DTP got inactivated
Hi Experts ,
In BW system one DTP failed with below message
"No object directory entry for object R3TR DTPA DTP_4DV1PPE2E9AK4OC1NW16WQ66T
Assign a package
System setting does not allow changes to be made to object DTPA DTP_4DV1PPE2E9AK4OC1NW16WQ66T"
I tried to edit and create new DTP but not able to do it
Please help
Regards,
Puru
First of all , what are you trying to do ? Did you receive this message during transport? Which system ? Development ? Production?
You can change settings so that you are able to edit DTP even on the Production :
Go to RSA - > Transport connection - > Object changeability (button above the right frame)
Select DTPA object type and change the setting.
However I am not sure if this is enough in your case as I do not know what is the backround for your issue.
regards
Similar Messages
-
Transormations and DTP got inactive in both DEV and QLTY
Hi,
I have transported transformations,dtp from development to quality,and also loaded data into the DSO.But suddenly I found that both in development and qualitysystem transormation and DTP got inactivated.How it is possible and what is the solution for this
Regards
LuckyHi,
Check this forum:
Re: How to check for the last changed date/time for Multiprov, DSO and Tran
Thanks...
Shambhu -
Hi Experts, I had to adjust transformation and the system prompted me to create transport request. I transported that and now I got error code 4 and the connected DTP got deactivated. I was wondering what went wrong.
This is the logs of the error code 4:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
Rule 1 (target: 0RECORDMODE group: 01 Technical Group ): Constant is initial
Saving Objects with Type Transformation
Internal Activation (Transformation )
Preprocessing / Creation of DDIC Objects for Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
Post Processing/Checking the Activation for Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4 was activated
Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4 was successfully generated
Impact analysis of Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
DTP affected by change has been deactivated
Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4 activated
Please guide on this. Do I need to collect the Transformatio and DTP again?
Edited by: SAPman on Oct 9, 2008 1:55 AMHi
When you did some chnages to the trasnformation,then you need to activate the dtp again.
Lets collect the Trasnformation,DTP,Datasource and it will be no problem for trasnporting to qulaity. -
Mitigating Controls got Inactivated
Friends,
we got some mitigating controls popped up in controls library option under management view, but those are actually active and i suspect this is happening because of not mentioning valid to date when they are created and mitigating controls gets expired after 365 days(as per our setting).
Is there any way that these can be reactivated or do we need to delete and re-create them.
Thanks for the help in advance.Hi Srinu,
Mitigation controls will never get inactivated. It is the users who will be out of the mitigation controls after 1 year (default mitigation period).
However, if you are referring to the Active and Inactive controls in the management view under the control library, the Inactive controls are the one which are untouched from a long time. If you mitigate another user, it will be automatically added in the active control list.
Hope this helps!!
Regards,
Raghu -
DTP got failes due to overlapping time intervals of data records
Hi,
Can any one suggest me how to solve this issue....
the problem is when iam loding Master Data DTP, the DTP is showing error message that Overlapping time intervals of data records.I mean the start data and end data for these error records are same.
Eg: For some employees the start date and end data are same.
Please advice , what can be done...
Immediate reply is realy appreciated.Hi Shaik,
By checking this check box ...
You won't get any duplicate records, before loading the data DTP removes the duplicate records and loads into Master data.
So, you can avoid the duplicate records by checking this.
Regards,
Ravi Kanth -
Inactive transformations and DTPs after running BDLS
Hi Experts
I ran the BDLS job, Restored , Activated and Replicated the S.S.
Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION " although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module /SDF/AL_MAP_TRANSID_LOGH does not exist." I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
Please advice
Thanks
PKPrabu,
have you solved this issue?
I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
Please let us know how you solved it.
Appreciate your response
Shashi
Update:
Note# 1142908 fixed my issue..
Shashi
Edited by: Shashi on Sep 10, 2008 7:22 PM -
Transformation & DTP deactivated in source system
Hi,
I am trying to load the data from one BI System to another BI system. I am generating Export Data Source for that .
But the Issue is that when i am doing this, in the source system transformation & DTP got Deactivated.
Can any body tell why this happens?
( My source system is BI Production so it is not allowing me to do any changes)
Thanks in advance,
VaibhavHi,
You might not be having Authorizations to edit the DTP and transformations in Production server.
If the production server is closed... run the program :RSDG_TRFN_ACTIVATE
Make sure to check out check sap note 1408161. For BW 7.0 it is SP25...
If your system is not having the SP25 its not possible to use the above mentioned program.
The other way is to re-import the DTP and transformation to Prodcution in new TR.
Regards
KP -
How to handle Invalid characters in BI 7.0
Hi ,
Due to lower case letters in ODS ,DTP got failed ,we have replaced with Upper case letters in PSA,but how to load failed request from PSA to data target thru DTP as here we don't get option to reconstruct the failed request from PSA.we have deletd failed request from ODs and again done DTP but it is again failing .
Thanks in Advance ,
RashmiHi Rashmi,
Create Error DTP, the all error records will be in error Stack and correct records will be update to data target.
you can modify all bad records in error stack and upload to data target.
you can create Error DTP, at the present DTP, (2nd tab, Update).
Regards
Daya Sagar -
Hi
I have one cube FULL OF DATA,lets say,XYZ which gets data from three different dataflows(each starting from its own database view>own DSO>same cube XYZ) and this cube is included in Multiprovider which is live.
Now I have request to bring data from new view to same cube and create new report.
So I am going to create new database view,new datasource and new DSO and connect this DSO to same cube XYZ.This cube contains all fields brought by this view except one new keyfigure.So I will add this keyfigure to cube and multiprovider.
Then I create reports.
I am thinking of doing like below:
1.Create new keyfigure infoobject
2.Create datasource based on view
3.Create DSO
4.Create Transformation between Datasource and DSO
5.Add this new keyfigure to Cube and activate it and also activate all dependent objects on cube which got inactivated
6.Create transformations between DSO and cube
7.Choose this new keyfigure in Multi and activate it.
8.Create reports.
Is there anything I forgot which may create problem since this Cube is full of data and live?Any suggestions.
Regards.Hi,
If you are using BI 7.0 data flow there should not be any issue adding a new key figure in the cube with data in it using Remodelling tool. Buw if you are using BW3.5 or lower version you will need to create a backup cube and then empty the original cube before remodelling the cube as remodelling is not allowed with data in BW3.5.
Navesh -
Batch program to replicate DataSources in process chains
Hi everybody,
I am looking for a batch program to replicate DataSoruces in a BW 3.5 system. I would like to use this program at the beginning of process chains, in order to avoid any potential problems from transports into productive environment.
I found the following program already but it seems not to work: RSAOS_METADATA_UPLOAD_BATCH
thanks in advance for any help
UlrichHi John
thanks for the hint. Of course you are right. I would expect to have also a transport in BW. It happend unfortunately several times, that not only the involved DataSource got inactivated in our complex data model, but also other ones.
That's why I look simply for the program that replicates DataSources. I tried already with tracing in via SM30 - unfortunately no useful results
regards,
Ulrich -
Emulated DS's appearing , info packs miss after system copy in 7.0 system
Hi All
We did a system copy of our BI dev system into a new installed BI 7.0
system.As part of the post refresh steps we ran the BDLS run.We noticed
that all the info packages were missing and the emulated data sources
appeared instead of 7.0 data sources..We tried to migrate one of the
emulated DS's and then all the info packages associated with that data
source were seen......Also the DTPS were inactivated bcoz of this and
we had to activate this manually.....But we have around 200 data
sources ...Could you please suggest a program/report/solution to
recover all the info packages and 7.0 data sources instead of migrating
each of them individually which is daunting task.......Hi,
It might be helpful for you to check the SAP note 1072206 and change administration connection accordingly.
Regards,
Masako -
To Make Process Chain Green From Red
Hi Guys,
can any one help in this..
i have a one Process chain at one step i.e DTP got failed and the below steps got success. i manually executed that DTP because the below steps are already successed.
Now in the Process chain it shows that DTP step is failed and other steps are success and Process chain is showing as RED, now i want to make that Process chain as Green. what i need to do?
i did the following steps even it is showing red in the RSPCM screen.
i_logid
i_type
i_variant
i_instance
i_state as 'G'
in the se37 using function module RSPC_PROCESS_FINISH
Thanks,
Nareshhi,
you cannot change the status of the process chain as one of the step in it is red and the status of that red step was not changed. Why do you want to change the status of the chain? do you want to trigger some other chain, if yes then the Se38 program would have already triggered it. If you only want to change it to green to see it in RSPCM it is not possible.
regards,
Arvind. -
How do i recover my photos?
i did not delete my iPhoto. but it somehow got 'inactivated' while exporting a photo. So I went to time machine and tried to restore the iPhoto from the day before. But then I got a message that it could not be done..due to some files being 'locked'..whatever that means....and now on opening iPhoto, i m asked to reinstall it!! So,
1) how do i reinstall it?
2) will i have to pay for it , as my laptop is still quite new and the application came along with it. There was no installation cd along with the laptop.
rgds.this is what i get when i try to open iphoto:
Process: iPhoto [392]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: iPhoto
Version: ??? (???)
Build Info: iPhotoProject-628000000000000~3
Code Type: X86 (Native)
Parent Process: launchd [140]
Date/Time: 2012-01-30 00:38:07.875 +0400
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 78109 sec
Crashes Since Last Report: 15
Per-App Crashes Since Last Report: 14
Anonymous UUID: 5390C335-FDA3-44B5-8107-0490731B64C2
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/Geode.framework/Versions/A/Geode
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x1000 - 0xd1afeb +iPhoto (??? - ???) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0xe83000 - 0xf63fe7 org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0x8fe23000 - 0x8fe559c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
Model: MacBookPro8,1, BootROM MBP81.0047.B24, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f98
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.18)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9A302, 320.07 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H, 1.27 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0246, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3 -
SAPEdit v1.62 (external editor of ABAP/4)
how to execute ABAP program in SAPEdit v1.62 (external editor of ABAP/4) at the local PC? I do have SAPGUI wht else is required to do so?
Hi Siggi,
Thanks for the responce..
can you ellabrate bit please....
Iam working in BI.7
My query is again here i am mentioing
i Have 10 fileds in ODS
i have 9 fields in cube
daily loading is going of fine
Now i deleted the whole cube data and executed the DTP which i have in the system,all the data from day 1 is comming...so need to delete or modify the DTP.
Noww comming to the point i added new infobject 10th one in cube and trasnfomatio0n is just direct assigment.
Once ii run the DTP,it got the error like Assrtaion_Failed.and i mentioned the dump also abaove.
So now i chnaged the tranfomation rules as initial in cube level.then i ran the info package now the DTP got succes....but no data for that newly added field..becuse we kept as initial
In this above case first i deacticvated the cube and activate that
then transfomation as well
Dtp as well....
do i need to activate anything more??
regards -
DAC - Task Group inactivated - but Child tasks got executed.
Hi
I have inactivated a Task Group and assembled the subject area.
Built the Execution plan and executed.
When i checked for Task Group in the execution history after completion. Task Group is not present but its child tasks are present.
I am not familiar with DAC much, can anybody help me finding the problem.
DAC Version information:
Oracle BI Data Warehouse Administration Console
Dac Build AN 10.1.3.4.1.patch.20110427.0538, Build date: April 27 2011
Management console to setup, configure, load and administer the Oracle Business Analytics Warehouse
Schema version - 34, Index version - 33, Repository version - 6, Seed data version - 9
Regards,
SureshYou need to inactivate tasks as well along with task group.
Let me know if you need any other detials here, If not please mark this post as helpful
Maybe you are looking for
-
Process exited with exit code -1073741790 in jdeveloper
Hi, When I try to run a simple Helloworld program in Jdeveloper, The compilation and all is fine, when I try to run it I got the error "Process exited with exit code -1073741790". However I found one solution that, my computer is under a secured netw
-
JBO-26048 error after insert delete commit
Using JDeveloper 10.1.2 running local OC4J against Oracle 9i database * JBO-26048: Constraint "APPLREFLTR_PK" violated during post operation:"Insert" using SQL Statement "BEGIN INSERT INTO DCSAT_APPL_REF_LETTER(APPLICANT_ID,LETTER_ID,LETTER_INF,CREAT
-
using oel5.7 and 11gr2 i am using the following script to startup and shutdown automatically ORACLE_HOME=/home/oracle/product/10.1.0/Db_1 ORA_OWNER=oracle case “$1″ in ’start’) #If the system is starting, then … su – $ORA_OWNER -c “$ORACLE_HOME/bin/l
-
Adobe Photoshop CS5 3D Menu missing, need solution ASAP
I recently made a 3D Wallpaper and when im gonna make one again the 3D menu is gone. I don't know if it is because of update or something, but when i searched for an answer or a solution in Google, i've found multiple comments regarding the license
-
How to use ICC profiles and soft proofing profiles?
Hi, I got an Epson Stylus Pro 3880 and Epson Hot Press paper which, upon investigation, received great profeesional reviews and, having never printed digitally before, I don't know how to use profiles for soft proofing or printing. I don't know where