultrabay HDD always mounted.
But then I disabled all power saving options within Windows and Lenovo Power Manager and it seems to work fine.
Works both with Windows 8 (64-bit) and Windows XP Professional (32-bit).
T530: i7-3630QM, 4 GB DDR3-1600, NVS 5400M, 2x 500GB 7200RPM, 9-cell, HD+ 1600x900, Backlit US, WinXP Pro
L430: i3-2370M, 4 GB DDR3-1600, HD 3000, 320GB 7200RPM, 6-cell, HD 1366 x 768, Win7 Home Premium 64-bit -
Kernel Panic when waking from sleep mode., Kernel Panic when waking from sleep mode.
Hi,
I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
I am not very computer savy - I.e. I use a computer but don't know programming etc.
The computer then asks me to shut down and restart.
Any help would be much appreciated as this is driving me crazy.
An example of the latest kernel panic log as as follows:
Fri Jan 6 21:25:02 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808073b1e0 : 0xffffff8000220702
0xffffff808073b260 : 0xffffff80002c266d
0xffffff808073b400 : 0xffffff80002d7a1d
0xffffff808073b420 : 0xffffff80002936b3
0xffffff808073b540 : 0xffffff800029383b
0xffffff808073b560 : 0xffffff800029485b
0xffffff808073b590 : 0xffffff800027e44b
0xffffff808073b5f0 : 0xffffff7f811a44dd
0xffffff808073b630 : 0xffffff7f811a36c4
0xffffff808073b760 : 0xffffff8000328517
0xffffff808073b7b0 : 0xffffff80002e823b
0xffffff808073b8a0 : 0xffffff80003170ce
0xffffff808073b8d0 : 0xffffff80002ec664
0xffffff808073b9e0 : 0xffffff80002f0229
0xffffff808073ba50 : 0xffffff80002f0265
0xffffff808073ba80 : 0xffffff80004e6833
0xffffff808073bb50 : 0xffffff8000316ca3
0xffffff808073bba0 : 0xffffff80005a6e29
0xffffff808073bc30 : 0xffffff8000265675
0xffffff808073bc80 : 0xffffff80002651f3
0xffffff808073bcc0 : 0xffffff800026a62f
0xffffff808073bdc0 : 0xffffff800026cdb4
0xffffff808073bf40 : 0xffffff80002c1f0b
0xffffff808073bfb0 : 0xffffff80002d7941
Kernel Extensions in backtrace:
com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
BSD process name corresponding to current thread: corestoraged
Boot args: 0x0
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 46767492658
last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver 1.0.2d2 (addr 0xffffff7f81930000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.kext.ATIFramebuffer 7.1.2
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleBacklight 170.1.9
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.ATIRadeonX2000 7.1.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.CoreStorageFsck 182.10
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AirPortBrcm43224 500.36.11
com.apple.driver.AppleUSBUHCI 4.4.5
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.3f7
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI2600Controller 7.1.2
com.apple.kext.ATISupport 7.1.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.CoreStorage 182.10
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IO80211Family 411.1
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
This is all double dutch to me.
Would anyone be able to help please???
Thank you very much !!
DaveHi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave -
Spinning ball when waking from sleep
I'm running Leopard (10.5.7) on a PPC and over the last 2 days it's been freezing when waking from sleep.
On waking cursor moves, and Spaces works but as I click on each open application they lock up. iStat also freezes.
The panic log has a reference to com.apple.iokit.IOATAFamily - does this point to hard drive issue??
*Panic Log*
Tue Jun 16 07:52:02 2009
panic(cpu 0 caller 0x000B0504): "Uncorrectable machine check: pc = 0000000000891B34, msr = 0000000000149030, dsisr = 42000000, dar = 000000000991B000\n" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000\n" " L2FIR = 0000000000000000, BusFir = 0000000000000000\n"@/SourceCache/xnu/xnu-1228.12.14/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace:
0x0009CC88 0x0009D63C 0x00029DA0 0x000B0504 0x000B0784 0x000B4278
Proceeding back via exception chain:
Exception state (sv=0x32c0cc80)
PC=0x00891B34; MSR=0x00149030; DAR=0x0991B000; DSISR=0x42000000; LR=0x00896DBC; R1=0x39A1FC60; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00896CE0 0x00896DBC 0x00890D7C 0x00896E14 0x00890CA4 0x00897C98
0x0003F2A0 0x000B1DD4
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOATAFamily(2.0.1)@0x88a000->0x89bfff
Exception state (sv=0x2cb41500)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9J61
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:54:29 PDT 2009; root:xnu-1228.12.14~1/RELEASE_PPC
System model name: PowerMac3,3
System uptime in nanoseconds: 6147457352912
unloaded kexts:
com.apple.driver.AppleBurgundyAudio 2.5.8f1 - last unloaded 2815127073
loaded kexts:
com.apple.filesystems.autofs 2.0.2 - last loaded 949460253
com.apple.iokit.CHUDUtils 200
com.apple.iokit.CHUDProf 207
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.ATIRadeon8500 5.4.4
com.apple.driver.AppleScreamerAudio 2.5.8f1
com.apple.driver.AppleBurgundyAudio 2.5.8f1
com.apple.driver.AppleAirPortFW 400.9
com.apple.driver.AppleSCCSerial 1.3.2
com.apple.driver.AppleUSBDisplays 2.0.2
com.apple.driver.AppleThermal 1.0.1f2
com.apple.driver.InternalModemSupport 2.4.0
com.apple.driver.AppleUSBHIDMouse 1.2.3f1
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleUSBMergeNub 3.4.3
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.0.9
com.apple.iokit.SCSITaskUserClient 2.0.9
com.apple.driver.AppleUSBHub 3.4.0
com.apple.iokit.IOUSBUserClient 3.3.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATAPIProtocolTransport 1.5.2
com.apple.iokit.IOATABlockStorage 2.0.5
com.apple.driver.ApplePMU 2.5.6d2
com.apple.iokit.AppleMediaBay 1.0.2f1
com.apple.driver.KeyLargoATA 1.1.1f1
com.apple.driver.AppleVIA 1.5.1d1
com.apple.driver.AppleMPIC 1.5.3
com.apple.iokit.AppleGMACEthernet 1.5.7f1
com.apple.driver.AppleI2C 4.0.0d2
com.apple.driver.AppleFWOHCI 3.8.2
com.apple.driver.AppleUSBOHCI 3.3.5
com.apple.driver.AppleKeyLargo 1.7.2f1
com.apple.driver.AppleMacRiscPCI 3.4.0
com.apple.driver.AppleCore99NVRAM 1.1.1
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.6.77
com.apple.security.TMSafetyNet 3
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.driver.AppleMacRISC2PE 1.8.7d5
com.apple.iokit.CHUDKernLib 196
com.apple.driver.ndrv.ATY,Radeon9000i.0x1`In an attempt to fix the problem I booted from the Leopard Install Disc.
The machine has 1 HD installed that's partitioned in 2 - OS on one volume, data on the other.
In Disk Utility the boot volume's name is disk0s10 rather that the name I gave it (the other volume name is OK). Could this have anything to do with the problem? -
I have a G4 iBook 1Ghz, 512MB Ram, 60 g HD, running 10.3.9. When waking from sleep, it has a loud buzzing noise that comes from the speakers. I know it is the speakers as you can silence it with the volume. If you restart, it is silent. It is silent from startup. It only does this on waking from sleep. At times it won't wake up at all, only responding to a forced restart. I've zapped the PRAM, reset the PMU, and all of the sound preferences. Anybody got any other suggestions?
Thanks, Andy FordI have this problem too. Sounds like shaking a can with some sand in it. Soft, not really noticeable unless you are in a quiet room or using headphones. Have all sound effects turned off in system preferences.... Have tried muting the volume. That doesn't work.
I also notice that I get the same sound if I do something that would otherwise generate a system error noise (like searching for a term in Safari that is not present on the web page). But only on the first instance. So on my initial search for the term, I get the soft noise. If I do Cmd-G to search again, no noise.
It's strange and I wish it would go away but I have been able to ignore it so far. -
Problem when waking from sleep
Hi all, my mbp has real problems when waking from sleep - I hear the dvd drive do something, the screen comes on but remains black, and then nothing else - no keys work, only holding the power button has any effect.
I have a screensaver password on.
Anyone heard of this before or have any ideas?
Thanks!It might also be worth trying the following:
Reset PRAM and NVRAM: http://support.apple.com/kb/HT1379
Reset SMC: http://support.apple.com/kb/HT1411 -
When waking from sleep getting "Device Removal" error on Lacie external
When waking from sleep getting "Device Removal" error on Lacie external drive. This drive is my Time Machine back-up and I don't want to lose it. I don't know if anyone else has seen this error. Let me know.
Getting this same error since switching from Firewire to USB. I have a Maxtor drive in an Adaptec enclosure. It has it's own power supply and both USB and Firewire 400 connections. Just upgraded to a new Mini from old Powerbook, so no more Firewire 400!
The big difference between USB and FW:
With the old PB G4 and Firewire, when I put it to sleep, I could hear the external drive actually spin down. On wake up, It would spin up and mount properly. Now with the Mini and USB, when I sleep the Mini, the external drive NEVER SPINS DOWN. I did some research and found that many drives have built-in power management that basically powers them down after some idle time. So the Mini is going to sleep with mounted drives, at some point later the drive sleeps itself, then when the Mini wakes, the drive's not there.
Obviously, Firewire is doing a better job of talking to my external than USB. I'm ordering a FW400-to-800 cable and will test this. I also think it has something to do with the chipset/firmware in the external enclosure, as many people are reporting their external USBs behave properly during sleep. -
IMac G5 Dies When Waking From Sleep
I have a Rev A iMac G5 I bought in 2004. Recently it started doing some weird stuff when waking from sleep. After looking at some of the other posts, I think this is going to be repetitive, but I thought I would see if anyone had any suggestions
After either putting the computer to sleep or letting it go to sleep, it will frequently die after the mouse has been clicked to wake it up. I have tried resetting both the SMU and PRAM as well as repairing disk permissions and repairing the disk. None of this has seemed to help. Occasionally, I get lucky and am able to wake it from sleep normally, but this doesn't happen often. After it dies following the mouse click, I can unplug it and then plug it back in and it will start up normally. Interestingly, it will start up from shutdown normally as well as restart normally. Additionally, as long as it doesn't go to sleep, I think you can typically use it as long as you want and it won't quit.
Today, I took the back cover off and messed around with it for awhile. The diagnostic LED behavior seems odd to me. LED #1 comes on when it is plugged into the outlet. When following Apple's instructions for troubleshooting a computer that won't start up, mine does fine because as I said it will start up normally if you unplug it and then plug it back in. Because of this, I set my computer to go to sleep quickly with inactivity. Although it did wake normally at least once, it died numerous times. The irregularity seems to occur with LED #2. One time it "died", I believe LED #2 actually remained lit and something seemed to still be working based on noise. However, the green light for the "caps lock" button wouldn't come on. Other times LED #2 would go out when it died after pushing the mouse with it asleep. During these times, I could push the internal power button and LED #2 would briefly light up, but nothing more than that would happen. On more than one occasion I would then push the SMU reset button and then push the internal power button again at which point LED #2 would fail to come on at all. After pushing the power button (and occasionally pushing the SMU button again) what seemed to be a random number of times, the computer would all the sudden start up normally again.
My top 3 guesses are a failed power supply, failed logic board, or exhausted PRAM battery (I have never changed it). The first two may be a bit to pricey for me to consider replacing. If they are the problem, I may just settle for setting the computer to never sleep. Does this sound like it could be caused by the PRAM battery going out?
Any advice would be greatly appreciated!
Message was edited by: Joshua213My bad on not reporting back sooner. Indeed, replacing the PRAM battery did not fix the problem. The situation seems odd to me as I was able to sometimes wake the computer from sleep without it quitting while others times it dies. It does fine as long as it doesn't go to sleep. I can start it up and shut it down with no problems; additionally, it appears to do fine even when left on for long periods of time as long as it doesn't go to sleep. To be correct it doesn't seem to so much be the state of "sleeping", but the act of trying to wake it up from sleep. I don't think ventilation is a problem.
What I have done is just set it to not sleep. We just shut it down once in awhile. Rather than forking out the money, I think I will just use this work around as long as it continues to work.
Maybe you are looking for
-
Running macbook pro with lid closed
Hi all, I want to run the Macbook Pro with the lid closed, like maybe when I'm downloading a file or using it as a desktop with an external screen. I have insomniaX, however I am concerned about heat. The vent in the back seems to put out as much air
-
Why does my airplay disconect sometimes
While listening to music on macbook pro (no retina display) through airplay-appletv. Randomly, the icon will change from black to blue and return to playing through macbook speakers, and not through tv-stereo reciever-speakers. What could cause this.
-
We have material setup for MRP type VB. An initial purchase req was created when on hand stock fell below the minimum. The purchase req was converted to a PO and sent to the supplier. The supplier responded with an order confirmation with a different
-
Unexpected risks after rule update
I wanted to updat RAR rules in dev GRC as per Q2 2009 rule update provided by SAP. SAP recommendation for transaction FBV0 is: remove auth objects F_BKPF_KOA and add F_BKPF_BUK with actvt 01 or 02. As client wants to keep KOA active, I have done foll
-
Ipod 6 gen classic not completely syncing
I have a not even 2 month old 6 gen 120gb classic that was syncing fine a week ago, that is till yesterday. I've restored it 2 or 3 times already, and each time afterward, it will sync up until about the 404th song (anywhere from 3 gigs to about 3.7