DTW-Wrong template-Business Partner

Hi,
While performing DTW import i am choosing Business partner as object in 1st step but when i see in the next step Businee partner groups is choosen instead of Business partner
What could be the reason
Please help
Thank you
Md.nazeer Shaikh

HI Nazeer,
     Check your Patch Level of SAP Business One and the DTW Version, i.e The Patch Level should match with DTW Version, Take The DTW From Where you Have the downloaded the Patch
Reply if still problem Persist
Mohamed Zubair.N

Similar Messages

  • DTW Error in Business Partner Group

    While uploading Business Partner Groups, what  should be the code to be given in the Template
    I am mentioning 'S' for Supplier and "C" for Customer but it is giving the error as follows
    " is not a valid value for field 'Group Type'. The valid values are. 'C' - 'Customer Group','S' - 'Vendor Group' Application-defined or object-defined error65171 "
    Let me know your suggestions

    Hello Ranjith,
    It is cool to know that Business Partner group can be imported to SAP B1 and I am sure it is possible. Yes, you can create DI template using advance option in DTW. It is funny that someone did not know that previously. So do not easy to give point for him, make sure the answer 100% correct and solve the problem we have. Doing a lot of replies and asking will waste time.
    The using of template created from maintain interface from advance, e.g. business partner groups, I think you must use SDK help files as a guide how to fill the data in the field/object.
    Current problem solution to your error is using bbpgt_customergroup and bbpgt_vendorgroup in the type field or column when you want to import BP customer group or vendor group.
    Rgds,
    Rgds,

  • Say me error bank account in data transfer business partner

    I need to load the data of master data business partner, but it to say me a error...that it bank account is missing application defined or object definer or object-defined error obj.
    My error is account bank, but i don't know what the field is... I used the all template business partner, maybe missing account bank in the parametrization o something same??...
    ¿someone Know it?. and I hope that if You say me the step for to begin a new company in sap business one, yet I load data chart account ...
    Edited by: mary merecias on Oct 8, 2010 1:35 PM

    Hi Mary.......
    You have to initially do some settings. Go to Administration --> Setup --> Banking --> Banks --> Define Bank Code and its Description here.
    Again Go to Administration --> Setup --> Banking -->House Banks --> Select Bank Code you created and give the bank account and its GL to be hit at the time of outgoing payment.
    Again Go to Administration --> Setup --> Banking --> Banks --> Select Bank Account in the respective field.
    Then Go to Administration -->System Initialization --> Company Details --> Basic Initialization Tab and select this House bank account at the bottom given option for House Bank account.
    Then try to import BP through DTW. This will definitely solve the problem you are facing...
    Regards,
    Rahul

  • Error in DTW Business Partner Template

    Hi Experts,
    I'm getting an error "Invalid DebPayAcct" while uploading the data to Business Partner through DTW. I'm using SAP 2007B PL08.
    Please suggest me why this error is appearing. What is DebPayAcct?
    Thanks in advance.

    Hi,
    It is a control account which links BP to G/L
    before assigning any account code here please make sure you have checked the option as control account for the particular account in Financial>Chart Of accounts
    Hope this helps
    regards
    Md.nazeer Shaikh

  • Is there a DTW template for Business Partner Catalog Number imports?

    I could not find it, quite possible may have overlooked it. Tried to enter the BP catalog numbers against the base items manually. That took a long time and afraid, any repeat of data entry will kill me. So it is best to have a DTW import template. Please point me to where it is hidden?
    Thanks.

    Check this first:
    Upload BP Catalog
    Thanks,
    Gordon

  • DTW - Update Business Partner

    Hi all,
    I have import some BP master data , but i have to change the 'Cardcode'. Is that possible?
    Thanks in advance.

    Hello,
    Could you describe more detail what template you have used when importing business partner master data beside business partner template ? I usually use business partner, contact employees and BP address. if I import the wrong data (incorrect data), I usually re -import the data after delete the existing BP master data. I just use these queries :
    delete from OCRD where cardcode between 'cust1000' and 'cust3000' 
    delete from CRD1 where cardcode between 'cust1000' and 'cust3000'
    I consider the update existing object task can also be useful feature in DTW to correct the incorrect data in database after importing but give consideration to record key.
    Rgds,

  • DTW BUSINESS PARTNER IMPORT

    Hi all,
    I've been attempting to import customers to a database and I seem to have mapped all of the fields except I can't seem to get a "state" in the mail to section of the card.
    I looked at the choices available when mapping in the DTW but I'm unsure how to bring this in.  Everything else seems to work but my template doesn't have anything on it.
    Thanks in advance!
    Mike

    Hi Mike,
    Check this thread DTW for exporting business partners and Items to see something related to you.
    Actualy, state1 and atate2 fields are the fields define Bill-to and Ship-to (Mail-to) State.  They link to another table OCST.  That is why you can not find the state in Business Partner template.
    Thanks,
    Gordon

  • DTW : Business Partner without PAN No.

    Dear All,
    client having lots of customer with having PAN No. When i Data Trasnfer from DTW of Business Partner then its giving me an error :
    PAN No. must be provided with the business partner if the subject to withholding Tax Checkbox is selected.
    after that i unselect the with holding tax from general settings.
    then again i try but its giving me same error.
    Please help me regarding for the same.
    Thanks
    Mohit

    Do you want to add these two fields to DTW template ?
    After login DTW,Tools---> maintain interface,Select Business Object,oBusinesPartner,
    expand tree,ensure udf's fields are in tree,right click business object,select Create template for this structure,
    save the template.
    Import datas to busines partner master.
    Edited by: Jeyakanthan A on Sep 1, 2009 4:48 PM

  • DTW Problem - Business Partner Upload

    HI everyone,
    I have a question regarding the upload of business partner in the DTW. I am using two templates the Business Partner and the Business Partner Address. After the upload process, only the first record has been successfully uploaded according to the LOG File and the succeeding record has an error.
    "An account with the same code already exists.(OCRD.Cardcode). '200002'Application defined or object defined error 65171".
    But when I look into the database no record has been added. I see to it that the Test Run box is also unchecked.
    What seems to be the problem?
    Thanks in advance..
    Malu

    Hi Gordon,
    Here's the sample data that we used during upload. Only the first record has been uploaded successfully according to the Log File but when we try to see the database, there was no data uploaded even if we unchecked the Test Run.
    Business Partner Template
    cardcode = 200000
    cardname = SMC-CKAG
    cardtype = cCustomer
    city = Parañaque, MMnla
    country = PH
    debitoraccount = 140000
    federaltaxid =  000-000-034-000
    groupcode = 100
    vatliable = vExempted
    Business Partner Address Template
    addressname = 2000000 - SMC-CKAG
    city = Parañaque, MMnla
    country = PH
    street = jardine davis cpd. km14 west serv
    Thanks in advance
    Malu

  • How to import balance for business partner by DTW

    Hi all .
    Now , I want to import balance for Business partner by Data trasfer workbench , but I don't know use template ,
    Please help .

    Hi Tranba,
    I would advise using the Service AR Invoice/AP Invoices to import balances of the Customers & Vendors.
    By doing this you will be able to accept/make payments against these balances which you will not be able to do if you import the balances using Journal Entries.
    To import debit (positive) balances of your customer, use the oInvoices template in DTW. Otherwise for credit balances (balances where you owe money to customer) use the oCreditNote template.
    Simlarly for Vendors, use the oPurchaseInvoice template (credit balances) & oPurchaseCreditNote template (debit balance)
    Hope this information will help you in uploading the balances as per the requirements.
    All the best!
    Regards,
    Gyanesh

  • Updating Template Details During the Creation of Business Partner

    Dear ABAPers,
           I am working in SAP CRM 5.0.I am creating the Business partner Using the Transaction code
    'BUP1'.My Requirement is at the time of saving the Business Partner i want  to update the
    Template Details.I tried with the BAdI  'BUPA_TEMPL_UPDATE' .But this BAdI does not contain the Template Parameters.How to do this it is very Urgent Requirement.Please help me to solve this problem.
    Thanks & Regards,
    Ashok.

    Hello Ashok,
    In CRM5.0 IC webclient, I used FM 'BUPA_TEMPLATE_SAVE_TABS' to save information regarding Business Partner Template.
    It worked for me. Check if can help you too.
    Kind regards,
    Bruno

  • DTW Business Partner Properities (QryGroup1)

    Hi
    I am attempting to test importing Business Partner Properties but keep getting an error.  The error is:
    "is not a valid value for field 'QryGroup1'.  The valid values are: 'Y' - 'Yes', 'N' - 'No'Application-defined or object-defined error65171
    Now I have tried every combination of Y, N, Yes, No and cannot get the data to import.  Am I missing an enumerator or something?
    Appreciate your help
    Andrew

    Hi Andrew,
    Since the 2005A version of SBO, the DTW uses the same enumerations as the SDK. This means that a simple Y/N field needs to be set to either tYES or tNO (pretty confusing huh! ).
    These enumerations can be found in the SDK HelpCenter documentation (under the DI API reference section). The SDK can be installed from your SBO CD or from a full patch (eg 2005A SP1 Patch 10).
    Kind Regards,
    Owen

  • DTW problem when updating business partner

    Hi Experts,
    I want to update business partner master data via DTW.
    I only want to update the Remarks.
    In my import file only the fields RecordKey, CardCode and FreeText are filled.
    Example:
    RecordKey: 1
    CardCode: C20000
    FreeText: My Remarks
    The import is successful and the remarks were filled but the DTW has also updated other fields in the business partner master data.
    Before update via DTW the business partner has no payment methods included on the payment system tab but after update via DTW the payment method is included and is defined as Standard.
    Any idea?
    Thanks for help.
    Jacqueline

    Hi,
    yes, the existing payment methods were defined manually before update.
    But the payment method was not included for that business partner.
    Here are some hardcopys before update and after update.
    [BP Master Data Before Update DTW|http://www.sap-potsdam.de/BoneUpload/BP_before_Update.JPG]
    [BP Master Data After Update DTW|http://www.sap-potsdam.de/BoneUpload/BP_after_Update.JPG]
    Jacqueline

  • Business Partner Address Template Import

    We are importing Business Partner Address Template showing error
    "invalid item 'S' in enum 'BoAddressType' oBusiness Partner

    USe
    bo_ShipTo   for ShipTo Address 
    bo_BillTo  for BillTo Address

  • Wrong business partner entered in the transaction

    Hi!
    Wrong business partner was used in securities contract and so many postings like valuation has already been executed/posted. Is there a transaction that would allow me to change the business partner used? Or should I perform migration steps by creating new contract?
    Would appreciate your suggestion on what's the best way to correct the wrong BP.
    Thanks,
    Chaikaru

    Hi,
    Definitely you have to reverse the old transaction, else position show wrongly, and you are forced to reverse valuation as the positions are locked for that key date once valuation is performed, and it is locked with each date as and when you perform valuation. Otherwise, the cash flow managment (TPM13) much capable to adjust the cash flow dynamically once you change any previous period transaction data. So no need to reverse other flows, but to be in the safer side by taking back up of existing flows details to compile the new cash flow after changing the transaction.
    If your wrong transaction belongs to long back, better to convince the customer to make a note of that  and proceed further without changing it, instead of unnecessary reversals & rectification.
    Regards
    Prasad AV

Maybe you are looking for