Driver Intel USB 3.0 Driver for Intel 8 and U/Y Series doesn't work with a specific Kingston USB

Hello guys, just the other problem I'm facing with the 840 G2
I'm working in the MDT image for the HP 840 G2 and I would like to comment you one problem that I found with the USB 3.0 drivers. Based in your webpage, the last HP USB 3.0 official drivers are:
Intel USB 3.0 Driver for Intel 8 and U/Y Series Products
3.0.1.41 A from 15 dic 2014
I have found that those drivers doesn't work properly; if you insert a Kingston DTSE9 (32GB) the content of the usb will not be accessible randomly. The event viewer will display:
The driver detected a controller error on \device\harddisk1\DR13
To solve this problem you have to obtain the last version of the drivers from the Intel webpage:
https://downloadcenter.intel.com/download/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Control...
I have all the drivers properly installed and it seems that the computer is working fine, however I'm a little worry thinking if I should update all the driver to avoid possible problem like this one.
If you have found similar problems it would be nice to share it.
Thank you very much.

Hi,
Please use the following post:
http://h30434.www3.hp.com/t5/forums/replypage/board-id/General/message-id/76373
Thanks.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

I'm looking for the old toolbar that doesn't double post the web adress and only has single line entries and the extension xpi doesn't work with my new computer

Mike wrote:
> Could someone tell me why this prototype-based lightbox
seems to work on one
> of my sites but not on the other?
>
> I literally took the exact same .js & css files,
copied them over from one
> site to the other, but it's only partially working on
the new site.
>
> Works :
>
http://www.roxanacampagiorni.com/
>
> Doesn't work :
>
http://www.vilverset.com/sample.html
>
> Been troubleshooting this one for days, and I'm stumped.
Script wants
> nothing to do with lightboxing HTML files on the new
site. Only straight
> JPGs. But it was written to work with them, and it
*does* work with them
> just fine on the *other* site.
>
> Where is the anomaly between the two sites that's
causing it to break in
> sample.html?
>
>
Not sure if this is relevant but on the page that works you
have these
js files linked - 4.....
<script type="text/javascript"
src="/scripts/jscripts.js"></script>
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
and on the page that doesn't - 3......
<script type="text/javascript"
src="/scripts/prototype.js"></script>
<script type="text/javascript"
src="/scripts/effects.js"></script>
<script type="text/javascript"
src="/scripts/control.modal.2.2.3.js"></script>
HTT
chin chin
Sinclair

Publish for Approval - the new plug-in - doesn't work with Leopard

This aperture plug-in arrived for download just a few days before Leopard arrived. It worked great with Tiger. It doesn't work at all with Leopard. It appears that Leopard comes with a new version of Apache Server and it doesn't work with the Publish for Approval plugin. Does anyone know if and when an update will be released?

I'm not seeing the Java plugin in the plugins list in the System Details list.
Did you install the 32 bit Java version?
Do you see the Java plugin in "Firefox/Tools > Add-ons > Plugins"?
*https://support.mozilla.org/kb/Troubleshooting+plugins
*http://kb.mozillazine.org/Java

Lenovo X131e doesn't work with Prolific PL2303 based USB to Serial Adapter and Windows 7 x64

This is sort of a bug report. A Lenovo X131e with Windows 7 x64 and the PL2303 driver including 1.6, 1.61 and 1.7 will not successfully install the driver - Windows always reports "Driver Install Failed" on plug in to USB 3 or USB2 ports. However, putting a USB2.0 hub inbetween the USB to Serial Adapter and either USB port type makes the adapter work fine. This was not the case with the X130e. I'm not sure where to report this beyond this posting, but more of an FYI.

If the USB can be used for other equipment,
That may be compatibility issues for USB and Prolific PL2303.
Don't plug Serial Adapter when installing the driver,
Ofter installation, Connect serial adapter to see whether it is working normally.
I am a volunteer, don't work for Lenovo. I am a software engineer.
thinkpad x61t, os:win7 Awavo Software com port monitor serial port monitor

Translation for OVS and auto-validation texts doesn't working.

Hello SDN!
There're two issues with translation.
First issue arised in OVS screen. I always get english text (I mean "Advanced search" and text for buttons) although my Webdynpro DC was created with russian language. Also only russian language set in browser. As I know it's impossible to change standart text in OVS but it could be displayed in other language.
Second issue arised in auto-validation. We have a node element which type came from dictionary of imported ARFC model. For example this type is a date. So when user entered invalid date (i.e. 30.02.2010), auto-validation processed and show error message that entered date has unappropriate format. Auto-validation is a great tool but error message displayed in english. But my requirements are that such messages of auto-validation must be displayed in russian language... Is it possible?
We're working with SAP Web AS 7.0 SP 17
regards, Lev

Hi!
Thank you for answer.
I tried to deploy file attached to note mentioned in this thread, but I've got following error:
Summary:
========
There were 1 archives selected.
0 archives successfully loaded.
   Loading of 1 archives failed.
Details:
========
1) Error loading archive
    C:\WebDynproCoreComponentsNW04s.sda
    (server side name is: D:\usr\sap\J2E\JC00\SDM\program\temp\WebDynproCoreComponentsNW04s.sda)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the software component found in the manifest is either missing or incomplete!
Manifest attributes are missing or have badly formatted value:
the counter defined in the component element does not fit to the counter attribute
(D:\usr\sap\J2E\JC00\SDM\program\temp\WebDynproCoreComponentsNW04s.sda)
I think the reason is that version of my WebDynpro is 7.00 (7.0014.20071210061512.0000), but this note should be applied to 7.00 (7.0012.20070328122954.0000)

How can I get AirPort Admin Utility for Graphite and Snow 4.2.5 to work with OS10.6?

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method? Airport Utility doesn't see the device, despite repeated scans. My computer and iPad connect no problem to the device, but both iPod and iPhone won't take and hold an IP address. (If any one can help me solve this issue, I can live without access the Airport.)
Thanks,

I've upgraded to the latest version of Mac OS and now AirPort Admin Utility for Graphite and Snow 4.2.5 won't run. Any suggestions on how to either run this utility or otherwise get access to my old Snow Dual Airport via another method?
Unfortunately, you will need another Mac running a much earlier version of OS X to be able to install AirPort Admin Utility and make any settings chances to the router.
Since the normal life of a wireless router is around 5-6 years of use, now might be the time to consider a new router that will provide far better performance than the older Graphite/Snow AirPort.

I updated to firefox 9.0.1 and my yahoo mail doesn't work with firefox. This is a serious issue for me.

A few days ago I updated to firefox 9.0.1, and when I am using firefox in the My Yahoo account, I can see my emails, but when I click on one to open it, I am asked to put in my password for yahoo. This shouldn't occur because it already know who I am because I can see my name there and my emails etc. When I put in my password it doesn't accept it.

The location bar is also known as the address bar, it is where you enter web addresses.
When it crashes does it submit any crash reports? If it does can you post some of the crash report IDs as that may help somebody identify the cause of the crashes. For details of how to get the crash report IDs see the [[Firefox crashes]] article.

Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?

Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          6 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP11.005C.B08
SMC Version (system):          1.7f10
Hardware UUID:          00000000-0000-1000-8000-0017F2059956

It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage.
WD Caviar Green
WD Green 2TB
For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
WD Caviar Black 1TB 6Gb
WD Black Caviar 2TB
larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance. TimeMachine sometimes makes a poor backup method with some green cases.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

I have been dragging my files to a external drive to have a back-up for them and I lost some of my folders. They just went completely missing. I didn't delete them, and it was all stuff that I have worked on in the past month. How do I get them back?

I have been dragging my files to a external drive to have a back-up for them and I lost some of my folders. They just went completely missing. I didn't delete them, and it was all stuff that I have worked on in the past month. How do I get them back?

You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too.

How do I get a driver for KONICA MINOLTA C250 UV2.0.0 that worka with os 10.6.

Where do I find a driver for KONICA MINOLTA C250 UV2.0.0 that works with os 10.6.7 on my MBP

I googled, "C250" and come up with this web site:
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=831&fil etypeid=0
scroll 3/4 down the page. It's there. You can google too.

Just got new hard drive installed from apple and my old password doesn't work and it won't let me change it

just got new hard drive installed from apple and my old password doesn't work and it won't let me change it.cant install anything ,pls help,thx

Camera works. Now gotta find out about this mic thing

Internet doesn't work with Killer Ethernet driver installed! PLEASE HELP!

Hi guys,
First of all I might as well start off by saying that I recently upgraded my system to a new build, and so bought some new parts. The motherboard I chose was a MSI z87 gd65 gaming and by gosh is it good to look at, my only problem is that when I install the driver of the disc is that the Killer Ethernet driver doesn't allow me to get internet access (but I am connected to my router).
I have reset windows, reinstalled the driver, restarted my pc, made the bios default and it still persists not to work! I am not sure if it doesn't won't to work with windows 8 because I had to boot from the installation cd. I can't update to windows 8.1 either because I don't have the internet connect/access Nd I can't get another driver because of the same reason!
Has anyone else come across this issue?

Remove Killer driver and suite using >>Killer Cleaner<<. After reboot just install pure drivers: https://forum-en.msi.com/index.php?topic=174229.0

How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

Title says it all:
How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

Hi Auracles1,
Here's a pretty discussion regarding wireless printing with this device and a Mac.
http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-Officejet-6500-E 709n-wireless-issue/m-p/258853
I have a similar OfficeJet and it was a multi-step process. (1) Install printer drivers on the machine, (2) Add the printer queue in print & fax, (3) Run the "setup wizard" from the disc for wireless printing.

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Driver Intel USB 3.0 Driver for Intel 8 and U/Y Series doesn't work with a specific Kingston USB

Similar Messages

Maybe you are looking for