Dual Boot with Leopard and Tiger

I've got a Dual 2 GHZ Power Mac, that I recently put Leopard on. Unfortunately there's a program that I need to used for a job that doesn't play well with Leopard (yeah, I shoulda made sure before the upgrade). What I was wondering is if it was possible to partition part of the system drive and load Tiger back onto it, and then be able to boot from either Tiger or Leopard. That way I can load the programs that are only friendly with Tiger on to that partition.
Or do I need to get another drive entirely and pull the Leopard system drive out?
Thanks in advance

Hi. You can install as many different systems on different volumes/partitions as you wish. They can all be mounted at the same time, and you can select the default system to boot from in System Preferences > Startup Disc - or select at boot time by holding down the Option(alt) key as you Startup. But a system must be the only one on that volume/partition.
Where to put the 10.4 system is more tricky. If you only have one internal drive, it's possible to re-partition it live - but not really a very good idea.
It would be best to install 10.4 on a second internal drive - or a volume on that drive - or on an external FireWire drive.
Needless to say all your data should be well backed-up before starting any of this.
Rather than go through all the combinations - please post again with any detailed questions. Good Luck.

Similar Messages

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Yes as I said before. If your model Mac came with Snow Leopard and you are now running Mt Lion and have Windows installed in a Boot Camp Partition all you have to do is make the Mt Lion partition smaller, take the free space and make it another Mac partition and you should be able to install Snow Leopard into that partition.
I have Snow Leopard, Lion and Mt Lion installed on my MBP. No Windows in a Boot Camp partition because I run Windows XP in a Virtual Machine on both Lion and Mt Lion.

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

Dual boot Snow Leopard and Mavericks or newer

I have a late 2008 Mac Pro running Snow Leopard in order to use my older editing software. I would like to dual
boot with a newer operating system on another partition. Feel really behind the times.
I am hoping I can do this but do not know just how to go about it and maintain my current setup on one
partitions. Do not know that if I try to upgrade operating systems I will be able to direct the new operating
system upgrade to be on the other partition. I know how to create the new partition, just not how to get
a newer operating system on it.
Any help or suggestions would be appreciated.
Kirk

Start by creating a new partition on your hard drive using Disk Utility. Download Yosemite from the App Store. Do not install it on your Snow Leopard partition. Instead change the destination to your new volume.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Dual boot with Mavericks and Snow Leopard on Two different internal drives?

I have a late 2009 quad core Mac Pro running Snow Leopard- it has 4 internal HD's. I want to eventually upgrade to Mavericks. Before I do a clean install of Mavericks on my start up disk that has Snow Leopard OS, I was hoping I could download Mavericks and install it on another clean internal hard drive to test it out before I commit to erasing my main drive and doing a clean install. My Mac Pro meets the minium specs to run Mavericks.
If I install Mavericks on this second internal drive can I dual boot using the option key at start up and elect to either operate in Snow Leopard or Mavericks? What are the concerns or issues I might face if this is possible?
As I have Snow Leopard, I am also unable to produce a Mavericks bootable USB flash drive- the terminal commands don't work with Snow Leopard. With Mavericks installed on a second internal hard drive- will I be able to create a bootable Mavericks USB Flash drive?
Thanks for any advice.
KT

1. Yes.
2. The Spotlight indexes may be rebuilt every time you switch OSes.
3. Yes.
(94046)

Dual Boot Snow Leopard and Leopard

Hi All
i am looking to Dual boot my Intel iMac with Leopard (10.5.8) + Snow Leopard (10.6) for testing purposes.
How do i go about doing this?
I have the Leopard install disc
i do not have Snow leopard yet and the only version i have seen is an update disc you can buy from apple for about £25 is this ok to use or will i need a copy of the full version?
if i need a copy of the full version where can i find it?
my current hdd setup is:
1 partician very large for data about 255GB
+ another 40GB Partician with Mac OS X
I assume i will need to create another partician about 20GB and call it Snow leopard and use the leopard disc to install onto the new partician then upgrade the newly installed leopard partician with the new snow leopard disc??
Thanks in advance
Regards Sam

Apple has managed to fool a lot of folks with their pricing. If you paid the US$129.00 to upgrade your Mac from Tiger to Leopard, then you qualify for the US$29.00 upgrade from Leo to Snow Leopard. If you did not upgrade from Tiger to Leo, you should buy the US$179.00 box set, which includes Snow Leo, iLife '09 & iWork.
All of this is based on honesty and ethics. The Leo disks are the same. The Leo disk in the upgrade does not look for evidence of Leo, at least not to install. You can erase and install with the Leo disk, or install on a virgin HDD that has never seen Mac OS X.
We create dualboot systems when we seed test Mac OS X all the time. SuperDuper will make Sandbox partition and install just Mac OS X and Apple apps. It leaves 3rd party apps, your data and user accounts and settings on your main Mac OS X installation. Then we lay the new version of Mac OS X over the Sandbox and boot into it. So we have the current Gold Master of Mac OS X and the new version that we are testing, and we can boot into either and they both share our data and accounts.
That may be more tricky when you are using different versions of Mac OS X, as opposed to different updates of the same version. For example, Leo and Snow Leo have different versions of many Mac apps. I do not know how they might handle your stored data if they handled the creation of music or photo libraries differently.
Dah•veed

Can I dual boot Snow Leopard and Mountain Lion on one hard drive?

I want to make a new partition and be able to boot to either OS. Is this possible, if so, how? I would think just make a new partition and install the dmg file to that new partition.

@jimmyk11: AppleCare has actually informed me that "No - this MacBooPro9,1 cannot boot Snow Leopard".
It originally came with lion 10.7.4 installed. I have since upgraded to Mountain Lion 10.8 and (today, after a week or so of ML) I reverted to Lion 10.7.4. But now I find I can no longer boot into Lion 10.7.4 from my external FW800 drive (for troubleshooting and housekeeping). So it looks as if the "boot problems" are not confined to Snow Leopard 10.6.8.
Interestingly, I can use this same external drive to boot my iMac (10.7.4) and my older MBP8,3 (10.8) into 10.7.4 - but not the newer MBP9,1.
The MBP9,1 with Lion and Mountain Lion is turning into a disaster when it comes to external booting. If I could, I'd demand a return and a refund. After bottle-feeding Lion for a year, 10.7.4 seems basically stable and can still boot into Snow Leopard and Lion from my external drives if needed. But now I see I have a worse problem: Crippled Hardware. I suspect this bug needs a firmware update - if it is fixable at all.

Dual boot with archlinux and windows issue

Hi again!
This is what i did from the beginning :
windows was already installed and then i installed archlinux after shrinking the windows partition . I made a partition for boot , one for swap and one for root(i wanted to do for home too , but only 4 primary partitions are allowed) . I made the boot partition bootable , and so was windows bootable and i got the message that there are two bootable partitions so it couldn't write the partition table . So removed the bootable tag from windows and left only the boot partition bootable . I then installed the grubloader to boot partition and then i edited that grubmenu and uncomment the part where windows was like it says in wiki. After restarting i could see the menu to choose between archlinux and windows , i chose windows , i succesfully logged in and after restarting again i couldn't see the grubloader and i automatically logged in windows .
Does anyone know what might be the issue ??
Thanks !
Last edited by shak (2009-03-27 20:20:30)

yes i only have one hard rive , i managed to find a solution not that elegant though , i 've installed acronis os selector from windows and i can choose between windows and linux with acronis on boot . If i choose linux i get to the grub menu and i can choose between arch linux and windows . So it seems that the grub menu is still there but it doesn't appear when i boot for some reason .
Last edited by shak (2009-03-27 20:34:40)

Dual boot with lion and mavericks?

Hi Guys,
I want to updgrade to mavericks as well as keeping lion to run my old soundcard { no new drivers will be made } so, I'm thinking of using my external hard drive to try and install mavericks onto and Dual boot my MBP.
is this possible?
Cheers, Iain.

iainwh wrote:
Hi Mate,
I'm currently backing up my hard drive and then I'm going to download mavericks.
After the download completes you get this screen:
Quit without pressing the install button. Go to the applications folder and make a copy of the installer, move the copy out of the applications folder. When the copy is done doubleclick the installer in the applications folder.

Dual boot with WinXp and Arch-Solved

Hi friends,
I was using windows boot loader to boot into arch instead of grub. I used this:
dd if=/dev/hda7 of=arch.lnx bs=512 count=1
to get the first 512 bytes of the partition in which I installed arch and then added a line directing towards arch.lnx (moved to windows partition) in boot.ini. But now after reinstalling arch, when i do the same to get first 512 bytes of the partition, it generates a blank file and hence using that I'm not able to boot into arch. Grub is installed in this partition only. Any hints about this issue.
EDIT: I dont know what was the problem exactly, but after I reinstalled grub by "grub-install /dev/hda7" and then did the above command, it worked fine.

moderator comment: This is a question on Kubuntu installation but it seems to me OP specifically wants to know how to set up his partitions without harming Arch. As long as the discussion remains about Arch Linux this thread can stay. I'm going to have to move this from Installation to Newbie Corner.
Annorax wrote:I assure you that I am doing my own research. I am new to Linux and new to dual booting and was just looking for some pointers and a place to start reading.
Please see this. I advise you to read the links 2ManyDogs gave. You also need to give us more information about your partitions, such as what is mounted where. I suspect you only have primary partitions and will need to convert one into an extended partition.

Can I share files between dual-boot Snow Leopard and Leopard partitions?

Apparently one of the cool new features of Snow Leopard is its file system compression. That has me wondering though, if I want to have a single drive with two partitions and install Snow Leopard on one partition and Leopard one the other will I be able to mount the SL partition from Leopard and read/edit files without causing problems?
It seems like that would not be possible but I thought I'd throw it out here to see if anyone has tried.

As far as I can tell, Apple has applied compression to most of the system executable files in Snow Leopard. However they do not appear to apply it to data files for any applications that I have looked at.
Apples documentation for ditto (go to terminal and type "man ditto" at the prompt, without the quotes) states:
--hfsCompression
When copying files or extracting content from an archive, if the destination is an HFS+
volume that supports compression, all the content will be compressed if appropriate. >This
is only supported on Mac OS X 10.6 or later, and is only intended to be used in >installa-tion installation
tion and backup scenarios that involve system files. Since files using HFS+ compression
are not readable on versions of Mac OS X earlier than 10.6, this flag should not be >used
when dealing with non-system files or other user-generated content.

Questions on dual booting with win8 and efi

Hello folks,
I have windows 8.1 set up on /dev/sdb in efi mode and would like to install arch linux on /dev/sda
Fast startup on win8 is disabled aswell as secure boot.
Now, my questions:
1) Do I create an efi system partition on /dev/sda or do I use the one windows created on /dev/sdb?
2) Just to make sure, I still need a /boot partition outside of LUKS even when using an efi system partition, don"t I?
cheers,
StR@ng3r

For question #2 I believe the answer is yes. See here: https://wiki.archlinux.org/index.php/Dm … Partitions

Ac100 dual booting with Android and Archlinux

Hi I am trying to install Arch on my Toshiba AC100.
I installed Android already, bit i don't know how and where to install Arch linux.
I followed this tutorial.
https://code.google.com/p/cm-paz00/wiki … Guide?tm=6
(and I made 7th partition to install Arch.)
and I compiled kernel already following this -> http://ac100.grandou.net/kerneldev?&#ma … git_kernel
and I read this -> http://ac100.grandou.net/faq?s[]=dual
but i don't know how to 'flash'!
I really need your help.;D

It's an ARM-based device, so you can't install Arch Linux, you need Arch Linux ARM, a separate distro: https://bbs.archlinux.org/viewtopic.php?id=153431

Dual Booting with the MacBook Pro

I know that on the iMac you can do a dual-boot with PC and Mac, but I am trying to find out if you can do it on the MacBook Pro. Does anyone know?

hi abbyt - Welcome to Apple Discussions!
if you mean dual-boot btw OSX and WinXP - you sure can. apple provides Bootcamp for precisely this reason and it works very well...
http://www.apple.com/macosx/bootcamp/
if you mean dual-boot btw OSX and some kind of Linux - i have less experience there, but i think its possible. perhaps the easiest way is to use Parallels Workstation (but that's not really dual booting in fact - it's virtualization)...
what "2nd" OS were you thinking about? cheers

Can I dual boot with MAC OS/X and Windows

What is the best way to configure a dual boot on my MAC Bookpro laptop? Also, can I dual boot Windows 8 and MAC OS?

The first alternative is a dual-boot arrangement between OS X and Windows provided with OS X.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Dual Boot with Leopard and Tiger

Similar Messages

Maybe you are looking for