"Dual Core Center does not support" error msg on K9N Platinum

Hi,
I just formated my system and installed all the drivers as I usually do. Last thing I installed was the Dual Core center. I cant make it run as I get "Dual Core Center does not support!" error message. I have an Athlon64 X2 4200+ with the latest cpu driver from AMD web site. Any idea on how I could make Dual Core Center work?
Thank you.

Oh ok.
Well on the CD there is a Core Center, but on the site if you go deep into the specific motherboard download section there is a Dual Core Center. I guess it is for dual CPUs.
I've download the AMD X2 Driver. I just wanted to use the Cool'N'Quiet option, since I was told that I needed the "Core Center" for that.

Similar Messages

DualCoreCenter error - "Dual Core Center does not support!"

Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
Anyway, I let it do the repair and install itself.
Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
Can someone shed light on what that means please.
Thanks...

It means:
I suck, don't use me!
Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
Have a look through: here

"Core Center does not support your motherboard" MSI P965 Neo Mobo

Hi all,
after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
Thanks and Best Regards
Phanos
PS
My System specs are
Intel core 2 duo 2.13GHz No Overclocking
Twinmos DDR667 3GB (2 x 512, 2 x 1GB)
P965 Neo Motherboard bios version 1.8
Gigabyte 7600GS Graphic card
Enermax 530 Watt
Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
Maxtor 16Mb cache 320 GB hard drive @ SATA-2, no RAID
Seagate 16Mb cache 200 GB hard drive @ IDE, no RAID
BIOS - optimal settings enable USB, 1394 and ACPI.
WinXP + SP2 + all latest Windows Updates

Hi Maesus,
the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
Best Regards
Phanos
I removed your email address to prevent you from getting spammed.
Those wishing to email Phanos, click the email icon to the left below his name.
Frankenputer

K8T Neo - Core Center does not support your motherboard!

I installed the latest version of Core Center utility on Windows XP x64. But if I attempt to run it "Core Center does not support your motherboard!" is displayed. The download website clearly states that Windows XP x64 is supported. The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86.
Any suggestion is appreciated.

Quote from: Kaz Honjo on 02-September-07, 21:33:39
I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
"I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
Support list :
   MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
   MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
   MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
   MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
OS : Windows 98/Me/2000/XP32/XP64
Basically should work...
"I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
go to "Control", "Automatic Profile" and select the right senzor to be used.

Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

Hi Champs,
I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
Example:
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist
Cost center 1000/150402 does not exist on 17.11.2009.
Cost center 1000/150402 does not exist on 17.11.2009.
Please let me know if you have any guess on this. It is very critical issue for me.
Thanks for all your help in advance.
With Best Regards,
Ravi kanth Yechuri

Use 0000150402 not 150402 .
Rob

Dual Core Center- MSI 8800 GTS and MSI P6N SLI Platinum.

I have both the MSI 650i MOBO and the MSI 8800 GTS vidcard. When using an Asus P5B Dlx MOBO and this vidcard, Dual Core Center was installed and displayed the information for the videocard and allowed a mild OC. Now with both MSI products in the case, Dual Core Center only displays the information on the MOBO-- no 8800 GTS information. The tab at the top for the VGA does not bring up anything. ??? I have tried installing the version on each one of the disks that came with each piece of equipment again and it doesn't seem to make a difference, it doesn't work. I downloaded the most recent version of the utility from the MSI site and still get only the MOBO information. How do I get the display for the video card?
Or since the MSI utilities typically are listed on the forums as not being the greatest, what else can I/should I be using instead?
{I put this in the MOBO forum too as it hits both areas...}

Found that AtiTool (latest beta) works on the 8800's. The "find max core" and "find max memory" don't work perfectly though, as they start the overclock and then are supposed to check for errors; they are supposed to stop the adjustment upward when they encounter erros and come back down...... AtiTool just kept cranking it up, although you could visibly see the little 3D screen artifact all over the place. But It gave a good starting place to do the OC manually and then go run the scan for artifacts and errors manually. AtiTool listed the stock core at 513 and stock memory at 792. I was able to take the core up to ~644 and the memory up to ~877. I backed these off some (as you can't run both at max!) and it looked stable at 630 core, 860 memory. Ran through both 3DMark 05 and 3DMark06 without a hitch. Need to check it out with some extended gameplay now.

Core Center does not show up!

HI Guys,
I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
MSI 875P NEO-FIS2R with 1.8 bios
Can anyone help me out? I don't understand

I found it !!!!
The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

Getting file... does not exit error msg when attempting to use the setXSLT method

I am attempting to use a PL/SQL procedure to generate HTML by using the DBMS_XMLQuery.setXSLT and DBMS_XMLQuery.getXML methods. When running the procedure, the following line
DBMS_XMLQuery.SETXSLT(xsuQry, 'hmwebserver/Series47/Modules/Results_View/hmRVTemplateStyle.xsl');
throws an ORA-29532 error with the message '... File... .xsl does not exit'. What does this actually mean, and more importantly, what can I do to correct the issue?
Thanks in advance for any help.

Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

Internet Explorer does not support error page

Hey !
Do you know about a solution to devolp a default error-page define at the web.xml or so that is work together with tomcat, struts and IE.
Because only when I disable zhe friendly error message in the IE it works together.
But the conditions unacceptable to me and my web-tool.
Mathias

kajbj, you're right about this not being a Java programming problem and this isn't the correct place for this query.
But it's a very valid problem; IE doesn't respect the custom error pages served up by the server for HTTP 500 status if this setting is enabled.
horst_skoff, unfortunately you can't do anything about this, it's a browser issue. Read more:
http://faq.javaranch.com/java/ErrorPageInIe
http://support.microsoft.com/kb/294807/en-us
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------

P6N platinum and Dual Core Center

Hi,
When I attempt to use the Dual Core Center I get an error:
0xc0000005 Program failed to start, press OK to end.
I have updated the BIOS, Dual Core Center, Nvidea drivers, .NET framework etc no change.
Tech support told me that the Dual Core Cell chip on the board was bad so I got a second board without change.
I really don't care about the OC'ing features, I want to monitor temps and control fans.
I have tried Speedfan, it does not control the fans plugged to the mobo headers. Neither does Nvideas tool (Nview).
Infact nothing I have tried will control the fans.
Suggestions?
(Aside from returning both boards and going with a different brand)
Components List:
MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX
EVGA 256-P2-N740-LR GeForce 8500GT 256MB GDDR2 PCI Express x16
FSP Group (Fortron Source) AX450-PN ATX12V 450W Power Supply
Intel Core 2 Duo E6600 Conroe 2.4GHz LGA 775 Processor
Crucial 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 667
SAMSUNG SpinPoint T Series HD403LJ 400GB 7200 RPM SATA 3.0Gb/s
SAMSUNG DVD burner
MAXTOR 40GB HDD (PATA, moved frmo old PC for transfer of files)
USB Wireless Network
Windowx XP Home, SP2

Quote from: Maverick0984 on 20-July-07, 22:44:21
I think the program is horrible...don't waste your time with it.
If it works, good! It doesn't tend to fuss.
But if it doesn't work, uninstall it.
CoreTemp and Everest like Jack says are the best.
Fan speeds however your out of luck with. You can submit a report through Speedfan to the author however.

New core center version, not working!

Iv ealier used Core center with success on my old ms-6561 board. Just formated my drive and wanted to download again, but only found this new one and it does not support my board. Where cfan I find older core senter files?

core center does not display the temps correctly. download a program called speedfan. its better than corecenter

Dual Core Center runs with strange noises

Hello
I just bought a new PC: MSI P45NEO-F (Motherboard) and GALAXY 9600GT (Graphic Card).
I installed Dual Core Center since it was provided as an utility software.
As soon as Dual Core Center is running, strange noises come out from the speakers and they never stop until I close the application. I have to switched off the speaker because it is unbearable. Except the sound from the speakers, computers is working OK. Even Dual Core Center with this noise seems to work.
I am not an expert at all.
Does anyone had this problem or would know where it comes from ?
Computer seems to work OK when Dual Core center is not running.
Thanks

Hello
I just had another look at my problem and I noticed that one of the figure displayed in Dual Core Center was in red. It is the fan speed of system1 in the Fan Menu: the number in red was 995 RPM. As soon as the figure goes above 1000 (it does happen from time to time) the figure becomes green and the strange noise stops.
I have two fans in my computer: the CPU fans whose speed is around 1530 and the System1 fan whose speed is around 995 RPM. There are some setup in the BIOS regarding Fans but I guess everything is properly setup.
Anyway is there anything wrong with a fan system1 speed below 1000 ? Why would Dual Core center put the figure in red in that case and make a noise as a warning ?
Thanks for your help/advices.

Mavericks Server; smbd: File system does not support 0x0, time/size attrs

So I recently installed a Mac Mini with Mavericks and Server 3.2.2 in the main office of my company and everything has been going well, minus a few expected bugs, until recently. Starting last week we've been experiencing random intervals where File Sharing stopped working altogether, and I'd been able to reboot and get it running again. Unfortunately, as I'm the Systems and Server Admin, I've been too busy to look at the logs until now (following the degradation of one of the drives in our DAT-Optic RAID system, I figured it was time to make it a priority), and I'm seeing dozens of entries in the system logs regarding the process smbd with file system does not support errors.
Here's an example.
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.131 AM smbd[602]: File system does not support 0X40000, file attrs
As far as I can tell, nothing else has changed in our system except for the fact that one of the drives died and was rebuilt as of yesterday (these smbd problems extend to last week shortly after I updated to 3.2.2 I believe). Any help would be much appreciated. I would normally first attempt a repair permissions to see if the issue is related to a bad plist somewhere but the last time we did that, our ACLs were duplicated across our file share and often incorrectly. I'm not sure if it's just me but the last Mac Server software I used was Snow Leopard Server (when it was still a full OS version) and it was infinitely more stable than what I've experienced thus far with Server 3. Anyway, I appreciate any help/advice that can be given and I apologize for the rant.

Been getting the same errors for a while.
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0, size attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0, size attrs
Believe they are related to random disconnects from the file server (10.9.5).

Dual Core Center displaying wrong CPU clock speed

Hi,
I've got the 965 Platinum board and I have overclocked my E6300 Allendale to 2.331ghz (from 1.86ghz). My problem is that the MSI Dual Core Center is showing my CPU as being clocked at 2.997mhz. It seems to think that, because I've upped the FSB to 333mhz, I must have a CPU with a multiplier of 9 instead of the 7 of the E6300.
If Dual Core Center is not reading the CPU clock correctly how can I trust that it's reading the temperature right (which is really the only reason Ihave it loaded at all). I know the CPU is only set at 2.331 because the BIOS gets it right, System Properties gets it right and Intel's Thermal Analysis Tool gets it right. It's only the Dual Core Center that gets it wrong.

Make sure you are using the newest version of DCC.
Other than that, DCC might not be the best tool to monitor your system.
Quote
how can I trust that it's reading the temperature right (which is really the only reason Ihave it loaded at all).
To monitor core tempertatures use Coretemp: http://www.thecoolest.zerobrains.com/CoreTemp/
A very good program to monitor all kinds of stuff ist everst 3.5.

Motherboard does not support core center

I decided to upgrade core center through MSI update. Now when I try to start it get message "Motherboard does not support core center" Tried uninstalls of AMD drivers as well as core center to no avail. the old one worked ok, anyone know where I can get it?
PC specs
MSI K8t neo
Win xp pro SP2
Amd 64 3200
2 gig corsair ram
Asus Radeon xp800 Platanium
2x Western digital 10 gig sata drives
Pioneer DVD
Asus tv tuner
Creative x-fi elite pro

Quote
is that ok with you Sir?
It's your pc, not mine. So, yes, it is alright with me. I don't bother when people mess up things for themselves. We're always here to help things get on the road again... and we're happy to do it.
Just try to see what I'm telling you: if you do not experience serious trouble, then leave things alone. Also, always try to decide if a program is really necessary or that you can do without it. For example, if you use corecenter mainly as a monitoring tool, I'd advice you to uninstall it and not to install any monitoring tool at all. You can set Cool & Quiet in BIOS and make it work by installing the AMD CPU driver (you already did, I suppose) and set power settings to Minimal power in Control Panel. This way, you system will not overheat and if it does, it will shut down automatically. Corecenter doesn't contribute to these functions in any way.

"Dual Core Center does not support" error msg on K9N Platinum

Similar Messages

Maybe you are looking for