DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Similar Messages

  • Lock NOT set for: Loading master data attributes error

    Hi experts,
    We were encountering this error before when trying to load master data.  When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again.  We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE.  I have read that it is possible this lock error happens when two change runs happen at the same time.
    My question are:
    1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
    2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
    mark
    Message was edited by:
            Mark Siongco
    Message was edited by:
            Mark Siongco

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Lock NOT set for: Loading master data attributes

    Error when running Process chain on a load pls can you advise?
    Thanks

    Hi,
    Probably some other job is running for the same tables,or activation change run is happening.
    Check your monitor to see what other jobs are running or check in SM37. Wait till those jobs finish and then try again.
    You can also use tcode SM12 to delete any lock entries as well.
    Cheers,
    Kedar

  • Lock NOT set for: Archiving the data from a data target

    Dear Expert,
    I try to archive one of my info cube, when i start to write the Archive file the Free Space in the Archive folder not enough and it make the process error.
    Then i try to changes the Archive folder to another path with enough free space. But when i start to write the archive file with new variant this error message came up :
    ==============================================================
    An archiving run locks InfoProvider ZICCPS810 (archivation object BWCZICCP~0)
    Lock NOT set for: Archiving the data from a data target             
    InfoProvider ZICCPS810 could not be locked for an archiving session 
    Job cancelled after system exception ERROR_MESSAGE                  
    ==============================================================
    Please Help Me.
    Wawan S

    Hi Wawan,
    If the earlier archive session resulted in error, please try to invalidate the earlier session in archive management and try running archive job again.
    Hope this helps,
    Naveen

  • Error "Lock not set for: Generate index" while running process chain

    SAP BI 7.0
    SP 17
    I am attempting to run a new process chain and the generate index steps are failing with the below errors:
    "Lock NOT set forGenerate index"
    "RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
    The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
    Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

    Hello,
    So Create index is getting failed in you PS right?
    1)check  if any other loads are running to the same CUBE(May be from other PC's also)
    Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
    2) If the Create index is running for long time, then  got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen  only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
    Hope it helps!

  • Lock NOT set for loading masterdata/attributes - already locked

    Dear all,
    I've searched this forum for similar topics bu couldn't find a solution yet
    I'm loading masterdata for 0PERSON but an error appears stating' Master data table or text table already locked'.
    I've checked if there is an attribute change run active but there isn't anything, I've executed all of them where necessary.
    Transaction RSRV is not showing problems for the info object (No SIDS missing etc)
    There are no locked records in SM12/SR12.
    I've tried to reload the infopackage and run the DTP again but without success.
    Please advice how to unlock the table.
    Regards
    Markus

    Hi,
    Just check following
    1. Whether there is any active job in SM37 for loading this master data ,if anything triggered manually
    2. Check whether any R/3 job is active for this master data
    3. Check whether any attribute change run job is active
    4. Check whether any roll up /BIA job is running
    5. Check consistency of table in SE14 and RSRV for master data
    6. Try to manually activate and see if same error is coming?
    Also check following thread
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0869e29-1405-2e10-27be-db1dad7703c5?QuickLink=index&overridelayout=true
    Thanks and regards

  • Error when scheduling the infopackage for loading Master data attributes

    Hi,
    Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
    In Data load monitor error i got this following error message.
    Error message when processing in the Business Warehouse
    Diagnosis
    An error occurred in the SAP BW when processing the data. The error is documented in an error message.
    System response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update rules
    Thanks

    HI,
    A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    SM21 - System log can also be helpful.
    Thanks,....
    Shambhu

  • Process chain for loading master data attributes

    Dear Experts,
    Can any one explain the steps needed to load master data into info object through process chain.
    Thanks in advance
    Santhosh
    Please search the forum
    Edited by: Pravender on Jun 8, 2010 3:06 PM

    in bi7 this would be:
    start
    infopackage
    dtp
    attribute change run
    M.

  • Where to set lock while loading master data attributes

    Hello Experts,
    I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
    When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
    Here what exactly  LOCK means?
    Thanks in advance.
    Zakir Khan.

    Hi,
    The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
    In your case you and schedule the DTP one after another.
    Thanks

  • Error while loading master data attribute

    Hi Guru's
    I am getting below mention error while loading master  data attribute.
    0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
    Please sugggest how to resolve ?
    Regards
    Karan

    Hi,
    I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor. 
    Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
    If need use Conversion exits in transfer rules.
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    or
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

  • Loading master data attributes

    Hi.
    When I am loading master data attributes, DTP process takes long time (approximately 30 minute) .
    Although records count is just 193.
    What may be a reason of this?
    Information about system:
    Software component   Release    Level
    SAP_ABA                      700          0023  
    SAP_BASIS                   700          0023  
    SAP_BW                        700          0025

    Hi...
    Check the Package size in the DTP......try to increase or decrease it.....if it makes any differerence......
    Secondly....in the DTP in the tab "Update" select the option " Valid records update, No reporting"....then the "Semantic Groups" in the tab " Extraction" will work.....it will improve the performance....
    Regards,
    Debjani........

  • Best Practices for Loading Master Data via a Process Chain

    Currently, we load attributes, text, and hierarchies before loading the transactional data.  We have one meta chain.  To load the master data it is taking more than 2 hours.  Most of the master data is full loads.  We've noticed that a lot of the master data, especially text, has not changed or changed very little since we implemented 18 months ago.  Is there a precedence or best practice to follow such as do we remove these processes from the chain?  If so, how often should it be run?  We would really like to reduce the amount of the master data loading time.  Is there any documentation that I can refer to?  What are other organizations doing to reduce the amount of time to load master data?
    Thanks!
    Debby

    Hi Debby,
    I assume you're loading Master Data from a BI system? The forum here are related to SAP NetWeaver MDM, so maybe you should ask this question in a BI forum?
    Nevertheless, if your data isn't changed this much, maybe you could use a delta mechanism for extraction? This would send only the changed records and not all the unchanged all the time. But this depends on your master data and of course on your extractors.
    Cheers
    Michael

  • Load Master data attributes error

    Hi all
    We are currently loading 0PM_ORDER and 0NOTIFICATN. In 0PM_ORDER we have 0NOTIFICATN as navigational attribute and in 0NOTIFICATN we have 0PM_ORDER as a navigational attribute. Sometimes both documents are new and as a result will the 0PM_ORDER not load becuase 0NOTIFICATN does not exist and vice versa. If you try to load 0NOTIFICATN it generates an error stating that the SID does not exist for 0PM_ORDER. So we found ourselves in a catch 22 situation.
    Is there a way to check for individual navigation attributes instead of using the generic update type in the scheduler?
    Thanks
    Karin

    Hi,
    If you make notification number as navigation attribute then it will create issues as it will try to create SID's for PM while loading the data and vice versa.
    May be you can try to remove PM orders from the navigation of Notification number and make it display only and see what happenes.
    Another soln is tricky but should work.
    Load the notification numbers first only to the notification number infoobject by any mean and activate this master data.This could be through the a new DSO between the existing data source and master data.
    I hope there will be attributes for notification number as well.
    Once notification is loaded then load the master data for PM Orders and then load the master data again for notification infoobject from the data source through another DSO.
    This may be tough in the case of delta as you will have to go for the same data load twice to the master data object.
    In this case you can have to TWO DSO's in between the master data object and the data source one only for notification number and another one for all the its attributes.
    Load the same delta from the data source to the bothe DSO.
    Use the one with only notification number to load before the PO orders load to the notification infoobject and load the data from nother DSO with attributes after the PM loads have happened into the notification number objects.
    You can wait for other replies as well if you are looking for easy solution.
    Thanks
    Ajeet

  • Dump when loading Master data(Attributes). using DTP

    Hello....  I am loading activity network.
    and getting a dump.
    "MESSAGE_TYPE_X" " "
    "CL_RSDMD_UPDATE_MASTER_DATA===CP"  or "CL_RSDMD_UPDATE_MASTER_DATA===CM00R"
    "_CHECK_DATA_PACKET"
    check for oss couldn't find any solution  I am in (BI 7.0 - 2004s) support pack SAPKW70015. If anyone of you has come accross this please let me know how you solved the issue.
    thank you.

    Hi Gopal,
       Here is the info on error message.
    " There are duplicates of the data record 1 & with the key '00000000038 &' for characteristic EPROPERTY &. "
    Hope this helps in understand the DTP error.
    Thanks,
    SB.

Maybe you are looking for

  • Can no longer print from an internet website, SAVE window pops up

    Computor will not print from a website eg: recipes, bank statements, etc. Instead, a Save window pops up. Have tried saving to Desktop, but then can't find document, or can't open doc. How to get back to just be able to print from web.

  • [CS3 JS] pasteInPlace keeping Text Threads

    Aloha I am working on a script the will copy all textFrames on all pages and do a pasteInPlace on a new Layer. I have everything working with the pasteInPlace. Other than loosing the Text Threads from overset text. Is there a way to have the newly pa

  • Can selected items in time Machine be removed?

    Is there any way to remove selected items from time machine backups?

  • Item value not showing up in PL/SQL function on another item.

    Basically, I am trying to update a database field based on the vaule of 2 other fields, but the item value dow not seem to get stored. No errors, it just shows up as a null value in the database. Here is the code inside the default area as a FL/SQL F

  • Brightness Filter effecting quality and color.

    Hi, Guys. I could really do with your help. I shot a scene in low light conditions so the image is fairly grainy anyway (I shot the scene on an Sony PMW EX3). Some of the shots are a little bright though. I want to darken the image slightly but when