Dropped frames during exporting

I have noticed that I am loosing frames when I export.  I have tried changing my settings to "Match Sequence Settings" and my video settings to "Match Source", but am still loosing frames, which is very apparent in my pans.  Any thoughts on how I should fix this?
I shot with a Canon 7D with my settings at 30fps.  I initially setup my sequence for 1080P 23.97fps, but have changed it to match the RAW video settings.

Just how did you change the sequence settings? Did you modify the existing sequence? If so, that might create some weirdness.
What I would try is (in the same project) create a New Sequence with the 1080p 29.97 settings, then Select All/Copy the edits of the original sequence and Paste them into the new sequence.
I recommend against using the "Match Source" business in AME, control the parameters yourself so you know what you will be getting on the export.
Also, what is intended destination for the export? Let's make sure you're choosing the best export options. The setting you chose is neither for web nor Blu-ray - what did you want to do with that file?
Thanks
Jeff Pulera
Safe Harbor Computers

Similar Messages

  • Help Please?  Dropped frames during capture!

    Hello everyone, I am capturing from a mini DV camera to FC Express HD using a fire wire. I've been doing this for a year and all the sudden I'm getting a "dropped frame during capture" message.
    I have read many many discussion boards and tried all of your suggestions...
    Using different camera's, different tapes, different firewire cables. I've uninstalled and reinstalled FC EX HD and Quicktime. I tried turning off my external drives and using the internal drive to capture to and created a FC project within the internal drive. I have plenty of space on all drives.
    Does anyone have any other ideas? Nothing seems to be working. I appriecate your help!!!!!
    G5   Mac OS X (10.4.9)   final cut express hd

    maybe you switch off the warn dropped frames during
    capture option... after that watch your clips... is
    there any problem still?
    I'm really worried now. I turned off the "warn dropped frames" option. After capture, when I playback, I get a warning that there are dropped frames, and then picture freezes. Help! I don't know what to do!
    G5   Mac OS X (10.4.9)  

  • Dropped Frames During Capture

    FCE HD is dropping frames during capture when I'm taking video from my Canon Video camera and the three DVD players I've been using. Any suggestions or ideas?
    Here's my info:
    - Didn't work for either of these setups:
    - Canon to my iBook G4 via firewire
    - DVD player to DVD converter via RCA cables to ibook via firewire
    - My external Harddrive (LaCie 230 GB) is hooked up to my laptop via USB Drive.
    - Easy setup configured to DV-NTSC or DV-NTSC-DV Converter dpending on capture device
    Thanks in advance for the help

    Hi Lisa,
    Well, for starters you probably have less free space on your internal HD than you did a year ago - rule of thumb is keep at least 15%-20% free space on your drives, especially your system drive; more free space is better. Couple that with the fact that USB really can't keep up with the demands of video and it's easy to get dropped frames.
    There's also the question of what else you've put on your machine since last year, whether or not you updated OSX or QT since then, if you have anything else running when you capture ... there could be lots of factors.
    Have you ever run a maintenance utility on your Mac - eg. MacOSXCocktail, MacJanitor, Onyx, etc ?

  • Dropped frames during capture attempt

    Hi,
    I keep getting dropped frames during my capture attempts. I am using a Canon Elura 70 as my playback deck which I realize is not ideal for log and capture. Can anyone one give me suggestions as to how to solve this problem?
    Thanx,
    John

    I'd try to borrow a friend's camcorder and see if that works which would isolate the problem to your Canon. As you're probably aware, it's very possible that the Canon is the source of the problem - especially if you're experiencing the problem with both the G4 and the MBP - I assume you're using at least FCP5.1.x?
    Are you daisychained through an external FW drive? Are you capturing to the system drive? You don't have any other apps open?
    Have you successfully captured with this set-up before? Have you tried changing the firewire cable?

  • Dropped Frames During Playback

    So I'm new to Final Cut Studio and have been trying to ingest footage from a SANYO digital file based camcorder. It records in several HD modes including full 1080i and in MPEG-4 file form. I've had trouble getting the files into Final Cut on my MacBook Pro and editing without constantly having frames dropped. I'm not sure what to do. Is it a problem with my computer (which is brand-spanking new)? Also, I get a warning when trying to Log and Transfer the footage telling me I have un-supported media. Any insight I can get on the issue would be excellent.

    FCP works best when the media you're importing or capturing matches the Sequence settings. Check your Sequence settings in FCP and see if they exactly match the settings of the clips you're trying to use. If they don't match, it may be best to convert them to match PRIOR to importing them, or use Sequence settings that match the clips.
    FWIW, when you get dropped frames during playback, it's an indication that the effort to read and display the clips is exceeding the ability of your system. This can be due to a number of things or a combination of things. Some of the conditions that can contribute to the problem are (in no particular order):
    • data throughput problems due to hard drive connection, buss speed or drive speed
    • using media made with a codec that isn't fully supported in FCP
    • using corrupted media files
    • RT settings not right for your system
    There are other conditions as well, but those are the most common.
    -DH

  • Dropped frames during playback & must render everything & tried everything

    This is an updated question. My last posting for some reason did not include everything, such as my System Settings, A/V Settings, and View Settings. There also was no Preview option. Hope it works this time.
    I am editing a multiple camera project with a lot of color correction (to get the cameras to match up), and photo montages with motion and image compositing.
    I am getting way too many dropped frames during playback, and I have to render every little thing, even simple dissolves. It's taking forever to work like this, and is extremely counter productive. I have tried all the obvious things, but nothing seems to be working. Please help.
    I have a 17 inch Mac Book Pro, using OX 10.4.8, processor 2.16 ghz, Intel Core Duo, memory 2 gigs, 667 mhz, DDR2 SDRAM.
    Using FCP 5.1.4, and Quicktime 7.1.3
    My external hard drive is a 300 gig Maxtor One Touch II, firewire 800, 7200 rpm, which is divided up into 3 partitions of 100 gigs each:
    First Partition - 12.79 gigs left (did not use for this project. Mac OS Extended (Journaled)
    Second Partition - 44.53 gigs left. Currently using now. MAC OS Extended.
    Third Partition - 47.75 gigs left. (Used earlier - had another project on it and ran out of space so I switched to the second partition. The other project is now deleted which left me 47.75 gigs.) Mac OS Extended (Journaled).
    Here are my current settings that may be applicable:
    - Tried variations of playback control: safe and unlimited
    - Tried variations of playback video quality: dynamic, high, medium and low.
    - Tried variations of playback frame rate: dynamic, full, 1/2, and 1/4
    - Record to tape is at full quality.
    - Play Base Layer only: Tried on and off
    - Monitor Color LCD 1280 x 800 millions, NTSC/PAL 640 x 480 60 hertz NTSC. There is only one ntsc setting which is 60 hertz, so I am unable to increase it.
    - User Prefs - Real time audio mixing is at 2.
    - System Settings
    Memory Usage
    Application 100% (1820 MB)
    Still Cache 10% (167 MB)
    Thumbnail Cache
    Disk 8192 k
    Ram 512 k
    - A/V Settings
    Sequence Presets
    Frame size - 720 x 480 pixels
    Edit timebase - 29.97 fps
    Field Dominance - lower even
    Pixel Aspect Ratio - NTSC-CCIR 601/DV
    Anamorphic - Off
    Video Processing - YUV allowed (8 bit)
    White Point - White
    Compressor - dv/dvcpro-ntsc
    Millions of Colors (24 bit)
    No Date Rate Limit
    No Keyframes Set
    Quality - 100
    Audio Settings
    16-bit 48.000 kHz stereo
    View
    Video Playback - Digital Cinema Desktop - Full Screen
    Sequence
    Render All - Everything is checked.
    I haven't increase my memory aloted to fcp yet, cause I'm not sure how do it with this version. The article that I found was for the older version. Would that help? If so, could someone tell me exactly how to do it?
    Well, that's it. Hope one of you experts out there will be able to help me out.
    Thanks
    Anneita

    Even if you use Dynamic as your playback setting, depending on the complexity of the edit or composite, you may still get dropped frames. Keep in mind that the weak link in this chain is the FW800 connection. You also mentioned that you using quite a bit of color correction as well as motion effects. Depending on the color correction, the more that you add to your sequence as far as effects are concerned, the more processing is required. The dropped frames that you are experiencing is most likely the computer trying to maintain realtime playback at the expense of the quality of the picture. In order to really judge the final result, you'll need to render.
    The official definition of Dynamic Playback:
    This option allows Final Cut Pro to automatically change between high,
    medium, and low quality as necessary to maintain real-time playback. In this case,
    the quality of the video resolution can change frame by frame.

  • Dropped frames during playback due to "slow disk"

    I work off an external Rocstor 160gb firewire drive; suddenly as I started to edit a project I get constant dropped frames during playback. It says it's due to "slow disks" and I wondered if my hard drive was dying. But I opened other projects on the drive and they play just fine. Why just this one? It's shot on the same format, captured the same -- nothing's different from my older projects. Maybe the captured media files got corrupted? I've never seen this. I've tried using the Rocstor on three different machines (first a 17" PB, then two different G5 towers) and it happens on all of them. I have FC5 on the PB, but FC6 on the G5s -- doesn't matter. I'm stumped here.

    How full's the drive? The fuller it gets, the slower it becomes. If it wasn't a superfast FW drive to begin with (especially a 400 device) You're gonna have problems as it gets fuller... starts slowing down big time around 70% capacity. It's always something... if the drive's not in a fast enclosure, and is also a fastish drive has a least 8mb disk cache, it will behave like this with DV footage.
    One thing I've seen and learned from reading a few posts on this is that the better/faster stuff suited for FCP use is worth the investment. G-Raid, Grainite Digital, OWC all sell really nice FW800 setups... they are up to twice as fast as older/slower FW 400 drives. and NEVER buy any more than you need now for storage. It's half the price and twice the speed next time you need more it seems.
    eSATA should be considered by any pro. laptop or not.
    Jerry

  • Dropping frame during capture

    Hi
    I keep dropping frames during capture. A message say "switch off unlimited RT" How do I do that and are there any other options. It had a new hard drive with bulk space still remaining

    No, "Safe RT" plays everything at the highest quality therefore if your computer is not fast enough you drop frames.
    Unlimited and Dynamic will reduce the quality of the played back video so that the computer can usually cope. (Note that when you output your finished project it will be at maximum quality).
    If you are struggling with FCE, download a couple of hours of free video tutorials here:-
    http://www.izzyvideo.com/learn-final-cut-express/

  • Ran Software Updates and Now Drop Frames during Playback

    I updated all of my Software back in late December. Since I have updated, all projects (old and new created ones) within Final Cut drop frames during playback. I had no issues with drop frames until I ran the Software Updates. Currently running Leopard 10.5.6, Final Cut 6.0.5, Quicktime 7.5.5. Any suggestions on how to determine why I now have drop frames. Is there an easy way to revert back to software that was in place prior to me running Software Updates on 12/22/08?
    Thanks in advance for your comments and suggestions.
    Jim Bob

    ZRose:
    First, you should have an up-to-date tested reliable backup. The best way to do it is to get an external Firewire HDD, clone you entire computer to is using SuperDuper, then keep it up-do-date.
    Next, get in the habit of doing regular maintenance procedures. Here are some links to help.
    Macintosh OS X Routine Maintenance
    Mac OS X 10.3/10.4: System maintenance
    Maintaining OS X
    For the probably immediately at hand
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    BGreg's suggestion to install the Combo update is a valid fix. Remember to Repair Disk Permissions before and after installation.
    Please post back with further questions or comments.
    Good luck.
    cornelius

  • Dropped frames during playback in FCP 7

    I have searched high and low, asked every FCP expert I know, and noone can help me.
    So I turn to this forum and you the users for help.
    I just upgraded from an old DVCAM to a new Canon 60D, which shoots full HD. Usually I never have problems editing with or without text, but all of a sudden I got dropped frames when I put text on my project. No warning of dropped frames though. Just some skipping and pausing before the clip continued.
    I was running FCP 6 but upgraded to FCP 7 in hopes of it removing the problem. It just got worse. Now I can't even playback video or text by itself (I am testing with 5-10 second bits). Whenever the screen should go blank I instead get the unpleasant warning of dropped frames. The same thing happens when I play text by itself or over the video. When I try exporting it (to see if it is just a playback error) QT and VLC Player both show the most hideous grey, green and pixellated versions of my (still very short) clip.
    And if anyone suggests changing RT options - where do I find those options? The RT button on my timeline only shows the options: "play base layer only", "use playback settings" and "Full quality" - and the problems keep showing up in all three selections.
    Could my settings be off? I am not sure I have found the right ones for the footy from a Canon 60D.
    I hope someone is able to help me with this. It is the most frustrating experience I have ever had through my many years with FCP.

    Switching from DV to HD can be a nightmare if you were 'getting away with things' using DV material that you really won't be able to in HD.
    First - Where is the media? If it is on the system drive of the macbook pro... get it off of there!! It should be on an external drive - FW800 will get you going better than anything else...
    Second - simple fix, but make sure... are any of your windows overlapping? is your canvas window set to FIT TO WINDOW? If there are scroll bars in your canvas or viewer that would be bad too.
    Third -- let's figure out what and how you are converting the material off the 60D.
    What is the workflow you are using? You should probably be editing in some form of Apple ProRes... I like the LT setting - minimal quality loss with max gain in bit rates.
    http://library.creativecow.net/articles/rossshane/tapeless-workflowfcp-7/video-tutorial
    Check out that video and see if it doesn't answer a few questions...
    Good luck,
    CaptM

  • Dropped frames during playback from timeline...help asap!

    I'm running Final Cut Express 4.0.1 (I've checked and installed latest updates) on a 24" Intel iMac (2.66 GHz Intel Core 2 Duo, 4GB ram) which I purchased on August 2009.
    Before I purchased my new iMac I would use FCE on my 15" MacBook Pro (purchased April '08, similar specs to my iMac) and it would work just fine.
    Now here's the problem with running it on the iMac...Everytime I playback any video from the timeline, it would immediately drop frames in less than 3 seconds (even without any effects or filters) and reveal an error window:
    "One or more frames were dropped during playback
    If this occurs frequently, try:
    -Turning off Unlimited RT
    -Lowering your compression data rate
    -etc..."
    However the video in the "Viewer" window plays back videos just fine. I've tried changing scratch disks from an external drive to the internal HDD (both of which are more than 70% free) to no avail. I used to always use Unlimited RT without a problem when I used FCE on my MacBookPro with an external drive. Am I missing a setting that I used with my MacBookPro? I've even opened FCE projects I made using my MBP, and the iMac drops the frames when I play them back.

    Here are some screen caps of the item info windows:
    http://img263.imageshack.us/img263/1696/screenshot20100608at115.png
    http://img43.imageshack.us/img43/1696/screenshot20100608at115.png
    I'm using an external HD, an Iomega 1.5TB - Mac OS Extended (Journaled). However it's USB and not firewire (which again wasn't an issue with my MBP). I've also switched to the iMac hard drive and the problem persists.
    Let me know of any other info you'd like me to pull up for you.

  • Dropped Frames During Capture! Please Help!

    I have tried capturing numerous tapes and I still get the same error message. "Dropped frames were detected during last capture attempt". I have only recently had this problem and I have read other threads saying that QuickTime could be the problem but I am running on QT v7.3.1 and Final Cut Pro HD 4.5
    I have my capture scratch set to a G-Raid 750GB external hardrive and I don't know what else the problem could be. Can anyone help

    could be the problem but I am running on QT v7.3.1 and Final Cut Pro HD 4.5
    That is your problem. QT 7.3 and FCP 4.5 are incompatible. The best version of QT for that version of FCP is QT 6.5. Unfortunately you cannot simply revert to the older version, as components and system files are installed all over. What you'll need to do is an Archive and Install of the OS...and DO NOT upgrade to QT 7.3.
    Shane

  • Dropping frames during playback.

    I've exported a 36" clip of animation from AE as a .mov file using the Animation Codec and imported it into FCP. The clip is about 330 MBs. I'm on a G5 w/ 4 GBs Ram. These are my settings:
    720 x 480 NTSC DV (3:2)
    NTSC - CCIR 601 / DV (720 x 480)
    29.97 fps
    Compressor: Animation
    Quality: 100%
    The clip plays perfectly until I add a slug or a cross dissolve at the beginning or end. At the beginning, a 2" slug plays through and then playback stops before the first frame of the clip and I get the Warning - Dropped Frames alert. If I place a slug or dissolve at the end, the clip plays all the way through and then stops right before the first frame of the ending slug or cross dissolve and I get the same alert. Anyone have any idea what I need to do to correct this problem?

    Shane, thanks for your reply. I did try (before I saw your post) not changing Final Cut's sequence settings to match the imported file (which it asked me to do) and the clip appears to play w/o a glitch now. The compressor setting for my default FCP sequence settings is DV/DVCPRO - NTSC. I understand now that the Animation Codec is only for intermediary use. Is this an approved way of converting from it so that I can work w/ the clip on FCP's timeline?
    Jack

  • Dropped Frames during digitize

    It's been awhile since I've had to trouble shoot, apologies if this is a novice question.
    Trying to digitize plain old miniDV through Firewire, nothing fancy, has worked consistently until today, when I received this error after two trys of the deck
    cueing up and trying to capture footage:
    "Dropped frames were detected during the last capture attempt"
    I've tried using different external drives as well as my desktop as the target drive to no avail.
    I ran Disc Utility on my main Mac HD, to no avail.
    I've checked other tapes, and I get the same error on everything. Even DV tapes that have worked in the past.
    Any insights or hints of what to check or change would be greatly appreciated.
    Thank you!

    ok more details.
    Capturing from a consumer Panasonic camera, using Panasonic tapes.
    Easy setup: DV-NTSC (NTSC 29.97)
    tried using Device Control FIREWIRE NTSC and FIREWIRE NTSC BASIC, neither worked
    there is enough drive space, and I have to run out and buy another FW cable.
    I'm just mystified, this set up has been tried and true for over a year.
    The only thing that is different is I updated the Mac OS to 10.5.6 and hope
    there is no correlation with that.
    thanks.

  • Dropping Frames During Capture; Noticed QT Update.

    Dear Friends,
    I have Final Cut 4.5, Lacie 500gig drives, use for DV industrial projects, typically capturing 1 hr tapes in 15 min clips. Then, at 5min30sec +/-, capture freezes and an error msg tells me frames were dropped during capture. I have tried every config to troubleshoot, including erasing one of the drives. Right now I can batch 4min clips, any longer and I get dropped frames.
    My last successful capture was on 10/22/07; QT updated to v7.3 on 10/23/07. I'm running OS10.3.9 and use a DSR-11.
    Everything else seems to be operating fine. If the QT update is the culprit, how do I fix this? Or is there a different solution? I just want my perfectly-running Final Cut system back!!
    Regards, Matt Alcorn

    QT updated to v7.3 on 10/23/07.
    Why did you do that? The most stable version of FCP 4.5 is with OS 10.3.9 and QT 6.5. Heck, even 7.1.6 works. BUT, why did you mess with a good thing?
    NEVER mess with a good thing:
    http://discussions.apple.com/thread.jspa?threadID=1275141&tstart=50
    Shane

Maybe you are looking for

  • ITunes is not recognizing my iPod so I cannot sync my music, but I can use home sharing and it will work... How do I make iTunes recognize my iPod touch?

    I've had my iPod touch for over a year now, and I haven't used it or iTunes in a while. I updated iOS on my iPod and updated to the newest version of iTunes earlier. Now that I have put some new music in my music library (not from iTunes), iTunes wil

  • Adobe CC and .flv export

    Hello, Yesterday, i tried to export some videos in .FLV format. It was a big surprise to see that those codecs don't exist anymore. Looking for some answers, i find this: After Effects CC 2014 (13.0), Premiere Pro CC 2014 (8.0), and Adobe Media Encod

  • Best practice?-store images outside the WAR file?

    I have an EAR project with several thousand images that are constantly changing. I do not want to store the images in the WAR project since it will take an extremely long time to redeploy with every image change. What is the best practice for storing

  • Restoring original sounds

    I had somehow edited the guitar sounds in GB and now when I'm in the sound library, only one guitar file appears... Acoustic Steel Strings. My question...How do I restore or locate the original settings and have the 20 or so instruments that were in

  • CS4 Video Integration problem!?

    I am working a website that needs me to place video files in. I've followed every tutorial out there, I've encoded my video file as a .flv, chose a skin, and placed it on my page. However, when I preview it or put it online, nothing shows up but a bl