DTS Connect. No sound except in speaker test.

Hello. I have a problem.
I get no sound anymore from DTS Connect except when I try the speaker test I get all 5. speakers sound. Window media player can't play any audio files. Need help!
Art.

.-(~)-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------(root@tirion)-
`--# fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: strix 2801 F.... pulseaudio
strix 23753 F.... mpd
/dev/snd/controlC1: strix 2801 F.... pulseaudio
If mpd blocks my audio, shouldn't it work then when I stop mpd? Because that's not the case...
Edit: When I set my mpd audio_output to this:
audio_output {
type "pulse"
name "pulse audio"
I get the following:
.-(~)-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------(root@tirion)-
`--# fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: strix 5730 F.... pulseaudio
/dev/snd/controlC1: strix 5730 F.... pulseaudio
/dev/snd/pcmC0D0p: strix 5730 F...m pulseaudio
And if it helps:
`--# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]
Last edited by strix (2014-04-02 16:48:52)

Similar Messages

SoundBlaster 5.1 no surround sound with the speaker test, but with movies

ISoundBlaster 5. no surround sound with the speaker test, but with moviesO Hello I have a new SoundBlaster XFi Surround 5. USB.
I installed the drivers on Vista 32.
I connected the Soundblaster with an optical cable with my home cinema system.
I checked the 5. speakers option in the Creative Console Starter.
When I will test the surround function by clicking the speakers in the surround test diagramm from the Console.
The front speakers are sending an testsignal, but the rear speakers and the center are silent.
I thought that are settings in the soundcontrol from vista but when I play an Movie with 5. sound, the rear speakers function.
Is ist the optical mode that only support the movie dts signal? Why the Console test from creative doesn't function?
I have further applications but they don't work. Only movies.
Thx

Hi,
S/PDIF?format can only transmit 2 channels of uncompressed audio, which is why you only hear the front channels. For movie dts, an encoded compressed stereo data is transmitted through the S/PDIF optical link to your home cinema system which then decode it into 5. audio.

No sound except earpiece or speaker

suddenly my iphone 4 has no sound except from speaker or earpiece

Well then,
Lets get troubleshooting hey?
1) Slient button- make sure this is not showing orange on the left hand side of the iPhone
2) Take off any case/Screen protectors.
3) Go to Settings>General>Reset>Reset network settings> wait til the phone does its thing and then test by making a call.
4) Turn the iPhone off/on
5) Reset the iPhone- Hold the home button & the silver button on the top of the iPhone down at the same time until you see an Apple (10 seconds or so) then give it a minute-3 before it restarts and then test.
When you turn your volume up on the iPhone..... Does it think the headphones are in the iPhone??
6) Restore the iPhone and do not put any information on it after its done until you test it.
It needs to be tested with no data on it.
http://support.apple.com/kb/HT1414
If that doesnt fix it... Hardware issue... Take it in for service

Speaker Test Fai

Hello everyone,
I currently only a Audigy2 NX and I have my fibre optical cable connected from my Yamaha Model TSS to the back of the USB Optical IN jack. When I try to do a speaker test under the speaker settings menu I only hear sounds from my front left and right speaker. My Sub, Centre and both rear speakers do not make any sounds during the speaker test.
When I click on test on my Yamaha- I get all speakers making noise.
What am I doing wrong?
Thanks
Derek

raymboard wrote:
Yes I am in that group:
audio:x:92:raymond
Hahaha, please give me a penny for every time I've seen this mistake and I'll be a millionaire. You're ignoring *timing*. See that "groups" command that you were just referred to? Run it. Yes, run it, and post the exact results. The *exact* results, not some results you think might be relevant instead. Then reboot your PC, which is far easier to explain than "log out and log in again".

Rear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)

DRear sound goes to front speaker with DDL/DTS Connect (Xfi Platinum)T Hey there,
I just installed the newest modded driver from [url="http://forums.creative.com/t5/Sound-Blaster/X-Fi-Auzen-2-20-0002-0-RC4-2-dated-5th-November-2009/td-p/540790">here[/url] and now I have the problem that when using DDL/DTS Connect (yes I have it activated!): the rear left channel gets output on my front left speaker, and the rear right goes to front right. My externaldecoder is correctly identifying the output stream as DD/DTS and the front speaker and subwoofer works fine. Also when using my Xbox 360 the sounds correctly get to the rear speakers, so this is likely not a problem of my decoder.
Anyone had a similar problem to this? Any idea why this happens?
My system:
Windows 7 x64
Intel Core2Quad Q6600
4 GB RAM
nVidia Geforce 9800 GTX+

H I noticed this doesn't just happen with DDL/DTS Connect. The same behaviour happens when I connect my headphones to the plugs on the back of my computer. The rear plugs don't output anything, while the front plugs have "double" output.
I tried all kinds of different drivers, always removing the previous ones and restarting before trying a new one. Right now I'm with the official 2.8.003 X-Fi driver.
Please, somebody help!

HT1665 I have my Iphone 4S connected to an I home speaker. It is charging through the speaker but I can't get sound. Help

I have my IPhone 4s connected plugged into an IHome speaker. It is charging but I can't get sound out of it. Help please?

Yes, connect your iPhone to your computer, click onthe name of your iPhone then click on the apps tab in iTunes.

X-Fi Fatal1ty No sound from rear or center in speaker tests?

I just installed the X Fi Fatalty Xtreme Gamer and cannot get sound from the rear, center or subwoofer in the speaker tests. All the speakers (Logitech G-5 Gamer)?work playing MP3's but that's it. Installed latest drivers uninstalled an reinstalled card etc?Can anyone help with this before I box everything up and ship it back to newegg? Running Vista 64Message Edited by ovrclkd on 0-23-200807:6 PM

After carefully checking this again, it turns out clicking front left or right the sound comes out BOTH the front and rear. To make things more confusing when all but the line (green) 3.5 jack was unplugged ALL the speakers would work. LONG STORY SHORT I SENT THIS P.O.S. BACK TO NEWEGG FOR REFUND. Every thing works great with the onboard audio, I'm in the market for a 7. that works.Maybe Auzentech? Any suggestions?!! With all the issues the peeps are having someone must be using a card that works out of the box in Vista 64

[SOLVED] No Sound except in mpd

I have a strange behaviour in my sound setup since last week or so. I didn't notice it at first, so I can't tell if it was an update. However I didn't change anything in my configuration. I don't hear any sound from my laptop (a HP Elitebook 8470w), not with the speakers nor with headphones. Except playing music with mpd, this works as usual. I also noticed, that my multimedia keys don't work anymore. Was there any recent change in alsa I missed?
What I tried:
> speaker-test -c 2
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
Time per period = 10.940069
-> No sound
My config:
`--> uname -a
Linux tirion 3.13.7-1-ARCH #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014 x86_64 GNU/Linux
/etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
`--> aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: 92HD81B1X5 Analog [92HD81B1X5 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
~/.mpd/mpd.conf
music_directory "/home/strix/Musik"
playlist_directory "/home/strix/Musik/Playlists"
db_file "/home/strix/.mpd/mpd.db"
log_file "/home/strix/.mpd/mpd.log"
log_level "verbose"
pid_file "/home/strix/.mpd/mpd.pid"
state_file "/home/strix/.mpd/mpdstate"
save_absolute_paths_in_playlists "yes"
audio_output {
type "alsa"
name "Mukke"
mixer_type "software"
device "hw:0,0"
My multimedia keymapping was:
bindsym XF86AudioRaiseVolume exec amixer set Master 2%+
bindsym XF86AudioLowerVolume exec amixer set Master 2%-
bindsym XF86AudioMute exec amixer sset Master toggle
which does not work anymore. Funny thing is, I can modify the volume and mute/unmute my music with the following setup:
bindsym XF86AudioMute exec "pactl set-sink-mute 1 toggle"
bindsym XF86AudioRaiseVolume exec "pactl set-sink-volume 1 +1%"
bindsym XF86AudioLowerVolume exec "pactl set-sink-volume 1 -- -1%"
Last edited by strix (2014-04-03 13:01:17)

.-(~)-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------(root@tirion)-
`--# fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: strix 2801 F.... pulseaudio
strix 23753 F.... mpd
/dev/snd/controlC1: strix 2801 F.... pulseaudio
If mpd blocks my audio, shouldn't it work then when I stop mpd? Because that's not the case...
Edit: When I set my mpd audio_output to this:
audio_output {
type "pulse"
name "pulse audio"
I get the following:
.-(~)-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------(root@tirion)-
`--# fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: strix 5730 F.... pulseaudio
/dev/snd/controlC1: strix 5730 F.... pulseaudio
/dev/snd/pcmC0D0p: strix 5730 F...m pulseaudio
And if it helps:
`--# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]
Last edited by strix (2014-04-02 16:48:52)

Audigy2ZS, calibrate = 5.1, Speaker Test = w

Not sure how else to explain this. I was going to try and search for a similar problem, but I don't know how to explain this!
Audigy 2 ZS
Altec Lansang 25 5. Speakers
I've been using this set-up for ages.
Messed around in my system and hooked everything back up and suddenly had a weird problem. A total reinstall of WinXP SP2 (due anyways) didn't fix it.
When I do the "Speaker Calibration" for 5. speakers all of the surround effects are fine and I can set it up as normal. After, when I click on speaker test, it sounds like this:
Front Left: Front Left
Center: Center (Plus Front Right? Maybe?)
Front Right: Front Right
Rear Right: Front Right
Rear Left: Front Left
I've messed around with the cables in the back but they are plugged into the proper colours.
I just don't understand how the calibrate function gives accurate surround, but then the speaker test (and everything else) is messed up. I just tested the CMSS "Surround" function (playing a song in winamp) and it SEEMS to work.
This is all very strange.

Audyssey builds a sound calibration tool into many home theater system receivers. If you are in the market for a new AV receiver, I recommend that you consider one that has the Audyssey system. The calibration process involves connecting a wired microphone-like device to the receiver, which you place in the center of the listening area. The Audyssey system than plays a variety of sounds from each of the speakers, and automatically adjusts all the audio settings on the receiver for an optimal listening experience.
http://www.audyssey.com/hometheater/receivers.html

FAINT sound from Side Speak

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

No Sound except through headphones

I have an Envy Phoenix 810 PC with an Envy 23 Monitor with built in speakers running windows 7. I can test sound on the computer with headphones and they work and I can test the internal speakers on the monitor and they work but I cannot get any sound externally without headphones. I called hp support and really got the run-around. This is the same problem with my home computer same configuration except it is running windows 8.1. Both computers are new but I am frustrated with this issue. HP support had me run system recovery on my computer at home with no success. Another support person reinstalled all the drivers but still there is no sound except with headphones. Do you have any suggestions? I have a jack plugged from monitor to computer.

Hi,
Envy Phoenix 810 PC is a series of many models/products, what is yours ? How do you connect them ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Any Dolby Digital Live/DTS Connect support?

I'm just wondering if there were any products (USB/Firewire preferred, but PCI also) that support Dolby Digital Live and/or DTS Connect? Specifically, a product that will output bitstream AC3 or DTS to a home theater receiver via SPDIF?
(and I don't mean simply passing thru a DVD's AC3 or DTS, I mean outputting all system sound via transcoding to AC3/DTS bitstreams)
I've got a bgears b-enspirer for a PC, but I'd rather use a Mac for home theater and possibly World of Warcraft..

Hi Mathew
I have a Griffin FireWave. These are no longer made but may still be available if you search. It is a firewire device which give you 6 (5.1) channels of audio output. The outputs are direct speaker connections (L/R C/S LS/RS), so you need to be sure your home theatre system accepts these. It does NOT have optical outputs to a home theatre system and I think it's unlikely that you'll even find something which does.
The FireWave is a great device. It allows me to choose 5.1 audio output in Audio Midi Setup. It can then be driven in 5.1 mode by suitably written applications, and it also gives me full surround sound when I play a DVD.
I have seen some similar USB devices, but none of them claim to be Mac compatible - which seems rather odd to me!
Bob

No Volume Control For DDL & DTS Connect with XtremeMusic under Win7

? I have an X-Fi XtremeMusic PCI card with Windows 7 (32-bit).
I'm using the latest SB X-Fi XtremeMusic drivers for Win7 including hotfix.
I've installed "Dolby Digital Li've & DTS Connect" and it works fine under Windows 7 32-bit, except for one thing. I totally lose software control of volume in Windows when in digital DTS/DD mode. No matter what I set volume level at, it is always sounds?the same (probably max). The only way to control it is manually at my receiver box. If I don't use DTS or Digital Dolby, I can control volume just fine (even in the classic digital PCM mode). My default playback device?under "Manage Audio Devices"?is the?SB X-Fi speakers. However I've tried every combination possible in the audio control panels and nothing will get that volume to work right. So this appears to be a bug in either the digital addon pack or the drivers for Win7. Can anyone else confirm this or possibly have a fix?

K This shouldn't be the case. There's no reason why it can't handle volume control before encoding it into the DD/DTS?signal. PCM digital?works fine with volume. So the problem is somewhere with the addon pack. I have another computer which outputs Dobly Digital and volume is no problem on it. Of course it doesn't use a SoundBlaster.

No sound from center speaker

hello all,i have a inspire 5.1 5200 speaker system. i am getting sound from all speakers except center speaker. the speaker itself is working because i connected it to the right fromt location and got sound out of the speaker. any help with this matter would be greatly appreciated.

You're not the only one;
see the post http://forums.creative.com/creativelabs/board/message?board.id=speakers&message.id=9489
I hope it helps, or at least comforts you in knowing that at least the speakerset can be in order...

No Sound From Center Speaker [Win 7]

$No Sound From Center Speaker [Win 7]? Hi,
I downloaded the Darkest of Days demo and noticed that the speech volume was very low if i positioned it center of the camera. But if i positioned it on the left or right of the camera, the speech volume would increase. I found it strange.
I closed the game. And ran my speakers through window's speaker test. Every speaker responded with a sound. Unconvinced, i opened a few songs. That's when i noticed the center speaker wasn't producing a sound. Even on 5. content (movies & music) the center speaker wouldn't work.
**bleep**, no wonder those AC3 movies had low speech and i had to manually boost the speech volume. I noticed the low sound in games before too...but i attributed it to the 5. surround thing. Guess i was wrong!
System Rig:
Intel Core 2 Duo E6400 @3.2Ghz
Gigabyte P965-DS3
[color="DarkOrange">ATi HD4850
Twinmos 3xGB DDR2 800Mhz + GB OCZ 800 MHz
Zalman 9700
Creative Audigy2 ZS
Creative Fatalty Gaming Headset
250GB Seagate SATA-II 7200.0 8MB
Enermax 535W PSU
Logitech X-540 5. Speakers.

Hi
Can you clarify that are getting the voice when you play the DVDs/CDs?If you are not getting the voice and you are getting the sounds only? Then there could be some connectivity issue for Center Speaker.Pl check the connections .. Regds Balu

DTS Connect. No sound except in speaker test.

Similar Messages

Maybe you are looking for