Driver installation help.

I just got my V570 back, so I was wondering if there were any drivers that I should download from first getting this machine. Not too familiar with drivers but I went and looked up the ones for this machine and there are a bunch. Thanks
Solved!
Go to Solution.

Hi Fearlessflyer3,
Is everything working okay now?
You just got it back.  From where?  Service?  What did they do?  When did you originally get your machine?
If everything is working okay, don't be too quick to update stuff.  If you go installing a bunch of updates and then something doesn't work right, you're not going to know which ones screwed you up.  
If you do decide to update drivers, set a restore point in Windows so if something gets messed up, you can go back to where it worked.
Did you burn restore discs yet?  If you didn't, do so, you'll be glad you did later on.  Do a full backup onto external media so you can be secure in the belief that you can get your system back to where it is now in case something bad happens. ie: failed hard drive, virus.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Free agent drive installation help

    When I try to reformat my external free agent drive I get an error message saying that it quit unexpectedly. Anyone know the problem?
    I can't use my drive until it is reformatted.

    That's not how you format the drive. Do the following:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

  • New Xtreme Gamer driver installation help Vista32

    hi,
    I just got a used xtreme gamer no driver CD. Can you please let me know what drivers i should use for these Daniel K's version from TPB or the new beta ones from Creative am really confused.
    thanks in advance!

    I tried installing the daniel_k drivers that worked before but now no matter what i do i keep getting this ****ing error(w8.1)
    Attached Images
    Untitled.jpg
    (5.4 KB, 3 views)

  • HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

    Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

    Did you partition and format the flash drive first? See the following:
    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
    sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
    Wait for the process to complete which will take quite some time.

  • Live! SB022x (or any OEM model) owners with driver installation problems ... [Help 'maybe' he

    Hi
    Problems to get 'drivers'/'driver updates' installed for your Li've! or other SB models on XP or W2k system?
    If ctzapxx.exe method didn't work either for you, have you tried 'forced' driver installation yet? If not here is what you can do.
    NOTE: THIS METHOD DOES NOT WORK W/ ALL DRIVER PACKAGES, BECAUSE OF THE USED INSTALLER IS NOT THE SAME (ctcomp.dat is not available on those)
    . download [url="http://members.aol.com/dvdking200/Pub/ctcomp.exe">this utility[/url]
    2. download driver package (or installation ISO/rip) you want to install and extract it to your HD (you can also install Audigy X drivers for your Li've! card if you like)
    3. run ctcomp.exe and point it to look from
    - ..\Audio\Setup -folder, found as a subfolder in folder you extracted the ISO/rip
    - 'main folder' (for. ex. AUD_EAX4DRV_0303) when you're installing driver update (data.cab must exist on that folder)
    4. press Patch button
    5. install your drivers by running setup.exe located
    - at same ..\Audio\Setup -folder when setting up from extracted ISO
    - at 'main' folder when you're installing driver update
    .jtp
    ADDON: ---------------------------------------------------------------------------------
    I tested what ctcomp.exe makes to this installation package and here are the results.
    INSTALLATION PACKAGE patched: Li'veDrvUni-Pack(ENG)
    SUPPORTED CARDS by installer
    BEFORE CTCOMP
    ;SBLi've!
    ;For CT4670, CT4620, M002/M003, CT4780, CT40, CT4830, CT4832, CT4870, CT4872, CT483, CT487, CT4760, CT4850
    [Hardware.Map3]
    ID = 00000020, 0000002, 0000002F, 0080022, 0080025, 0080026, 0080027, 0080028, 0080029, 008003, 0080032, 0080040, 0080050
    ProductName = Sound Blaster Li've!
    ;SBLi've! 5.
    ;For SB0060, SB000, SB002, SB00, SB003, SB005, SB022, SB0222
    [Hardware.Map5]
    ID = 008006, 0080062, 0080064, 0080069, 008006A, 008006B, 008006C, 0080065
    ProductName = Sound Blaster Li've!
    AFTER CTCOMP listed only Li've! and older series cards
    ;SBLi've! 5. : For SB0060, SB000, SB002, SB00, SB003, SB005, SB022, SB0222, SB0228, SB0226, SB0223, SB0229
    [Hardware.Map4]
    ID = 008006, 0080062, 0080064, 0080069, 008006A, 008006B, 008006C, 0080065, 0080066, 0080067, 00000, 000000A
    ProductName = Sound Blaster Li've!
    ;SBLi've! : For CT4670, CT4620, M002/M003, CT4780, CT40, CT4830, CT4832, CT4870, CT4872, CT483, CT487, CT4760, CT4850
    [Hardware.Map4]
    ID = 00000020, 0000002, 0000002F, 0080022, 0080025, 0080026, 0080027, 0080028, 0080029, 008003, 0080032, 0080040, 0080050
    ProductName = Sound Blaster Li've!
    ;For SBPCI 52 : CT4790, CT4820, SB050
    [Hardware.Map4]
    ID = 0080023, 0080050, 008007
    ProductName = Sound Blaster PCI52
    ;For SBPCI 256 : CT4890, CT489, CT4893
    [Hardware.Map4]
    ID = 008002A, 008002B, 0080033
    ProductName = Sound Blaster PCI256
    = No SB0220 support available? SO, IS THERE exactly a model numbered as SB0220 AT ALL?
    I think there is not.
    .jtpMessage Edited by jutapa on 07-04-2006 08:6 AM

    The reason i said this should be a sticky is that these boards move so fast that its impossiable for new comers to keep up with threads that have AWESOME tips that may or may not help but how many of us have accually gone through every post in the last 60 days to try and find a fix? I know I have not, but in the end you need to try everything you can.
    Something like this is not on the Creative FAQ data base so the only people to know about this possiable fix are the few who catch it in time.
    In my experience there is ALWAYS more than way to do things and 0 ways to get it to work with 20 other methods to run it. Thats a lot of ways to do the one thing. So unless we have a huge data base with every possiable fix,method or forceiable way to do something then more and more people will get really upset that Creative offer no help.
    Take the way Creative say to un-install drivers, man, this for the most part never works, so something like this may be the only way to get it to work for some people.
    What I do is though, I copy a thread like this one and will pass it on to others if need be. Ofcause with all credit to the original poster and I never pass it off as my fix and/work.
    I I like to cover every possiable aspect to do something. Ya know what i mean

  • Windows 8.1 bootcamp install fails at NVIDIA Driver Installer

    I've been trying to install windows 8.1 natively w/ boot camp on my Macbook Pro Retina, 15", Mid-2012 8gb Ram 2.3GHz.
    I had a few issues with partitioning and everything, but eventually got the point where the windows installer ran, allowed me to create my sign in, etc. Then it guided me through the quick boot camp installer for windows. Once this finished, a small window appeared stating to be the NVIDIA Driver Installer. This remained on the screen for a few moments, and then the screen went black and remained so permanantly. On a cold restart and reboot to the Windows drive, it starts right back up in to this black screen. I've already tried to clean install Windows 8.1 again, same problem.
    Thanks for your help!

    Welcome to Apple Support Communities
    If you can use Wi-Fi before installing the Boot Camp drivers, I recommend you to install the most recent NVIDIA driver from the NVIDIA website first > http://www.geforce.com/drivers/results/73784
    The Boot Camp installer installs an older version, so if you are having problems, it is better to install the most recent version, so the NVIDIA driver installation step will probably be skipped.

  • ATI Xpress 1250 Catalyst 9.3 Driver installation problem

    I have an ATI Xpress 1250 Radeon integrated graphics card on my laptop.
    The v9.4 drivers from the AUR crash my X and hangs with no keyboard/mouse interaction.
    The ATI driver website said the card required the 9.3 drivers which when installing gave this error:
    http://support.amd.com/us/gpudownload/l … ng=English
    [08:54][utils]$ sudo sh ati
    ati-driver-installer-9-3-x86.x86_64.run  atidriver/                               
    [08:54][utils]$ sudo sh ati-driver-installer-9-3-x86.x86_64.run
    Created directory fglrx-install.wdkccU
    Verifying archive integrity... All good.
    Uncompressing ATI Proprietary Linux Driver-8.593...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    ==================================================
    ATI Technologies Linux Driver Installer/Packager
    ==================================================
    which: no XFree86 in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/home/chillu/bin/:/home/chillu/bin/)
    Error: ./default_policy.sh does not support version
    default:v2:i686:lib::none:2.6.29-ARCH; make sure that the version is being
    correctly set by --iscurrentdistro
    Removing temporary directory: fglrx-install.wdkccU
    Help!

    tealson wrote:
    I'm not quite sure, but the ATI Xpress 1250 may have been dropped from the driver support list. AMD/ATI changed a few things there back one month or so.
    Apart from this you should not try the driver from amd but test this one from aur:  http://aur.archlinux.org/packages.php?ID=25105
    Thank you!!
    That was exactly what I wanted to know!
    I was using the catalyst 9.4 drivers in the AUR and was searching for the legacy drivers from the AUR.
    Thanks again! Will try and post the results.

  • Satellite A100-237: I do not have the Catalyst Control Center after driver installation

    Hello,
    I use a Satellite A100-237 laptop. 1.83 GHz Core Duo, Ati Mobility Radeon X1600 512MB Hypermemory, 1.5GB DDR2 RAM.
    My laptop now seems to use only the own 256 MB RAM (Graphic card's own RAM).
    I purchased Need for Speed Carbon and installed it to my laptop.
    When I tried to open the game, a blue screen appeared for less than 1 seconds, and than system restarted. Windows said that that was a critical error and a driver stopped Windows XP to operate, therefore system is restarted.
    I searched in the net for this problem and, people said that, when they updated the driver the problem is solved.
    I downloaded Display driver 8.241 (download file name: display_xp-8241.zip) from toshiba-europe.com.
    Driver installed but while installing ATI Catalyst Control Center, at a point the installation process stoped continuing. I had to end the task after a while.
    It said that driver is installed and system must be restarted.
    Now the game works, thats not the problem, however I do not have the Catalyst Control Center. (Where I recently use it for connecting other screens to my laptop)
    How can I solve this problem?
    Sorry for long letter,
    Thanks for helps.

    You may run the driver installer again, use the custom installation option and select Catalyst Control Center only. Alternatively, you may remove the entire driver and try re-installing again. I suggest you also download the notebook driver package from ATI's website instead of Toshiba, as their drivers are usually more up-to-date (although it might be less safe to use them, I don't know).
    And BTW, I have the same notebook and I have failed to see an option to set the machine to use the VRAM *only* instead of borrowing from RAM whenever necessary. Any ideas?

  • 32bit DIFx Driver Installer Error when Installing 9.0.2

    Never had a previous problem with iTunes and when I went to use it this morning, it crashes everytime. Uninstalled completely, reinstalled 9.0.2 and now I get an error "32bit DIFx Driver Installer" and iTunes "finishs" installing and crashes after opening again. Have tried unsuccessfully to figure out a fix for this. All my children got iPod Touches for Christmas and I got a brand new iPod nano and none of us can use them now. Please help!

    Hey guys! So, I experienced the same issues with the newest iTunes update. I updated several days ago, but I used iTunes for the first time since the update today. iTunes would load but immediately display a message that it needed to close. After several attempts to open iTunes, I reinstalled QuickTime as suggested by another website. Also suggested was trying to repair QuickTime and iTunes. When that didn't work, I removed both QuickTime and iTunes and did a clean reinstall from new downloads. When I did this, I got the 32bit DIFx Driver Installer error. It "finished" the install, but it still closed immediately upon opening. I ran Malware-Bytes and Hijack This to check for spyware/adware/mal-ware a few days ago so I was fairly certain my system was clean...but after two hours of trying to figure out this problem, I decided to go ahead and check for virus or malware.
    Indeed, I found six files (mostly located in the System Volume Information folder). After having Avast remove these files...iTunes successfully installed without the DIFx error! So much for being "sure" my system was clean. The files found were all related to the Win32:Malware-gen virus.
    So I suggest you check your system for malware and virus infection. I did my scan in safe mode and did the most in-depth search that Avast will perform. I highly suggest doing a full search with UPDATED virus program even if you think your computer is okay.
    I have had no issues with iTunes after cleaning my computer!

  • Windows 8.1 Driver Installation Order G510

    Hi,
    I was wondering if someone could tell me the proper order in which to install the Drivers for Windows 8.1
    Im using Lenovo G510 ( i5 4200M, Switchable Graphics Intel HD 4600 & AMD Radeon HD 8570M)
    My current order is:
    1. Intel Chipset
    2. Intel Rapid Storage
    3. Intel Management Engine
    4. Intel Video
    5. AMD Video
    6. Audio
    7. Lan
    8. Realtek Card Reader
    9. WLAN
    10. Touchpad
    11. Bluetooth
    12. Camera ( Not applicable because Windows 8 & 8.1 Already have that, installation says no capable hardware found)
    13. Lenovo Energy Management ( Currently using G510s Touch's because mine doesn't have a windows 8.1 version)
    I have experienced that even when I have installed the latest drivers ( Realek card reader in particular), Windows still shows a message in action center to install the latest drivers.
    Dell had an official post on installing order of drivers. I want to if it is different from Lenovo.
    I feel like Lenovo Energy Management and Realtek card reader drivers should be installed right after INTEL Chipset.
    Feedback?

    Unlike Dell, Lenovo doesn't really have anything documented on the order in which to install the drivers after a clean install of the operation system.  Unless one of the moderators know of an obscure listing somewhere.  Unfortunately, the documentation for your model is further limited as it only lists the use of the recovery disks which isn't helpful in your situation. 
    When I do a clean install I tend to rank the driver installation in order of importance.  First installing the drivers that are needed for the basic operating of the machine and from there move on to the lesser important peripherals.  From the looks of your list, it would appear you have done just that and that would be the order I would use.  
    In regards to the Windows Action Center Message, there is quite possibly an newer driver version available on the Windows Update website.  After your installation of the drivers I would visit the website and review their list for any driver updates.  I would then select just those for download and install.  Once all the drivers are up to date then I would revisit the website for the other OS updates they have to offer.    
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • Installation Help  - From 1.3 Beta to 2.0 to 2.1

    MacBook Pro under Leopard (10.5.2)
    I had installed BootCamp beta while running Leopard and am currently at 1.3 Beta.
    I am unable to install the 2.1 update (and have read the long thread also on this board).
    I have been running Parallels as well which I installed after I had installed Bootcamp allowing me either to boot into Boot Camp or run Parallels.
    Documentation indicates that I could insert my Leopard disk to update to Boot Camp 2.0 but after booting in XP SP2, the Boot Camp driver installation does not start automatically nor can Windows find the setup.exe file on the Leopard disk.
    I obviously cannot update to Boot Camp 2.1 without 2.0 and just am stymied at this point. Would rather not have to delete the partition and start all over again with the installation of my Windows apps and data.
    Any help would be appreciated.

    Thanks. MacDrive was the issue. All updated first to 2.0 and then to 2.1
    I'm embarrassed because as a columnist I don't usually miss these things. That one went totally by me.

  • SB X-Fi Driver Installation Problem (X-Fi does not install on Asus A8N-VM CSM

    Dear forum members,
    I want to install Soundblaster X-Fi Xtreme on my Windows XP x64 Professional computer, but i am not able to succesfully finish 64bit X-Fi driver installation. Whether i use newer x64bit X-Fi beta driver or older official x64bit X-Fi driver, the installation of the driver stops at the end of the installation, when "CTDVINST.DLL" file is being installed and MY COMPUTER REBOOTS instantly. After the reboot, i am being asked to install Soundblaster X-Fi driver again and again. So all the X-Fi software installs well, but when i want to upgrade to x64bit drivers downloaded from Creative web site, the installation process reboots my computer right at the end of it, when "CTDVINST.DLL" file (it seems to be the last file in the driver package) is mentioned.
    Help me please solve this problem, so that i can use my new Soundblaster X-Fi Xtreme on my computer soon.
    Thank you very much.
    Michal D.
    My computer specs: AMD Athlon 64 3200+ venice, microATX Asus A8N-VM CSM motherboard (socket 939, nForce 430), Seagate Barracuda 60GB SATA II 7200.9 hdd, LG GSA-467BRL DVD-RW, 2xGB DDR PC3200 Corsair VSGB400C3 dual channel memory, XFX gf 7600GT (PV-T73G-UDF3) graphics card, WiFi PCI card Asus Wl-38g, 420Watt power suply, Microsoft Windows XP Professional x64 Edition.Message Edited by misadlouhy on 06-2-2006 2:03 PMMessage Edited by misadlouhy on 06-3-2006 05:09 AMMessage Edited by misadlouhy on 06-3-2006 05: AM

    any help would be most welcome
    --------------->
    - new Windows installation did not help,
    - it is not caused by x64bit operating system, beacuse it did not install neither on Win XP 32bit
    - i tryed both driver updates (2 and 3) on both operating systems
    - i tryed to start driver installation from X-FI Driver\Drivers\Support\ctzapxx.exe, no change at all
    - i tryed to uninstall previous driver first through ctzapxx.exe as well
    - i tryed to install the driver on fresh installation of both Windows XP x64bit and x32bit
    driver installation reboots the computer just a percent before it should finish, allways, no matter how i try to install the driver
    i have heard about Creative sending to some owners of nForce430 motherboards new version of Sb X-Fi, which works with nForce430, is it true?Message Edited by misadlouhy on 06-3-2006 05:23 AMMessage Edited by misadlouhy on 06-3-2006 05:24 AM

  • DYNEX eSATAII ExpressCard Driver Installation

    I have two 1TB external HD I'm trying to connect to my MacBook Pro. When I run the Driver Installation Utility provided by DYNEX for Mac OS the installation fails and I get the following message "Run preflight script for SIL3132 Mac OS X Driver. Contact the software Mfg for Assistance"
    Has anyone out there run into this problem and developed a solution? Your help would be appreciated!

    Hello and Welcome to Apple Discussions...
    Check out this thread: http://forums.macrumors.com/showthread.php?t=586712 There's a link provided for a driver. No guarantee but you can try.
    You can contact Dynex here for customer support: http://www.dynexproducts.com/t-contact.aspx
    Carolyn
    Message was edited by: Carolyn Samit

  • Ignore driver installation

    Hi,
    I am facing a problem about how to ignore driver installation during my labview testing.
    My units under test are having different product ID, and the installation driver is using .inf file as attached.
    The problem is, after every single unit is connected to PC, window request to install the driver.
    Is there any way to make the installation can be done once enough for all units under test?
    Example: create a registry file to ignore the driver installation for other units.
    How labview can do it?
    Thanks.
    Attachments:
    Driver.zip ‏2 KB

    Hmm. I guess at the moment I will leave it the way it is,
    since these messages have stopped after all users had logged
    in. For sure it will start again after the next image-update
    I make, I will then test with sp4 and if there are any more
    options (digitally signed software i.e.) to be set to
    ignore. I will the report back here, probably with a new
    thread. Thanks for helping so far.
    Sincerely
    Karl
    >>> Kai Reichert<[email protected]> 27.07.2004
    03:28:22 >>>
    >[email protected] wrote:
    >
    >> I did not disable it locally, I disabled it only in the
    >> grppolicy I apply with the users. And yes, the policy is
    >> applied, since all the other settings (hiding drives
    >i.e.)
    >> works out as set up.
    >>
    >> Since the drivers in question come from microsoft
    >(extracted
    >> from win2k) and for this reason are supposed to be
    >digitally
    >> signed, this scenario with installation local to lpt1:
    >would
    >> not be an appropiate test.
    >
    >Not really. When you upload the signed drivers the part
    >that contains
    >the "signature" is not uploaded. NDPS does modify the inf
    >files as
    >well, so they would loose this signature anyways.
    >I was justtrying to see if you can disable the signature
    >option at all
    >
    >>
    >> Could it be win2k just sitting on sp2-level?
    >Have you tried if one of the machines will work when being
    >at SP4 ?
    >
    >--
    >Regards, Kai Reichert
    >Novell Support Forum Sysop
    >
    >I cna ytpe 300 wrods pre mniuet!!!

  • Deskjet 1015 driver installer not open

    Printer: Deskjet 1015
    OS: OSX  10.9.3  Mavericks  (Macbook air 11inch mid 2012)
    Hello. 
    I have just bought Deskjet1015 and have been trying to install the driver which I downloaded from here .
    Since my OS is OSX 10.9.3, I follow the instruction in this article .
    My problem is that driver installer named " HP Deskjet 1010 series" in image file with the same name doesn't open, even with "control key"  &  clicking "open".
    Here is the screenshot when trying to open it.
    Please help !!
    This question was solved.
    View Solution.

    Welcome to the forums Hirocg,
    I saw your post about your installation issue with your Deskjet 1015 on Mavericks. I do have some suggestions that might help!
    1. Try the download again and save the file to your Desktop and run it from there to see if that works.
    2. If #1 fails, try Repair disk permissions and try the installation again.
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • Fields in the parameter trans., of OB52 are not in the same order as OB52

    Hi All, I have created a Parameter transaction for the OB52 transaction. When i execute the transaction the "to account" field is showing before "From account" field. where as in OB52 "to account" field is present after "From account" field. How can

  • Is it normal for your iPod touch 4th gen screen to come off on its own?

    So I have had my iPod touch for a while now. I understand that things get old and fall apart eventually, but what confuses me is how does the screen come off on its own? I noticed it a few weeks ago when I was reading a book that some light was able

  • Access Forms In linux

    HI experts, IS der any way to access oracle applications forms in RHEL 4.6.. Apps Version 11i Edited by: user8849936 on Mar 17, 2010 4:04 AM

  • Troubleshooting of report delivery

    Hi Experts, we would like to have some help with report troubleshooting. We have set up reporting and it works correctly for some reports/queries. Others generate a generic error when handed back to SCL. E.g. we can trace the request which is handed

  • Not sure about third-party plug-ins when sharing a session

    I need to send the Logic 8 arrangements to a guy who will mix that, but in several projects I used 3 free plug-ins, like TalBAssline, StormGate, I really don't want to change them now as the whole sound concept will be broken..Can my co-producer just