Due Date in Invoice

HI All,
when i am adding an invoice with posting date - 03-03-2010 and due date - 03-04-2010 system is not allow to add it
please tell me the solution.
postinge period defined as:
FY09-10
posting date : 01-04-09 to 31-03-2010
due date : 01-04-09 to 31-03-2010
FY10-11
posting date : 01-04-10 to 31-03-2011
due date : 01-04-10 to 31-03-2011
when i updated the due date in FY09-10 system show an error.
how i van add this document .
Thanks & regard
Manoj S

Hi Manoj S,
you need to extend the due date range of the period that contains the posting date of the invoice to include the due date, for example, for an invoice with posting date - 03-03-2010 and due date - 03-04-2010 the set-up could be:
FY09-10
posting date : 01-04-09 to 31-03-2010 <- contains posting date
due date : 01-04-09 to 30-04-2010<- includes due date
All the best,
Kerstin

Similar Messages

User Exit for Changing Payment Due date for Invoices

HI Gurus,
Could anyone suggest a User Exit which cane be used for Due Date calculation an all Invoice Entries like MIRO, FB60 etc.
This is required for overwriting the Due Date determined via payment terms by a Particular day in a week. (Eg: Friday)

Hi
User exit
Re: user exits in MM
Regards
Ram

To find cash discount due date for invoice

Hi,
is there any fuction module to get cash discount due date using Payment term Zterm, Ztag:1Days from Baseline Date for Payment and Ztag2:Days from Baseline Date for Payment from T052 table.
Regards,
santosh

check the below fuction module.
CALL FUNCTION 'DETERMINE_DUE_DATE'
EXPORTING
    I_FAEDE                          = faede
IMPORTING
   E_FAEDE                          = faede
EXCEPTIONS
   ACCOUNT_TYPE_NOT_SUPPORTED       = 1
   OTHERS                           = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
you can pass the zterm and Days from Baseline Date for Payment from T052 table to correspoinding fields of faede structure .
Thanks and Regards,
pavankumar

Invoice due date

Hi Gurus ,
i want Invoice due date for invoice .
points sure !
regards,
Rahul Deshmukh

Hi,
Can you give bit more details on what exactly you want....
If u want to get the invoices due for a particular date, then go for T. Code VF04 and give the criteria on what you want to select the invoices!
Probably it might help you
Regards

Invoice-wie Due Date List for Vendors

Hi,
Please inform me, if there is an report for vendor informing exact the Due Date for each Invoice Drawn for that Vendor
Regards
Ashwin

Use Transaction Code FBL1N & EXECUTE, then you go for
change layout button,
select "Net due date" field & activate(means get the field from right side to left side).
System will give the due date each invoice wise.
chandra

Report that lists Customer balance, Due date, & Invoice date.

Hello Gurus,
I would appreciate your help on the following question. Points available.
Is there a report I can run in SAP that can show me the <b>Customer Balance, due date, and Invoice date</b>?
Is there anything besides FBL5N?
Thanks in advance!

Please note a customer balance is the total outstanding against a customer, normally totalled at a Company Code level.
Due dates and invoice dates are at line item level, where as Balance is the total of the line items.
If you run a balance report you wont get line item data and if you have a line item report it wont give you balance details.

Regarding first due date

Hi,
How to find first due date for invoice. Anybody has any idea if there is any FM or table i can use to get it? Please let me know.
Rgds
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Jul 12, 2011 10:41 AM

Hi,
This date is calculated either based on the ATP results or after carrying out delivery/transportation scheduling. Please check the stock situation of those materials. If transportation scheduling is active, check the lead time maintained in the determined route as well.
If you press "F1" in that field you will see how the system react on that field.
Best regards,
Rahal.

Query on fetching the no.of days between Invoice date and due date in rtf template embedded BI Publisher Report

Hi Experts,
We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
Please let me know the procedure of how to achieve the same.
Regards,
Rev

it's good for ideas but implementation a bit different
Oracle Business Intelligence Publisher Report Designer's Guide
This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
<?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
where
format is the time value for which the difference is to be calculated
Example:
<?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
returns
-7

Invoice payment due date to friday if it falls on Weekend

Hi All,
I have an interesting requirements in payment terms due date calculation. Say we assign a payment term to customer and Invoice is done. If the due date falls in the weekend ..say 2 july 2014 which is a Saturday. Can we set the system so due date is set to 1Jul 2014 which is a Friday. Underlying business need is when a due date fall on the weekend it doesn't go to Monday but bring forward to Friday. One can argue that Friday is not 30 days but 29 days so this not right.
Thanks

Hi Dick,
Please check below links.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70ccb4af-f7d0-2c10-a0b6-ae3f2738dda2?QuickLink=index&…
Payment Terms Setup Help
Due Date Configuration
Hope this helps
Regards::::
Atul Chakraborty

Invoice payment due date.

Dear all,
I would like to display the invoice payment due date in my SAPscript. I've heard about the FI_TERMS_OF_PAYMENT_PROPOSE function module and thought that it could feet my need. But I'm wondering if there is no other way to proceed since I can't find documentation on the above function module. Also I'm surprise to do not find in standard among the structured tables the invoice payment due date data.
Best regards.
Nozome.

Hi Nozome,
You may look at the following post.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/forums/sdn_jive_forums/thread{74687265616449443d3731303434}.jspa
Cheers
Vinod

How to generate 3 payment due dates& 3 posting against single invoice?

Hello Experts,
Kindly provides some inputs on below requirement.
For example :- In the Utility Bill,
Consumption months: June, July, August
Meter Reading taken in August
Billing Months: September, October, November
Bill generated in August
Consumer receives the bill on September month
Payment Due dates: 12 Sep 2009, 12 Oct 2009 and 12 Nov 2009
Issues-:
1.How to generate three posting against single invoice?
2.How to generate three payment due dates for above postings in three consecutive months since payment due date logic is incremental in nature here, e.g.
1st due date = posting date + 15 days
2nd due date = 1st due date + 30 days
3rd due date = 2nd due date + 30 days
Requirement description:-
The utility generates bill quarterly for domestic consumers. For such consumers, the utility takes reading from the consumers premises after end of consumption period (quarterly ) and generates bill on the 1st billing month (here 1st billing month is September).
In the bill the utility divides total consumption into three parts (considering each part for each consumption month) and calculates all charge heads separately on each part. It however, consolidates and generates a single bill having three rows, each row showing charge heads of each consumption month and also net and gross amount to be given for each consumption month.
Moreover, three postings have to be generated in FICA against that single bill. Also, it provides three due dates to the consumer, each date falling in each billing month, to pay the above three net amounts respectively. Dunning and other activities should be triggered if the consumer fails to pay the stipulated amount by corresponding due date.
Looking forward for valuable suggestions
Thanks in advance
Regards,
Vaseem
Moderator note - question reposted - OP notified of violation Issue on quarterly bill
Edited by: William Eastman on Jun 3, 2010 3:25 PM
Edited by: William Eastman on Jun 3, 2010 5:01 PM

Hello Experts,
Kindly provides some inputs on below requirement.
For example :- In the Utility Bill,
Consumption months: June, July, August
Meter Reading taken in August
Billing Months: September, October, November
Bill generated in August
Consumer receives the bill on September month
Payment Due dates: 12 Sep 2009, 12 Oct 2009 and 12 Nov 2009
Issues-:
1.How to generate three posting against single invoice?
2.How to generate three payment due dates for above postings in three consecutive months since payment due date logic is incremental in nature here, e.g.
1st due date = posting date + 15 days
2nd due date = 1st due date + 30 days
3rd due date = 2nd due date + 30 days
Requirement description:-
The utility generates bill quarterly for domestic consumers. For such consumers, the utility takes reading from the consumers premises after end of consumption period (quarterly ) and generates bill on the 1st billing month (here 1st billing month is September).
In the bill the utility divides total consumption into three parts (considering each part for each consumption month) and calculates all charge heads separately on each part. It however, consolidates and generates a single bill having three rows, each row showing charge heads of each consumption month and also net and gross amount to be given for each consumption month.
Moreover, three postings have to be generated in FICA against that single bill. Also, it provides three due dates to the consumer, each date falling in each billing month, to pay the above three net amounts respectively. Dunning and other activities should be triggered if the consumer fails to pay the stipulated amount by corresponding due date.
Looking forward for valuable suggestions
Thanks in advance
Regards,
Vaseem
Moderator note - question reposted - OP notified of violation Issue on quarterly bill
Edited by: William Eastman on Jun 3, 2010 3:25 PM
Edited by: William Eastman on Jun 3, 2010 5:01 PM

How to change dispaly format of Due Date in BPA Invoice Template (11.5.10)

Hi,
I've modified the Invoice Template through template management in Bill Presentment Architecture (BPA). I copied the default layout and made the format changes, added our company logo etc. The only thing that I'm unable to do is change the format of the date Content Items like Billing Date and Due Date (TERM_DUE_DATE). Does anybody know how I can do that.
Thanks for your help
-Asif

Jassing,
Thank you for the hint about preferences. I didn't think about that.
The date formats are suppose to follow the format setup in personal preferences. But it turns out that there is a bug that just the 'Due Date' in BPA Invoice template is not following that. The other dates are displaying according to the format in preferences. So we'll be applying a patch to fix it. Hopefully that will fix it
Asif

Due date calculation for the credit memo with invoice reference.

Hi,
When we create the credit memo with reference to invoice, the due date for the credit memo is getting copied from Invoice. In this case if the invoice is due on 31.12.2008 and the credit memo is created on 10.09.2009, then the credit memo due date is appearing as 31.12.2008. It should be 10.09.2009 as per the setting in VOFA billing type customisation in "Credit Memo w/vldt".
I would like to know how to customise the below requirement.
If the reference invoice is due after the credit memo creation, the the credit memo should due as per the invoice date.
If the invoice due is past & then the credit memo due date should be Immediate i.e. Due Immediately.
Thanks in advance for help.
Regards,
Nithin

I doubt there is such option. From the past projects I do remember that we made a change in the form to print the document date as 'Due Date' for credit memos. Credit memos were paid at once when they were processed and I think that payment term was copied from the original invoice, which made their due date far in future.

The Credit Memo & Original Invoice do not have the same net due date.

The issue is that for returns of goods from the customer, the credit memo that gets created does not have the same net due date as the original invoice. To accomplish this, in the credit memo, the indicator "V" must be entered in the credit memo field BSEG-REBZG "Invoice Ref". This will make the credit memo due based on the payment terms. In the OSS message 50388, SAP identifies a user exit in SDVFX008 which will fill field BSEG-REBZG with the value "V". Doing this should automatically make the credit memo for returns due the same date as the original invoice.SAP says to do the following:
The function module called by SDVFX008 is EXIT_SAPLV60B_008
Make the ABAP coding in include program ZXVVFU08.
Populate field ACCIT-REBZG with "V"
Despite doing this , we couldnt get the same net due date as the credit memo & Original invoice.
Can anyone help? POINTS WILL BE GIVEN.
Thanks
Anita

Hi Anitha,
Does the value 'V' gets paopulated?.
I mean to ask whether the program goes into the user exit logic?.
Please let me know.
Thank you.
Regards,
Karun M

Wrong due date on vendor invoices

Hi SAP Gurus,
I am facing one issue in due date calculation for Vendor open item.
I have maintained terms of payment in vendor master data in which invoice due date should be 30 days after invoice generation. But this terms of payment is not picked automatically in vendor invoices (it is blank) and system is considering all the open items for payment during Automatic Payment Program.
Need your help to understand why system is not picking terms of payment automatically in vendor invoices when it is already there in vendor master data.
Many thanks for all your help.
Regards,
SATVIR SINGH

Hi,
In invoice is posted through MIRO then terms of payment applied in purchase organization segment of vendor master data has top priority over one which is entered in company code segment.
For items posted directly in FI terms of payment in company code segment is considered.
Moreover if some one edits default terms of payment at the time of invoice then terms of payment entered at the time or payment will be updated in vendor invoice or line items.
If no term s of payment is entered in vendor line item then invoice is due immediately on the base line date of invoice.
Also check document change log in tcode FB04 to ensure terms of payment is not edited after document is posted.
Next payment date you enter while secluding the payment run is important thing to consider for payment to consider in current payment run.
Thanks!
Raju

Due Date in Invoice

Similar Messages

Maybe you are looking for