Driver for canon imagepass J1

Does anyone know if there is a driver for de imagepass JI from canon with 2880 printer-copier in snow leopard???
thanks

EFI have posted an update utility for 10.6. You will see from the release notes on the page that this updater is for EFI print controllers using System 6 architecture or later. I believe the imagePASS-J1 and imagePASS-G1 are both System 7 architecture so this should work for danbolta and sighop.
The update changes permissions on the PS3 folder located in ./Library/Printers/Canon.
Here is the link to the download page.
http://services.efi.com/support/drivers/download2.asp?oem=efi&sys=Applemac_osx106&ver=NA
Pahu

Similar Messages

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
It does not look like the Canon driver has change from Mavericks to Yosemite.
If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
If you have a new or clean install of Yosemite, see > OS X Mavericks: Set up a printer

OSX Yosemite driver for Canon LBP3000

OSX Yosemite driver for Canon LBP3000 needed. When will one be available?

Hi smukhi!
I will be glad to assist you. The driver is now available for the commercial release of the OS X 10.10 (Yosemite) driver. I recommend uninstalling the previous driver before installing the latest driver. To uninstall the driver, please follow the instructions below:
1. Click the [Printers & Scanners] icon in [System Preferences].
2.Select the printer you use on [Printers], then click [-].
3. Delete the printers that are registered, then close the [Print & Scan] dialog box.
4. Open Finder application of your Mac OS X.
5. Select [Go] → [Go to Folder] from the menu bar.
6. Enter the following folder locations, click [Go], then delete the files and folders.
Delete Example: You can delete files and folders by dragging them to the [Trash] icon in the Dock.
Location
Files and folders to delete
/Library/Printers/Canon/
CUPSCAPT
/Library/LaunchAgents/
jp.co.canon.CUPSCAPT.BG.plist
/Library/Printers/PPDs/
Contents/Resources/
Delete all the following files in the folders.
CNMCxxxAUS.ppd.gz
(xxx is a model name starting with [LBP].)
When the [Authenticate] dialog box is displayed
Enter the administrator's name and password, and then click [OK].
7. Close all open windows.
8. Restart your computer and empty the Trash Bin.
The printer driver is uninstalled.
Next, go to the imageCLASS LBP6000 - Drivers & Software page, and then download the file CAPT Printer Driver Ver.3.67 for Mac OS X 10.5/10.6/10.7/... listed under the [Recommended for You] section.
After installing the printer, please follow the instructions below to add the printer:
1. Click the [Printers & Scanners] icon in [System Preferences].
2. Click [+].
3. Click [Default], and then select the printer to be used from the printer list.
4. Select [Select Printer Software] from [Print Using].
5. Select the printer to be used from [Printer Software], and then click [OK].
6. Click [Add].
7. Make sure that the printer to be used is displayed, and then close the [Print & Scan] dialog box.
The printer registration is now completed.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can't install win7 scanner driver for canon pixma mp260, help please !!!

can't install win7 scanner driver for canon pixma mp260, help please !!!

HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

Missing raw file driver for Canon S90

I miss raw file driver for Canon S90. The software delivered with the camera works, but it doesn't work in finder, Aperure and so on, just in Canons own software. When will the driver be available for SL?

Apple hasn't said anything about it, but they're always quiet on everything (I think this works to their advantage for new products, but it works to their detriment for product updates.)
Anyway, they recently released the latest Camera RAW update and surprised a lot of people by not including the S90. Adobe had problems with the S90 -- images would "load" but looked poor. I can only guess Apple also had problems and decided to push it to a later date rather than hold up the whole stack of RAW camera updates people had been waiting on (typically they release an update with support for a list of cameras).

Driver for Canon MPC190

I cannot find a print driver for the multi machine (scan/print/copy) Canon Smartbase MPC190 (not on Canon support nor on Apple). Apperantly it doesn't exist. Would there be anybody out there knowing about a developped driver for this, or if any other driver might fit?
I'm using 10.2, 10.3 and 10.4 version on my Mac's (yes, I will upgrade them soon to the same
Thanx all/Pär

EFI have posted an update utility for 10.6. You will see from the release notes on the page that this updater is for EFI print controllers using System 6 architecture or later. I believe the imagePASS-J1 and imagePASS-G1 are both System 7 architecture so this should work for danbolta and sighop.
The update changes permissions on the PS3 folder located in ./Library/Printers/Canon.
Here is the link to the download page.
http://services.efi.com/support/drivers/download2.asp?oem=efi&sys=Applemac_osx106&ver=NA
Pahu

PPD, PS, or UFRII driver for Canon Printers (C5035)

I admit posting this here is a little bit out of frustration, but getting support from Canon is horrible. We have an imageRunner Advance C5035 witha fiery controller. I am unsure what driver we should be using - PPD, PS, or UFRII. There's little information on the support page on which one to choose.
I was told recently I had to get the separate fiery controller driver from EFI (http://w3.efi.com) which I did. I installed the newest driver for Mavericks from Canon and the printer just prints lots of pages with one line of garbled characters at the top.
Any of you with Canon enterprise printers have any ideas?
If I use the latest driver I get an icon that most resembles our multifunction printer. If I use an older version, the icon looks more like an old desktop laser printer.

PAHU wrote:
The driver "Canon iR-ADV C5000s-B1 PSV1.0US" with the Fiery Features menu is the correct driver. But I did expect you to have a different icon, as EFI has updated their drivers and now use a printer icon with their logo. I will post an image of that icon when I get to work later today.
As for the drivers that do not have the Fiery Features menu, they are the Canon drivers for the internal Canon controller in the imageRUNNER copiers. When you selected to add and saw the two models after entering 5035 as the filter, the one listed with PS in the name is the Postscript driver and the other one is the UFRII driver. The UFRII driver does not work at all with the imagePASS controller, as you have found. And the Canon PS driver, even though it is Postscript and the imagePASS supports Postscript, is not compatible. So you must use the Canon iR-ADV C5000s-B1 PSV1.0US driver to print to the ADV C5035 that has an imagePASS-B1 attached.
It sounds like you are able to print fine using the B1 driver. Do you have an issue with using this driver?
No I don't. I've had so many various issues with Canon drivers that I sought to use the latest driver and was dumbfounded why I can't use the latest 4.2.0 with OS X Mavericks. So it seems that the only working driver is the version 2 one, an older one. Some people in the office oddly have only had success using the OS X generic printer driver; again why I was hoping to get this newest one working or rather trying to figure out why it's not.
Here's the icons I have - tope one is older version 2 driver that works. Bottom is version 4.2.0 driver that doesn't work properly.
Thanks anyway.

How to install Windows 7 64 bit driver for Canon i9100 Printer?

When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver. Visiting the Canon website, I find an update module for the Windows driver. Canon says the printer MUST be installed using Windows Updater before their driver update can be installed. I have tried everything, but I cannot get Windows to find a driver. Windows Updater says that my computer is Up To Date.
What am I doing wrong?
Thank you,
David

Hi Honeycutt,
The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update. Please try Microsoft's web page for assistance with troubleshooting this:
http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can't use correct driver for Canon MF4140 USB printer shared by Windows XP

Hi all,
I have a Canon MF4140 printer connected to my Windows XP desktop machine via USB. The printer is shared and I can see it over the network with my MacBook running OS-X 10.4.
I've downloaded the OS-X version of the printer driver from Canon, but I can't select it when adding the printer in OS-X, so I can't access any of the printer settings. I've selected the generic driver but that doesn't allow me to do double sided or 2-up printing.
Is this because the printer driver does not support network printing, as the printer doesn't have a network interface?

I guess this isn't clear on the iFelix page. To use any of the built-in network printing protocols on OS X, you must either have a postscript printer (postscript printers don't require a driver, just a PPD), or a driver that works with the CUPS system (a CUPS driver). So far, Brother is the only non-postscript printer manufacturer that provides CUPS drivers. For every other non-postscript printer, you need a third-party CUPS driver. Apple tried to get around this issue by including Gimp-Print drivers (open source CUPS drivers), but your model isn't in Gimp-Print. You can look around for other CUPS drivers, but Lexmark hasn't been cooperative with driver writers. Here are the CUPS driver sources:
http://www.linuxprinting.org/macosx/
http://www.easysw.com/printpro/
http://www.printfab.net/
You may find it easier to share from OS X.

Windows 7 64-bit driver for Canon Digital Rebel XT

How do I interface my Canon Digital Rebel XT with a computer running Windows 7 64-bit?

You are correct. Canon does not provide a driver for Windows 7 64-bit. You have to change the communication mode in your camera and then use Windows Photo Gallery or other software to transfer the photos. Here is the response that I received from Canon tech support (it works):
"To connect your camera to a Windows Vista or Windows 7 computer, you'll need to change the communication mode.
To set your camera up for this, please do the following:
With the camera disconnected from the computer, turn the camera on. Press the "Menu" button. Now select the [Wrench, Hammer, 2] tab. Scroll down to "Communication" and press the "Set" button.
Select the [Print/PTP] and press "Set". This process is more completely described (and illustrated too!) on page 121 of your Digital Rebel XT Instruction Manual.
Now connect your camera to your computer and turn the camera on. Your computer should now recognize and have access to your Digital Rebel XT.
Unfortunately, Canon software cannot communicate with the Rebel XT when operating in this mode.
You may download your pictures using Windows Photo Gallery, or you may use a card reader to download images. If you haven't already done so, you may retrieve and install this program from Microsoft's download.live.com."

Unable to install a software driver for Canon film scanner on mac OSX 10.6

I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Need help with driver for Canon Selphy CP810 osx 10.8.3

I need help to get my Canon Selphy CP810 running .
Could not find a driver that works on the WEB.

Here's a driver from Canon for 10.8.x.
Clinton

64-bit Twain driver for Canon Canoscan 8800F

The twain driver for my Canon Canoscan 8800F doesn’t show under File-->Import in Photshop Elements 13. In Photshop Elements 10 this was not a problem. I have searched on
the internet and the instructions I found only applies to older version of Photshop Elements.
What should I do? I use a PC with Windows 8.1 64-bit.

Hi Stefan,
TWAIN plug-in: The plug-in is no longer available on 64-bit Windows computers.
Please see check this document.
Photoshop Elements Help | What's new in Photoshop Elements 13
Regards,
Sandeep

Hp psc 950 printer only prints black and white, no driver for Canon lpb 5000

Hi everyone,
I am trying to install my two printers on mac book pro.
Problem 1.
My HP psc 950 printer is only printing in a bad black and white quality - no color at all?? - any idea where I can download a printerdriver that is actually up to date? The one mac book has preinstalled seems not to be the right one?
Problem 2.
My may can´t find a driver for my other printer Canon LPB 5000 at all. I´ve already downloaded the canon drivers for Mac book - so I see a long list of Canon drivers but the LPB 5000 is not there and I don´t find any download of it in the web. I work with os x 10.7 and there is just an old mac driver for 10.6 to be found on the Canon website. I downloaded it but still does not work.
Hope someone can help. Both printers used to work fine on Windows but I am changing to Mac now and need to get them work.
Thanks,
K.

Canon LPB5000 driver for 10.7 is at http://support-au.canon.com.au/P/search?model=LASER+SHOT+LBP5000&menu=download&f ilter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E7
There is also this note: When using with OS X Lion, install this printer driver, and then register the printer. For information on how to register ... support-au.canon.com.au/contents/AU/EN/0100359005.html

Driver for canon imagepass J1

Similar Messages

Maybe you are looking for