DRQ: Check open purchase orders in Stock Data.
It´s a pray if you can click on a arrow in the Item Master Data under Stock Data in the Colum Ordered to see all open purchase orders for this Item. and the same for Commited to see the open seals orders.
Hi
If your query below is still unresolved, then I request you to
- pls be more clear on what your question is? this will help in providing a suitable solution.
Thanks,
Srikanth
Similar Messages
-
Open Purchase Order Conversion Script (Data Loader)
Hi All,
Hope you all are doing well.
I need a Quick help from anyone of you peole. Does anyone having Data Loader script for Open Purchase Order.
I need it badly. My client is using 12.1.3 version.
Please help.
Regards,
AdityaHi All,
Hope you all are doing well.
I need a Quick help from anyone of you peole. Does anyone having Data Loader script for Open Purchase Order.
I need it badly. My client is using 12.1.3 version.
Please help.
Regards,
Aditya -
Data Migration for Open Purchase Order
Hi, All,
Is there anyone know how to Count the volume for Open Purchase Order. What's the normal strategy for the Data Migration and Cut-over stage?
My client want to know how many Open Purchase Order in the legacy system and then determine manual or automatic data migration. If manual, how to do? If automatic, how to do? Because all materials and vendors, plants are different number. How to track? How to find out to match between new and old?
Thank you very muchJC,
Sounds a bit early to be making decisions about the realization phase. It doesn't sound like you have finished the Blueprinting phase yet, much less the testing phase.
Anyhow, in my experience I typically use LSMW (Legacy system migration workbench) to load MM master data (material masters), Inventory (WIP, RM, FG, etc) Purchasing Master data (Vendors, Purchase Info Records, Source Lists, Quota Arrangements), and Purchasing transactional documents (POs, PurReqs, Scheduling Agreements, etc). Depending on the complexity and volume of data, it may be necessary to write custom programs to load the data. You will find this out during your requirements gathering.
It is uncommon but possible to load all of these data manually. I have never run across a client that wants to pay a consultant's hourly rate to sit at a terminal to peck away loading master data, so if the client intends to have his own users enter the data manually, the project manager should make provision that there will be qualified TRAINED client employees available for this data entry. I did help with a portion of a conversion once manually; of Sales Credits, but there were only about 30 SD docs to load. I did this the evening before go-live day, while I was waiting for some of my LSMW projects to complete in the background.
A good opportunity to 'practice' your data loads is right after you have completed your development and customization, and you have gotten the approval from the client to proceed from the pilot build to the full test environment. Once you have moved your workbench and customization into the client's test environment, but before integration testing, you can mass load all, or a substantial portion of your conversion data into the qual system. You can treat it like a dry run for go-live, and fine tune your processes, as well as your LSMW projects.
Yes, it is good practice to generate comparisons between legacy and SAP even if the client doesn't ask for it. For Purchase orders on the SAP side, you could use any of the standard SAP Purchasing reports, such as ME2W, ME2M, ME2C, ME2L, ME2N. If these reports do not meet the requirements of the client, you could write a query to display the loaded data, or have an ABAPer write a custom report.
You didn't ask, but you should also do comparisons of ALL loaded data - including master data.
It sounds like you are implying that the client wants YOU to extract the legacy data. For an SAP consultant, this is not very realistic (unless the legacy system is another SAP system). Most of us do not understand the workings of the myriad legacy systems. The client is usually expected to produce one or more legacy system technical experts for you to liase with. You normally negotiate with the technical expert about every facet of of the data migration. In addition, you will liase with business users, who will help you and the implementation team to logically validate that the final solution (turnkey SAP production system, fully loaded with data) will meet the client's business needs.
Finally, you mentioned how do you track the mapping of master data between legacy and SAP. There are many ways to do this. I normally try to get the legacy person do the conversion on his end, eg, when he gives you the load file, you would like to have already translated the master data and inserted the SAP relevant values into the file. If this is not possible, I usually use MS Access databases to maintain a master map, and I perform the mapping on a PC. If your data package is small, you can probably get by using MS Excel or similar.
Good Luck,
DB49 -
How to check/update an open purchase order ?
Dear Experts,
Is there any Transaction to check the open purchase order?
Since our company has recently started working with SAP, my supervisor asked me to make a full report of it.
Thus, I would kindly like to ask
how we can check the open purchase order?
how to check/see purcahse orders that are not shipped yet?
how to see purchase orders that are currently overdue?
I will really appreciate if you can give me a detail overview of an purchase order(even more than the questions mentioned above).
Thankyou in advance.
Wishes,
JeevanHi Jeevan,
Check ME2L or ME2N with Scope of list as BEST or ALV and Selection paramters - WE101 or WE103
Thanks & Regards,
Ramagiri -
Urgent :Doubt on open Purchase orders
Hi friends,
i will be more help full if anybody can help me on below issue how to find open PO and partially open PO.
Only open purchase orders will be extracted for conversion into Destination Server. An open purchase order is defined as any unshipped, non-cancelled with open quantities. In regards to, partially open purchase orders, we will only convert open units (i.e. Original ordered qty was 300; 70 have shipped, 230 remain open Target Server sales order will have an original order qty of 230).
also where to find that Sub Contracting orders and Sample orders.
Orders not considered for migration because they will have either shipped in full or deleted prior to data migration as a part of data clean-up: ALL subcontracting orders; sample orders
please help me on the above two issues.
thanks and Regards,
Gokul.Hi
First take the ALL Po's from EKKO and EKPO tables and check for the different GR's and GI's qty's from MKPF and MSEG tables and you have to compare the PO qty with the total GR/GI qty's and to find the OPEN po's
see the sample report
*& Report ZMM_PO_REPORT
REPORT ZMM_PO_REPORT message-Id yb
NO STANDARD PAGE HEADING
LINE-COUNT 60(1)
LINE-SIZE 230.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master
t161, " PO Doc Types
t024, " Purchase Groups
ekko. " PO Header
T Y P E S D E C L A R A T I O N S
Purchase Orders Main Structure
TYPES: BEGIN OF s_po,
ebeln TYPE ebeln, " PO No.
ebelp TYPE ebelp, " PO Item
bstyp TYPE bstyp, " PO Category
bukrs TYPE bukrs, " Company Code
bsart TYPE bbsrt, " PO Type
lifnr TYPE lifnr, " Vendor No
ekgrp TYPE bkgrp, " Purchase Group
waers TYPE waers, " Currency
bedat TYPE etbdt, " PO Date
txz01 TYPE txz01, " Material Text
werks TYPE ewerk, " Plant
lgort TYPE lgort_d, " Storage Location
matkl TYPE matkl, " Material Group
menge TYPE bamng, " PR Quantity
meins TYPE bamei, " UOM
bprme TYPE bbprm, " Price Unit
netpr TYPE netpr, " Net price
peinh TYPE peinh, " Price Unit UOM
pstyp TYPE pstyp, " Item Category
knttp TYPE knttp, " Account Assignment Category
END OF s_po.
Purchase Orders History Structure
TYPES: BEGIN OF s_account,
ebeln TYPE ebeln, " PO No.
ebelp TYPE ebelp, " PO Item
gjahr TYPE mjahr, " Fiscal Year
belnr TYPE mblnr, " PO Invoice No
menge TYPE menge_d, " PR Quantity
wrbtr TYPE wrbtr, " Price in Local Currency
dmbtr TYPE dmbtr, " Price in Foreign Currency
waers TYPE waers, " Currency
shkzg TYPE shkzg, " Dr/Cr Indicator
END OF s_account.
Purchase Orders History Structure(Item Sum)
TYPES: BEGIN OF s_inv_sum,
ebeln TYPE ebeln, " PO No.
ebelp TYPE ebelp, " PO Item
menge TYPE menge_d, " PR Quantity
wrbtr TYPE wrbtr, " Price in Foreign Currency
waers TYPE waers, " Currency
END OF s_inv_sum.
Purchase Orders Main Structure
TYPES: BEGIN OF s_rep,
lifnr TYPE lifnr, " Vendor No
ebeln TYPE ebeln, " PO No.
ebelp TYPE ebelp, " PO Item
bstyp TYPE bstyp, " PO Category
bsart TYPE bbsrt, " PO Type
ekgrp TYPE bkgrp, " Purchase Group
waers TYPE waers, " Currency
bedat TYPE etbdt, " PO Date
txz01 TYPE txz01, " Material Text
werks TYPE ewerk, " Plant
lgort TYPE lgort_d, " Storage Location
matkl TYPE matkl, " Material Group
menge TYPE bamng, " PR Quantity
meins TYPE bamei, " UOM
bprme TYPE bbprm, " Price Unit
netpr TYPE netpr, " Net price
peinh TYPE peinh, " Price Unit UOM
pstyp TYPE pstyp, " Item Category
knttp TYPE knttp, " Account Assignment Category
name1 TYPE name1, " Plant
orewr TYPE netpr, " To be Invoiced Price
curr TYPE waers, " Inv Doc Currency
END OF s_rep.
D A T A D E C L A R A T I O N S
DATA: gv_title1 TYPE sylisel, " Report title
gv_dial. " Color flag
C O N S T A N T S D E C L A R A T I O N S
CONSTANTS: c_x VALUE 'X', " Flag X
c_h VALUE 'H', " Debit
c_vgabe TYPE vgabe VALUE '2'. " Transaction Type
I N T E R N A L T A B L E S D E C L A R A T I O N S
DATA: i_po TYPE STANDARD TABLE OF s_po WITH HEADER LINE,
" Purchase Order
i_inv TYPE STANDARD TABLE OF s_inv_sum WITH HEADER LINE,
" PO Invoice Values
i_rep TYPE STANDARD TABLE OF s_rep WITH HEADER LINE,
" PO Invoice Values
i_ekbe TYPE STANDARD TABLE OF s_account WITH HEADER LINE.
" PO Invoice Values
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr MATCHCODE OBJECT kred,
s_ebeln FOR ekko-ebeln MATCHCODE OBJECT mekk,
s_bsart FOR t161-bsart,
s_ekgrp FOR t024-ekgrp,
s_bedat FOR ekko-bedat.
SELECTION-SCREEN END OF BLOCK b1.
I N I T I A L I Z A T I O N *
INITIALIZATION.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_screen.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P - O F - P A G E *
TOP-OF-PAGE.
Header of the List
PERFORM header.
E N D - O F - P A G E *
Footer
END-OF-PAGE.
ULINE.
E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Display the Report Output data
PERFORM display_data.
At Line-Selection
AT LINE-SELECTION.
When double clicked on EBELN display the details of Purchase Doc
PERFORM line_sel.
*& Form validate_screen
Validation of Selection Screen fields
FORM validate_screen .
Validation of Vendor Number
CLEAR lfa1-lifnr.
IF NOT s_lifnr[] IS INITIAL.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Vendor'(002).
ENDIF.
ENDIF.
Validation of PO Number
CLEAR ekko-ebeln.
IF NOT s_ebeln[] IS INITIAL.
SELECT ebeln UP TO 1 ROWS
INTO ekko-ebeln
FROM ekko
WHERE ebeln IN s_ebeln.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Document Number'(003).
ENDIF.
ENDIF.
Validation of PO Document Type
CLEAR t161-bsart.
IF NOT s_bsart[] IS INITIAL.
SELECT bsart UP TO 1 ROWS
INTO t161-bsart
FROM t161
WHERE bsart IN s_bsart.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Purchase Document Type'(004).
ENDIF.
ENDIF.
Validation of Purchasing Group
CLEAR t024-ekgrp.
IF NOT s_ekgrp[] IS INITIAL.
SELECT ekgrp UP TO 1 ROWS
INTO t024-ekgrp
FROM t024
WHERE ekgrp IN s_ekgrp.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Purchasing Group'(005).
ENDIF.
ENDIF.
ENDFORM. " validate_screen
*& Form fetch_data
Fetching the PO related data from Database Tables
FORM fetch_data .
CLEAR i_po.
REFRESH i_po.
SELECT a~ebeln " PO No.
b~ebelp " PO Item
a~bstyp " PO Category
a~bukrs " Company Code
a~bsart " PO Type
a~lifnr " Vendor No
a~ekgrp " Purchase Group
a~waers " Currency
a~bedat " PO Date
b~txz01 " Material Text
b~werks " Plant
b~lgort " Storage Location
b~matkl " Material Group
b~menge " PR Quantity
b~meins " UOM
b~bprme " Price Unit
b~netpr " Net price
b~peinh " Price Unit UOM
b~pstyp " Item Category
b~knttp " Account Assignment Category
INTO TABLE i_po
FROM ekko AS a JOIN ekpo AS b
ON a~ebeln = b~ebeln
WHERE a~ebeln IN s_ebeln AND
a~lifnr IN s_lifnr AND
a~ekgrp IN s_ekgrp AND
a~bsart IN s_bsart AND
a~bedat IN s_bedat.
SORT i_po BY ebeln ebelp.
break-point.
IF NOT i_po[] IS INITIAL.
Fetch the PO History/Invoice Details from EKBE Table
CLEAR i_ekbe.
REFRESH i_ekbe.
SELECT ebeln " PO No.
ebelp " PO Item
gjahr " Fiscal Year
belnr " PO Invoice No
menge " PR Quantity
wrbtr " Price in Local Currency
dmbtr " Price in Foreign Currency
waers " Currency
shkzg " Dr/Cr Indicator
INTO TABLE i_ekbe
FROM ekbe
FOR ALL ENTRIES IN i_po
WHERE ebeln = i_po-ebeln AND
ebelp = i_po-ebelp AND
vgabe = c_vgabe.
break-point.
IF sy-subrc = 0.
SORT i_ekbe BY ebeln ebelp.
LOOP AT i_ekbe.
IF i_ekbe-shkzg = c_h.
i_ekbe-wrbtr = i_ekbe-wrbtr * -1.
ENDIF.
MODIFY i_ekbe.
ENDLOOP.
break-point.
Sum up the Item wise Invoice totals
LOOP AT i_ekbe.
AT END OF ebelp.
READ TABLE i_ekbe INDEX sy-tabix.
SUM.
MOVE-CORRESPONDING i_ekbe TO i_inv.
APPEND i_inv.
ENDAT.
CLEAR i_inv.
ENDLOOP.
SORT i_inv BY ebeln ebelp.
break-point.
ENDIF.
ENDIF.
Move the Vendor Name and Invoice Values to I_rep Internal Table
LOOP AT i_po.
MOVE-CORRESPONDING i_po TO i_rep.
CLEAR i_inv.
READ TABLE i_inv WITH KEY ebeln = i_po-ebeln
ebelp = i_po-ebelp.
IF sy-subrc = 0.
i_rep-orewr = ( i_po-menge - i_inv-menge ) * i_po-netpr.
i_rep-curr = i_inv-waers.
ELSE.
i_rep-orewr = i_po-menge * i_po-netpr.
i_rep-curr = i_po-waers.
ENDIF.
break-point.
Get the Vendor Name
CLEAR lfa1-name1.
SELECT SINGLE name1 FROM lfa1 INTO lfa1-name1
WHERE lifnr = i_po-lifnr.
IF sy-subrc = 0.
i_rep-name1 = lfa1-name1.
ENDIF.
APPEND i_rep.
CLEAR i_rep.
break-point.
ENDLOOP.
SORT i_rep BY lifnr ebeln ebelp.
DELETE i_rep WHERE orewr LE 0.
break-point.
ENDFORM. " fetch_data
*& Form display_data
Display the Report Output data
FORM display_data .
DATA: lv_flag, " New Flag
lv_rec TYPE i. " No of Records
CLEAR lv_rec.
IF i_rep[] IS INITIAL.
MESSAGE e000 WITH 'No Data found'(022).
ELSE.
LOOP AT i_rep.
Toggle Color
PERFORM toggle_color.
IF lv_flag <> space.
NEW-LINE.
ENDIF.
At New Purchase Document
AT NEW ebeln.
WRITE:/1 sy-vline, 2(10) i_rep-ebeln INTENSIFIED OFF.
lv_flag = c_x.
lv_rec = lv_rec + 1.
ENDAT.
WRITE: 1 sy-vline,
12 sy-vline,13(4) i_rep-bsart,
17 sy-vline,18(10) i_rep-lifnr,
28 sy-vline,29(35) i_rep-name1,
64 sy-vline,65(4) i_rep-ekgrp,
69 sy-vline,70(10) i_rep-bedat,
80 sy-vline,81(5) i_rep-ebelp,
86 sy-vline,87(40) i_rep-txz01,
127 sy-vline,128(9) i_rep-matkl,
137 sy-vline,138(1) i_rep-pstyp,
139 sy-vline,140(1) i_rep-knttp,
141 sy-vline,142(4) i_rep-werks,
146 sy-vline,147(4) i_rep-lgort,
151 sy-vline,152(13) i_rep-menge UNIT i_rep-meins,
165 sy-vline,166(3) i_rep-meins,
169 sy-vline,170(15) i_rep-netpr CURRENCY i_rep-waers,
185 sy-vline,186(4) i_rep-waers,
190 sy-vline,191(5) i_rep-peinh,
196 sy-vline,197(4) i_rep-bprme,
201 sy-vline,202(15) i_rep-orewr CURRENCY i_rep-curr,
217 sy-vline,218(4) i_rep-curr,
222 sy-vline,223(7) i_rep-bstyp centered,
230 sy-vline.
NEW-LINE.
hide: i_rep-ebeln.
ENDLOOP.
ULINE.
FORMAT COLOR OFF.
WRITE : /2 'Total Number of Purchasing Documents:'(025) COLOR 3,
lv_rec COLOR 3.
ENDIF.
ENDFORM. " display_data
*& Form header
Write the Report Header
FORM header .
FORMAT RESET.
header
WRITE:/1(230) 'LIST OF PURCHASE DOCUMENTS PER VENDOR'(006) CENTERED.
SKIP.
FORMAT COLOR COL_HEADING.
ULINE.
WRITE:/1 sy-vline,2(10) 'Pur.Doc.No'(006) CENTERED,
12 sy-vline,13(4) 'Type'(007),
17 sy-vline,18(10) 'Vendor'(008) CENTERED,
28 sy-vline,29(35) 'Name'(009) CENTERED,
64 sy-vline,65(4) 'PGrp'(010) CENTERED,
69 sy-vline,70(10) 'Doc.Date'(012) CENTERED,
80 sy-vline,81(5) 'Item'(011),
86 sy-vline,87(40) 'Material Short Text'(024) CENTERED,
127 sy-vline,128(9) 'Mat.Group'(013),
137 sy-vline,138(1) 'I',
139 sy-vline,140(1) 'A',
141 sy-vline,142(4) 'Plnt'(014),
146 sy-vline,147(4) 'SLoc'(015),
151 sy-vline,152(13) 'Quantity'(016) CENTERED,
165 sy-vline,166(3) 'UoM'(017),
169 sy-vline,170(15) 'Net Value'(018) CENTERED,
185 sy-vline,186(4) 'Curr'(019),
190 sy-vline,191(5) 'Per'(020),
196 sy-vline,197(4) 'Unit'(021),
201 sy-vline,202(15) 'To be Invoiced'(023) CENTERED,
217 sy-vline,218(4) 'Curr'(019),
222 sy-vline,223(7) 'Doc.Cat'(026),
230 sy-vline.
ULINE.
ENDFORM. " header
*& Form toggle_color
This routine alters the color of the records in the list
FORM toggle_color.
IF gv_dial = space.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
gv_dial = c_x.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
CLEAR gv_dial.
ENDIF.
ENDFORM. " toggle_color
*& Form LINE_SEL
*When double clicked on EBELN field display the details of Purchase Doc
FORM line_sel.
CASE sy-lsind.
WHEN '1'.
DATA: lv_field(20),
lv_value(10),
lv_bstyp like i_rep-bstyp.
clear: lv_bstyp,lv_value, lv_field.
GET CURSOR FIELD lv_field VALUE lv_value.
IF lv_field = 'I_REP-EBELN'.
IF NOT lv_value IS INITIAL.
READ LINE sy-index FIELD VALUE i_rep-bstyp
INTO lv_bstyp.
READ CURRENT LINE FIELD VALUE i_rep-bstyp INTO lv_bstyp.
if lv_bstyp = 'F'.
SET PARAMETER ID 'BES' FIELD lv_value.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
elseif ( lv_bstyp = 'K' or lv_bstyp = 'L' ).
SET PARAMETER ID 'VRT' FIELD lv_value.
CALL TRANSACTION 'ME33' AND SKIP FIRST SCREEN.
elseif lv_bstyp = 'A'.
SET PARAMETER ID 'ANF' FIELD lv_value.
CALL TRANSACTION 'ME43' AND SKIP FIRST SCREEN.
endif.
ENDIF.
ENDIF.
ENDCASE.
ENDFORM. " line_sel
<b>Reward points for useful Answers</b>
Regards
Anji -
Open Purchase Orders not considered as requirement for MRP Run
Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
SaravananCan you check to see if there is a re-order point set up for this materia? That could be causing the problem too.
-
Dear Experts,
My client has change the release procedure, but they have not closed the open Purchase orders, now we are trying to close the open PO system is not allowing us to close the Open Po , complete delivery indicator is in grey mode , Can any body help me How i wll i close the Open Purchase orders
Thanks
HirwaniHi Hirwani,
I have seen this a few times before.
I found other customer has similar problem as the release strategy has changed
after creation of the SES please review the explanation from developer
:(whose release code is 03 )
When you try to revoke the acceptance of the service entry sheets
in ML81N or ML81, the 'Enter release code' pop up window appears, but
entering the code that is determined via the menu path Goto -> Entry
Sheet -> Release Strategy (which is the 03), the SES remains the same.
Nothing changes. The status does not vary and no error or warning
message is issued.
Checking the customizing for the release strategy, the release code
03 should have never been assigned to the SES 800024272 as the values
for the relevant characteristics were not included under that code.
I do not know how it was managed to accept the SES.
Now, when you try to revoke it, it seems that no release
strategy can be determined, not even including the values RCARESANO
and 012 between the valid values for the characteristics of the release
code 03 (RCARESANO as valid value for SUPERVISOR_SERVICIOS
(CESSR-ERNAM)and 012 as valid value for GRUPO_COMPRAS (CESSR-EKGRP)).
The only Possibility is to change now the SES so that the release
strategy can be re-determined by the system.This is the Only possible
way that the system can redetermine the Release Strategy , but it will
not be possible to do so as the SES is already accepted with the Old
strategy and it does not admit any further changes.
To be able to change it you would need to revoke the SES first,
but this Will also not be possible as the Release Strategy was changed
and the system still applies the old rules for determining the Release.
Solution to our Problem
The Only way to revoke the SES is to Restore back the Old Strategy that
was prior to 03 in the customizing.So now what will happen is that by
applying the Old Rules the System will be able to revoke the SES that#s
using the Old one. Once the necessary SES are revoked then go back to
customizing and apply the new strategy as it was did now, and
Change the SES and save , the new value of the Release Strategy will get
updated in the table ESSR and the field frgsx will now have 03.
Problems associated if the Release strategy is changed
Actually the release strategy is not supposed to be changed when there
are some documents in the System that uses it and even if you change the
Strategy the Old records will not get AUTOMATICALLY UPDATED by the
system.The Release Strategy routine has to run again to update the
values. This is Possible by changing the document SES ,
This change will happen only if the SES is not accepted and if its
accepted then you need to revoke and to revoke you need to restore the
old strategy , revoke and then change the SES , and have to go back to
customizing and Start using the New strategy from now on by doing so the
Routine will update the old record with the new strategy.
You may want to use CEKKO-BADAT(Requisition Date) or any other
structure in CEBAN or CEKKO and create a new release strategy
to differentiate the old release strategy.
Alternatively using the corresponding user exit to redermine the BAdI might help but my first suggestion would be the best.
Purchase requisition
M06E0002 - for item wise release
M06E0005 - for overall release
External purchasing document
M06E0004
Hope this is of help to you,
Kind Regards,
Matthew -
Function Module for open Purchase Order & Sales Order?
Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen -
Extract of gr processing time in open purchase order
to display gr processing time in open purchase order .give me query for extract the gr processing time which table and which field we have to take
Hi
Check the tables<b> MKPF and MSEG</b> tables for this
these 2 tables only will store the data related to the GR and GI's
<b>Reward points for useful Answers</b>
Regards
Anji -
Hello Friends,
Can u explain me about Open Purchaseorder, ie about the tables and fields that are used in open purchase order and also the Tcode.
Thanks in advance,
Bannu.Right now i am working with the same report
I took the tables EKKO, EKPO, EINE, EKET.
different fileds r, P.O#, Line #, Mat #, short description, vend #, Vend name, plant id, po delivery date, contract number, contract price, pricing info record number, price......
main condition u have to check for the open PO is EKPO-ELIKZ = ' ' then those po r open po's or u can also check EKPO-EREKZ = ' '.
If you find useful mark the points
~~Guduri -
BADI or function module for updating open purchase orders
Hi all,
Does anyone know of a BADI or function module which can be used for updating item prices in open purchase orders?
All helpful answers are highly appreciated!
Regards,
MV1 ) execute this program in se38 .enter the input as transaction code for which you want list of User
Exit.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
2) Second way is to go to transaction code SE93 .enter transaction code click on display.
There you will see the package. Copy that package name.
Go to transaction code se84
Enhancements -customer exits-enhancementsu2014enter package there and execute.
You will get list of exits.
3) BAPI for PO change is
BAPI_PO_CHANGE -
Look for 'Purchase Order' and 'Due date' Tables
Hi Everyone,
iam creating a Form for an automatic payment and i have some difficulties to find the table of these fields :
- Purchase Order (EBELN)
- Due date (NETDT)
Please can u help me?
Regards.I hope you checked these tables.
I found these on Where-used for your NETDT field, Alos these tables have field BELNR which might intrests you.
Table Fields Short descriptn
BWPOS Valuations for Open Items
FAEDT Due Date for Net Payment
DKKOP Balance Audit Trail
NETDT Due Date for Net Payment
DKOKP Open Item Account Balance Audit Trail
NETDT Due Date for Net Payment
DSKOP Balance Audit Trail
NETDT Due Date for Net Payment
MHND Dunning Data
FAEDT Due Date for Net Payment
good luck,
ags. -
Open Purchase Order UPload Using the BAPI 's
i need to upload the open Purchase Order using the BAPI function BAPI_PO_CREATE1., below is the given fileds blod are for Header, header will Repeat for the line items,can any one help me out using the BAIP's for upload the PO, i need sample code for this ........
Thanks & Regards
Raghu
<u>Field Name Field Description Type Length</u>
<b>EBELN Purchasing Document Number CHAR 010 X
BUKRS Company Code CHAR 004 MN10 C
EKORG Purchasing Organization CHAR 004 MN00 C
EKGRP Purchasing group CHAR 003 X
BSART Order type (Purchasing) CHAR 004 X
LIFNR Account Number of Vendor or Creditor CHAR 010 X
BEDAT Purchase Order Date DATS 010 X
ZTERM Terms of payment key CHAR 004 X
WAERS Currency Key CUKY 005 X
INCO1 Incoterms (part 1) CHAR 003 X
INCO2 Incoterms (part 2) CHAR 028 X</b>
EBELP Item Number of Purchasing Document NUMC 005 X
EMATN Material number CHAR 018 X
WERKS Plant CHAR 004 X
LGORT Storage location CHAR 004 X
EPSTP Item category in purchasing document CHAR 001 X
KNTTP Account assignment category CHAR 001 X
EINDT Item delivery date DATS 010 X
MENGE "Purchase order quantity (direct input, transfer of POs)" CHAR 013 X
MEINS Order unit UNIT 003 X
NETPR "Net price: Document currency (direct input, transfer of" CHAR 011 X
PEINH "Price unit (direct input, transfer of POs)" CHAR 005 X
BPRME Order Price Unit (Purchasing) UNIT 003 X
BPUMZ Numerator: Conversion OPUn into OUn (direct input of POs CHAR 005 X
BPUMN Denominator: Conversion OPUn into OUn (direct input of P CHAR 005 X
SAKTO Cost element CHAR 010 X
KOSTL Cost Center CHAR 010 X
VBELN Sales and Distribution Document Number CHAR 010 X
VBELP Sales document item NUMC 006 X
WEMPF Goods recipient CHAR 012 X
WEBTH "Amount in local currency (direct input, transfer of POs)" CHAR 013 X
WEBTF "Amount in document currency (direct input, transfer of P" CHAR 013 X
WEREF Flag for treatment of GR/IR (direct input of POs) CHAR 001 X
SPINF Indicator: Update info record CHAR 001 X
WEPOS Goods Receipt Indicator CHAR 001 X
REPOS Invoice receipt indicator CHAR 001 Xi need to upload the open Purchase Order using the BAPI function BAPI_PO_CREATE1., below is the given fileds blod are for Header, header will Repeat for the line items,can any one help me out using the BAIP's for upload the PO, i need sample code for this ........
Thanks & Regards
Raghu
<u>Field Name Field Description Type Length</u>
<b>EBELN Purchasing Document Number CHAR 010 X
BUKRS Company Code CHAR 004 MN10 C
EKORG Purchasing Organization CHAR 004 MN00 C
EKGRP Purchasing group CHAR 003 X
BSART Order type (Purchasing) CHAR 004 X
LIFNR Account Number of Vendor or Creditor CHAR 010 X
BEDAT Purchase Order Date DATS 010 X
ZTERM Terms of payment key CHAR 004 X
WAERS Currency Key CUKY 005 X
INCO1 Incoterms (part 1) CHAR 003 X
INCO2 Incoterms (part 2) CHAR 028 X</b>
EBELP Item Number of Purchasing Document NUMC 005 X
EMATN Material number CHAR 018 X
WERKS Plant CHAR 004 X
LGORT Storage location CHAR 004 X
EPSTP Item category in purchasing document CHAR 001 X
KNTTP Account assignment category CHAR 001 X
EINDT Item delivery date DATS 010 X
MENGE "Purchase order quantity (direct input, transfer of POs)" CHAR 013 X
MEINS Order unit UNIT 003 X
NETPR "Net price: Document currency (direct input, transfer of" CHAR 011 X
PEINH "Price unit (direct input, transfer of POs)" CHAR 005 X
BPRME Order Price Unit (Purchasing) UNIT 003 X
BPUMZ Numerator: Conversion OPUn into OUn (direct input of POs CHAR 005 X
BPUMN Denominator: Conversion OPUn into OUn (direct input of P CHAR 005 X
SAKTO Cost element CHAR 010 X
KOSTL Cost Center CHAR 010 X
VBELN Sales and Distribution Document Number CHAR 010 X
VBELP Sales document item NUMC 006 X
WEMPF Goods recipient CHAR 012 X
WEBTH "Amount in local currency (direct input, transfer of POs)" CHAR 013 X
WEBTF "Amount in document currency (direct input, transfer of P" CHAR 013 X
WEREF Flag for treatment of GR/IR (direct input of POs) CHAR 001 X
SPINF Indicator: Update info record CHAR 001 X
WEPOS Goods Receipt Indicator CHAR 001 X
REPOS Invoice receipt indicator CHAR 001 X -
DEAR ALL,
WHETHER WE HAVE A STANDARD REPORT IN SAP TO GET QUANTITY AND VALUE DATA OF BACK DATED OPEN PURCHASE ORDER?
PURCHASE ORDER HAS BEEN PREPARED IN JANUARY, DOWN PAYMENT IS MADE IN THE MONTH OF MARCH, MATERIAL IS RECEIVED (GRN MADE) IN AUGUST
IN ABOVE CASE WHEN I GENERATE A OPEN PURCHASE ORDER REPORT AS ON 31.03.2008 IT IS NOT SHOWING ME THE QUANTITY & VALUE DETAILS OF OPEN PURCHASE ORDERS.
PLEASE LET ME KNOW THE WORK AROUND.
WAITING
AMITDear,
Enter ME2N, Select WE101 in selection parameter field.
Then enter other required detail and click on execute button.
So system give you list of open purchase order.
Then click on change layout button.
Transfer Still to be invoiced (qty) field Column Set to Display column set mode.
And click on continua button.
Duse to this field you can track for how many quantity good receipt is created of purchase order.
Regards,
Mahesh Wagh -
Report with open Purchase orders and open Goods Receipt (without invoices)
Dear All,
We require a report in purchasing which will show:
1. open purchase orders
2. open goods receipts
We do not want POs and GRs that have been created into invoices to be included in the report.
At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
Any help would be appreciated.
G.Hi,
Try ME2N, Select WE101....Also Select ALV
go to next screen....Go to change layout
Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
Hope Help U!
Regards,
Pardeep Malik
Maybe you are looking for
-
When I try to update itunes, I get the following: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the
-
[SOLVED] Cannot boot with linux-3.5.3
Edit: Solved, as explained here. Hello, after upgrading to linux-3.5.3-1 my boot stopped at :: running early hook [udev] I tried upgrading to grub-bios-2.00, removing any customization I had in modprobe.conf and /etc/modules-load.d as well as removin
-
How to check for Unicode/Non-Unicode SAP?
Hi All, Please let me know how can I check whether an SAP system is a Unicode/Non-Unicode from SAP GUI? Thanks in advance, Adarsh
-
"My Music" app .. song name displayed in error
Hi, I have a C1-01. I have stored some mp3s on the memory card, and I checked with an ID3 editor on my PC, they have their ID3 tags correct. But in the "My Music" app on the phone, when I go to "All Songs", many songs have their name displayed in err
-
Closing CVI - "the index passed is out of range"
Hello, Just recently, I've been getting popup messages (2 or 3) when I close CVI saying that "the index passed is out of range." There is no way to debug this since all I can do is hit OK and CVI closes after two or three popups. Any suggestions? T