Dump Error In Material Master Transaction

Dear Experts,
When i am creating or changing any material master record, i am getting the below dump error while saving the material.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLC1F2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLC1AX " in include "%_CESPCL
     " in
    line 77:
    "Component called ATWRT already exists. ."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "SAPLC1F2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The following syntax error was found in the program SAPLC1AX :
    "Component called ATWRT already exists. ."
Trigger Location of Runtime Error
    Program                                 SAPLC1F2
    Include                                 LC1F2U10
    Row                                     594
    Module type                             (FUNCTION)
    Module Name                             C1F2_SUBSTANCES_SAVE_TO_DB
Can you please help me out with this?
Thanks,
Praveen

Hi,
I have not made any changes in the Enhancements/BADIS which are related to ATWRT, but created one ZTable for linking the
Vendor (LIFNR), Material (MATNR) & Manufacturer (ATWRT).
Here are the additional details of the dump which i am getting in MM01/MM02 transactions for your reference.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of the dump
Can you please help me with this?
Thanks,
Praveen
Edited by: Rob Burbank on Feb 2, 2011 9:29 AM

Similar Messages

UOM error in Material master.

Hi
When we log on to Spanish language, we are getting error in material master for Unit of measure, that the unit of measure has not been created in the language ES. But same UOM has configured in EN language and its working fine for material, while in Spanish language it appear as *** with error details,
Could you please suggestu2026
regards
Vanraj

Hi,
Extactly you are right..you got to Logon in Languange ES and create the required UOM in t-code CUNI...
this shuld solve the issue..try and revrt back..
Also,In CUNI on top menu Go to-Translation-UOM here maintain Source lang to Target lan
Reg,
JJ
Edited by: Jagsap on Apr 20, 2010 4:10 PM
Edited by: Jagsap on Apr 20, 2010 4:15 PM

Attaching u0093material photou0094 on the user tab of the material master transacti

All,
We are exploring a solution for attaching material photo on the user tab of the material master transactions - MM01/MM02/MM03 in ECC6.0.
Please review the questions outlined below from the client -
- Is it feasible to attach a photo of material to the user TAB of transactions MM01/MM02/MM03.
- Whats the performance impact on the online transaction?
- Whats the storage impact of having photo attached to the materials?
- Where and how is the gif or jpg image of the material stored? As a file on UNIX?
- Can a small photo area be added user tab?
- Does this require extensive programming or configuration to achieve this?
- How much of time would something like this require to setup?
If anyone has worked on similar requirements, request you to respond at the earliest.
Regards
Deepthi.

Hi Deepthi,
- Is it feasible to attach a photo of material to the user TAB of transactions MM01/MM02/MM03.
Yes its feasible
- Whats the performance impact on the online transaction?
There would definitely be impact on performance. The impact would depend on the Size of the Image file to be uploaded. So you need to do a performance analysis for various Size of Image file & select the one which doesnt have much impact on performance & also has a good quality resolution of image
- Whats the storage impact of having photo attached to the materials?
SAP as such wont have any impact except the additional space required to store the images
- Where and how is the gif or jpg image of the material stored? As a file on UNIX?
You can store it using transaction SMW0
- Can a small photo area be added user tab?
Programmatically yes. It would be a custom container in which you would be uploading the photo
- Does this require extensive programming or configuration to achieve this?
No idea whether it can be achieved through some config. Settings.
Programmatically its possible. Yes, it requires extensive programming. You need to maintain a table with Material No. & photo name. Accordingly you need to build the logic to upload the image. This works mostly on the Class CL_GUI_PICTURE & its methods.
Sample programs
SAP_PICTURE_DEMO
SAP_PICTURE_DEMO_ICON
RSDEMO_PICTURE_CONTROL
- How much of time would something like this require to setup?
Well if the image size is defined, then it should take max. 15 working days to develop the same
Best regards,
Prashant

Exchange rate error in Material Master Upload (MB1C - 561)

Hi.
While uploading material through MB1C with movement type 561, I am getting following error
My company code currency, material master currency is EUR but still following error is occuring.
"Enter rate EUR / rate type M for 01.10.2010 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction."
Why system is asking to maintain exchange rate for same currency?
What are the settings that I should maintain? Thanks in advance.
Regards
Anand

Hi,
My material master currency is EUR
Both Stock and Upload GL accounts currency is EUR
Co COde currency is EUR
Where else is the revevant Settings?
Further, I uploaded one material on 25/Oct/2010 well. But when I am trying to upload the same material again on or before or after
25/Oct/2010 system is giving exchage rate error
What could be the remedy?
Regards
Anand

ERROR IN Material Master Generation (AII 4.0)

Hi all,
We're working with Auto ID 4.0..
When we try to create products from R3 ECC 5.0 we find errors, the message is well sent from R3 to XI and then to AII but when the proxy is executed is thrown an ABAP exception.
These are our errors:
Data cannot be maintained for set type COMM_PR_UNIT
Data cannot be maintained for set type COMM_PR_SHTEXT
Data cannot be maintained for set type COMM_PR_GTIN
We've done the configuration on AII about hierarchy 'AIN_BASE' and category 'AIN_MATERIAL'...
Do we miss anything??? Please help us..
Thanks in advance

Hi
we are trying to send material master data from ERP to SAp AII system through XI. I have seen in the integration repository there are standars interface mapping and mesage mapping exists. But not clear on how to do configuration in XI nd which adapter we need to use in reciever communication channel and also the setting nede to be done in AII
can you please help me in this? Just give me the breif description of steps that need to be followed in ERP side SAP AII side and Xi side
thanks

Dump Error in MAterial Consumption Report

Hi all Gurus
[1] I need help from your side i am doing one material consumption report in that i did all thing but it is giving me dump error while i was using sort in to ALV
so please any one help me out this .......
[2] I am Printing sum of quantity in Header area of smartform it is printing with using comma e.x 43,000 but in body area it is showing with decimal point
e.x 43.000
Following is my ALV reports code please check it it is giving me short dump while using sort ..............
I am very much in neeed
Thanx for your suggestion in advanc.....
and god bless you............
*& Report ZCONSUM
REPORT ZCONSUM.
*& Report ZCONSUMPTION
TYPE-POOLS : SLIS.
TABLES:marc,
 mara,
 makt,
 mard,
 mbew,
 mseg,
 mkpf.
TYPES:
 BEGIN OF s_mseg,
 mblnr LIKE mseg-mblnr,
 mjahr LIKE mseg-mjahr,
 zeile LIKE mseg-zeile,
 bwart LIKE mseg-bwart,
 matnr LIKE mseg-matnr,
 werks LIKE mseg-werks,
 menge LIKE mseg-menge,
 budat LIKE mkpf-budat,
 mtart LIKE mara-matnr,
 matkl LIKE mara-matkl,
 END OF s_mseg,
 BEGIN OF s_t001w,
 werks LIKE t001w-werks,
 name1 LIKE t001w-name1,
 END OF s_t001w,
 BEGIN OF s_mara,
 matnr LIKE mara-matnr,
 mtart LIKE mara-mtart,
 matkl LIKE mara-matkl,
 END OF s_mara,
 BEGIN OF s_makt,
 matnr LIKE makt-matnr,
 spras LIKE makt-spras,
 maktx LIKE makt-maktx,
 END OF s_makt,
 BEGIN OF s_calc,
 matnr LIKE mara-matnr,
 mtart LIKE mara-mtart,
 matkl LIKE mara-matkl,
 maktx LIKE makt-maktx,
 menge_t LIKE mseg-menge,
 menge_t1 LIKE mseg-menge,
 menge_con_261 LIKE mseg-menge,
 menge_con_262 LIKE mseg-menge,
 menge_con1_261 LIKE mseg-menge,
 menge_con1_262 LIKE mseg-menge,
 menge_ret_291 LIKE mseg-menge,
 menge_ret1_291 LIKE mseg-menge,
 menge_ret_292 LIKE mseg-menge,
 menge_ret1_292 LIKE mseg-menge,
 menge_unit_301 LIKE mseg-menge,
 menge_unit1_301 LIKE mseg-menge,
 menge_unit_302 LIKE mseg-menge,
 menge_unit1_302 LIKE mseg-menge,
 menge_sub LIKE mseg-menge,
 menge_sub1 LIKE mseg-menge,
 menge_oth LIKE mseg-menge,
 menge_oth1 LIKE mseg-menge,
 END OF s_calc,
 BEGIN OF s_data,
 matnr LIKE mara-matnr,
 matkl LIKE mara-matkl,
 mtart LIKE mara-mtart,
 maktx LIKE makt-maktx,
 menge_t LIKE mseg-menge,
 menge_t1 LIKE mseg-menge,
 menge_con LIKE mseg-menge,
 menge_con1 LIKE mseg-menge,
 menge_ret LIKE mseg-menge,
 menge_ret1 LIKE mseg-menge,
 menge_unit LIKE mseg-menge,
 menge_unit1 LIKE mseg-menge,
 menge_sub LIKE mseg-menge,
 menge_sub1 LIKE mseg-menge,
 menge_oth LIKE mseg-menge,
 menge_oth1 LIKE mseg-menge,
 END OF s_data.
DATA: w_mseg TYPE s_mseg,
 i_mseg TYPE s_mseg OCCURS 0,
 w_t001w TYPE s_t001w,
 i_t001w TYPE s_t001w OCCURS 0,
 w_mara TYPE s_mara,
 i_mara TYPE s_mara OCCURS 0,
 w_makt TYPE s_makt,
 i_makt TYPE s_makt OCCURS 0,
 w_calc TYPE s_calc,
 i_calc TYPE s_calc OCCURS 0,
 w_data TYPE s_data,
 i_data TYPE s_data OCCURS 0.
DATA: line_cnt TYPE i,
 v_temp TYPE p DECIMALS 2.
ALV DATA DECLERATION
DATA : IT_FIELD TYPE SLIS_T_FIELDCAT_ALV,
 WA_FIELD TYPE SLIS_FIELDCAT_ALV.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
IT_LAYOUT-ZEBRA = 'X'.
IT_LAYOUT-TOTALS_TEXT = 'Grand Total'.
IT_LAYOUT-SUBTOTALS_TEXT = 'Sub Total'.
IT_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
DATA: WA_COMMENTRY TYPE SLIS_LISTHEADER.
DATA: IT_COMMENTRY TYPE SLIS_T_LISTHEADER.
DATA: WA_COMMENTRY1 TYPE SLIS_LISTHEADER.
DATA: IT_COMMENTRY1 TYPE SLIS_T_LISTHEADER.
DATA: WA_EVENT TYPE SLIS_ALV_EVENT.
DATA: IT_EVENT TYPE SLIS_T_EVENT.
WA_EVENT-NAME = 'TOP_OF_PAGE'.
WA_EVENT-FORM = 'TOP'.
APPEND WA_EVENT TO IT_EVENT.
DATA : WA_SORT TYPE slis_sortinfo_alv,
 IT_SORT TYPE SLIS_T_SORTINFO_ALV.
CLEAR WA_SORT.
WA_SORT-SPOS = '1'.
WA_SORT-FIELDNAME = 'MATKL'.
WA_SORT-TABNAME = 'I_DATA'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-SPOS = '2'.
WA_SORT-FIELDNAME = 'MTART'.
WA_SORT-TABNAME = 'I_DATA'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
DEFINE MAC1.
WA_FIELD-TABNAME = 'I_DATA'.
WA_FIELD-FIELDNAME = &1.
WA_FIELD-COL_POS = &2.
WA_FIELD-SELTEXT_L =&3.
WA_FIELD-DO_SUM = &4.
APPEND WA_FIELD TO IT_FIELD.
END-OF-DEFINITION.
MAC1 'MATKL' '1' 'MATERIAL GROUP' 'X'.
MAC1 'MTART' '2' 'MATERIAL TYPE' 'X'.
MAC1 'MATNR' '3' 'MATERIAL NO' 'X'.
MAC1 'MAKTX' '4' 'DESCRIPTION' 'X'.
MAC1 'MENGE_CON1' '5' 'CONSUMPTION FOR PERIOD' 'X'.
MAC1 'MENGE_CON' '6' 'CONSUMPTION FOR CUMULATIVE' 'X'.
MAC1 'MENGE_RET1' '7' 'RETURN FROM DEPT. FOR PERIOD' 'X'.
MAC1 'MENGE_RET' '8' 'RETURN FROM DEPT.CUMULATIVE' 'X'.
MAC1 'MENGE_UNIT1' '9' 'INTER UNIT FOR PERIOD' 'X'.
MAC1 'MENGE_UNIT' '10' 'INTER UNIT CUMULATIVE' 'X'.
MAC1 'MENGE_SUB1' '11' 'SUB CONTRACTOR FOR PERIOD' 'X'.
MAC1 'MENGE_SUB' '12' 'SUB CONTRACTOR CUMULATIVE' 'X'.
MAC1 'MENGE_OTH1' '13' 'OTHERS FOR PERIOD' 'X'.
MAC1 'MENGE_OTH' '14' 'OTHERS CUMULATIVE' 'X'.
MAC1 'MENGE_t1' '15' 'TOTAL FOR PERIOD' 'X'.
MAC1 'MENGE_t' '16' 'TOTAL CUMULATIVE' 'X'.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
PARAMETERS: p_werks LIKE t001w-werks DEFAULT '1023' OBLIGATORY.
select-options: s_matkl FOR mara-matkl,
 s_mtart FOR mara-mtart,
 s_matnr FOR mara-matnr,
 s_budat FOR mkpf-budat OBLIGATORY.
PARAMETERS: year(4) DEFAULT '2007'.
SELECTION-SCREEN:END OF BLOCK B1.
START-OF-SELECTION.
SELECT lk~mblnr
 lk~mjahr
 lk~budat
 lp~zeile
 lp~bwart
 lp~matnr
 lp~werks
 lp~menge
 ma~mtart
 ma~matkl
 INTO CORRESPONDING FIELDs OF TABLE i_mseg
 FROM MSEG AS lp INNER JOIN MKPF AS lk
 ON lkmblnr EQ lpmblnr
 AND lkmjahr EQ lkmjahr
 INNER JOIN mara AS ma
 ON mamatnr EQ lpmatnr
 WHERE lp~werks EQ p_werks
 AND lp~matnr IN s_matnr
 AND lk~budat LE s_budat-high.
 clear line_cnt. "Count line of i_table i_mseg
 DESCRIBE TABLE i_mseg LINES line_cnt.
 IF line_cnt GT 0. "If i_mseg has records
 SELECT matnr "Collect material description
 maktx
 spras
 INTO CORRESPONDING FIELDS OF TABLE i_makt
 FROM makt
 FOR ALL ENTRIES IN i_mseg
 WHERE matnr EQ i_mseg-matnr
 AND spras EQ 'E'.
 CLEAR line_cnt.
 DESCRIBE TABLE i_makt LINES line_cnt.
 IF line_cnt GT 0.
 SORT i_makt BY MATNR ASCENDING.
 DELETE ADJACENT DUPLICATES FROM i_makt COMPARING matnr.
 ENDIF.
 SELECT werks "Collect plant name
 name1
 INTO CORRESPONDING FIELDS OF TABLE i_t001w
 FROM t001w
 FOR ALL ENTRIES IN i_mseg
 WHERE werks EQ i_mseg-werks.
 CLEAR line_cnt.
 DESCRIBE TABLE i_t001w LINES line_cnt.
 IF line_cnt GT 0.
 SORT i_t001w BY werks ASCENDING.
 DELETE ADJACENT DUPLICATES FROM i_t001w COMPARING werks.
 ENDIF.
 LOOP AT i_mseg INTO w_mseg. "Move recored into data i_tab
 w_calc-matnr = w_mseg-matnr.
 w_calc-mtart = w_mseg-mtart.
 w_calc-matkl = w_mseg-matkl.
 READ TABLE i_makt WITH KEY matnr = w_mseg-matnr INTO w_makt.
 IF sy-subrc = 0.
 w_calc-maktx = w_makt-maktx.
 ENDIF.
 IF w_mseg-bwart EQ '261' .
 w_calc-menge_con_261 = w_mseg-menge.
 IF w_mseg-budat GE s_budat-low.
 w_calc-menge_con1_261 = w_mseg-menge.
 ENDIF.
 ENDIF.
 IF w_mseg-bwart EQ '262' .
 w_calc-menge_con_262 = w_mseg-menge.
 IF w_mseg-budat GE s_budat-low.
 w_calc-menge_con1_262 = w_mseg-menge.
 ENDIF.
 ENDIF.
 IF w_mseg-bwart EQ '291' OR w_mseg-bwart EQ '201'.
 w_calc-menge_ret_291 = w_mseg-menge.
 IF w_mseg-budat GE s_budat-low.
 w_calc-menge_ret1_291 = w_mseg-menge.
 ENDIF.
 ENDIF.
 IF w_mseg-bwart EQ '292' OR w_mseg-bwart EQ '202'.
 w_calc-menge_ret_292 = w_mseg-menge.
 IF w_mseg-budat GE s_budat-low.
 w_calc-menge_ret1_292 = w_mseg-menge.
 ENDIF.
 ENDIF.
 IF w_mseg-bwart EQ '301'.
 w_calc-menge_unit_301 = w_mseg-menge.
 IF w_mseg-budat GE s_budat-low.
 w_calc-menge_unit1_301 = w_mseg-menge.
 ENDIF.
 ENDIF.
 IF w_mseg-bwart EQ '302'.
 w_calc-menge_unit_302 = w_mseg-menge.
 IF w_mseg-budat GE s_budat-low.
 w_calc-menge_unit1_302 = w_mseg-menge.
 ENDIF.
 ENDIF.
 IF w_mseg-bwart EQ '543'.
 w_calc-menge_sub = w_mseg-menge.
 IF w_mseg-budat GE s_budat-low.
 w_calc-menge_sub1 = w_mseg-menge.
 ENDIF.
 ENDIF.
 COLLECT w_calc INTO i_calc.
 ENDLOOP. "ENDLOOP of Move recored into data i_tab
 LOOP AT i_calc INTO w_calc.
 w_data-matnr = w_calc-matnr.
 w_data-mtart = w_calc-mtart.
 w_data-matkl = w_calc-matkl.
 w_data-maktx = w_calc-maktx.
 v_temp = w_calc-menge_con_261 - w_calc-menge_con_262.
 w_data-menge_con = v_temp.
 CLEAR v_temp.
 v_temp = w_calc-menge_con1_261 - w_calc-menge_con1_262.
 w_data-menge_con1 = v_temp.
 CLEAR v_temp.
 v_temp = w_calc-menge_ret_291 - w_calc-menge_ret_292.
 w_data-menge_ret = v_temp.
 CLEAR v_temp.
 v_temp = w_calc-menge_ret1_291 - w_calc-menge_ret1_292.
 w_data-menge_ret1 = v_temp.
 CLEAR v_temp.
 v_temp = w_calc-menge_unit_301 - w_calc-menge_unit_302.
 w_data-menge_unit = v_temp.
 CLEAR v_temp.
 v_temp = w_calc-menge_unit1_301 - w_calc-menge_unit1_302.
 w_data-menge_unit1 = v_temp.
 CLEAR v_temp.
 w_data-menge_sub = w_calc-menge_sub.
 w_data-menge_sub1 = w_calc-menge_sub.
 v_temp = w_data-menge_con + w_data-menge_ret + w_data-menge_unit + w_data-menge_sub.
 w_data-menge_t = v_temp.
 CLEAR v_temp.
 v_temp = w_data-menge_con1 + w_data-menge_ret1 + w_data-menge_unit1 + w_data-menge_sub1.
 w_data-menge_t1 = v_temp.
 CLEAR v_temp.
 APPEND w_data TO i_data.
 ENDLOOP.
 ENDIF. "ENDIf i_mseg has records
Display_ALV
END-OF-SELECTION.
DATA : DATE(85),
 DATE_LOW(10),
 DATE_HIGH(10),
 MSK TYPE STRING,
 DATE1(10),
 date2(10).
WA_COMMENTRY-TYP = 'H'.
WA_COMMENTRY-INFO = 'Material Consumption Report'.
APPEND WA_COMMENTRY TO IT_COMMENTRY.
CLEAR WA_COMMENTRY.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/' S_BUDAT-LOW+0(4) INTO DATE1.
CONCATENATE S_BUDAT-high6(2) '/' S_BUDAT-high4(2) '/' S_BUDAT-high+0(4) INTO DATE2.
CONCATENATE 'Material Consumption Report :' DATE1 'To' date2 INTO DATE SEPARATED BY SPACE.
WA_COMMENTRY-TYP = 'S'.
WA_COMMENTRY-INFO = DATE.
APPEND WA_COMMENTRY TO IT_COMMENTRY.
CLEAR WA_COMMENTRY.
*SORT I_DATA BY MTART MATKL .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
 I_BACKGROUND_ID = 'ALV_BACKGROUNG'
I_GRID_TITLE = 'STOCK LEDGER SUMMARY'
 IS_LAYOUT = IT_LAYOUT
 IT_FIELDCAT = IT_FIELD
IT_SORT = IT_SORT
I_SAVE = 'X'
 IT_EVENTS = IT_EVENT
TABLES
 T_OUTTAB = I_DATA.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = IT_COMMENTRY
I_LOGO = 'INOXLOGO'
I_END_OF_LIST_GRID =
I_ALV_FORM.
REFRESH IT_COMMENTRY.
ENDFORM. " TOP-OF-PAGE

It is giving me error on sort statement
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_BACKGROUND_ID = 'ALV_BACKGROUNG'
I_GRID_TITLE = 'STOCK LEDGER SUMMARY'
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELD
IT_SORT = IT_SORT <<<<<<<<<<<<<<<<<<<<<<<<<<<
I_SAVE = 'X'
IT_EVENTS = IT_EVENT
TABLES
T_OUTTAB = I_DATA.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Error in Material Master download

Dear all,
We are in SRM 4.0 with support pack level 11. We have revalidated our setting as per sap note 720819 as well. While downloading the material master from ECC system we are facing this error in our inbound queue.
"Function module "CRM_DOWNLOAD_RCV_EXIT" not found"
Kindly suggest the solution.
Regards
Dinesh Singh

Hi,
See these threads for more pointer/info:
Re: Function module "CRM_DOWNLOAD_RCV_EXIT" not found error
Re: ERROR MESSAGE IN SQM2
Also see whether all the steps have been performed as mentioned in this weblog:
How to replicate material master from R/3 to SRM
BR,
Disha.

Error in Material Master

I am getting an error while viewing in mm03 Sales:Sales Organixation Data The error is "No plant-specific data exists"
Please suggest what could be possible error in maintaining the material master and necessary corrective steps.
Thanks
Praveen

The error is self explainatory "No plant-specific data exists"
Go to mm01 & maintain the date for the organizational levels you are tyying to view:
Plant
Sales Org.
Distr. Chann

WF - Error in Material Master extension

Hello friends
I have some changes to the coding(in ABAP not BOR) related to a workflow of Material Master creation and extension, there is a Z table from where it picks the profit centre to create and extend materials.
When Profit centre is there for a plant, the workflow executes without error but when profit centre is not there then workflow is not executed, it gives the following error.
ROLLBACK WORK executed (SWP_CALLBACK_WI_DONE item 8)
ROLLBACK WORK executed (SWP_CONTINUE_WITH_NEXT_NODES item 1)
stating that it could not find agents.
I have checked in MM01 Profit centre is not a obligatory field and neither is there any check in coding for the same.
I have no idea what to do, please guide.
Thanks
Bhavna

Dear Bhavna,
Please check if you are validating Profit Center before calling agent determination. It appears that Agent Determination is linked with Profit Center.
Hope this is helpful.
Regards,
Naveen.

EAN error in material master

Hi Everyone,
We have an issue with International Article Number (EAN/UPC) being enetered in the material master.
When the user enters particular EAN he gets an error which says "The EAN # may not be assigned externally"
Message no. WE216.
I have checked the config & it is ok. The EAN Number entered is well within the number range assigned to the particular EAN category.
I also did a config check as per SAP note 879460 & corrected it in test sever, but still the error persists.
Any suggestion on what may be wrong.
Thanks.
Akshay

unfortunatly you did not post the EAN, as the number itself could explain some errors.
Read OSS Note 545520 - FAQ: International Article Number (EAN/UPC)
but the error itself explains already that you enter something manual, were SAP expects no manual entry.
is your number range an external or internal number range?
Edited by: Jürgen L. on Jan 11, 2011 11:16 PM

Add a button in MM03 (Material master) transaction.

Hi all,
I would like to add a button in mm03 (material master), just above the tabs. After some research, after research on this forum and on marketplace I didn't found anything interesting.
Anyone has an idea?
Thanks for your help!
Greetings from belgium.

Thanks for your answer !
It's working but I have to do it for every tab.
I am looking for a button that would appear above the tab, so it would be available for every tab. Next to the other buttons for example.
Once again thanks for your help.
Olivier D.

Short Dump Error while loading master data.

Hello All,
I am trying to load data from PSA to Info Object (0Material_Attr) via DTP, I am getting error and itu2019s giving the short dump.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE.
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE".
In Job overview, job is getting cancelled, with error message
"The object name is not allowed to be empty".
ABAP/4 processor: UNCAUGHT_EXCEPTION.
We have done the following steps, even then error persist.
Transaction RSRV > All Elementary Tests > Master Data > Compare Number Range and Maximum SID for the characteristic 0REQUID.
If the system reports an error here, correct the error using the "Correct Error" function.
Kindly suggest.
Thanks in Advance .

Error analysis from ST22
An exception occurred which is explained in The exception, which is assigned to class ' and therefore caused a runtime error.
The reason for the exception is: No text available for this exception
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"

Error Loading Material Master Data

Hi All, When I try to load ZMATERIAL in BW development. I am getting the below error. I am on BI 7.0. seems like bad data, but how to fix it?? any thoughts??
in the details TAB of the monitor, I get a red error message under
'Transfer (IDocs and TRFC): Errors occurred '
>>Processing (data packet): Errors occurred
>>>Data Package 5 ( 10417 Records ) : Errors occurred
>>>>Update ( 0 new / 0 changed ) : Errors occurred
>>>>>Data records for package 5 selected in PSA - 1 error(s)
>>>>>>ZMATERIAL : Data record 10416 ('000001 '): Version '000001 ' is not valid
>>>Processing end : Errors occurred
>>>>>Error 4 in the update

Hi PK,
i can give you some indications:
This message indicate that in R/3 you have an incorrect value and the data record indicate the key with The important information.
When controlling the InfoObject and the transfer rule you can extract the info that you need to correct the data i think in your case you have to check the length and the character type between your infoobject in BW and the field table in R/3.
transaction RSA1==> Infosource==> find your Infosource==> double click on your Infosource that take you to transfer rules==> and here you can check the mapping between your infoobject (ZMATERIAL) and the original field in R/3 that you have to correct.
in the same screen under Transfer_structure/transfer_rules you can find the name of the datasource and in R/3 transaction RSO2 you can find the original table that contain the field to correct.
when you individualize the table and the field communicate this Info to the persons who works on R/3 and after they correct the data reload again in BW.
i hope that this Info help you
Bilal

LSMW error in material master classification uploading

Hi,
I'm uploading classification for materials by LSMW with a direct input
but at the end of the uploading process I can read the following:
Error Changing Classification Data
Other
( CLAP_DDB_UPDATE_CLASSIFICATION: exception 3 )
The Following File Was Created with the Error Records:
RCCLBI03.ERROR
How Can I find a list of all the exceptions ?
Thanks!
Best Regards

CLAP_DDB_UPDATE_CLASSIFICATION is a function module. which is called from the batch input program RCCLBI03 that you have in your LSMW step1.
so you can go to SE37, enter CLAP_DDB_UPDATE_CLASSIFICATION and either read the docu or directly display the FM, therein is a tab for exceptions, just count starting from top
the third is classtype not defined

Material Master - Error M3 826 Maintenance status of field ... to screen

Hi Experts of the Material Master,
I am getting the error M3 826 "Maintenance status of field MARA-BEHVO does not correspond to status of screen K" when all screens are selected in the Create Material Master transaction.
Here is my situation: I have added the fields MARA-BEHVO and MARA-TEMPB both of status L (Storage) to a screen called "Phys. Characteristics", which has status K (Basic data).
This produces the error message above in standard SAP. I didn't want to change the customizing of the screen to allow L, because this screen is also used by other material types.
I had to copy the screen MGD1 2701 (Phys. Characteristics) to my custom program for Material Master screens anyhow, as the number of fields and their descriptions had to be adjusted.
The program was created using the activity "Create Program for User Subscreens" in SPRO.
in the coding of ZMGD1 screen 2701 I have added this code behind the standard module FELDAUSWAHL to manipulate the standard logic that would blend out L fields on a K screen.
LOOP AT SCREEN.
*   Material Type
    IF mara-mtart = 'ZPNT'.
*     Screen-Names of the 3 fields
      IF screen-name = 'MARA-TEMPB' OR
         screen-name = 'MARA-BEHVO'.
        screen-active      = 1.
        screen-invisible   = 0.
        screen-output      = 1.
*       Change or Create transaction
        IF sy-tcode = 'JP27' OR sy-tcode = 'JP28'.
          screen-input       = 1.
          screen-required    = 1.
        ENDIF. "transaction code JP27 or JP28
        MODIFY SCREEN.
      ENDIF. "screen-name
    ENDIF. "Material Type ZPNT
ENDLOOP.
It all works fine when only a number of screens (but including the modified) screens are selected for creation.
But it fails with the message above on the modified screen when all screens are selected.
Any ideas?
Ralf

from the message, it appears that ZZKUNNR is a custom field attached to your MARA table. So, it is your System specific. I don't see ZZKUNNR available in MARA. If you look at the transaction code OMT3B (configuration for material master data screens), you can find K - Basic Data Screen in Maintenance Status field.
You may look in this area to fix your issue. Because yours is a custom field, its tough to analyse further.
Reward points, if it helps!
Regards

Dump Error In Material Master Transaction

Similar Messages

Maybe you are looking for