DSO activation step has been failing if i activate from process chain

Hello Frnds,
one of the DSO activation step is failing from process chain.
Problem : if i do the activation from PC then only it is failing
If i do the DSO activation manually then it is fine .
Kindly provide your suggestions on this issue.
Thanks & regards
Ravi

Hello Lavanya,
below are the logs for ur reference & process monitor is not genereated
log from Process Tab:
Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZXXXX
Activation of M records from DataStore object ZOGSDRCA terminated
Job log:
Job started
Step 001 started (program RSPROCESS, variant &0000000015318, user ID ALEREMOTE)
Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZOGSDRCA
Activation of M records from DataStore object ZOGSDRCA terminated
Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZOGSDRCA
Activation of M records from DataStore object ZOGSDRCA terminated
Entire chain now has status 'A'
Process Activate DataStore Object Data, variant Activate Data ZOGSDREC has status Undefined (instance )
Process Generate Index, variant Generated from DROPINDEX ZDELETEREC_CAUSE_INDEX has status Undefined (instance )
Process Generate Index, variant Generated from DROPINDEX DELETE_INDEX_ZCGSDREC has status Undefined (instance )
Process Data Transfer Process, variant ZOGSDREC -> ZCGSDREC has status Undefined (instance )
Process Data Transfer Process, variant ZOGSDRCA -> ZCGSDRCA has status Undefined (instance )
Process Delete Index, variant Delete Reclamation causes' index has status Undefined (instance )
Process Delete Index, variant Delete index of ZCGSDREC Reclamations has status Undefined (instance )
Process Start Process, variant Start Reclamation delta load has status Completed (instance 4EQ978RV7JE1BU3MT2YB20A3X)
Process Execute InfoPackage, variant 2LIS_05_Q0NOTIF Delta has status Successfully completed (instance REQU_4EQTTCCMY2XEEPL99XGE9EECT)
Process Execute InfoPackage, variant 2LIS_05_Q0CAUSE Delta has status Successfully completed (instance REQU_4EQG4DHZ6JD3K5UZCR5WP16P9)
Process Data Transfer Process, variant 2LIS_05_Q0NOTIF / EQ2CLNT210 -> ZOGSDREC has status Undefined (instance DTPR_4EQ97CM4OU8SN3TPQ44G2ZMZX)
Process Generate Index, variant Generated from LOADING ZPAK_4BFDG83ZVZM4MDUC6L71H1 has status Successfully completed (instance INDX_4EQ97IDIWSIXM0EU3NVNMGOBX)
Process Activate DataStore Object Data, variant Generated from LOADING ZPAK_4BFDG83ZVZM4MDUC6L71H1 has status Ended with errors (instance ODSA_4EQG4KJGK99HMTOSPBB5WU0BX)
Job finished
Here i am giving process types sequence :
Infopackage -> Create index-> DSO activation.
does this create index is generating any issues ?
Regards
Ravi
Edited by: BIuser on Aug 10, 2009 1:13 PM
Edited by: BIuser on Aug 10, 2009 1:13 PM

Similar Messages

Delta has been failed whie loading

HAI Experts
Delta has been failed. Due to "NO SID VALUE FOUND FOR RECORD NO 6234 OF CHAR 0CREDITOR"
PLS PROVIDE ME THE STEP BY STEP PROCESS. BECAUSE IT HAS OCCURED IN PRODUCTION.

Hi there,
That's because 0creditor has a value in the delta load that hasn't a SID.
Remove the failed delta from the InfoProvider.
Load 0creditor.
activate the 0creditor master data under transaction rsattr.
Reload the failed delta (delta repeat)
Try to see if this works.
If not, remove the failed delta once again.
Run the report in transaction se38 RSDMD_CHECKPRG_ALL for the InfoObject 0creditor in repair mode.
Reload the failed delta again.
Diogo.

TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
Thanks

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

How to deactivate a Photoshop 10.0/CS3 (Mac) serial key when the workstation with the activated installation has been entirely wiped?

Hello,
We have a license for Photoshop 10.0/CS3 (Mac version) but it appears that the users previous workstation was wiped without deactivating the installation of Photoshop. Now when he tries to activate the product, it says that the maximum number of activations allowed has been reached. Does this mean that we need to deactivate the serial key somehow? If so, how are we supposed to do it without the activated installation?
Thank you very much,
Mauno-Juhani Kari
Ambientia

Hi Wksl98472121,
Please share your serial number via private message so that i can help you out in activating CS3 Photoshop.
Thank you for posting on Adobe Forums.

My ipod keeps saying that my in-app purchase has been failed:(

I tried to buy fish bucks for the game called tap fish however it keeps saying that my in-app purchase has been failed. try it again.
i tried it again and again but it didn't work :/ i don't know what to do! please help me!
i'm scared that i'm not gonna be able to buy any other paid-apps that i want to purchase.

ohhhhh! i thought i was the only one who is having a problem with it. and actually...i found it out today that they are having some problem with in-app purchases. i saw the message every time when i played tapfish but didn't read it at all and just pushed the x button cuz i thought it was just an ad. haha my bad! thank you for your help though (:

HT1725 hello i just bought gem from dragon vale's game. and i bought it 2 times, because it said the download has been failed. can you help me please?

dear community,
hello i just bought gem from dragon vale's game. and i bought it 2 times, because it said the download has been failed. and it cost about $10. and i just want to buy $4.99
can you help me please?

You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Activity 0010 has been assigned material components - Deletion not allowed

HI friends,
Even after deleting the material from the activity, the system is giving the following error message
Activity 0010 has been assigned material components - Deletion not allowed
The status of the activity is REL.
One purchase order already created for this WBS element.
The material found deleted from the activity but why it is giving the same message.
Activity 0010 has been assigned material components - Deletion not allowed
Edited by: M.Alagesan on Sep 13, 2010 1:15 PM

Is that material already consumed?
Generally when you try to delete the operation, it also deletes the dependencies of the activity, i.e., it deletes the components associated to that activity, if it is not issued to the order.
Check the details in your system.
Praveen

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

My partner has been given an iphone 4 from her father, I have manged to delete and move to her email but need to know how to change the phonebook i.e delete it and change the apple i.d...any ideas?

Hi All
My Partner has been given an ipone 4 from her father.
I have managed to delete his email and set hers up, what I need to do is delete his contacts entirley..would this be able to be done if she connected her ipone to the computer and made herself an apple I.D or is it a matter of reset ?
Also some pictures on the phone she would like to keep..
Many thanks

If her contacts are available in an Address Book app on her computer that is supported for syncing with the iPhone, she can select the supported address book app on her computer under the Info tab for her iPhone sync preferences for syncing contacts. She should be provided a merge prompt or replace the contacts on her iPhone with what is available in the address book app on her computer. Select the 2nd option.

HT204088 i purchased some songs with a voucher. on the receipt it say store credit, does that mean my credit card has been charged or was credit from the voucher?

I purchased some songs with a voucher. on the receipt it says store credit, does that mean my credit card has been charged or was credit from the voucher?

Welcome to the Apple Community.
Purchases are deducted from any credit you have before your card is used, providing the credit covers the whole cost of the purchase.

Delta initialisation removed in PSA, DSO can't activate in process chain.

Hi all,
i have removed delta initialisation request in the PSA area, DSO still contains the delta initialisation request in them, during process chain DSO activation process, it fails to activate the delta load and complains about the missing delta initialisation from PSA area (again DSO has the correct data and delta initialisation load), the delta changes are loaded correct into DSO objects, only failed during activation.
PSA is only temporary area, if it is loaded into DSO correctly, what is PSA can be made redundant, isn't this true? right now, i need to manually repeat the activation process to keep the process chain to run again.
i realise i can just re-initialise these data streams again, but don't wanna do it unless there is absolutely no other alternatives.
Regards,
Joe

Hi all,
In case any one out there is encountering the similar problem, I raised an OSS message, SAP came back with proposed solution:
Implement Note 984242, I am on BI 7.0 SP9 with a number of corrections implemented, and this works for me.
cheers.

Transportable Tablespace Importing - Failed to read stderr from process

Hello,
I'm using the normal EM console packaged with Oracle (10gR2) and am trying to import a tablespace on RedHat rel4.
I follow the Transport Tablespaces link on the maintenance tab and get the option of export or import and also the place to put the host credentials in. I select import, enter the credentials and click continue and am given this error: Failed to read stderr from process.
I've tried logging into EM as SYSTEM, SYS, and a DBA account I use and have used both root and the oracle account with no luck.
Searching hasn't gotten me any useful results here or in metalink so I'm stuck. What am I missing?
Thanks

Thank you thank you!
The short version is I traced it back to an error with /bin/nmo which traced back to a failure to run root.sh when upgrading to 10.2.0.3.
Thanks again!

How do I resolve the Activation Limit Has Been Reached on FrameMaker 10 message

I have 30 days to resolve this issue on my laptop, before I guess the software will stop working. I'm using FrameMaker 10 on my laptop, which had an upgraded hard drive. The previous hard drive has been destroyed. When I launched FrameMaker 10 today it indicated the version I have is still active on the previous hard drive. How do I DE-ACTIVATE that previous version if I no longer have the hard drive?

Hi,
You may have to contact Adobe Support using one of the below options and seek assistance for getting the product activated.
Phone - 800-833 6687 (IVR Options - 2 > 4 > 2)
Chat - Click here to contact Customer Care
For now, I was able to locate your account and have made the required changes. Please try it now and in case you face any issues, please contact support.
Regards,
Sharad

Figuring out of a step has been completed

I posted this here since I am using SwingWorker for my threading, but I may have chosen the wrong section like always. First, here is my code:
    class Task extends SwingWorker<Void, Void>
        @Override
        public Void doInBackground ()
            try
                /* doInBackground is a 2nd thread that connects to the database to download the library
                 * that we will store locally on the system. During the download process, doInBackground
                 * also updates the progress bar and status label so the user knows what is going on.
                 * When this method is called, our ArrayList is cleared to ensure we don't get dupplicate
                 * entries. Each row from the database is stored in an index and the information is
                 * seperated by a tab delimeter. We will use tab spacing to space out the artist, title,
                 * and path of the audio file.
                al.clear ();
                progressLabel.setText ("Connecting to database...");
                downloadProgress.setIndeterminate (true);
                Connection connection = Database.sqlConnection ();
                progressLabel.setText ("Downloading library list...");
                downloadProgress.setIndeterminate (false);
                Statement stmt = connection.createStatement (ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
                String sql = "SELECT * FROM audio";
                PreparedStatement pstmt = connection.prepareStatement (sql);
                ResultSet rs = pstmt.executeQuery ();
                /* Let's get the row count so we can make an accurate progress bar. First, we must move the cursor
                 * of the ResultSet to the last row, and by using getRow(), we can return an INT of the last row
                 * count. We will then store that INT into 'rowcount'. After doing so, we much move the cursor back
                 * to the beginning of the ResultSet. Otherwise, we will not be able to get any row information since
                 * we are at the last row.
                rs.last ();
                int rowcount = rs.getRow ();
                downloadProgress.setMaximum (rowcount);
                rs.beforeFirst ();
                /* Now we are ready to read the row information from the database. Starting at the beginning of the
                 * ResultSet, we will get the information from each row and store it in an ArrayList. We will then
                 * use the ArrayList to write our downloaded library to a file. We are using an ArrayList due to
                 * the fact that we will not be able to accurately specify the number of indexes needed, hence
                 * why we are not using a typical Array.
                while (rs.next ())
                    al.add (rs.getInt ("id") + "\t" + rs.getString ("artist") + "\t" + rs.getString ("title") + "\t" + rs.getString ("path") + "\t" + rs.getInt ("length"));
                    downloadProgress.setValue (downloadProgress.getValue () + 1);
                Database.closeResultSet (rs);
                Database.closePreparedStatement (pstmt);
                Database.closeStatement (stmt);
                Database.closeConnection (connection);
                System.out.println("The size of the ArrayList is " + al.size () + " indexes");
                /* Now that we have downloaded the list from the server, libraryCreator will
                 * take the array and write it to library.lst to make our music list locally
                 * accessable. This will reduce us to only 1 SQL connection instead of needing
                 * a connection everytime the user wants to search for a song.
                libraryCreator ();
            catch (SQLException e)
                // Could not connect to the database
                JOptionPane.showMessageDialog (null,"Unable to connect to the database.\n\nPlease check your network connection. "
                        + " Contact the administrator if the problem persists.", "Connection Error",
                        JOptionPane.ERROR_MESSAGE);
                System.out.println ("Error: " + e.getMessage ());
            return null;
         * Executed in event dispatching thread
        @Override
        public void done ()
            try
                Toolkit.getDefaultToolkit ().beep ();
                setCursor (null); //turn off the wait cursor
                progressLabel.setText ("Completed.");
                continueButton.setEnabled (true);
            catch (Exception e)
                System.out.println(e);
    }What's going on is, well everything is working correctly, but I want to be a bit more accurate with my error reporting. Currently, the application is connecting to a database, selecting all the rows from a table, getting the total number of rows so I can accurately update my progress bar, close my statements and connection, and then call a method to do some file writing. With the way it is right now, say I am unable to connect to the database due to lack of network connection or whatever, I still throw an exception and display a JOptionPane telling the user that there was a connection issue, but even with the exception being throw, my progress indicator still goes on to finish up and say "Completed" when it really isn't completed.
Within my done() method, how can I go about seeing if an exception has been thrown in my Database class, and if so, change the progressLabel to "Incomplete" rather than "Complete"? Hopefully this makes sense.

Hi,
introduce a flag
class Task extends SwingWorker<Void, Void> {
private boolean completed = false;
...into your Task class and set it to true, when your task is finished, inside the doInBackground method right after you called libraryCreator(), e.g.
     libraryCreator();
     completed = true;
   } catch (SQLException e) {
...Change the done method so that it checks that flag. For example:
* Executed in event dispatching thread
@Override
public void done() {
try {
    Toolkit.getDefaultToolkit().beep();
    setCursor(null); //turn off the wait cursor
    if ( completed ) {
      progressLabel.setText("Completed.");
      continueButton.setEnabled(true);
    } else {
      progressLabel.setText("An error occured.");
      continueButton.setEnabled(false);
} catch (Exception e) {
    System.out.println(e);
}- Michael

Apple Ipad has been factory reset and removed from manage devices but the new user can't register it under a new ID

iPad generation 2 has been factory reset, removed from managed devices, apple support, and the device still continues to say it's locked by my ID and cannot be unlocked and registered to a new ID.
HELP!

Even if you are sure you have done all of this, do it again slowly and in the order given:
Prepare your device to sell or give away
If there is still a problem, post back with the exact complete wording of the error message
received.

DSO activation step has been failing if i activate from process chain

Similar Messages

Maybe you are looking for