DTP with upload doesn't work

Hello guys,
I need your help.
I'm having a strange symptom. I have created a simple DTP to transfer data fom one Cube to another.
If I execute the DTP with delta upload it works fine and transfer all data, but if I change it to full upload it says that the source don't have data.
Can somebody explain this?
Many thanks,
João Arvanas

Hi,
You are right, but i have already done that. I deleted all delta loads and changed DTP to Full upload.
I have created inumerous DTPs and definitely DTPs with full upload don't retrive data.
I'm thinking in sending a note to SAP.
Do you agree?
Best regards,
João Arvanas

Similar Messages

  • I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutique,

    I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutiqu

    It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
    Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
    Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
    And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
    Type 
    ping facebook.com
    into the window. Do you see any transmissions? What is the IP address used?
    I see:
    PING facebook.com (173.252.110.27): 56 data bytes
    64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
    64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
    64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
    64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
    64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
    64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
    64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
    64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
    64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
    64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
    ^C
    --- facebook.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
    Try the same with "dig":
    dig facebook.com
    ; <<>> DiG 9.8.3-P1 <<>> facebook.com
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;facebook.com.                              IN          A
    ;; ANSWER SECTION:
    facebook.com.                    775          IN          A 173.252.110.27
    ;; Query time: 11 msec
    can you "ping" facebook?

  • Picassa iPhoto uploader doesn't work in iPhoto 08 anymore

    Hi
    I post some of my photos on Picassa. With iPhoto 07, no prb: I downloaded the Picassa iPhoto uploader, and from iPhoto, I used to be able to export my albums easily. But I upgraded to iPhoto 08 few days ago, and just realized there's a bug, and the Picassa uploader doesn't work anymore: after formatting the pictures, the process freezes during the 'Create Album' step, my mac fan starts to run crazy, and I have to cancel the operation. I deleted and reinstalled the uploader, same thing. I can still use the uploader to load picture in Picassa from Finder directly, but I think it was easier and sleeker to do it from iPhoto. I'm disappointed to find such a bug. Has anyone else met that problem with Picassa, or with any other uploader? Is there a solution?
    Thanks
    Laurent

    You'll have to wait until Picasa and the other plugin developers update their plugins to be compatible with iPhoto 7. The ball's in their court.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Upload doesn't Work

    i´m Building an online Folio. Everythings just worked fine …
    But suddenly the Upload doesn´t work anymore … as adding an article … the builder doesn´t upload the files anymore :-(

    Hi,
    Welcome to the forum!
    Is there any error message? Have you tried both the WiFi and the data connections to isolate the issue? Have you also tried uninstalling/reinstalling the application? 
    You can also try to clear the browser's cache. To do this, go to Web > Options or tap on the arrow > select the gear icon > Privacy > Clear privacy data > Cache. 
    Hope this helps. 

  • Cropping pictures with Viewer doesn't work.

    Cropping pictures with Viewer doesn't work.
    Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
    Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

    I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
    Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
    I would try:
    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
    if that doesn't help, then I'd reinstall Mavericks over your current installation.

  • Uploading doesn't work on Safari

    I need to upload photos on etsy, and it doesn't work on my defaul Safari browser. Never had problems before, even uploading to the same website(Etsy)
    Used Camino - no problems.
    Any idea what might be the reason ?
    Everything is up to date, incl. Safari 5.1.2 with Lion.
    Thanks!

    Empty your Safari cache and try resetting Safari from the menu bar.
    And go to Safari > Preferences then select the Privacy tab then click Details
    Type   etsy   in the search field  then click Remove All > Done
    Now disable the Lion "resume" feature. Go to System Preferences > General
    Deselect:    Restore windows when quitting and re-opening apps
    Restart your Mac, launch Safari. See if you can upload photos now.

  • Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

    Hello,
    I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
    Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
    Here below is the code used to print my document :
    char szJavaPrint[6000];
    sprintf(szJavaPrint,
    "pp = this.getPrintParams(); \r\n"
    // fill pp with parameters
    "pp.interactive = pp.constants.interactionLevel.silent; \r\n"
    "\r\n"
    "this.trustedPrint(this, pp);"
    PDDoc pdDoc = AVDocGetPDDoc(avDoc);
    AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
    It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
    All ideas to resolve this problem are welcome.
    Kind regards,
    Joe

    See what happens if you remove the "setting of interactive to silent"...
    There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
    Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

  • After upgrade to IOS 8.3 sync with iTunes doesn't work

    After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
    On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
    Thanks

    you'll need to contact your carrier.

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • Synchronization of tasks and interaction logs with Outlook doesn't work

    Dear SAP Experts,
    I'm workink on CRM 7.0 (release 7.7.06.010).
    We are trying to make the synchronization of activities, contacts and tasks from our CRM system to Microsoft Outlook.
    It's working fine for the contacts and for the Apointment BP visit (transaction type Y020).
    But no synchronization made for others activities (interaction log Y007 and telephone calls PCAL) or BP Tasks (Y030) we created in the system.
    We just applied today SAP Note 1415263 and Groupware Integration 3.057.
    I made the settings in the CRM Calendar tab in Outlook (with synchronization from CRM to Outlook), and checked apointment, contacts and tasks.
    In customizing (CRM > Transactions > Basic settings > Define transaction types), I flagged for the following transaction types the little 'Calendar' box: Y020, Y030, Y007 and PCAL.
    In another entry (CRM > CRM Middleware and related components > Settings for client-based synchronization), I indicated the transaction type Y020 for DEFAULT_APPT_PROC_TYPE and Y030 for DEFAULT_TASK_PROC_TYPE.
    Any idea about what is missing or not already done?
    Any help will be apppreciated.
    Thanks in advance for your help,
    Kind regards,
    Grégory KREMSER
    Edited by: Grégory Kremser on Feb 3, 2010 3:13 PM

    We don't have a CAS array set up.  We want the fail over to be fully manual and only fail over to another server when mb1 is in a completely failed state and won't be back up and running withing a set time frame.  We can get everything working
    on MB3 and only Outlook doesn't work when everything is on MB2.  Outlook also doesn't work if databases are on another server and DNS is pointing Outlook to MB2 (again MB3 works fine).

  • Powerdns with MySQL doesn't work

    I recently switched from ubuntu to Arch and I love it. However I have problems with PowerDNS running with MySQL database. When I set pdns.conf to
    launch=gmysql                                                                                                           
    gmysql-host=127.0.0.1                                                                                                   
    gmysql-user=user                                                                                                 
    gmysql-password=pass                                                                                             
    gmysql-dbname=database_name 
    and restart pdns i get this error:
    Oct 22 22:43:34 Archlinux pdns[3337]: Caught an exception instantiating a backend, cleaning up
    Oct 22 22:43:34 Archlinux pdns[3337]: gmysql Connection failed: Unable to connect to database: Lost connection to MySQL server at 'reading initial communication packet', system error: 0
    Socket connection doesn't work either.
    If someone could help me out of this I would be very happy.
    Best regards!
    Jernej

    It works! Thank you! Thank you! Thank you!
    I wasted so many hours combating this...
    I owe you a beer byte! Thx again!

  • 'Alt' with + or - doesn't work

    The adjustment increment of several of the sliders is supposed to be reduced by holding the Alt key down while the + or - key. This doesn't work on my system. I've tried tested both Alt keys with both + and - keys on my keyboard. No luck. All I get is the Windows error tone. Using the Shift key to increase the adjustment increment works as it should. Any ideas out there? TIA, njb

    I consider it's working OK on Windows
    But it's platform dependent !
    To resume :
    Windows   + and -  give  small  increments , shift and + and - give   big increments
    Mac          + and - give  big increments ,  alt and + and - give small increments.
    And the Martin Evenings book is the best LR book for me, though here he's may be not clear enough.

  • RowBanding with BC4J doesn't work

    I want to use rowBanding in a table with a viewObject as its source.
    It doesn't work.
    Could anybody help me?
    TIA
    Francisco Bosch

    Francisco:
    Could you tell me what you mean by "rowBanding?" Are you referring to Swing (JClient) client or HTML client?
    Thanks.
    Sung

  • [SOLVED]Something wrong with Locale, "ÅÖÄ" doesn't work in terminal.

    If you have this kind of problem stated above in the title, or similar, here is what I did...
    Make sure you have correct locale, you'll need a UTF-8 one.
    As stated in the install guide(or beginner's guide iirc) do the following:
    Uncomment  one of the locales in "/etc/locale.gen", it doesn't have to be language pacific if you're only after using UTF-8 which provides more characters than normal ASCII.
    then run "locale-gen". Make sure to set your "/etc/locale.conf" to "LANG=en_US-UTF8" of course you can choose whatever locale you want not just "en_US-UTF-8". After that make sure to reboot, it may also work with just log-out and log-in again, but I did not reboot and neither log-out and when back in. If it still doesn't work, run "locale" and "locale-a" if the output is "C" in each column just redo what I stated above, if it still not work, then you have to consult the manual, wiki and if you don't find the problem use a search-engine and if you still don't find answer here on the forums, the people here is really helpful!
    Last edited by kalle97 (2012-10-01 17:46:16)

    " Okey I uncommented sv_SE.utf8 in /etc/locale.gen ...
    You're supposed to uncomment "sv_SV.UTF-8 UTF-8", then run locale-gen (with sudo), not "sv_SE.utf8".
    That's what I did.
    https://wiki.archlinux.org/index.php/Be … ide#Locale
    ^ Except that you shouldn't use "echo" in this case. That command works well when you're logged in as root, but for sudo, not so much. Check the file with nano and you'll see that nothing changed. For sudo, use tee.
    $ sudo tee /etc/locale.conf <<< "LANG=en_US.UTF-8"
    Note: You don't necessarily need "sv_SV" for those characters to show up. Setting a "sv_SV" locale would make programs show up in Swedish instead of English - unless that's what you want. UTF-8 locales will cover those characters just fine (provided that the font from the terminal actually contains those glyphs, of course).
    So you mean I can have en_US.UTF8 as locale but still write swedish letters? So the problem is with the font or somthing, not the locale?
    If you still have problems, post the output of:
    $ ls -l /etc/profile.d/locale.sh
    $ curl sprunge.us -F sprunge=@/etc/locale.gen
    $ curl sprunge.us -F sprunge=@/etc/locale.conf
    $ locale -a
    $ locale
    Well, I did as the guide told about locale.conf, it doesn't seem to work, even if "locale" outputs correct info now, but I'll try with restarting the X server too, just in case.....

  • GoToAndStop or Play on Frame Label with Video doesn't work?

    I have a video in a frame that corresponds with the label "eight".  i have a button on the timeline with the following code.  i've tried it both gotoAndStop and gotoAndPlay and it doesn't work.  thanks in advance for your suggestions.
    on (press) {
    gotoAndStop(eight);

    use:
    on (press) {
    gotoAndStop("eight");

Maybe you are looking for