Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615".
The dvd-rom drive will not read any type of dvd or cd.
desktop computer: Dell Dimension E310 , windows xp, service pack 3.
This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.
Where can I find driver files for this dvd rom?
Thanks,
Denise

Hello Denise,
Welcome to the Sony Community.
All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
• Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
• Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
service, storage support email
• Please remove your secondary IDE channel from the Device Manager.
If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
Thank you for your post.

Similar Messages

Solution needed for the following Requirement..

Hi Friends,
Need an answer for the following . Its for Voluntary Time Recording...
1) Maintain IT0007 with the percentage of employment for both part time and full time employees.
2) The Max Flexi-time for part-time and full-time employees is 37.5/40 hours per week.
3) Maintain attendance infotype.
4) Notification to be sent to the manager once the flexi-time reaches a limit of +15/-15 hours per week. This has to be done through workflow.
5) For the fulltime employees, the flexitime applicable is only +15 as they will maintain absence quota.
6) Once the request is approved , the flexi-time data has to get save in the database.
7) In the quota overview, the daily view is to be removed. The time accounts detail should not be there. The only relevant columns to be displayed are Key Date(Default is current date), Type(Flexitime) and Current Balance(in hours)
If you can please let me know of the configuration changes and workflow changes too...
Thanks,
Kumar

Moderator message - Please do not post your requirements and ask the forum to do your work for you.
post locked

Please urgent help needed for the following

Hi Everybody!
I desperately need help as soon as possible.
Following is the partial code for the driver program which will use the Employee class Objects(Employee is declared abstract). If you want to see whole code you can take a look at my last two or three posts in this forum.
1-     Now data input by the user in the specific field( name, rate ) should be displayed in the �List� at the top of the frame after pressing �Enter� key. Can anyone help me to achieve this functionality. While doing this keep in mind the capacity of Array
2-     I also need �rate� textfield to enabled initially & become disable when �raise� (for trigerring calculating raise in weekly pay) is checked. On this �increased� textbox will become �enabled� which was disabled initially.
3-     The stuff which may have the problems is followed by �*******************�.
// here is how I declared handlers
ActionEventHandler handler = new ActionEventHandler();
ItemEventHandler listener = new ItemEventHandler();
// here is the declaration of awt components which are going to be placed on Frame.
public class ActionEventHandler implements ActionListener
public void actionPerformed(ActionEvent event)
//if(event.getSource() == enterButton)
for (int i = 0 ; i < empArray.length; i++)
if(event.getSource() == enterButton)
empData.add(nameField.getText());
/*else if(event.getSource() == hoursField)
calcWeeklyPay();
if(event.getSource() == clearButton)
nameField.setText("");
hoursField.setText("");
rateField.setText("");
increaseField.setText("");
}//else if
}//ActionEventHandler
public class ItemEventHandler implements ItemListener
public void itemStateChanged(ItemEvent event)
//if(event.getSource() == enterButton)
if(hEmployee.getState())
createHourly();
}//if
/*else
sEmployee.setState(true);
createSalaried();
}//else*/
else if(raiseSal.getState())
increaseField.setEnabled(true);
rateField.setEnabled(false);
}//itemStateChanged
}//ItemEventHandler
public void createHourly()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
//empData.add(emp.toString());
enterButton.setLabel("add");
}//createHourly
/* public void createSalaried()
nameField.requestFocus();
//String name = nameField.getText();
double payRate = Double.parseDouble(rateField.getText());
double hours = Double.parseDouble(hoursField.getText());
empArray[empCreated] = new HourlyEmployee(nameField.getText(), payRate, hours);
currentEmp = empCreated;
empCreated++;
enterButton = new Button("add");
}//createSalaried*/
looking forward your kindness

Visit YAT-Yet Another Thread this is a discussion using the Sun book Core Java 2
and one part in that book uses an example with Employee class of which I assume you are stealing your class-name from. Anyway, that thread is in the Java forums.

Windows script needed for the following tags

hi ,
I am currently automating a web task using windows script.
For the below source script , i need wsh script
<td title="Export Report" class="ui-pg-button ui-corner-all" style="cursor: pointer;" jQuery1404898744838="556">
     <div class="ui-pg-div">
             <span class="ui-icon ui-icon-newwin"/>
                        Text - Export
From the above script,
I need to click the "export"
Please anyone guide me to form a WSH script for clicking the "Export"
So far my code is
Set IE = CreateObject("InternetExplorer.Application")
Set WshShell = Wscript.CreateObject("Wscript.Shell")
IE.navigate "url"
IE.Visible = True
Wscript.sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_ddl_datefilter4").focus()
WScript.sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_ddl_datefilter").SelectedIndex=4
WScript.Sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_txt_fromdate").value = "30 Jun 2014"
WScript.Sleep 10000
IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_txt_todate").value = "04 Jul 2014"
WScript.Sleep 10000
IE.Document.getElementbyID("a_genslasummary").click()
WScript.sleep 10000
Thanks in Advance
Naveen

There is nothing to click on export. It is just text. YOu also cannot click on anything that does not have an event associated. Many events ae hidden in JS code.
None of the objects in your HTML have IDs so they will not be easy to find.
¯\_(ツ)_/¯

Logic needed for the following data

Hi All,
I have procedure in that I am calling a cursor to fetch the records. This query is returning the following data
DI
SZ
DII
CWT
Top
down
9 1/2
9.625
8.921
36
18
1602
13 1/2
13.375
12.515
61
19
1962
18 1/2
18.625
17.755
87.5
20
503
26
26
24.75
105
20
103
9 1/2
9.625
8.835
40
1602
3858
7
7
6.276
26
1683
6352
I want to print just these values ..
9 1/2
9.625
8.921
36
18
1602
9 1/2
9.625
8.835
40
1602
3858
7
7
6.276
26
1683
6352
As you can see in these values top and down are overlapping.
I tried several ways to sort the query on the fields and have some logic, but I am always getting one row extra which is not overlapping.
Can someone please give me the logic to get the desired result through conditions in Procedure/function/package
Thanks

BrendanP wrote:
26    AND t.top
"AND t.top....."... what?
Here's another solution, giving the least overlap over the greatest distance...
SQL> ed
Wrote file afiedt.buf
1 with data as (select 1 id , 18 top, 1602 down from dual union all
2                select 2,19, 1962 from dual union all
3                select 3,20, 503 from dual union all
4                select 4,20, 103 from dual union all
5                select 5,1602, 3858 from dual union all
6                select 6,1683, 6352 from dual
7               )
8 -- -------------------------------------------------------
9 -- END OF TEST DATA JUST USE QUERY BELOW AGAINST OWN TABLE
10 -- -------------------------------------------------------
11      ,idealpath as (
12         select id, path, idpath
13         from (
14               select id, path, idpath, cmlt_diff, min_diff, cvrg, max_cvrg
15               from (
16                      select x.id
17                           ,x.path
18                           ,idpath
19                           ,to_number(y.column_value) as cmlt_diff
20                           ,min(to_number(y.column_value)) over (partition by cvrg) as min_diff
21                           ,cvrg
22                           ,max(cvrg) over () as max_cvrg
23                     from (
24                           select connect_by_root(id) as id
25                                 ,down-connect_by_root(top) as cvrg
26                                 ,ltrim(sys_connect_by_path(prior down-top,'+'),'+') as cmlt_diff
27                                 ,ltrim(sys_connect_by_path(top||'-'||down,':'),':') as path
28                                 ,ltrim(sys_connect_by_path(id,':'),':') as idpath
29                           from   data
30                           where connect_by_isleaf = 1
31                           connect by nocycle top between prior top and prior down
32                                      and not down between prior top and prior down
33                          ) x
34                          ,xmltable(nvl(cmlt_diff,'0')) y
35                    )
36               where cvrg = max_cvrg
37              )
38         where cmlt_diff = min_diff
39        )
40 --
41 select d.id, d.top, d.down
42 from   data d
43        ,(select level l, to_number(regexp_substr(idpath,'[^:]+',1,level)) as id
44          from   idealpath
45          connect by regexp_substr(idpath,'[^:]+',1,level) is not null) bp
46 where bp.id = d.id
47* order by bp.l
SQL> /
        ID        TOP       DOWN
         1         18       1602
         2         19       1962
         6       1683       6352

How can I point the premiere to a blank folder and bring only the files needed for the project

When I start premiere it loads all files from all my photo/video libraries (app 150 gb almost 20,000 photo). I do not want to sort thru all these files for a project. How can I point premiere Elements to a blank folder and get the appropriate media for a project as I
need them.

As Steve points out, there are really three programs in the Premiere and Photoshop Elements "suite," PrE, PSE and then Organizer, which links between the two, and is an Asset cataloging program. Because of the commonality of the GUI (Graphic User Interface), there can be confusion as to exactly which program one is in.
If you launch just PrE, and not Organizer (can be launched from within either PrE, or PSE), the only Assets/media that you will see is that, which you have Imported into your Project.
Also, having the Assets for a Project, in a separate folder, or folder structure, is a great way to set up the Project. This article goes into details on one set up method: http://forums.adobe.com/message/4491450#4491450
Good luck, and hope that helps,
Hunt

I have downloaded the two files needed for the upgrade of Adobe Photoshop Elements 8 to version 12 but I cannot open them to make them run and install. What am I supposed to do. One is a very large .7z file just over 1gb in size.

How do I open up a .7z file just over 1gb in size? I have just downloaded this as an upgrade from Adobe Photoshop Elements 8 to version 12. I cannot see any sign of the Akamai program on my computer that is supposed to open and install the two files that I downloaded.

Thanks Hans
I don’t mind mountain climbing but anything serious to do with a computer scares me silly.
I installed the 64 bit version of 7zip and once I figured out how to tell the computer to use the right application within that to open the 7zip file, the big file opened and I was able to apply the .exe file to get things going and installed. In the end the default location the installation chose was program files x86 which I think is the 32 bit folder but it all seems to be ok now.
Many thanks again for your response.
Cheers
Peter

What solutions would be needed for the following scenario

I have a client who operates two companies.
One company manufactures a specific piece of equipment.
The other company rents, sells and services this piece of equipment. This equipment consists of three major interchangeable components.
They need to track:
Customer information u2013 company name, contact person, start date, end date, sold or rental unit, service schedule on the three major components.
Equipment information u2013 where it is, which components it consists of, service records, forecast of service requirement, data on each specific component.
Job information u2013 field tickets, work orders, distance traveled for installations and service work, how long units have been running.
Revenue information u2013 all pertinent information as well as what was billed and when.
Inventory information u2013 all pertinent information as well as which parts have been used by manufacturing and which parts have been used to maintain the rental assets or service on sold equipment.
They also want to automatically contact operators and client about upcoming service dates.
My expertise is in SAP HR. Which SAP modules would they need to accomplish this? Is there another solution they should consider?

They need to track:
Customer information u2013 company name, contact person, start date, end date, sold or rental unit, service schedule on the three major components.
SD Modules
Equipment information u2013 where it is, which components it consists of, service records, forecast of service requirement, data on each specific component.
PM Modules
Job information u2013 field tickets, work orders, distance traveled for installations and service work, how long units have been running.
PM Modules
Revenue information u2013 all pertinent information as well as what was billed and when.
SD Modules
Inventory information u2013 all pertinent information as well as which parts have been used by manufacturing and which parts have been used to maintain the rental assets or service on sold equipment.
MM Module
They also want to automatically contact operators and client about upcoming service dates.
CS Module

What are the files needed for downloading the MSS -BusinessPackage

Dear Gurus,
Any body can give me a suggestion for downloading the MSS -BusinessPackage ,and also what are the files needed for the deployment -its in a urgent basis and reward points welcome!
regards,
S.Rajeshkumar

Hi Rajesh,
You have to download and deploy the following through SDM (for NW04s/EP7),
1. Business Package for MSS (contains roles,worksets for your Business Package)
2. PCUI_GP (WebDynpro Component)
3. SAP_MSS (WebDynpro Coponent - your MSS application files)
To use ESS and MSS in Conjunction, you also have to deploy Business Package for Common Parts.
Backend SAP systems should have SAP HR and SAP FIN configured.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm</a>
Thanks,
Vamshi

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to

Would like to purchase PSE 12 to process Camera Raw files for the following cameras: Nikon D800, Nikon DF, Canon G9 and Pentax K-3 does the Raw Converter that comes with PSE 12 when purchased recognize the cameras listed in the question or do I need to download the camera Raw Version 8.3 ?

While the G9 RAW files can be read by Adobe Camera RAW and Lightroom, these file are unsupported at this time. Here is a link to Adobe's latest list of cameras that are supported and this list came out yesterday http://www.adobe.com/products/photoshop/cameraraw.html
I have not done a comparison between Lightroom and Canon's software but others have and say that Canon's software is clearly better. I am sure when Adobe updates their software again to include the G9 it will be a very good RAW converter as it is will most other cameras.

Need driver for the following . . .

Hi,
I have been hunting and can't seem to locate drivers for the following hardware id:
PCI\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01
Its there in the device manager as an unknown PCI device.
this seems to be the realtek card reader, and having gone trough other threads, I have tried 3-4 versions of the realtek card reader drivers. None of them have worked.
My laptop is a HP Pavillion n210se. The technical support/manual/drivers link on its product page is broken.
http://www8.hp.com/emea_middle_east/en/products/laptops/product-detail.html?oid=6762356#!tab=feature...
Can't find the model in the support/drivers download section of the global hp website.
How do I get the card reader to work? (assuming the unknown device is a card reader)
This question was solved.
View Solution.

Hi
Please find the link given below select Network and download the driver.
Driver Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Version wise for the following files

Hi All
I need to know what versions for the following files,Can any one suggest me how to get the versions,and where do they belong to, whats there functionality.
- POXWPA1B.pls
- POXWPA4B.pls
- POXWPA5B.pls
- POXWPA6B.pls
- POXWPA7B.pls
- poxwfpoa.wft
- poxwfrqa.wft
Thanks,
Praneeth
Message was edited by:
user590499

Login as applmgr user and issue one of the following:
$ cd $PO_TOP/patch/115/sql/
$ strings -a <file name> | grep Header
Or ..
$ cd $PO_TOP/patch/115/sql/
$ adident Header <file name>
For more details, refer to Note: 125922.1 - How To Find Oracle Application File Versions
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=125922.1

I just updated to 10.8 Mountain Lion. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password. It's a real PAIN!

I just updated to 10.8 Mountain Lion from 10.7.5. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password? It's a real PAIN!

I'd think you have a Keychain problem (Keychain storing passwords and the likes).
When you are being asked, are you offered the checkbox, "Remember this password in my Keychain"? If so, check and see if it stops asking.

Variable Substitution need to define pay load for the following structure

Hi All
Please help me for defining the pay load for the following structure for the Variable Substitution
for genearing the file dynamically fro the payload
Target structure is like this
MT_RFQ_IND_IDOC_MYSPACE_TARGET............> my message type
    <HEADER>
          < FileName>
          <INDI>
          <RFQNO>
          <DOCUTYPE>
   < ITEM>
          <FEILD1>
         <FEILD2>
         <FEILD2>
please help me
thanking you
Sridhar

Hi,
should this var1 given in any data type of my IR - No
in variable substitution, in value give the complete thing which i said above in italics i.e. payload:MT_RFQ_IND_IDOC_FILE_TARGET,1,hEADER,1,FileName,1
which user you used for CPACache refresh - it can only be done by XIDIRUSER.
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Feb 6, 2009 7:34 AM
Edited by: RAJEEV GUPTA on Feb 6, 2009 7:35 AM

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

Similar Messages

Maybe you are looking for