Dropped my phone in water and now the camera doesn't work, any ideas why its' the only thing not working

I somehow knocked my iphone 4s in the sink of water and everything seems to work except the camera.  Is there a way to reinstall  the software or does anyone know what I can do other than using phone protection insurance?  All my pictures are there and they upload and share but just can't get the camera to take pictures.

The device is damage, it was dropped in water.  You are lucky that the device works at all.

Similar Messages

  • I recently downloaded FCP X and now FCP 7 won't open, any ideas why?

    All my projects are in FCP 7 but I am about to start usiing FCP X. Since I downloaded FCP X I am unable to open 7 from
    Applications or XML Files, please help.

    Hi Russ,
    I've tried all 3 of the instructions from the link you sent me. So I've uninstalled FCP X and Motion 3 times and re-downloaded it 3 times and the same thing happens with FCP 7.
    It boots up, right up until the part when the windows open on screen and then closes without leaving an error message.
    FCP X works fine... Unfortunately I have loads of projects on 7 that I need to complete before an(almost) complete transfer to X.
    Anny more ideas would be gratefully received
    Regards
    Steve

  • Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I dropped my phone in water and the headphone jack wont work anymore. Any way to fix that? and sometimes the sound will just stop working and i have to put in the head phones any way to stop that?

         I dropped my phone in water and know the headphone jack won't work. i will put the headphones in and sound will blast out and it sounds off. is there anyway to fix that?
    - Thank you!!!

    Make an appointment at the genius bar of your local Apple Store. Take your credit card.
    An out of warranty replacement is $199.

  • A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?

    A very good friend of mine dropped her iphone into water and now it is not working.Her husband recently passed away and text messages from him and from well wishers after his decease are feared lost. Is there any way to retrieve them?
    I suggested contacting Compub in Nassau St as the info is priceless and worth the trouble of trying to regain?
    Any thoughts? The poor lady is very distress

    If she has backed up her iPhone she can replace that iPhone and set up the new iPhone from her backup.
    You can put the iPhone that went into water into a plastic baggie with either new silica gel packets (preferred) or raw rice and let it sit for  4 - 5 days. After that time remove the phone and connect it to power for at least a half hour. While it is still connected to power reset it by holding down the power and hold button, wait for the Apple logo then let go of the buttons. Might take several tries. If it revives immediately back it up.

  • I drop my phone in water and it wont power back on

    I drop my phone in water and it won't power back on?

    Yes, that is very possible.
    Water and electronics do not mix. You'll most likely have to buy a new phone.

  • I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?

    I just upgraded to the new 5.0.1 software and now my Ipad won't sync, any ideas?

    Are you using ITunes 10.5? If so have you upgraded to the OS 5 software? Now it should tell you there's an even newer upgrade to the 5.0.1 when you try to sync your iPhone or iPad.  Hope this helps.

  • My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?

    My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?

    I had the same problem with my phone, its a 3gs, out of no where my laptop stop recognizing it and wouldnt charge either, i got worried because i had all my pix and videos on my phone and didn't have a copy, so i started searching on the internet for an answer to my issue, bought extra usb cables, used different laptops and nothing worked .. Untill i took my cell phone apart and thought about replacing the (charge port assembly for apple Iphone 3gs) so ordered the part online and 3 days later got it and i just replaced it right now... and guess what/??? IT WORKED!!! YEAP.. NOW MY CELL IS CHARGING AND I JUST SYNC MY STUFF.. I HOPE THIS CAN SOLVE YOUR PROBLEM... AND ONLY COST ME 8 DLLS

  • TS3999 I see all of my calendar events in iCal and on my iPhone, but not in the iCloud web app.  Any ideas why?

    I see all of my calendar events in iCal and on my iPhone, but not in the iCloud web app.  Any ideas why?

    If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on.  The iCloud calendars will then download to your phone.

  • Unable to back up external hard drive via Time Machine.  Says no room but has back ups from two previous Mac notebooks on it.  Tried deleting them and now can't do anything.  Any ideas?

    Unable to back up external hard drive via Time Machine.  Says no room but has back ups from two previous Mac notebooks on it.  Tried deleting them and now can't do anything.  Any ideas?

    As john noted, eventually that external is probably not going to be big enough, but it certainly is for now. The HD just needs enough capacity to cover the amount of data on your internal HD, not the internal HD's total capacity.
    Format/partition the external as follows and you should be set to go:
    1. Connect the external HD to the MBP.
    2. Open Disk Utility on the MBP.
    3. Select the external HD in the left pane.
    4. Click on the Erase tab.
    5. Choose the Format: Mac OS Extended (Journaled).
    NOTE: if you want to zero the HD (which I always think is a good idea, but does take time), click on Security Options, click the button for Zero Out Data, click OK. The larger the HD, the longer this will take, in some cases several hours.
    6. Click on Erase and wait for the entire process to finish.
    7. Click the Partition tab.
    8. Click on Volume Scheme: and choose the number of partitions (just one in this situation).
    9. Click on the Options button (located underneath the Volume Scheme pane) and select GUID.
    10. Click Apply.
    11. Quit Disk Utility.
    Backup your internal to the external. What application are you using to backup with? I highly recommend both SuperDuper! and CarbonCopyCloner.

  • I had my mac rebooted and now I can't find appleworks any idea where to download this?

    I had my mac rebooted and now I can't find appleworks any idea where to download this?

    "Rebooting" means restarting &, as fruhulda said, that won't cause things to disappear. If you mean you had the hard drive erased & the system reinstalled, you will have to find the original disk with the AppleWorks installer.

  • I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices.

    I have just changed internet providers from BT to Virgin, and now my iTunes doesn't show any of my airport express devices.  I assume that I have to reconfigure them to the the new wireless but how do I do this frmo my PC?  Thanks

    I would recommend that you start by performing a "factory default" reset on each of your AirPort Express base stations. Once completed, you can use the following Apple Support article to configure each base station for streaming.

  • I changed my setting to private browsing and now firefox won't open. Any ideas?

    I changed my setting to private browsing and now firefox won't open. Any ideas?

    In what way did it not open? Was the Firefox icon on the task bar?
    Did you get any error messages? Did the computer show Firefox
    as running?

  • HT204022 I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

    I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.

    OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
    Also I am assuming you have checked Finder - Preferences  - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

  • I have attempted to update a few apps and the install has frozen on 'waiting' not allowing me to either access the app or delete it, any idea why this has happened and how do I get around it?

    I have attempted to update a few apps and the install has frozen on 'waiting' not allowing me to either access the app or delete it, any idea why this has happened and how do I get around it?

    See if either of these things works for you. In the future ... Only update one app at a time. Forget that the Update All button even exists. It causes more problems than it does good - IMO.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.

Maybe you are looking for

  • Re: Unable to rebuild in mirrored RAID after hard drive failure BOOTCAMP

    CHRIIIIIIIS!!! Problem! first off, you're a genius. thanks for helping everyone around here. Second. I just installed Mavericks on my MacBook Pro 2012, and it broke Bootcamp. I have a 750GB hard drive and it has 2 partitions, on for Mac and one for B

  • Page size in pdf

    I converted a 1/4 page Word doc into .pdf but got converted as a full page.  I want it converted as the same 1/4 page.  How can I do that?

  • File attachments for multimedia (specifically flash)

    I am trying to provide flash content in a pdf document. The flash file itself is programmed dynamically, so that it gets its data from an xml file. It uses the ActionScript XML class to load the xml file. I need to attach the xml file and the flash f

  • The form template failed to load. IAssociation could not be found using criteria

    Hello, I'm using the project used in  the "TechEd OSP309 Session" to integrate CRM 2011 with SharePoint 2010. I successfully made the integration. I can create external lists in SharePoint, execute de CRUD operations and submit them to CRM. Also the

  • WDY_EXECUTE_IN_PLACE Parameters table

    Hi experts, i'm trying to call a webDynpro from SAPGui with function wdy_execute_in_place. This already works. But now i want to fill some fields within my webdynpro by calling it. in special i have built a selection screen with wdr_select_options an