DTP actvation

Hi
I have transported transfermation(from DSAO to Cube)from Dev to Quality.As a result the concerned DTP is deactivated and version is changed ro Revised.When Iam trying to activate the DTP in Quality.The Error is
1)Activation of Objects with Type Data Transfer Process
2)&     @5F\QNo long text exists@
3)Error when activating Data Transfer Process DTP_49HYSEQGZDPJ0C8XKL39XLATA     @5F\QNo long text exists@.
@5C\QError@     Error when activating Data Transfer Process DTP_49HYSEQGZDPJ0C8XKL39XLATA     @5F\QNo long text exists@
I can transport DTP again from Dev, but I want to know
Is there any program to actvate the DTP in Quality and Production.

Hi Radha Krishna,
Once again transport the DTP. Then it will be activated.
Let me know if you have any issues.
Regards,
Haritha

Similar Messages

  • Error while executing a DTP

    Hi All ,
    I got  an error while executing a DTP. Short Dump analysis points this error. :   DBIF_REPO_SQL_ERROR.
    Please provide in your valuable inputs to resolve this error.
    Thank & Regards,
    Rohit Garg

    This error comes majorly when you have a deadlock in  your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
    If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
    Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM

  • Error while activating the DTP

    Dear all,
    We are using BI7.00. For one of our reports, the data is transferred from one cube to another cube. When the DTP which transfers the data is activated, the following error appears.
    Error from PSA ****
    Message no. RSAODS000
    Error when activating Data Transfer Process DTP_D5Q7YV8OBC64VH1DG6MY6O0UI
    There is no other information regarding this message. I have tried deleting the DTP and re-creating a new one but still problem persists.
    Can experts throw light on this?
    Regards,
    M.M

    Hi Magesh,
    Please check the below solution:
    you can execute the 'RS_TRANSTRU_ACTIVATE_ALL' program for the 3.x InfoSource(s) affected.
    SAP NetWeaver 2004s BI
               Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package will become available once Note 914304 with the short text, "SAPBINews BI 7.0 SP10", which describes this Support Package in more detail, is released for customers.
    To provide information in advance, the note mentioned above may already be available before the Support Package is released. In this case, however, the short text will still contain the words "Preliminary version".
    Note No: 968504
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=968504
    With Regards,
    Ravi Kanth

  • Error while copying a DTP

    Hi Experts,
    Its a simple yet confusing error to me. I copy a DTP which has some filters defined. I get an error saying both the DTPs can not have the same filter criteria - if its a Delta DTP. I say ok and try to change the filter values , interestingly the error still remains and my new DTP does not activate.
    Please suggest how I can resolve this. I can not change the udpate method to "Full". It has to be a "Delta".
    Appreciate your inputs,
    thanks,
    Shweta

    Hi Shweta,
    I think you have posted your question to the wrong forum.  The OnDemand forum is specifically for applications like crystalreports.com and bi.ondemand.com.
    Cheers
    Steve

  • SHORT DUMP WHILE EXECUTING DTP.

    Hi Gurus,
    I have got a short dump while executing DTP the Error is as Follows.
    Runtime Error: MESSAGE_TYPE_X.
    Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
    2.There is a error in the application program
    And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
    But i have no much time and i have to someway or the other execute the DTP and load the data.
    Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
    Regards
    Amar.

    Hi Amar,
    If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
    Thanks..
    Shambhu

  • Error while executing DTP

    Hi gurus,
    Iam trying to extract the data from r/3 using generic extractor the data is loaded into PSA sucessfully, but iam getting following errors while executing DTP.
    1.An error occurred while executing a transformation rule:
    The exact error message is:
    The argument 'EA' cannot be interpreted as a number
    The error was triggered at the following point in the program
    GP4D35STLXQI3SHIVNQC2FSJ7MB 791
    2.The data record was filtered out because data records with the same key
    have already been filtered out in the current step for other reasons and
    the current update is non-commutative (for example, MOVE). This means
    that data records cannot be exchanged on the basis of the semantic key.
    Please guide me accordingly.
    Regards
    Amar.

    Hi
    While mapping the Qty Fields it is must to add UOM to the Qty Fields and map it with relevant Info Objects.
    The Semantic Keys defined at DTP are also has some issues, try to give a dummy key figure if you are using DSO in the data flow as the DSO has the Overwrite mode.
    (Choose  Semantic Groups to specify how you want to build the data packages that are read from the source (DataSource or InfoProvider). To do this, define key fields. Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten. This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.)
    Hope it helps and clear

  • Help. I'm trying to create a DTP for 0INDUSTRY texts

    I'm trying to create a DTP for 0INDUSTRY (texts), but when I assign the DataSource (0INDUSTRY_TEXT), it shows me the next error message: "Target 0industry (type IOBJ) is not active".
    Of course I've checked 0industry and it is already active!
    I have the same issue with several characteristics.
    Do somebody knows what can I do?

    Hi,
        Try comin out of rsa1 transaction and then going back in...else login and logoff.  Its generally happens that the changes dont get reflected and it then shows that error.
    assign points if helpful
    Regards.

  • DTP can Not extract data of date field from PSA to Target DSO

    Hi everyone.
    I enhanced several fields in datasource "2LIS_12_VCITM". that is date field "BLDAT" and another date type fields.
    The data of date type fields are extracted very well from datasource to PSA.
    But only field "BLDAT" among them are NOT extracted from PSA to target DSO.
    Another date type fields is good. but only "BLDAT" field is empty.
    I added "BLDAT" later than another date fields.
    Is that the reason??
    I don't know why.
    Let me know the solution. pls~~~~

    Hi,
    Try deleting and recreating the DTP and loading again.
    This solution refers to note 925941 and should be solved in SPS10.
    Best regards,
    Olav

  • Unable to load the data into Cube Using DTP in the quality system

    Hi,
    I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
    I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
    Please suggest .
    Thanks,
    Satyaprasad

    Hi,
    Some Infoobjects are missing while collecting the transport.
    I collected those objects and transported ,now its working fine.
    Many Thanks to all
    Regards,
    Satyaprasad

  • Incorrect initial value for char 0FISCYEAR in i_t_range in DTP filter prog

    Gurus
    I need your help , I have searched all the threads but could not find anything which can help me resolve this issue.
    I have a filter in DTP as a routine to get the year from system date.
    The program is correct for syntex but when I trigger the DTP I am getting the following message , not sure what needs to be added to my programe.
    Incorrect initial value for characteristic 0FISCYEAR in i_t_range
    Message no. DBMAN889
    appreciate any help I can get to reoslve this ASAP.
    Thanks in advance

    Hi
    Pleae check if you have initialised with a NULL value . "blank/null" is indeed not a valid characteristic value for fiscal period. Fisc.per is of type NUMC which means all characters have to be numerical. The initial value should be "0000000" .
    Thanks,
    Rajesh.
    Please provide points to answers if you find them helpful

  • What is the diffrence between full load and delta load in DTP

    hI ,
    I am trying to load the data into CUBE from another cube using DTP ..
    There are 2 DTPS ..
    1: DTP with full load
    2: DTP with DELTA load ..
    what is the diffrence betwen thse two in DTP ...
    Please can somebody help me

    1: DTP with full load  - will update all the requests in PSA/source to the target,
    2: DTP with DELTA load - will update only new requests to the datatarget
    The system doesnt distinguish new records on the basis of changed records, rather by the request. Thats the reason you have datamart status to indicate if the request has been loaded to further datatargets.

  • DTP not getting displayed in Transported Objects in Quality System

    We are Tranporting all the CRM Master Data but no DTP AND IP are getting displayed in Quality system is there any setting to make to transport these or get it displayed.
    Please help
    Thanks
    Soniya

    I dont understand the question. Can you pl explain what do you want to do?
    Ravi Thothadri

  • DTP can't be deleted, if transformation was deleted before it

    DTP can't be deleted, if transformation was deleted before it
    How I can delete that DTP?

    Hi,
    if you want delete the Delta DTP or Full DTP use program deleting DTP's.
    enter the T-CODE-  SE38 -> run the program -> give the DTP technical name -> execute.
    it will go permanently.
    Thanks,
    Phani.

  • Exception error in DTP

    Hi ,
    I am getting error when i run DTP , The request shows red when i see the log it says exception raised in Start routine ,
    below is the Warning message in start routine when i go through the log see
    The exception CX_static_check is neither caught nor is it declared in RAISING clause of "EXECUTE"
    but when i see in start routine and transformations there is no syntax errors , please some one help me how to come out from this...
    Regards,
    Roma

    Please Debug the code while the data is being loaded & you will come to know where exactly is the DTP failing.
    Also, go to ST22 to see the run time error & the piece of code where it is pointing to.
    If possible, paste the piece of code that is written after you've found out where exactly is the problem.
    Regards
    Vishal
    Edited by: Vishal Sanghvi on Mar 14, 2011 8:47 AM

  • Exception error in DTP  CX_static_check

    Hi ,
    I am getting error when i run DTP , The request shows red when i see the log it says exception raised in Start routine ,
    below is the Warning message in start routine when i go through the log see
    The exception CX_static_check is neither caught nor is it declared in RAISING clause of "EXECUTE"
    but when i see in start routine and transformations  there is no syntax errors , please some one help me how to come out from this
    FYI : many times i activated transformations and DSO and restart the system as well but still same problem
    Thanks,
    AshaKP
    Edited by: AshaKP on Jan 9, 2011 7:43 PM

    Hi ,
    Thanks for your Reply, I did that too but still  the same Problem ,Here i see strange problem it  is not giving any dump just it says problem in start routine when i click that it showing select statement in start routine but i dont think any problem with Select statement when i  click on syntax check it shows the below problem. for reference i can provide my select statement as well
    *The exception CX_STATIC_CHECK is neither caught nor is it declared in          *
    the RAISING clause of "EXECUTE".
    SELECT
                              comp_code
                              chrt_accts
                              gl_account
                              ac_doc_no
                              item_num
                              fiscyear
                              acct_type
                              co_area
                              costcenter
                              postxt
                              creditor
                              debitor
                              MATERIAL
                              plant
                              DOC_DATE
                              OI_EBELN
                             DOC_NUMBER
                             /BIC/ZERFMG
                             /BIC/ZERFME
                             /BIC/ZBPMNG
                             /BIC/ZBPRME
                              /bic/zaltacct
                            FROM (zt) INTO CORRESPONDING FIELDS OF TABLE
                            it_td
                            FOR ALL ENTRIES IN it_sp
                            WHERE ac_doc_no = it_sp-ac_doc_no
                            AND ( ( item_num = it_sp-/bic/zbuzeid ) or
                                 ( item_num = it_sp-/bic/zbuzeik ) )
                            AND  comp_code = it_sp-comp_code
                            AND   fiscyear = it_sp-fiscyear.
    Note : problem when i only add  DOC_NUMBER to the select statement , if i comment DOC_NUMBER in select statement my data is loading perfectly
    Thanks
    Asha

Maybe you are looking for