Driver uninstall/install help neede

Hi. I need some help with drivers. I have a SB Audigy 2 ZS, and I'm updating my drivers to the latest version, .85.55(thats what it says on the desktop icon) and EAX 4.0 Advanced HD. I have driver cleaner to clean up any remaning parts of the old drivers, and I know I need to install the EAX driver first.
But i don't know if I need to uninstall the EAX console I see in the modify menu for creative in Add/remove programs. It says I need to uninstall EAX 4.0 if I want to install new drivers, so do I need to uninstall this version of EAX? or do I just uninstall the windows drivers(the drivers for the sound card, I assume) that are listed in the menu and then install EAX 4.0 and then the new drivers?
Please be as detailed as you can be. Thanks very much.Message Edited by Hillbilly_37 on 07-3-2005 0:7 PM

Is the card a retail version, if it is not you cannot update from this site. If its a Dell PC its not a retail version.

Similar Messages

Driver uninstall/install help nee

hello, I need some help with the driver thing. just so you know, i have a audigy 2 ZS. I have a alienware computer and all the stuff in it came pre-installed. I have no disk for my creative card. it is NOT OEM. I have looked everywhere for this info, but havent found anything. I know i need to install the EAX 4 thing before the updated drivers. ialso know the safe mode driver cleaner routine to.
when you select audigy 2 ZS in the add/remove programs thing, a menu comes up asking if you want to modify, remove, blah, blah. I know i chosse modify, but then a menu comes up with all the components of the software for the card. the only one I found that might be the one i need to remove is the "windows drivers". i assume that this is it, but i want to be sure.
any help on this matter is appreciated. and any help on the installation would be helpful.
EDIT: I intend this to be a routine update, as i'm a gamer. these two updates are all i need, right? I found a reference in a thread to open AL stuff, so what about that? I also have doubts that the EAX4.0 advanced HD and the .84.55 are the most up to date drivers. they are really pretty old...Message Edited by Hillbilly_37 on 09-05-2005 0:55 PM

Hillbilly_37 wrote:
so its a CPU thing? not a mobo thing? what you said doesent really answer my Q. I hava a Nforce 4 mobo and a Athlon FX-55 64 bit CPU. is it asking for your CPU, or a mobo, or what?
NForce4 is a chipset type used on your ASUS A8N-SLI motherboard. You can find information 'bout chipsets by googling.
Athlon FX-55 64-bit CPU is a 64-bit processor. (!! one of the fastest ATM, BTW)
As an shortly addon to my previous post.
<i>Any i386 specific product (eg. 32-bit) can be used on your system if your system (processor/operating system) can operate in 32-bit mode too. If you use 64-bit operating system, as your system can operate with, then you (normally) need 64-bit drivers for your devices/controllers and 64-bit applications too (perhaps there is some sort of 6/32-bit emulator inside Windows x64, I dunno it).</i>
.jtp

WRT54G install HELP needed

I bought the WRT54G so I could go wireless in the house. I run the CD and it goes "do you want to replace your existing router or keep it?" Near as I know I DON'T HAVE ONE but that isn't an option, so which do I pick? There should be a "do you simply have a modem plugged into your PC and bought this go to wireless?" type option (something I'm betting is extremely common). Also, once you select one, you cannot go back and change your mind...you have to exit the program and start over. Which of these cryptic options do I choose??
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 06-15-2009 07:12 AM

Disregard - got help from an online tech spt.
FWIW that install CD needs work, as it was detecting a router that doesn't exist and the tech spt explained that sometimes it is known not to work properly.
PS: in the interests of hopefully saving someone else the time and hassle I went thru, here are the steps I was given which worked fine:
1. Connect the PC to the port one of the router then restart it. (This PC should be the one that can get online if directly connected to the modem).
2. Go to your desktop and double click on Internet Explorer or any browser(Located on the Start Menu in Windows XP).
3. When the browser opens, type http://192.168.1.1 on the Address bar and click on Go or press the Enter key. The log-in window will appear.
4. Skip User Name and type admin on the Password field, and click OK.
5. Configure the wireless settings. Click on the Wireless tab and have these:
Wireless Configuration: Manual
Wireless Network Mode: Mixed
Wireless Network Name (SSID): Bill/Anything that you would want to name your network.
Wireless Channel: 1
Wireless SSID Broadcast: Enable
Save the settings.
6. To secure your wireless network, Please click on the Wireless security sub-tab that is still under the Wireless tab and change the Security mode to WEP and have these:
Default Transmit Key: 1
WEP Encryption: 64 bits 10 hex digits
Skip the Passphrase field. Do not click on the "Generate" button.
Enter any 10-digit value in the Key 1 box. (You may use all numbers but you can only use letters A to F. No dashes or slashes and special characters). This will be your WEP key (MINE: ssn123123)
Leave Key boxes 2-4 blank or empty.
Save the settings.
7. Click on the Setup tab, then click on the MAC Address Clone sub tab, enable it and click on "Clone your PC's MAC" then save the settings.
8. On the Setup Tab --> Basic Setup sub-tab, look for the LAN IP which is 192.168.1.1.
9. Change the IP address to 10.10.10.1 then save the settings.
10. Connect the modem to the router's Internet port and wired PCs to the router's numbered ports.
11. Power cycle. To do a power cycle, please power off the computer, the router and then the modem. After 2 minutes, power on the modem, the router and then, lastly, the computers. Wait for the lights to stabilize before plugging the next device.
Message Edited by Bill12344 on 06-16-2009 08:34 AM

Ubuntu install help needed!!!!

i have ubuntu 6.06 dapper for my clamshell ibook. it is a live/install cd and i want to boot it and try it but it doesnt work. i have been waitng so long! i have os 9.2.2 installed. is ther any possibility of firmware being outdated? i don't know wich one i have. ubuntu livecd loads until its time to show the gui and it stays black on the screen.it makes two sounds and stops. if i press option command delte, then it takes me to the previous step( a list of things that loaded and the current step) then it goes on again doing nothing. if i cant try it out, how would it work installing 2 gigs worth with no gaurantee i like it? please help!!!! i want new software!

A swap partition is where Linux keeps its virtual memory. During the install process you should be asked to create a swap partition. You should make your swap partition 256MB. If you do not have enough memory to boot a GUI to install, you can boot the installer in text mode. When you are at the black yaboot screen type "help" and it will tell you what to type to boot the installer in text mode.
If you are planning on having dual boot with mac, you should boot the mac install cd first, partition the hard drive, and install mac. Leave one partition as free space for linux. I left half my drive for mac, and the other half for linux.
When you get to the partitioner, make all of your linux partitions from the free space. My advice is to create the yaboot partition first, that is a 800KB partition that allows linux to boot. Then create a swap partition, which should be 256MB or more. Finally make the rest of the free space a linux partition. It is important to remember what partition yaboot, swap, and linux are on because you will be prompted for them later. To refer to a partition, say the 5th partition it is /dev/hda5. That means the 5th partition on the first HD.
Hope this helps, and sorry for writing an essay :~)
iBook G4 14" 1.42 GHz 60GB 768MB 10.4.7 - Blueberry Clamshell 300MHz 20GB 320MB Preforma 630CD, LCIII, Compaq laptop 266MHz 5GB 192MB (GNU/Linux, NOT windoze)

ITunes .dll error. I can't use, uninstall, install iTunes - NEED HELP!

I can't even start up iTunes anymore. I get "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." I can get details on the error but it's all Greek to me. Any insights/thoughts? Your help would be most appreciated!
ibm t40 Windows XP Pro

If iTunes is crashing, why don't you send a crash log to those lazy Apple engineers.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log" If there's already a file there, it most likely has multiple crash logs in it (new crash logs are just appended to the end of the file). So, delete this file. This will make sure you're not sending extra information I don't need. These crash logs are text files, so you can open them in notepad or whatever to see what information you're sending.
So, get the machine setup to collect crash logs, do the thing that makes iTunes crash. You need to send that file to our buddy Roy. Make sure that you include:
(1) the drwtsn32.log file.
(2) the link to this thread.
(3) a one line description of your problem, i.e. "iTunes crashes on launch".
(4) the username that you're using here in the discussion boards.
Roy is getting a little swamped with messages and needs to make sure he gets all the information. And if he doesn't get that information, the message is just going to get dropped on the floor.

Need to reinstall Acrobat XI - cloud says it's installed - help needed urgently!

i am using osx / adobe creative cloud.
needed to deinstall acrobat XI. did it with app cleaner by mistake.
now acc tells me it is installed and i can not reinstall it again.
help urgently needed!
PROBLEM SOLVED
go to applications/utilities/adobe installers/acrobat XI deinstall (in my case)

Hi rbt_11,
Please go to
Applications --> Utilities --> Adobe Installers and check if you have any uninstaller for Acrobat XI.
Incase if you find the uninstaller then run that and uninstall the remnants of this software.
Thanks
Kapil

Using 2 drives in MBP - help needed please.

I have an 2009 Unibody MBP with a 320GB 7200 HDD, that's nearly full.
I want to instal 2 drives in it; one 60GB SSD for my applications and the OS, and one 1TB normal HDD for everything else (by removing the Superdrive). The idea being that the machine boots from the SSD for quick start-ups, while the HDD has all my data on it.
I need:
- 1x fast/quality 60GB 2.5" SSD, with dual drive kit/enclosure thingy.
- 1x 1TB 2.5" HDD. (I believe the only ones available this size currently run at a weird 5200 RPM?)
- 1x easy transfer/set-up method (to get apps/OS onto the SSD separately off my current single drive safely, then my data onto the new HDD).
- 1x Superdrive connection/enclosure for occasional external use of the DVD drive when I need it.
Questions:
(1) Is it best to set-it up as ONE drive partition, or have them as separate partitions?
(2) Will my 1TB Time Capsule be able to back both drives up easily, anything I need to do?
(3) Are there any downsides to doing this (yes, Applecare will not fix due to removing the Superdrive if future probs, but I can live with that)?
(4) Where in the UK can this be stuff be bought from, really need somewhere that offers help setting it up; videos and all.
In the US you have OWC (http://www.macsales.com ) who offer some great options, but I haven't found anywhere online in the UK offering a similar helpful package for the non-tech people. (importing from OWC would add £60+ import taxes I really don't want to pay - shame they don't have a UK operation :-|).
I know there are some cool tech people around here who know about this stuff, so really any other advice/links to help very gratefully received.

jimthing wrote:
(1) Is it best to set-it up as ONE drive partition, or have them as separate partitions?
For most purposes, the SSD and HD should each have only a single partition for normal use.
(Some folks put a copy of a heavy-duty disk repair app on a separate partition; and/or copy their Install disc to one via the Restore tab of Disk Utility; and/or install a different version of OSX on a separate partition.)
Be sure to have at least a minimal Admin account on the SSD.
(2) Will my 1TB Time Capsule be able to back both drives up easily, anything I need to do?
Yes. They should both be backed-up by default.

Really basic Install help needed, please.

Assistance would be greatly appreciated.
Yes, I've searched this whole forum and probably don't know enough to ask the right "search" questions because I haven't found the answers.
Over the past few months, I've been learning Linux as I now plan to switch from Windows to a Linux distro rather than go with a new computer and Windows 7 and the associated problems. I have tried several Linux distros individaully side by side with Windows XP on a partitioned drive.. Most recently I've been using Linux Mint 8 'Helena' and done lots with and to it. Linux Mint 9 'Isadora' was just released, and since upgrading for a non-rolling distro is a nuisance, I thought I'd try a rolling one. After review and recommendations, I thought I'd give Arch Linux a try. Since most of my computer use is music via a Jukebox (14+k files), browsing, email and info seeking, I don't need all the bells and whistles whith which many distros come. I'm not a gamer.
Basic Infor:
PC with 1.4GHz Athlon, 512 Ram, 320 G Hard Drive partitioned equally between Windows XP and Linux (hopefully Arch). High Speed DSL.
What I need are some really really basic instructions on a side by side install of Arch.
SOofar, I've got the clock set, and have partitioned my hard drive into
SDA 1 (my Windows Partition)(160 Gigs
SDA5 1200mb for my swap
SDA6 20 Gigs for the root
SDA7 130 (the rest) Gigs for home
What I need to know is darned near everything else.
Bootability for SDA5-7
How to label (the method for) SDA 5-7
and thereafter a step by step really simple set of install instructions for a side by side installation.
I've searched on this forum as well as via Google, but simple instructions are nowhere to be found. I really have had no trouble installing Mepis, Madriva, Ubuntu, and Linux Mint side by side with my Windows Xp partition and done so for at least 2 of them with manual partitioning rather than the automatic side by side install offered.
With this introduction, can someone point me to a Arch Linux side by side install for Dummies or help me with a walk through??
Or am I in completely over my head and need to just go back to Linux Mint and plan to upgrade every 6-18 months? Or try a different rolling Distro???
Thanks in advance to any and all who can help..
Dick

Willie,
Were I certain I would be happy with Arch, there would be no problem doing as you suggest. However, looking backover at least 2 decades, our first computer was an IBM with an 8086 chip and 20 whole MB of hard drive. The choice of operating systems was DOS. As we moved onwards and upwards, Windows 95, 98, and XP were Hobson's choice for PC users (our office computer used Unix). Now with more experience and research, a new world of operating systems is available, especially for those of us with older computers which would require major (and expensive) upgrades when possible to move to Windows 7. And as with Windows ME, 2000, and Vista, there is probably potential for significant problems with 7. Utilizing my current ability to have 2 (or more) OS's on my computer affords the opportunity to learn more about them and develop my 'geekiness" as well as to evaluate and selectively choose one which will best meet my needs.
As of now, I have at least 3 problems with abandoing Windows XP completely:
1) I haven't found a Jukebox program for Linux equivalent to J Rivers' Media Jukebox which has seamless track switching, an equalizer, and DSP studio effects,etc. I've used WINE doors and made it run on Linux Mint, but the program will not recognize my CD-ROM drives. I have some 14+k music files and my computer jukebox runs through my home sound system.
2) I've some 600+ movies indexed on Movie Organizer (movieorganizer.org) which flat out won't run on the Linux distro's I've tried. Re-entering those 600+ indexed movies to another program will be a bear. So far, no one of my local sources or on the other various Linux forums has a solution. WINE doors won't do it as it needs MDAC.
3) For all its frailties and faults, I'm reasonably literate with Windows XP. Linux OS's are still, quite obviously, relatively unfamiliar to me (3 mos experience).. So until I'm much more conversant with Linux, better the devil I know.
I have installed and used both the Linux Mint 8 Fluxbox and KDE editions on more than one computer so it's not a question of my being shy. BTW, I'm a retired internist, and our speciality is known for being really nitpicky, detail oriented, and investigational, and I'm sure it shows.
Again, thanks to all for the suggestions and comments. I'll keep in touch.
Dick

Planning - Workspace install help needed

I am newbie in Planning. I had a problem accessing Workspace..
I had installed and configured the Products in the following order
1) Shared Services
2) Essbase Client
3) Essbase Server
4) AAS
5) Planning
6) Reporting and Analysis. i think i installed client services
http://localhost:8300/hyperionplanning/
http://localhost:8300/hyperionplanning/appwizard.jsp
http://localhost:19091/awb/
Both are working fine
When i am not able to load either
http://localhost:19000/workspace/
or
http://localhost:19000/workspace/config
I have been working with planning using EPMA.
I know for that i need to install WorkSpace..But i did not find workspace @ Edelivery..I am jst able to see Some Flat files with name WorkForce..
I downloaded Hyperion Planning - System 9 Release 9.3.1 Microsoft Windows x86 Installer English and installed it for planning..
So can some one please help me how to install workspace..Or do i need to configure to get it running on my machine.
Or which file do i need to download to get workspace.
Thanks in advance..

hi dude ... i think even i have gone throuugh the same ..... c while installing the UI serviese make sure tht u deply apachi tomcat http server to all .. ie planning workspace etc which u can while confugrating the UI servies ..... better take care of confurating .....
For this first of all down wht MR hyperion guru Snadeep reddy said thoses 2 files and while confuration on UI servies pls do take care .

Oc4j standalone 10.1.3.3 and service registry with ssl install help needed

Hello,
I'm trying to install service registry with oc4j standalone for testing and demoing but am having some difficulty with the ssl side of things.
I have setup a oc4j standalone 10.1.3.3 and configured the following ports:
default http port: 9991
ormi port: 9992
ormi ssl port: 9993
https port: 9994
I have configured oc4j standalone for SSl as per instructions by copying default-web-site.xml to secure-web-site.xml and added secure="true" to <web-site> tag and added <ssl-config keystore..../> as well. I've also modified server .xml and added <web-site path="./secure-web-site.xml" /> into the file.
I have then installed service registry as a publication (discovery) with http port pointing to 9991 and ssl enabled pointing to 9994 with oracle database.
I can load http://localhost:9991/ and also https://localhost:9994 and both secure and non-secure page loads fine for the oc4j webpage. I can load http://localhost:9991/registry/uddi/web/ page but when I click on any of the link on it tries to load https://localhost:9994/registry/uddi/web i get a http 404 not found error.
Tried googling and searching the forum for info, but I'm in need of a little help on where I went wrong.
Thanks

Hy frank, thanks for your reply:
We use a jdk shipped with jdeveloper for running OC4J;
"<JDev install dir>\jdk\bin\java.exe"
java -version says:
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-b05)
Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)
Regards.
Davide

Windows 7 Adobe Air Uninstall problem - Help Needed

I can't uninstall Adobe Air from my control panel or manually from the cmd prompt [AdobeAIRInstaller.exe -uninstall] I get an error box that
says that the Adobe Air Installer has stopped working.
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Adobe AIR Installer.exe
Application Version:    2.7.1.19610
Application Timestamp:    4e3c2b43
Fault Module Name:    mlang.dll
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5bda21
Exception Code:    c0000005
Exception Offset:    0000bbff
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Here is my install log:
[2011-08-02:01:11:23] Runtime Installer begin with version 2.7.0.19480 on Windows 7 x86
[2011-08-02:01:11:23] Commandline is: -update "c:\program files (x86)\adobe media player\adobe media player.exe"
[2011-08-02:01:11:23] Installed runtime (1.5.3.9120) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2011-08-02:01:11:23] Installed app (com.adobe.amp.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1) located at c:\program files (x86)\adobe media player\adobe media player.exe
[2011-08-02:01:11:26] Relaunching with elevation
[2011-08-02:01:11:26] Launching subprocess with commandline c:\users\ratliff\appdata\local\temp\air2261.tmp\adobe air installer.exe -ei
[2011-08-02:01:11:28] Runtime Installer begin with version 2.7.0.19480 on Windows 7 x86
[2011-08-02:01:11:28] Commandline is: -stdio \\.\pipe\AIR_5572_0 -ei
[2011-08-02:01:11:28] Installed runtime (1.5.3.9120) located at C:\Program Files (x86)\Common Files\Adobe AIR
[2011-08-02:01:11:28] Starting silent runtime update. Updating runtime from version 1.5.3.9120 to version 2.7.0.19480
[2011-08-02:01:11:28] Installing msi at c:\users\ratliff\appdata\local\temp\air2261.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-08-02:01:11:29] Runtime Installer end with exit code 0
[2011-08-02:01:11:29] Elevated install completed
[2011-08-02:01:11:31] Launching subprocess with commandline c:\program files (x86)\adobe media player\adobe media player.exe
[2011-08-02:01:11:31] Runtime Installer end with exit code 0
[2011-09-06:09:04:13] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-06:09:04:13] Commandline is:
[2011-09-06:09:04:13] Installed runtime (2.7.0.19480) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-06:09:04:16] Relaunching with elevation
[2011-09-06:09:04:16] Launching subprocess with commandline c:\users\ratliff\appdata\local\temp\aira35e.tmp\adobe air installer.exe -ei
[2011-09-06:09:04:16] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-06:09:04:16] Commandline is: -stdio \\.\pipe\AIR_3156_0 -ei
[2011-09-06:09:04:16] Installed runtime (2.7.0.19480) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-06:09:04:17] Starting silent runtime update. Updating runtime from version 2.7.0.19480 to version 2.7.1.19610
[2011-09-06:09:04:17] Reinstalling c:\users\ratliff\appdata\local\temp\aira35e.tmp\setup.msi
[2011-09-06:09:04:18] Runtime Installer end with exit code 0
[2011-09-06:09:04:18] Elevated install completed
[2011-09-06:09:04:20] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-09-06:09:04:20] Runtime Installer end with exit code 0
[2011-09-06:09:04:20] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-06:09:04:20] Commandline is: -installupdatecheck
[2011-09-06:09:04:20] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-06:09:04:20] Performing pingback request
[2011-09-06:09:04:21] Pingback request completed with HTTP status 200
[2011-09-06:09:04:21] Starting runtime background update check
[2011-09-06:09:04:21] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update
[2011-09-06:09:04:21] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update to C:\Users\Ratliff\AppData\Roaming\Adobe\AIR\Updater\Background
[2011-09-06:09:04:21] Runtime update not available
[2011-09-06:09:04:21] Unpackaging cancelled
[2011-09-06:09:04:21] Runtime Installer end with exit code 0
I suspect this is causing a few of my other programs to crash as well.
Please Help!
Jamie

Hi Jamie,
The install log looks fine, but the last entry was September 9th. I suspect the crash is occuring before the new log entries can be made.
Could you please open a new bug report on this over at bugbase.adobe.com? We'll want to get a crash dump so we can try to figure out what might be causing this to happen. You didn't mention what OS you were running, but I found this tech doc on the net that describes how do generate the .dmp file:
Creating Dr. Watson crash dumps
Thanks,
Chris

Install SOA suite on top on an existing working MDM install - Help needed

Hi,
I have a working install with all components on a Windows 2008 server.
Jdeveloper 11gR1
Oracle DB 11gR2
MDM 2.01
OUAF 4.1
Weblogic 10.3
And now I need to install SOA suite 11g. When I did, Jdeveloper stopped working. I was able to revert back to a saved image.
So now that I will start over I was wondering if you know of any special setup conditions I need to pay attention to when I install SOA suite 11g on top of my existing install.
I hate to mess with that working MDM image now since it took me a while to get there.
Any help would be greatly appreciated.
Steve

Sorry for the late reply and thank you for yours.
Here are the versions I use:
Oracle SOA Server version 11.1.1.2.0
Build: 0
Build time: Tue Nov 03 13:48:58 PST 2009
Build type: release
Source tag: PCBPEL_11.1.1.2.0_GENERIC_091103.1205.1216
Oracle BAM Source Tag:ORABAM_11.1.1.2.0_GENERIC_091101.2156
C:\oracle\Oracle_SOA1\OPatch>opatch lsinventory
Invoking OPatch 11.1.0.6.7
Oracle Interim Patch Installer version 11.1.0.6.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : C:\oracle\ora112
Central Inventory : C:\Program Files (x86)\Oracle\Inventory
from : n/a
OPatch version : 11.1.0.6.7
OUI version : 11.2.0.1.0
OUI location : C:\oracle\ora112\oui
Log file location : C:\oracle\ora112\cfgtoollogs\opatch\opatch2011-06-25_14-37-03PM.log
Patch history file: C:\oracle\ora112\cfgtoollogs\opatch\opatch_history.txt
Lsinventory Output file location : C:\oracle\ora112\cfgtoollogs\opatch\lsinv\lsinventory2011-06-25_14-37-03PM.txt
Installed Top-level Products (1):
Oracle Database 11g 11.2.0.1.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.

Driver Installation Error, help need

Hi all,
I just downloaded the newest drivers for my Soundblaster Audigy ZS 2, WinVista 32 bit.
When I try to install, everything goes fine till an error occured (see screen)
Screen: http://img5.imageshack.us/img5/660/errordj0.jpg
Something with the APOIM installer, any help would greatly be appreciated. I already searched the FAQ and known issues etc.
Thx in advance, xGj.

Hey I had that same error but?I resolved it.. First download winrar, www.rarlabs.com, second install it and then right click that exe for your driver and click on extract all to that specific folder, for vista the default is downloads, and then just extract and run the setup.exe in that folder and not from the program that you have downloaded from the creative driver website. Worked for me it should work for ya also, Good Luck...

Flash Player install help needed; no sound.

I have installed Flash Player 3 times -- followed instructions - checked volume controls - but still no sound; only have video. It is the latest version. Help would be much appreciated.

Thank you for the guidance for what added info is needed to help solve these kinds of problems. I'm a first-time user of tech forums. I do believe I solved my problem by unistalling a previous version of Flash Player. I finally did get sound. Much appreciate. Bill

Uninstalling/Installing HELP!!!

When completing a recent upgrade to iTunes, I received an error message which said that iTunes needed to be uninstalled and reinstalled. When uninstalling, I didn't realize that there was a sequence to uninstalling all the components of iTunes. Now, I can't uninstall two of the components at all and I can download iTunes at all. My problem is not with my iPod, but since it's older than 90 days old, I have to pay for phone support. HELP!!!

Now, I can't uninstall two of the components at all
Which two components can't you uninstall, Kansas? What error messages do you get when you try to uninstall them?

Driver uninstall/install help neede

Similar Messages

Maybe you are looking for