Driver for USB 2.0 on Master2 FAR7 ?

I am getting really slow transfers on USB and suspect I am running at USB 1.  Does anyone know where I can find the latest driver ?  I searched the MSI site but could not find it... I seem to have misplaced the CD that came with the board.
BTW, my replacement MB came and everything is working fine now.

I have 2 usb cables connected together making 30 feet.  That is the problem.  15 feet works fine, so i probably need to get an active cable instead of a passive one.

Similar Messages

  • Driver for USB SB live! 24 bit exter

    I left my CD at home in Hong Kong and now I'm in the USA, so would any body tell me where could I get the driver for USB SB li've! 24 bit external?
    Thank you very much, I'm really sad as I just bought something new and can't use it.

    jkiang,
    The driver is not available for download at the moment. You could check with Direct Sales Department if they have the CD for order. Their phone number is -800-998-000 and it is option #. They are open from 9:00AM to 6:00PM (CST) Monday to Friday.
    Jason

  • Need Chipset Driver for USB support

    Hi.
    This Windows XP-SP3 PC has 4xUSB2 or 2xUSB3 on-board ports, and all have failed. All USB devices are yellow-flagged in device manager.
    I have run SFC \SCANNOW and it runs to completion, and I have tried right-clicking on a yellow-flagged USB entry in Device Manager and selecting Update Driver, but that only results in the following dialog:
    Cannot Install This Hardware
    There was a problem installing this hardware:
    Universal Serial Bus (USB) Controller
    An error occurred during the installation of the device:
    The driver installation file for this device is missing a necessary entry. This may be because the INF file was written for Windows 95 or later. Contact your hardware vendor stop
    It has been suggested to me that I should try to obtain the Chipset Driver for USB support. Running Speccy reveals the following about the mainboard:
       Manufacturer   MICRO-STAR INTERNATIONAL CO.,LTD
       Model   MS-7267 (CPU 1)
       Version   3.0
       Chipset Vendor   Intel
       Chipset Model   i945P/PL/G/GZ
       Chipset Revision   A2
       Southbridge Vendor   Intel
       Southbridge Model   82801GB (ICH7/R)
       Southbridge Revision   A1
             BIOS
             Brand   American Megatrends Inc.
             Version   V7.1
             Date   9/02/2007
    Can you help me out with this?
    Thanks very much.
     - Rosie

    here you can find all drivers for your mobo:
    http://www.msi.com/support/mb/945GCM5F_V2_FSB_1333.html#down-driver&XP 32

  • Driver for USB Serial Parallel Adapter

    Hello,
    I have a ThinkPad X100e with Windows 7 pro and I would like to connect an USB Serial Parallel Adapter (IBM).
    My system don't recognize this device and I don't find a driver for it..
    Can you help me ?
    Thanks
    Have a nice day

    http://forums.lenovo.com/t5/Options-Accessories/Us​b-to-Serial-Parallel-adapter-drivers-FRU-41A4955/m​...
    Read the last post on how to install it. See if that works for you.  I used it on an x32 with 7 ultimate and I'm running an old printer off of it.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Equium - Windows can't load the device driver for USB dongle

    I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
    what does this mean and how can i fix it?

    hi it's a vodafone 3gb cheap as chips dongle
    it's an equium a200 i think
    everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
    i know i sound completely stupid, but when it comes to technology i am!

  • Driver for USB Web-camera?

    I'd like to use a cheap web camera as an input device to Labview so that
    I can play with the image processing features.
    Does anyone have a driver for something like that? I've looked at the
    NI web site and I haven't found anything for USB. Lots of firewire, IEEE 1394,
    but no USB.
    Jim

    That's a joke, right? Very hard? Other that the very specific USB drivers
    that Iomega provides with their USB zip drives for WinNT, there are no drivers
    for USB for WinNT. There was some software developer down in India that
    allegedly had USB drivers for NT and like a fool I tried to use them. Zoowie,
    I get to reformat my hard drive. Complete and total system disablement (?)
    If you know of any USB driver for WinNT let us all know. I for one have a
    large financial and personnel commitment to NT and don't have any plans of
    switching to Windows 2000 any time soon.
    On Fri, 24 Nov 2000 12:05:53 +0100, "AIR Tech. Autom." wrote:
    >First, if your using Windows NT, it will be very hard to get USB to work.
    >
    >What we've done to get an image
    in LabVIEW, is this. We've made the PC a
    >webserver. We've used third party software to build a webpage with the
    >"webcam". We've used ActiveX to show the webpage in LabVIEW.
    >
    >Another way is: Use third party software to constantly update a .jpg. In
    >LabVIEW, check if the jpg is modified, load it, and display it. You'll get
    >some heavy 'flickering' this way.
    >
    >I've look at a way to use window API's to capture the image, but it isn't as
    >easy as it sounds.
    >
    >Regards,
    >
    >Wiebe Walstra.
    ===========================================================================
    SolidWorks Research Partner National Instruments Alliance Member
    Christopher Dubea Phone: (504) 847-2280
    Vice President of Engineering Fax: (504) 847-2282
    Moving Parts L.L.C. email: [email protected]
    P. O. Box 6117 URL: http://www.movingpart.com
    Slidell, LA 70469-6117

  • Need driver for usb serial bus controller

    the computer product number is QC455AV#ABA, usb device is listed as a Blackbeard product number is LR081AV.  The ID on the device manager is pci VEN 104C DEV 8241 SUBSYS 2AB5103C REV.   USB's not presently working. 

    Hi:
    You would need this driver for the hardware ID you posted...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-98056-1&cc=us&dlc=en&lc=en&...

  • Missing driver for usb port

    I received an alert to update my ipod software today which i accepted and i now no longer have a driver for my usb port

    SAME THING HAPPENED TO ME AND ALL BECUASE I WAS HELPING MY HUSBAND WITH HIS NEWER VERSION OF THE NANO THAT HE GOT FOR CHRISTMAS, NOW I CANT USE MINE!!!

  • G550 AHCi driver for USB/Floppy/CD

    Greetings,
    Where can I download the AHCi driver for Windows 7 x64 Home Premium for this notebook please? Lenovo G550. I'm trying to install there Corsair Neutron GTX, and Windows 7 x64 HP is unable to see the HDD, I tried plenty of drivers, but I always get faulty size of SSD, so they must have been wrong,
    Please advise,
    regards
    Bryan
    Solved!
    Go to Solution.

    Well, I solved it by putting Corsair Neutron GTX into HP ProBook 4540s, installing windows there and than reassembling it into G550.

  • NI-VISA as default driver for USB device with another manufacturer's driver?

    Hi Labview Developers or AE,
    I have read the tutorial, "USB Control Tutorial Device" at link.
    I read a paragraph "If you do not know the USB vendor ID and product ID, to get them, plug
    the device into the computer and allow the computer to recognize the
    new device. Cancel out of the Found New Hardware Wizard if it starts.
    Open the Device Manager from the Control Panel and find your device on
    the list, usually under "Other Devices". It may show a yellow
    exclamation mark indicating it is an unknown device. Double click the
    device to open the properties. Select the Details tab and ensure that
    "Device Instance Id" shows in the attribute dropdown box. A string of
    characters will be displayed similar to Figure 3. The four characters
    to the right of "VID_" and "PID_" are your vendor ID and product ID,
    respectively. Write down the characters for your device, close the
    Device Manager, and unplug the device from the computer. Alternatively,
    you can contact your device vendor to obtain this information."
    I am wondering if it is okay to install two drivers together and do labview with two of them simultaneously. I am using Advantech USB-4716. I installed Advantech driver so that I can use Advantech-labview functions to control and measure. unfortunately, , there's no advantech function like reset.vi  in case of problem reading. So I wondering if it is okay to use NI-VISA driver by wizard as mentioned above and advantech-Labview functions together. I have not figured out  how to reset Advantech USB-4716.
    Pls  advise. Thanks
    Clement

    Hi Nicholas,
    I found the drivers in those links.
    First of all the customer must install our Device manager ( DAQ Tool ) and Driver
    http://support.advantech.com.tw/support/DownloadSRDetail.aspx?SR_ID=1-246K8V
    That's he needs to do always before using our devices.
    For LabVIEW he also needs to install in addition the LabVIEW driver
    http://support.advantech.com.tw/support/DownloadSRDetail.aspx?SR_ID=1-29WTFD
    It is the LabVIEW or LabVIEW DAQ , it depends on customer LabVIEW software that he is using
    After installation he will get in LabVIEW ready made VI ( examples ) to use from Advantech and also the Manual

  • Driver for USB digital speaker?

    Last time I bought a set of digital USB speaker (...Pleomax PSP-7000W/Christal Edition). The description on the packing up was clear: Compatible with Microsoft Windows,..... and Mac 10.1 or later, driver disc included. When I wanted to install the driver, I found out, that there is only software for windows on the CD!!!
    The support of Pleomax/Samsung does not answer me. Is there anyone with an idea, if there are drivers for Mac - and how I can get them?
    Greetings from Thailand,
    DIETMAR
    G4   Mac OS X (10.3)   450 MHz PowerPC G4, 576 MB SDRAM

    Just plug them in, and make them the default output source in system preferences, I doubt you need any drivers. Windows needs drivers for every little thing, OSX does not.

  • Driver for USB 1608 G

    Hi everyone,
    I'm new on Labview and I want to acquire data from a usb 1608G from Measurement Computing. I can acquire data thanks to the ULx for NI Labview Library included in the usb 1608 G but I would like to use the Measurement & Automation Explorer...
    Unfortunately, it does'nt recognize the usb port... Is it because the usb 1608G is not a NI instrument? Is it because I don't have the correct driver?
    Thanks for your answers,
    Morgane CHARBONNEAU.

    Hello,
    If you have LabVIEW drivers for your usb device, why you want to use MAX for this?
    If you want to communicate using MAX, your device should fall in either USBTMC Class or RAW Class. Starting with version 3.0, NI-VISA supports USB communication for two classes of VISA resources USB INSTR (Test and Measurement Class) and USB RAW (class).
    More information will be available in http://www.ni.com/white-paper/4478/en/
    Regards,
    Naresh
    India LabVIEW Developer League member

  • MOVED: Need Chipset Driver for USB support

    This topic has been moved to Older MSI motherboards.
    https://forum-en.msi.com/index.php?topic=183437.0

    here you can find all drivers for your mobo:
    http://www.msi.com/support/mb/945GCM5F_V2_FSB_1333.html#down-driver&XP 32

  • Need driver for usb controller - windows 7 - HP Pavilion 15-n244sa Notebook

    Hi 
    I have installed windows 7 over windows 8 and my USB controller isnt working. The Hardware IDs are
    PCI\VEN_8086&DEV_1E31&SUBSYS_2186103C&REV_04
    PCI\VEN_8086&DEV_1E31&SUBSYS_2186103C
    PCI\VEN_8086&DEV_1E31&CC_0C0330
    PCI\VEN_8086&DEV_1E31&CC_0C03
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the usb 3 driver you need...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&sp...

  • Device driver for USB 2

    Hello,
    Still experiencing major problems with devices. I am a transcriptionist. I use a headset, foot pedal and mouse/keyboard, all plugged in the USB ports.
    While using all these devices I continually lose the function of my foot pedal. I deattached the keyboard/mouse, I was able to use the foot pedal. However, I still continually lose function with the foot pedal. It will work for awhile, but then it stops.
    I've tried everything. Checked my device manager, unchecked (under power management) not to shut power off to save energy. I have done ALL my updates with windows and hp.  Also scanned for hardware changes.
    My question is, if I purchased a POWERED hub port, would this help? I would like to be able to use the headset, foot pedal and mouse/keyboard (TOGETHER).
    I'm running out of possible solutions. Almost forgot, when plugging in the infinity foot pedal the device software does install.
    Please HELP.........Thank you.

    Yes it is almost certainly an issue with the computer's ability to provide sufficient power to its own internal usb hub and a powered usb hub will clear that up. You can also try going into the advanced properties of the usb root hub and reset the hub. But the powered usb hub is inexpensive and should resolve the issue. You are putting some pretty big power draw demands on the computer. 
    My "real" job brings me into frequent contact with court reporters and I see their equipment setups and most use some kind of usb hub for all their devices. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

Maybe you are looking for

  • It's not possible to switch on my Iphone 4

    It's not possible to switch on my Iphone 4 and also to charge it with two different cables. When I first uesed the phone its battery had 42%, so i don't know why it switcht itself off... Can you help me?

  • Sql performance test

    Hi, i'm dealing with a few statements. I think their speed could be improved and i'm doing some changes. The question is, as i'm launching these query a lot of time the data is being cached. Thus explain plans doesn't helps me so much.. Is there a wa

  • Component and hdmi issues

    So I wanted to see if I could send the ATV signal from both component and hdmi outputs. Currently, I am using HDMI only to my Pioneer Pro 1120 at the 720 setting, but I wanted to send the signal to another tv (with component only) as well. I could no

  • Can two datasources point to the same database?

    Can two unique datasource names point to the same MS Access Database?

  • I don't have permission to view the contents of hidden files on my own Macbook Pro

    I don't have permission to view the contents of hidden files on my own Macbook Pro. Im fairly new to Mac and for some reason I do not have permission to view the contents in hidden files. Can someone please help. Thanks