Duplicate database from active database in 11g?
Does anyone know if it's possible to clone a database from stby by issuing RMAN duplicate database FROM ACTIVE DATABASE command in 11g?
I know it's possible from primary to create stby.
Thanks in advance
You may have run into the same problem like I did recently:
The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
ORA-12528: TNS listener BLOCKED - trying to duplicate database
Also for further problems:
RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628
Similar Messages
-
Issue in configuring Standby Database from Active database in 11g by RMAN
POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PMHello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg -
Rman clone duplicate database from active database
Hi All,
I read document saying that rman can duplicate database from active database (prod) to a remote server, so long as you configure listener and tnsname.
I am working toward it.
I met a problem, which is when i bring up auxiliary database in nomount mode, the listener service of that auxiliary database is in BLOCKED status, and throw out ora-12528 error when I rman auxiliary sys/pass@clonedb. Isn't nomount mode the mode which auxiliary db is supposed to be in?
(ora-12528: TNS:listener: all appropriate instances are blocking new connections)
Thanks,
milicYou may have run into the same problem like I did recently:
The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
ORA-12528: TNS listener BLOCKED - trying to duplicate database
Also for further problems:
RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628 -
Problem with duplicate target database from active database
Hi all,
i try duplicate database from active database
- I have von target and auxiliary the same SYS Password
- tnsping wogks in both directions fine
- sqlplus to target and auxilairy works from both server
- Metalink Solution 1056174.1 not help
but in the Rman log become this error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on a1 channel at
ORA-17629: Cannot connect to the remote database server
ORA-17629: Cannot connect to the remote database server
i do do :
rman target sys/PASSWD@TARGET auxiliary sys/PASSWD
run
ALLOCATE CHANNEL a1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL d1 DEVICE TYPE DISK;
duplicate target database to XXXXX
from active database
DB_FILE_NAME_CONVERT ('/XXXX/XXXX/XXXXXX','/XXXXX/XXXXXX/XXXXX/')
spfile
parameter_value_convert '/XXXX/','/XXXXX/'
set log_file_name_convert '/XXXXX/','/XXXXX/'
any Idea ?
Best RegardsDon't know if this will help, but I use the connect string below to connect, then run the command below. This is, of course, after the rman backup from the prod system has been copied to the flash_recovery_area of the aux database. All file paths are the same between the two systems. Works like a charm most nights. The local tnsnames file on the rman catalog server has working entries for @SDPROD, @rman and @SDSTB.
[Connect String]
rman TARGET SYS/xxxxx@SDPROD CATALOG rman/xxxxx@rman AUXILIARY SYS/xxxxx@SDSTB cmdfile D:\cladmin\Scripts\DuplicateSD.rcv LOG=D:\cladmin\Logs\DuplicateSD.f
[Command file block]
RUN{
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE TO DATABASENAME
NOFILENAMECHECK;
Edited by: user522620 on Jun 27, 2011 6:36 PM -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
Failing by duplicate database from active database
Hallo,
i'm working with 11g on one server and want to duplicate a database in active mode.
what i do:
i create a new password-file using orapwd - orapwNEW
i create a new entry for ORANEW in tnsnames.ora and listener.ora
then i execute rman TARGET sys/xxx@old AUXILIARY sys/xxx@NEW
then rman> DUPLICATE TARGET DATABASE TO NEW FROM ACTIVE DATABASE SPFILE NOFILENAMECHECK;
then i've got the failure RMAN-06403, RMAN-04006, ORA-01034
whats the problem?
thanks in advance.i think it is the problem that rman can't connect to the auxiliary db.
but what i must do?
in the documentation i found that:
The PASSWORD FILE option specifies that RMAN should copy the password file to the destination host. RMAN automatically copies the server parameter file to the destination host, starts the auxiliary instance with the server parameter file, copies all necessary database files and archived redo logs over the network to the destination host, and recovers the database. Finally, RMAN opens the database with the RESETLOGS option to create the online redo log. -
Creating a duplicated database from active database
I'm having problem trying to duplicate a database from a target database (PROD) to the auxiliary one (AUX).
This is what I've configured:
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = PROD)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
(SID_NAME = PROD)
(SID_DESC =
(GLOBAL_DBNAME = AUX)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
(SID_NAME = AUX)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracletnsnames.ora
AUX =
(DESCRIPTION =
(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = AUX)
PROD =
(DESCRIPTION =
(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = PROD)
)/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
db_name='AUX'
cp /u01/app/oracle/product/11.2.0/db_1/dbs/orapwPROD /u01/app/oracle/product/11.2.0/db_1/dbs/orapwAUX- Started PROD database (open and in archive log mode)
- Started AUX database (in nomount mode and usinf pfile='/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora')
But when I issue the following command I get connected to auxiliary database (not started) :
rman target sys/oracle@PROD auxiliary sys/oracle@AUX
connected to target database: PROD (DBID=196032563)
connected to auxiliary database (not started)And executing the duplicate command it returns:
RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
Starting Duplicate Db at 2010-09-28:13:36:50
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/28/2010 13:36:50
RMAN-06403: could not obtain a fully authorized session
RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directorylsnrctl stopped and restarted several times. This is the output of lsnrctl status command:
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 28-SEP-2010 13:45:14
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=my_ip)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 28-SEP-2010 12:44:50
Uptime 0 days 0 hr. 1 min. 22 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/my_ip/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=my_ip)(PORT=1521)))
Services Summary...
Service "PROD" has 1 instance(s).
Instance "PROD", status READY, has 1 handler(s) for this service...
Service "PRODXDB" has 1 instance(s).
Instance "PROD", status READY, has 1 handler(s) for this service...
Service "AUX" has 2 instance(s).
Instance "AUX", status UNKNOWN, has 1 handler(s) for this service...
Instance "AUX", status BLOCKED, has 1 handler(s) for this service...
The command completed successfullyI have already created a duplicated database from a backup of the target one and the configuration was quite the same: the differences are that using active database duplication I needed to use orapw files (and they need to have the same password) and that I needed to connect using Oracle Net service name to connect to the auxiliary instance.. otherwise I got:
export ORACLE_SID=AUX
rman target sys/oracle@PROD auxiliary sys/oracle
connected to target database: PROD (DBID=196032563)
connected to auxiliary database: AUX (not mounted)
RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
Starting Duplicate Db at 2010-09-28:12:27:21
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/28/2010 12:27:21
RMAN-06217: not connected to auxiliary database with a net service nameWhere am I wrong?Thanks for your support. My instance was and is still in nomount mode. But I'm not able to connect this instance as auxiliary and in the right expected mode:
connected to auxiliary database: AUX (not mounted)
[oracle@my_ip oracle]$ env|grep SID
ORACLE_SID=AUX
[oracle@my_ip oracle]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Sep 29 10:28:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
idle> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
idle> startup nomount pfile=/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
ORACLE instance started.
Total System Global Area 217157632 bytes
Fixed Size 2211928 bytes
Variable Size 159387560 bytes
Database Buffers 50331648 bytes
Redo Buffers 5226496 bytes -
RMAN duplicate target database from active database - performance problem
Hello. I’m running into a major performance problem when trying to duplicate a database from a target located inside our firewall to an auxiliary located outside our firewall. Both target and auxiliary are located in the same equipment room just on different subnets. Previously I had the auxiliary located on the same subnet as the target behind the firewall and duplicating a 4.5T database took 12 hours. Now with the auxiliary moved outside the firewall attempting to duplicate the same 4.5T database is estimated to exceed 35 hours. The target is a RAC instance using ASM and so is the auxiliary. Ping, tnsping, traceroutes to and from target and auxiliary all indicate no problem or latency. Any ideas on things to consider while hunting for this elusive performance decrease?
Thanks in advance.It would obviously appear network related. Have you captured any network/firewall metrics? Are all components set to full duplex? Would it be possible to take the firewall down temporarily and then test the throughput? Do you encounter any latency if you were to copy a large file across the subnets?
You may want to check V$RMAN_BACKUP_JOB_DETAILS, V$BACKUP_SYNC_IO or V$BACKUP_ASYNC_IO when the backup is running. -
Duplicate target from active database session terminate after 500gb data cp
i have 1 tb db. for example i execute the duplicate command from activate standby database.after 500gb datafile copy the session terminate due to some bottle neck ( network) .is it possible to resume the job again means job again starded from the previous stage .
thanks913779 wrote:
i have 1 tb db. for example i execute the duplicate command from activate standby database.after 500gb datafile copy the session terminate due to some bottle neck ( network) .is it possible to resume the job again means job again starded from the previous stage .
thanksCheck the documentation
http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmdupdb.htm#BGBEFJHH -
Duplicate database for standby from active database
I'm running 11.1.0.7. Has anybody ever duplicated a standby database from active database and the active database being a physical standby open for read only with active dataguard instead of a primary dataguard database?
The key here is location. The primary is located at a remote site where network bandwidth is inadequate for fast copy of database. The active standby database is at same site where I would like to build the new physical standby.I don't think you can, because "You cannot CONNECT RMAN to the standby database and then use DUPLICATE ... FOR STANDBY to create an additional standby database " and you can't fake it out by getting a controlfile from the primary because the controlfile has to match up with the backup and can't be a standby.
But I'm wondering if you could failover to the standby, duplicate, fail back, then... oh well, that will never work either, incarnation problem.
Snapshot standby? Could one back it up, then flashback restored new standby, change dbid? I would guess there would be an SCN problem, but don't know enough about it. -
Rman duplicate from active database slow
Hi,
I am doing a duplicate database from active database, it seems to either slow or hanging. Can someone suggest any tips or pointers to debug this issue?
Source: 11gR2 3-node RAC (only one instance running) on Solaris 10, about 25TB
Target: 1-node, 11gR2 on Solaris 10
Thanks!source:
SID SERIAL# CONTEXT SOFAR TOTALWORK %_complete
1555 7013 1 43730494 142245833 30.74
2332 8079 1 44307262 102713507 43.14
2235 10987 1 47052222 105912610 44.43
2622 5033 1 48406910 86329752 56.07
2040 49651 1 49519038 111411200 44.45
1846 20307 1 43488574 138674977 31.36
1459 26683 1 44936702 272716852 16.48
7 rows selected.
Target: no rows -
How reliable is DUPLICATE .. FROM ACTIVE DATABASE ?
Version : 11.2.0.3
Platform : OEL 6
DUPLICATE .. FOR STANDBY FROM ACTIVE DATABASE doesn't involve taking any RMAN Backup files. Right? Just transferring data across the network.
Given that I have a good network throughput, how reliable it is to use this feature to create a standby from a 2 TeraByte Primary ? The standby DB will be created in our Data Center located 50KM away from the Primary Site.Kavanagh wrote:
Version : 11.2.0.3
Platform : OEL 6
DUPLICATE .. FOR STANDBY FROM ACTIVE DATABASE doesn't involve taking any RMAN Backup files. Right? Just transferring data across the network.
Given that I have a good network throughput, how reliable it is to use this feature to create a standby from a 2 TeraByte Primary ? The standby DB will be created in our Data Center located 50KM away from the Primary Site.2TB is not a small database to perform Duplicate from ACTIVE Database, Yes as you said there is no more need of backups from 11g if you use ACTIVE database.
Do not consider of the distance, Consider the bandwidth speed between two sites and how fast data can transfer and how stable it is.
You can test the network speed by transferring any one of the big file using SCP also, On top of that you can estimate how much time it can complete and ensure there is no network glitches/interruptions to avoid failure duplicate. -
Error during "duplicate target ... from active database"
hi:
RMAN duplicate failure after the auxiliary instance mounted,we want to create a physical standby database .
Platform: solaris10 spark 64bit
Version: 11.2.0.1.5 (both primary and standby)
thank you..
RMAN log:
rman target sys/password@his_primary auxiliary sys/password@his_standby_tt
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Aug 30 15:40:06 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: HIS (DBID=3271178181)
connected to auxiliary database: HIS (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 30-AUG-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=2833 device type=DISK
allocated channel: ORA_AUX_DISK_2
channel ORA_AUX_DISK_2: SID=3399 device type=DISK
allocated channel: ORA_AUX_DISK_3
channel ORA_AUX_DISK_3: SID=3966 device type=DISK
allocated channel: ORA_AUX_DISK_4
channel ORA_AUX_DISK_4: SID=3 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/oracle/product/11.2.0/db_1/dbs/orapwhis' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/orapwhis' ;
executing Memory Script
Starting backup at 30-AUG-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1570 device type=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: SID=1708 device type=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: SID=1851 device type=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: SID=1995 device type=DISK
Finished backup at 30-AUG-12
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/app/oradata/his/control01.ctl';
restore clone controlfile to '/u01/app/oradata/his/control02.ctl' from
'/u01/app/oradata/his/control01.ctl';
restore clone controlfile to '/u01/app/oradata/his/control03.ctl' from
'/u01/app/oradata/his/control01.ctl';
executing Memory Script
Starting backup at 30-AUG-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
channel ORA_DISK_1: starting datafile copy
copying standby control file
output file name=/export/home/oracle/snap.f tag=TAG20120830T154059 RECID=9 STAMP=792690060
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 30-AUG-12
Starting restore at 30-AUG-12
using channel ORA_AUX_DISK_1
using channel ORA_AUX_DISK_2
using channel ORA_AUX_DISK_3
using channel ORA_AUX_DISK_4
channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_1: copied control file copy
Finished restore at 30-AUG-12
Starting restore at 30-AUG-12
using channel ORA_AUX_DISK_1
using channel ORA_AUX_DISK_2
using channel ORA_AUX_DISK_3
using channel ORA_AUX_DISK_4
channel ORA_AUX_DISK_2: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_3: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_4: skipped, AUTOBACKUP already found
channel ORA_AUX_DISK_1: copied control file copy
Finished restore at 30-AUG-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"/u01/app/oradata/his/temp.266.750421813";
set newname for tempfile 2 to
"/u01/app/oradata/his/ts_temp_patrol.298.750425277";
set newname for tempfile 3 to
"/u01/app/oradata/his/ts_his_temp.296.750427905";
set newname for tempfile 4 to
"/u01/app/oradata/his/ts_tjjk_temp.282.750427917";
set newname for tempfile 5 to
"/u01/app/oradata/his/ts_temp_shuhao.595.782919539";
switch clone tempfile all;
set newname for datafile 1 to
"/u01/app/oradata/his/system.256.750421615";
set newname for datafile 2 to
"/u01/app/oradata/his/sysaux.257.750421615";
set newname for datafile 3 to
"/u01/app/oradata/his/undotbs1.258.750421615";
set newname for datafile 4 to
"/u01/app/oradata/his/users.259.750421615";
set newname for datafile 5 to
"/u01/app/oradata/his/ts_his.280.750425023";
set newname for datafile 6 to
"/u01/app/oradata/his/ts_his_index.281.750425025";
set newname for datafile 7 to
"/u01/app/oradata/his/system.569.754307341";
set newname for datafile 8 to
"/u01/app/oradata/his/ts_bj.283.750425027";
set newname for datafile 9 to
"/u01/app/oradata/his/ts_gt.284.750425027";
set newname for datafile 10 to
"/u01/app/oradata/his/ts_fx.285.750425027";
set newname for datafile 11 to
"/u01/app/oradata/his/ts_uap.286.750425029";
set newname for datafile 12 to
"/u01/app/oradata/his/ts_gkxj.287.750425029";
set newname for datafile 13 to
"/u01/app/oradata/his/ts_xejj.288.750425031";
set newname for datafile 14 to
"/u01/app/oradata/his/ts_zdzyrz.289.750425031";
set newname for datafile 15 to
"/u01/app/oradata/his/ts_zj.290.750425033";
set newname for datafile 16 to
"/u01/app/oradata/his/ts_jgcp.291.750425033";
set newname for datafile 17 to
"/u01/app/oradata/his/ts_gtbj.292.750425033";
set newname for datafile 18 to
"/u01/app/oradata/his/ts_base.293.750425035";
set newname for datafile 19 to
"/u01/app/oradata/his/ts_exdata.294.750425035";
set newname for datafile 20 to
"/u01/app/oradata/his/ts_tjjk.295.750425037";
set newname for datafile 21 to
"/u01/app/oradata/his/ts_shuhao.594.782919537";
set newname for datafile 22 to
"/u01/app/oradata/his/ts_patrol.297.750425037";
backup as copy reuse
datafile 1 auxiliary format
"/u01/app/oradata/his/system.256.750421615" datafile
2 auxiliary format
"/u01/app/oradata/his/sysaux.257.750421615" datafile
3 auxiliary format
"/u01/app/oradata/his/undotbs1.258.750421615" datafile
4 auxiliary format
"/u01/app/oradata/his/users.259.750421615" datafile
5 auxiliary format
"/u01/app/oradata/his/ts_his.280.750425023" datafile
6 auxiliary format
"/u01/app/oradata/his/ts_his_index.281.750425025" datafile
7 auxiliary format
"/u01/app/oradata/his/system.569.754307341" datafile
8 auxiliary format
"/u01/app/oradata/his/ts_bj.283.750425027" datafile
9 auxiliary format
"/u01/app/oradata/his/ts_gt.284.750425027" datafile
10 auxiliary format
"/u01/app/oradata/his/ts_fx.285.750425027" datafile
11 auxiliary format
"/u01/app/oradata/his/ts_uap.286.750425029" datafile
12 auxiliary format
"/u01/app/oradata/his/ts_gkxj.287.750425029" datafile
13 auxiliary format
"/u01/app/oradata/his/ts_xejj.288.750425031" datafile
14 auxiliary format
"/u01/app/oradata/his/ts_zdzyrz.289.750425031" datafile
15 auxiliary format
"/u01/app/oradata/his/ts_zj.290.750425033" datafile
16 auxiliary format
"/u01/app/oradata/his/ts_jgcp.291.750425033" datafile
17 auxiliary format
"/u01/app/oradata/his/ts_gtbj.292.750425033" datafile
18 auxiliary format
"/u01/app/oradata/his/ts_base.293.750425035" datafile
19 auxiliary format
"/u01/app/oradata/his/ts_exdata.294.750425035" datafile
20 auxiliary format
"/u01/app/oradata/his/ts_tjjk.295.750425037" datafile
21 auxiliary format
"/u01/app/oradata/his/ts_shuhao.594.782919537" datafile
22 auxiliary format
"/u01/app/oradata/his/ts_patrol.297.750425037" ;
sql 'alter system archive log current';
executing Memory Script
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /u01/app/oradata/his/temp.266.750421813 in control file
renamed tempfile 2 to /u01/app/oradata/his/ts_temp_patrol.298.750425277 in control file
renamed tempfile 3 to /u01/app/oradata/his/ts_his_temp.296.750427905 in control file
renamed tempfile 4 to /u01/app/oradata/his/ts_tjjk_temp.282.750427917 in control file
renamed tempfile 5 to /u01/app/oradata/his/ts_temp_shuhao.595.782919539 in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting backup at 30-AUG-12
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
channel ORA_DISK_1: starting datafile copy
input datafile file number=00008 name=+DATA/his/datafile/ts_bj.283.750425027
channel ORA_DISK_2: starting datafile copy
input datafile file number=00009 name=+DATA/his/datafile/ts_gt.284.750425027
channel ORA_DISK_3: starting datafile copy
input datafile file number=00005 name=+DATA/his/datafile/ts_his.280.750425023
channel ORA_DISK_4: starting datafile copy
input datafile file number=00015 name=+DATA/his/datafile/ts_zj.290.750425033
RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_3 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_4 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
channel ORA_DISK_1 disabled, job failed on it will be run on another channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/30/2012 17:49:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_4 channel at 08/30/2012 16:42:19
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/30/2012 16:51:58
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/30/2012 17:49:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN-03009: failure of backup command on ORA_DISK_3 channel at 08/30/2012 16:10:23
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
RMAN>
Primary database alert log:
Thu Aug 30 15:41:00 2012
Clearing standby activation ID 3277937203 (0xc3615a33)
The primary database controlfile was created using the
'MAXLOGFILES 16' clause.
There is space for up to 11 standby redo logfiles
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl5.f' SIZE 536870912;
ALTER DATABASE ADD STANDBY LOGFILE 'srl6.f' SIZE 536870912;
WARNING: OMF is enabled on this database. Creating a physical
standby controlfile, when OMF is enabled on the primary
database, requires manual RMAN intervention to resolve OMF
datafile pathnames.
NOTE: Please refer to the RMAN documentation for procedures
describing how to manually resolve OMF datafile pathnames.
Thu Aug 30 16:10:13 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25860.trc (incident=72361):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72361/his_ora_25860_i72361.trc
Thu Aug 30 16:10:20 2012
Trace dumping is performing id=[cdmp_20120830161020]
Thu Aug 30 16:10:22 2012
Sweep [inc][72361]: completed
Sweep [inc2][72361]: completed
Thu Aug 30 16:40:32 2012
Thread 1 cannot allocate new log, sequence 3031
Private strand flush not complete
Current log# 4 seq# 3030 mem# 0: +DATA/his_primary/onlinelog/group_4.579.759345057
Current log# 4 seq# 3030 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_4_74nf15rq_.log
Thread 1 advanced to log sequence 3031 (LGWR switch)
Current log# 5 seq# 3031 mem# 0: +DATA/his_primary/onlinelog/group_5.261.759345075
Current log# 5 seq# 3031 mem# 1: /backup/odsdb/HIS_PRIMARY/onlinelog/o1_mf_5_74nf1q2g_.log
Thu Aug 30 16:40:37 2012
LNS: Standby redo logfile selected for thread 1 sequence 3031 for destination LOG_ARCHIVE_DEST_2
Thu Aug 30 16:40:39 2012
Archived Log entry 5829 added for thread 1 sequence 3030 ID 0xffffffffc3615a33 dest 1:
Thu Aug 30 16:42:15 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25862.trc (incident=72369):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72369/his_ora_25862_i72369.trc
Thu Aug 30 16:42:17 2012
Trace dumping is performing id=[cdmp_20120830164217]
Thu Aug 30 16:42:17 2012
Sweep [inc][72369]: completed
Sweep [inc2][72369]: completed
Thu Aug 30 16:51:53 2012
Errors in file /u01/oracle/diag/rdbms/his_primary/his/trace/his_ora_25858.trc (incident=72353):
ORA-00600: internal error code, arguments: [1868], [0xFFFFFFFF7BBD4988], [], [], [], [], [], [], [], [], [], []
Incident details in: /u01/oracle/diag/rdbms/his_primary/his/incident/incdir_72353/his_ora_25858_i72353.trc
Thu Aug 30 16:51:55 2012
Sweep [inc][72353]: completed
Sweep [inc2][72353]: completed
Thu Aug 30 16:51:55 2012
Trace dumping is performing id=[cdmp_20120830165155]
Edited by: 960892 on 2012-9-24 上午2:22hi:
this is the initialization parameter file for auxiliary instance:
*.audit_file_dest='/u01/oracle/admin/his/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oradata/his/control01.ctl','/u01/app/oradata/his/control02.ctl','/u01/app/oradata/his/control03.ctl'
*.db_block_size=8192
*.db_domain='abc.com.cn'
*.db_file_name_convert='+DATA/his/datafile/','/u01/app/oradata/his/','+DATA/his/tempfile/','/u01/app/oradata/his/','+DATA/his_primary/datafile/','/u01/app/oradata/his/','+DATA/his_primary/tempfile/','/u01/app/oradata/his/'
*.db_files=1000
*.db_name='his'
*.db_recovery_file_dest='/backup/oracle'
*.db_recovery_file_dest_size=1073741824000
*.db_unique_name='his_standby_tt'
*.diagnostic_dest='/u01/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=hisXDB)'
*.fal_client='his_standby_tt'
*.fal_server='his_primary'
*.log_archive_config='DG_CONFIG=(his_primary,his_standby_tt)'
*.log_archive_dest_1='LOCATION=/backup/oracle/HIS_STANDBY_TT/archivelog VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=his_standby_tt'
*.log_archive_dest_2='SERVICE=his_primary LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=his_primary'
*.log_archive_dest_state_1='enable'
*.log_archive_dest_state_2='enable'
*.log_file_name_convert='+DATA/his_primary/onlinelog/','/u01/app/oradata/his/','/backup/odsdb/HIS_PRIMARY/onlinelog/','/u01/app/oradata/his/'
*.memory_target=2181038080
*.nls_language='SIMPLIFIED CHINESE'
*.nls_territory='CHINA'
*.open_cursors=300
*.processes=3000
*.remote_login_passwordfile='EXCLUSIVE'
*.service_names='his.abc.com.cn,his_standby_tt.abc.com.cn'
*.sessions=3305
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.event='10298 trace name context forever, level 32' -
RMAN 11gR2 DUPLICATE TARGET FOR STANDBY FROM ACTIVE DATABASE - Issue -HELP
First question.
Can primary and standby database have the same SID name?
As I recall it is yes.
I believe they must have different GLOBAL or DB_UNIQUE_NAME?
Anyway, RMAN I believe is telling me it is having problems copying control file on first and dies.
Permissions Issue on STANDBY machine?
RMAN> connect target backup_admin/backup_admin
connected to target database: LABDG (DBID=1973403623)
RMAN> connect auxiliary sys/oracle@STANDBY;
connected to auxiliary database: LABDG (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE;
Starting Duplicate Db at 18-JUL-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=10 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' auxiliar
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' ;
executing Memory Script
Starting backup at 18-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=151 device type=DISK
Finished backup at 18-JUL-11
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/oradat
restore clone controlfile to '/u01/app/oracle/flash_recovery_area/LABDG/cont
'/u01/oradata/LABDG/control01.ctl';
executing Memory Script
Starting backup at 18-JUL-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying standby control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/18/2011 11:20:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/18/2011 11:20:
ORA-17628: Oracle error 19505 returned by remote Oracle serverHi,
Permissions Issue on STANDBY machine?First problem I see is the sysdba password must be the same on both sides (target and auxiliary dbs).
From the documentation.
The source database and auxiliary instances must use the same SYSDBA password, which means that both instances must have password files. You can
create the password file with a single password so you can start the auxiliary instance and enable the source database to connect to it.Check all prereqs for the standby db duplicate here.
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Rgds,
Tycho -
Issue with RMAN DUPLICATE FROM ACTIVE DATABASE....
Hi All,
Not sure if I should continue from a closed thread, so apologies, opening a new one..
I ran the following command:
DUPLICATE TARGET DATABASE TO ' AUX1"
from ACTIVE DATABASE
NOFILENAMECHECK:
So the copy went in fine...so I am confiused now....why when doing a recover, i get the below errors from output:
archived log for thread 1 with sequence 68346 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68346_ARCH_D-RBS_ID-295728924
5_S-68346_T-1_A-780292253_C1OQVOSU_.ARC
archived log for thread 1 with sequence 68347 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68347_ARCH_D-RBS_ID-295728924
5_S-68347_T-1_A-780292253_C3OQVOU1_.ARC
archived log for thread 1 with sequence 68348 is already on disk as file H:\ORAC
LE_ARCHIVE_LOGS\RBS1\ARCHIVELOG\2013_12_08\O1_MF_1_68348_ARCH_D-RBS_ID-295728924
5_S-68348_T-1_A-780292253_C4OQVOU6_.ARC
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/08/2013 07:36:04
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 64713 and start
ing SCN of 12728145997 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64712 and start
ing SCN of 12728133322 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64711 and start
ing SCN of 12728121403 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64709 and start
ing SCN of 12727730726 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64708 and start
ing SCN of 12727717143 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64707 and start
ing SCN of 12727701799 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64704 and start
ing SCN of 12726617917 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64703 and start
ing SCN of 12726605080 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 64702 and start
No archivelogs were purged or backed up and the current logs were retained....so im somewhat confused....i am not restoring from backup but running active duplicate...
should I re-run the command with:
SET UNTIL SEQUENCE 64713 THREAD 1This fails saying that "ORA-12528: TNS:listener: all appropriate instances are blocking new connections" which is quite normal given that the listener is havig a handle in BLOCKED state for this AUXDB as it is in NOMOUNT state.
Could you please help me on how to proceed?
One option can be to create the controlfile manually and mount the instance before doing the duplicate. I hope Rman can continue from there.
Another option is to go for backup based duplicate.
Is there any other way to go?
Provide static registration on AUXILIARY side for your auxiliary instance and try again.For example change listener.ora file as
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = AUXDB)
(ORACLE_HOME = <your oracle home>)
(SID_NAME = AUXDB)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <auxiliary host/ip>)(PORT = 1521))
)And restart listener on auxiliary host then try again
Maybe you are looking for
-
Sending email to 10,000 addresses without knowing Host and Protocols!!
Context: I am building an "eMail Marketing Campaign" application which takes a list of email addresses (unlimited) and sends an eMail to all of them. My servlet creates an instance of "MyMailHandler.java/class" and passes a list of addresses. Problem
-
Wish I didn't upgrade! and now I need help to figure out how to make it wor
I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox) I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase
-
Reg:Error message in MIGO Transaction
Hi All, I added the new tab strip in MIGO Screen. now i need to make all the fields as mandatory. so using BADI (MB_MIGO_BADI) i gave the mandatory check ( if the Zfield = ' ', then error message) while clicking the check button before posting the ma
-
I want a color laser jet all in one printer
Please tell me
-
This is to all of you who have switched from Tiger to Leopard: Was it a good switch? Martin.