Dump created while giving numbering series

Dear All,
sytem throws an error message "dump created" while trying to give numbering series in a particular form. Am not able to read full error description, since its come out from sapb1 application within a few seconds
Please help me on the above
Waiting for your valuable response
thanks & regards
venkatesh n

Hi Thangaraj,
thanks for your reply. I have tried to define numbering series, but the same problem persists again
pls do the needful
thanks & regards
Venkatesh N

Similar Messages

Error when creating a new numbering series

I have a problem creating a new numbering series
i received the following error
next invalid serial number message 3535-3
i Controlled a period e the sequential numbering of series
For two period the indicator i the same "Standard" for the restaant period is the year
example
2004    Standard
2005    Standard
2006    2006
2007    2007
2010   2010
i controlled the sequent table
OFPR
OPID
NNM1
OACP
Thank

Hi,
Welcome you post on the forum.
How do you controlled the sequent table ?
Thanks,
Gordon

Getting dump Uncaught_Exception while giving filter values

Hi Friends,
We have recently upgraded the system from BW 3.5 to BI 7.0, and SP17 we have applied.
Now the problem is we are not able give the filter values
while executing queries. It's giving the dump UNCAUGHT_EXCEPTION.
Error analysis:
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
and therefore caused a runtime error.
The reason for the exception is:
Error in BW: Error creating tmp table
How to correct the error:
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
"CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
"HANDLE_UNCAUGHT_EXCEPTION"
Awaiting for your suggestions.
Regards
Udaya

Hello everybody,
we fixed our problem.
It was a customizing issue.
Switch on history in SPRO by "Activating personalization in BeX"
regards
Joerg

Dump created while creating a SC

Hi,
We have SRM 5.0 system (extended classic scenario). While creating a shopping cart and adding free text line items from a punchout catalogue, the system dumps with below error message. The ST22 dump is attached.
Extract from the dump says:
The ITS service "BBPSC04" had to be terminated because the Web AS has sent the following error message: Error message: "Error found in Java-session" Message type: "S"
Any Pointers will be great help.
Regards,
Rajesh

Hi,
Are you running the BBPSC04 (Check Status) through a portal? Since i could not see the dump log and hence no much suggestion can be made further.
Java isn't used much in SC document except in IPC and maybe HTML. Is there any customer field on the SC screen which could possibly injected error dumping the document as well?
If nothing works, report to SAP for investigation.
Best regards.
YS

Short Dump created while modifying a process chain

Hi guys ,
Iam getting a short dump while trying to modify a process chain and it is taking me too short dump where the message is PROCESS HAS NO PREDECESSOR but even when Iam trying to DETAILED VIEW it is taking me too short dump
Can anyone help me out of this issue

Hi ,
I have removed the existing start process and I have checked but there is no Use the same short dump is created again
Please suggest me some usefull solution .

Error while creating document numbering series via SDK add on

Dear Experts,
We receive the following error while creating the document numbering series through the SDK add on
[Microsoft][SQL Server Native Client 10.0][SQL Server]The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Too many parameters were provided in this RPC request. The maximum is 2100.
From the above error message I can suspect the following possibilities
1. The limit for the document numbering must be less or equal to 2100.
2. There is a problem in the coding in SDK where it does not allow more than 2100 lines in the database.
We tried to create manually for the same fiscal year and period indicator disconnecting the add on, the same error occured.
Then we created a seried for a single document with the period indicator for the next fiscal year, it allowed.
After creating the document numbering for the next fiscal year, we were able to create the numbering for the previous year also.
Kindly help us on how to solve the same.
With regards,
Yeshwanth Prakash

Hi
You have, as far as i can determine without seeing the template,defined no Part Appraiser Column (PAPP) in your template. But you have defined a function on the template to automaticly default the part appraisers.
On the Appraisal document persons (appraiser / appraisee) are getting defaulted as part-appraisers although no part appraisal column excist,and therefor 00 Part Appraisers are allowed. This gives the error. Remove the Part Appraisers default functionality from the template and this problem will be solved.
FYI: The reason why this doesn't give a business check error is that the functions to default participants are BAdI's and we have no means of determining wether or not a BAdI implentation will create an inconsistency on the appraisal document.
Also, the reason that it occurs as a S message and not as E or W is because of programming restrictions in combination with messages. All errors on the Appraisal Document will come as 'S' messages.

Numbering Series

Dear All
I am working on SAP Business One 8.8 PL05 and am facing problem while adding numbering series, have added Period indicator as 11-12 bt its giving error as 'This entry already exists in the following table'. If any of you know's how to resolve this error then please lemme konw as soon as possible ASAP.......
Thanks & Regards
Annu

Hi annu,
Its not cos of same period indicator, pls check with fiscal year and mentioned code.. and try to check whether ur using financial year or fiscal year..
regards,
Vignesh

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Dumping core while using rwFactory()- create( )

hi Guys!!!
I'm not sure if this is the right forum... but please help..
Please have a look at the code.
int main(int argc, char *argv[])
std::cout << "Begining of the program .. " << endl;
RWBag dummy; //might have to create a dummy RWBAG to link the correct code;
std::cout << "This program creates an RWBAG using theFactory"
<< std::endl;
RWBag* b=(RWBag*)(getRWFactory()->create(__RWBAG));
b->insert( new RWCollectableDate ); // Insert today's date
b->clearAndDestroy(); // Cleanup: first delete members,
delete b; // then the bag itself
return 1;
I am using Roguewave version 8 on Solaris 10.
The problem is the prg is dumping core while creating the RWCollectable object using (getRWFactory()->create(__RWBAG));
I'm not sure if it the type casting or in the create itself.
Thanks,
Rahul.

It may be that an exception is being thrown that your not catching. Coherence exceptions need to caught as Exception::View not Exception::Handle. If there is an exception it's text should help identify if there was an issue running the updated server side.
Mark
Oracle Coherence

4002 - first define the numbering series in the administration module

Hi all,
I have created the User tables and object type as Document and Document Rows.
While adding the records thru DI API objects using SAPbobsCOM.UserTable i am getting error like
4002 - "first define the numbering series in the administration module".
Is it possible to add the Document and Document rows tables or Master Data and Master Data rows tables thru DI API objects.
Please confirm.
Regards,
Benjamin Rosary.B

As far as I know this is not possible. You can't add to a table that is not of type "No Object" using the DI API.

Error in Opening Document - error messgae as "First Define Numbering Series

Dear All
With new financial year starting one of our customer define new posting periods (12 periods for each month) and assigned one period indicator for all the periods. They also defined some user groups and assigned this groups to document numbering series for that user. Now while opening the document (e.g. Sales Order) for that user system displays the following message:
"To generate this document, first define the numbering series in the Administration module"
Therefore user can not open the document. Same procedure was followed in previous period also without any error.
Please suggest procedure to be followed.
Thanks & with regards
Aloke Bandyopashyay

Hi
PLs find this link takes to you to authorization Document, as you said cant be given full authorization to all, But you should know proper knowledge before giving authorization bcoz all modules are interlinked. SO pls go through the document first :
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=OBJECT&_HIER_KEY=701100035871000529280&_SCENARIO=01100035870000000183
https://websmp208.sap-ag.de/~sapidb/011000358700001216762007E/HowTo_DefAut_2007A_B.pdf
For to access Both u should have S user Id.
Giridharan V

Unable to edit First no in Numbering series

Hello Experts
One of my client has entered data in Purchase Order for first time .
First PO in the database .
But unfortunately numbering series wasn't set , and by default general document numbering had 25 as its next no for PO.
And user added the document with out checking the Document Number.
Then tried to edit the " First No " in numbering series , but it is not allowing me to edit that coloumn.
I was trying to edit because , as the user started from 25.i would like to make the first no as 25.then that particular series will be closed .
Is there any work around so that i can edit the first no . or any other work around that i can get rid of this scenario.
Regards
Krishna Vamsi

Hi Krishna,
I have a solution to your issue. Navigate into Administration --> Systerm initialisation --> Document Numbering double click on the purcahse order series # --> Series -Purchase order- setup.
Change the Period indicator from the existing row default and define a newname and flag (tick) the LOCK checkbox and then create a new line by right clicking and add row with the required First No., set the period indicator to Default and set the new line "set as default".
The PO will start with the new numbering series.
Regards,
Rakesh N

Error while giving permission to the users

hi..
while giving the grants to the users I have created, it is showing "Account not found"..
I have logged in through the credentials of Administrator and went to Administration--> manage interactive dashboards
There when i am clicking on Show Users and Groups, then i can see all those.
But when i am trying to give the users the necessary permissions, it is showing the above error.
please help...

Hi,
I dnt understand ur 1st question.what u meant by uniq filed where u create user?
and for ur second question, u can check all ur users from dba_users.for their privilages, to check on permission, it's dba_tab_privs. I dnt knw if this is what ur asking for but here is the script.
SELECT t.grantee "User ID",t.privilege "Privilege",o.object_type, o.object_name, '' column_name
FROM dba_tab_privs t, dba_objects o
WHERE t.owner = o.owner
AND t.table_name = o.object_name
AND NOT o.owner IN ('SYS', 'SYSTEM')
AND NOT t.grantor IN ('SYS', 'SYSTEM')
AND t.grantee in (select username from dba_users
where username not in ('SYS','SYSTEM','))
AND NOT o.object_type IN ('QUEUE', 'TRIGGER', 'DIMENSION', 'CLUSTER',
'INDEX', 'INDEX PARTITION', 'INDEX SUBPARTITION', 'TABLE PARTITION',
'TABLE SUBPARTITION', 'JAVA CLASS')

Abap dump error while release Production order

Dear Gurus,
Abap dump error is creating while release production order , pour some light on this issue.
Regards,
Kamal

Hello,
use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
Best regards,
Andrea

Dump created while giving numbering series

Similar Messages

Maybe you are looking for