Duplicate device messages

Trying to re-add devices under Common Services 3.3.0: devices that CS appears to have dropped off, I get 'duplicate device' errors. The device cannot be located by either device name or IP Address under either CS or RME, however it does appear in the discovery reports has having been seen. The IP Address for the device IS one of the seed devices used in the discovery process. Any suggestions?

If the LMS server is integrated with ACS, check the Common Services > Device and Credentials > Reports > Devices not configured in ACS report. They will probably be seen there. If they are, you will need to add these devices as network elements in the same ACS to which LMS is integrated.

Similar Messages

Duplicate Text Messages - Pantech Crux

Hello, I began receiving duplicate text messages once I upgraded to a Pantech Crux. The duplicates are not labeled *duplicate message* like others, rather they are just received about 30 seconds after the original.
This happens regardless of sender but does not always happen. It will also happen regardless of whether or not I read the first message before the duplicate arrives.
Is there any solution to this? Will I be charged for all the duplicates?
Any help is appreciated.
Thanks,
Brandon

jmm823 wrote:
Are you still receiving duplicate txt msgs? I've been having the same issue since May and I keep getting the run around. My husband and I have the same phones and first they told me they had to do a "network" update that was supposed to take place on June 27. I've still been receiving them. I called again last friday and the gentleman from tech support told me to do a device software update on my phone. I did that and I'm still getting double txts! Very frustrating!!! I've called around 7-8 times! Not getting anywhere with my problem! During the month of July I had gone over my txt limit and the lady I talked to gave me a higher text package and wasn't going to charge me the difference. But when she did that she canceled my text messaging package and I got billed $180 for text messaging! Not very happy with Verizon right now! We are debating if we should cancel our service thru them and go to another company!
jmm823,
I definitely understand your frustrations and would like to assist with correcting this for you! Our Product Development Team is aware of the issue and are working diligently to provide a permanent fix. In the meantime, I would be happy to review your account and correct the text package and billing for you. We definitely do not want you to have to consider leaving Verizon Wireless! I will send you a message, and you can reply with the requested information.
Thank you again for your patience, and for choosing Verizon Wireless!

Duplicate text messages Handcent msgs

I downloaded the handcent application and it sends out duplicate text messages. People have gotten the same message from me anywheres from 2-5 times. Not everytime, but still annoying is there a way to fix this problem. It has gotten worse just recently

When you download a new messaging application on the phone you would want to make sure that the old messaging application is closed. The default messaging application is probably running in the back ground causing duplicate messages.
Lets try 3 things to correct this issue:
First you would want to disable the default messaging application.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.
Touch Applications.
Touch Running services.
Touch a service (select the default messaging application).
Choose the default messaging application.Touch Stop.
Second could I get you to do a soft reset on the device.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
Third:
Could I get you to dial *228 send and option 1 on the device.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.
Touch Applications.
Touch Running services.
Then re-check your applications, making sure the default messaging application is not running.

IPod nano won't sync; dreaded "duplicate file" message

Suddenly, my old but heretofore functioning iPod Nano won't sync radio podcasts. Gets the "duplicate file" message. I have tried resetting multiple times; reinstalled iTunes, changed the port, checked for plug-ins (no iToner) etc. Ran diagnostic; it fails the device sync test, saying no iPod touch found.
I have seen some other complaints about this.
Is there a solution? I have done most of the troubleshooting steps but did not restore iPod to virginity (hoping to avoid reloading songs onto it).
Thanks in advance for any help.

If you've read the Technical Specification you will find that the nano can only use Firewire for charging, not for syncing:
http://www.apple.com/ipodnano/specs.html
"Charging via USB or FireWire to computer system or power adapter (sold separately)"
So you can rule that out.
Have you tried the 5 R's?
http://www.apple.com/support/

I can't scan with my HP Photosmart Plus B210a, I get a "Failed to open a session on the device" message everytime I attempt to scan to the computer. I'm using the most current driver off the HP website for Mac OSX Lion 10.7

I can't scan to my computer with my HP Photosmart Plus B2010a, I get a "Failed to open a session on the device" message everytime. I'm using the most current driver for OS X Lion 10.7 off the HP website.

I get the same "Failed to open a session on the device" message with Apple Image Capture as I do with the HP Utility software.

Duplicate Text Messages

Hello,
I currently a droid x running android 2.3.3 in the Royersford, PA area. I updated to Android 2.3.3 2-3 weeks ago. After this update I started receiving a noticeable amount of duplicate text messages. The duplicates can number anywhere from 2 to 11 and are received over a ten minute period. As I am sure you can imagine this is extremely frustrating. It is also not restricted to one contact. I have received duplicate texts from 4 different carriers and the majority of types of phones available ranging from iphones to android to non-smartphones.
In an attempt to resolve the issue I visited my local verizon store and after spending about 20 minutes of being asked over and over if i had tried taking the battery out (which I had) I was finally told to perform a factory reset on my phone. I did and after 2.5 hours of redownloading all my apps (apparently they haddn't backed up to google's servers yet) I started receiving duplicate messages again (it actually started before I redownloaded all my apps). I returned to the verizon store in the next few days only to be told that since they could not get the problem to replicate itself in store (this after waiting for 45 minutes for the clerk to go around the store and use every display phone to text my phone) there was nothing they could do to help me, even though I still had duplicate messages in my inbox.
After waiting about a week I grew frustrated enough to try again and they agreed to give me a new phone (which I currently have). I didn't receive a duplicate for about 2 days and then it started again and has gotten progressively worse ever since. I even tried switching from the stock messaging app to handcent but it did not help (and yes I disabled the default messaging app).
Is anyone out there capable of fixing this issue? Is it an android problem, a droid x problem, or a verizon problem? Any help would be greatly appreciated.
A few more bits of information. My mom also has the droid x running 2.3.3 and has recently started experiencing the same problem but not to the extent that I do. My brother has a htc incredible running something other than 2.3.3 (I'm not sure what) and experiences the same problem as myself (this leads me to believe it is either an android problem or verizon but since it is on two different versions of android I am leaning towards verizon).
Thanks for any help anyone can give, and if there is already a topic about this I apologize, I could not find it anywhere on this site.

Hey all back from ice cream break them good Nuttie cones Hi geri you little burger glad you back on here i missed them Gerio O
post . Now on to the subject in hand i've got both Gmail an yahoooo on Birtha. an just Gmail on The Dinc. havent named her yet
got any sugestions throw it my way. But all the way back to when i had my BB i never got a Duplicate MSG unless some one
stupid sent two at my phone wich i asked do u have ants in your shorts. Now i've have had some weired text msg's come to one
of my No.s but i called Ver. an had that stopped they were those pay msg were you pay 1.99 up 9.99 i told teck i dont need phone
S** Block these Turkeys Now so i don't have pute up with that crap any more an the teck said the block is on your Acc. but if want
to use that type of text like what was sent to you your have to call an unblock it again I told him that will never happen . Now for the
record i was'nt going out looking for this crap it was sent to our phone an i had it stopped. But it sounds like his issue is app
related or maybee its something on his acc. that could be triggering something. does.nt hurt to call an check.

Duplicate Email Messages Mail 4.3

Greetings,
I am running Snow Leopard 10.6.4 and using the built-in Mac Mail client 4.3. I subscribe to MobileMe and have my primary mail alias and second mail alias. I use server based rules to manage my inbox.
For the past few weeks, I've been getting duplicate email messages in my inbox.
I have googled this and most of the articles that come back are dated.
Has any one else experienced this?
It has been working fine for months.
I have tried rebuilding my mailbox and have not noticed a difference.
Thank-you,
Derrick

This problem just started-up for me, too. Same Mac mail client; Snow Leopard. I have no rules set. I have two imap accounts feeding the client; only one is misbehaving with the duplicate generation. Need a solution!

Weblogic Message Bridge Producing Duplicate JMS Messages

We have a message bridge that we use to integrate with TIBCO. The message bridge is deployed on a WL cluster. We see duplicate JMS messages produced by the bridge when it is deployed on the cluster. We don't see this behavior when only one ManagedServer in the cluster is active,.
TIBCO version: 4.4.3 V5
WLS: 10.3.3 with patch for bug BUG8732539 (BQC6)
java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2121-linux-x86_64, compiled mode)
We are also seeing a lot of exceptions related to
<May 27, 2011 4:11:57 PM PDT> <Warning> <Connector> <BEA-190032> << eis/jms/WLSConnectionFactoryJNDIXA > ResourceAllocationException thrown by resource adapter on call to ManagedConnectionFactory.createManagedConnection(): "javax.resource.ResourceException: Failed to start the connection ">
However the bridge is active. We are monitoring the message-out count on TIBCO and we observed that we see duplicates whenever there a message is re-delivered. We opened a case with Oracle support and they suggested patch 10258751 which didn't help. The next suggestion was a patch for "Bug 11852771 - [WLS10.3.2]MISSING AND DUPLICATE IN JMS QUEUE MESSAGE MONITORING" but I don't think it will help since our JMS consumers are getting duplicate messages and this is not just a UI issue.
Here is the message behavior when we send a single message:
Timelines
11:34:17 --> Message sent to TIBCO EMS queue
11:34:17 --> WL MS3 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:17 --> WL MS1 says it got the message and committed the transaction
11:34:17 --> Message is visible in the JMS queue in the admin console
11:34:17 --> TIBCO EMS has still not received an ACK from WL for the message
11:34:31 --> TIBCO EMS resends the same JMS message to WL
11:34:31 --> WL MS2 says it got the message and committed the transaction
11:34:31 --> WL MS1 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are two messages in the JMS queue)
11:34:31 --> TIBCO EMS has still not received an ACK from WL for the message
11:34:54 --> TIBCO EMS resends the same JMS message to WL
11:34:31 --> WL MS4 says it got the message and committed the transaction
11:34:31 --> WL MS2 throws an javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable exception
11:34:31 --> Message is visible in the JMS queue in the admin console (At this point there are three messages in the JMS queue)
11:34:31 --> TIBCO EMS receives an ACK from WL for the message
MS04
####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: true
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-6A59E8FE76C4FC4CA149
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:54 AM PDT> <Debug> <MessagingBridgeRuntime> <MS04> <MS04> <[ACTIVE] ExecuteThread: '109' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-6A59E8FE76C4FC4CA149> <> <1306521294611> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<193654.1306521294611.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
MS03
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257342> <BEA-000000> <Bridge MessageBridge1 Successfully got connection to the target destination>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1: both source and target adapters support XA = true>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 supportsMDBTX = false supportsXA = true async = true>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 WorkMode = Exactly-once>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntimeVerbose> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257343> <BEA-000000> <Bridge MessageBridge1 Entering processMessages() ------ >
####<May 27, 2011 11:34:17 AM PDT> <Error> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-3AA29116A4CA622834EA> <> <1306521257343> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:200)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'eis/jms/WLSConnectionFactoryJNDIXA' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:948)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:634)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1227)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy62.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1431)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:117)
... 8 more
).>
####<May 27, 2011 11:34:17 AM PDT> <Warning> <MessagingBridge> <MS03> <MS03> <[ACTIVE] ExecuteThread: '30' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521257344> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
.)>
MS02
####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271386> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: true
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-679AF074F381152F047C
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:31 AM PDT> <Debug> <MessagingBridgeRuntime> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-679AF074F381152F047C> <> <1306521271392> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<196075.1306521271386.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:54 AM PDT> <Error> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:225)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
... 2 more
).>
####<May 27, 2011 11:34:54 AM PDT> <Warning> <MessagingBridge> <MS02> <MS02> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521294610> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
MS01
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257536> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) received message:
JMS Message Class: TextMessage
JMSMessageID: ID:MS01.4B044DDFEE1F1:25354AD
JMSCorrelationID: null
JMSDeliveryMode: PERSISTENT
JMSDestination: Queue[SourceQueue1]
JMSExpiration: 0
JMSPriority: 4
JMSRedelivered: false
JMSReplyTo: null
JMSTimestamp: 1306521256905 (Fri May 27 11:34:16 PDT 2011)
JMSType: null
Transaction Id: BEA1-72BC818FE2BB8C2655C6
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:17 AM PDT> <Debug> <MessagingBridgeRuntime> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-72BC818FE2BB8C2655C6> <> <1306521257542> <BEA-000000> <Bridge: MessageBridge1 (processMessages()) successfully sent message:
JMS Message Class: TextMessage
Old JMS MessageID: ID:MS01.4B044DDFEE1F1:25354AD
New JMS MessageID: ID:<195581.1306521257536.0>
<?xml version="1.0" encoding="UTF-8"?>
<commands ...
>
####<May 27, 2011 11:34:31 AM PDT> <Error> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200015> <An error occurred in bridge "MessageBridge1" during the transfer of messages (java.lang.Exception: weblogic.transaction.RollbackException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1871)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:330)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:293)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1534)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1006)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1083)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:495)
at weblogic.connector.transaction.outbound.XAWrapper.setTransactionTimeout(XAWrapper.java:457)
at weblogic.connector.transaction.outbound.RecoveryOnlyXAWrapper.setTransactionTimeout(RecoveryOnlyXAWrapper.java:34)
at weblogic.transaction.internal.XAResourceDescriptor.setXAResourceTransactionTimeoutIfAppropriate(XAResourceDescriptor.java:1422)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1223)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at weblogic.connector.security.layer.AdapterLayer.setTransactionTimeout(AdapterLayer.java:485)
... 14 more
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1185)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:282)
at weblogic.transaction.internal.XAServerResourceInfo.enlistIfStatic(XAServerResourceInfo.java:181)
at weblogic.transaction.internal.ServerTransactionImpl.enlistStaticallyEnlistedResources(ServerTransactionImpl.java:1565)
at weblogic.transaction.internal.ServerTransactionManagerImpl.dispatchRequest(ServerTransactionManagerImpl.java:551)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:132)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:34)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:111)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
... 1 more
).>
####<May 27, 2011 11:34:31 AM PDT> <Warning> <MessagingBridge> <MS01> <MS01> <[ACTIVE] ExecuteThread: '36' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306521271384> <BEA-200026> <Bridge "MessageBridge1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was java.lang.Exception: MessagingBridgeException: Messaging bridge operation failed
.)>

@Tom, thanks for your hints and sorry for my delayed response. Here are my answers to your queries…
-- Does messaging work, without any exceptions, when only one bridge is active?
It works fine when only one node of the cluster is active. -- I'm not familiar with Tibco monitoring, but I suspect that the "message-out count on TIBCO" stat doesn't always imply that there's a duplicate message. It could mean that an initial message delivery attempt failed, it's transaction rolled back, and the message was redelivered. Redelivery after a failure is normal - the original delivered message, if one actually made it onto a WebLogic queue, should be discarded by WebLogic when its failed transaction eventually rolls back (before its ever handed to a consumer application).
You are absolutely right. The mismatch in count was due to redelivery attempts. We could see that as soon as we turned on trace in TIBCO-- The posted stack traces look like they may be JVM stdout/stderr scrapes, which are often automatically truncated, for example, see the "... 8 more" listed at the bottom of one of the stack traces below. There might be more information in the full stack trace for the "Resource manager is unavailable" exception. Full traces are logged in each WebLogic Server's log files.
I tried redirecting the output and even set "stdout Stack Trace Depth:" to -1 but I am not albe to see the complete trace.-- The setTransactionTimeout NullPointerException error message looks like it is collateral damage from the original reported "Resource manager is unavailable" exception that's thrown earlier during the enlistResource() step. If you are truly getting duplicates, then I think this is a clue that the bridge is somehow (stupidly) trying to proceed with forwarding the message despite the fact that there's no current transaction on the thread... 
I have a case open with Oracle support and we have extensive debugging turned on. Here is what the engineer came back with. There is an issue with XA transactions in JCA adapter when it talks to third party providers like TIBCO. Since the resource names are not unique across the cluster, a XA transaction is started on multiple nodes in the cluster for the same message. All transactions abort but the message is persisted and TIBCO redelivers the message since the connection is severed when the transaction aborts. We were able to reproduce this scenario at will with our setup and Oracle was able to reproduce the issue too.  -- Can you check the state of the message on the WebLogic Q? The fact that a message is shown on the WL console doesn't necessarily mean that the state of the message is visible (it could be waiting for the transaction to commit - something that apparently never happens). On the console: Services -> Messaging -> JMS Modules -> [module name] -> [destination name]. 
Our consumer was getting duplicate messages. This confirms that the console was not giving us incorrect information. The console showed that 2/3/4 messages were in "current" state when we expected only one message. -- Make sure that the bridge's Tibco destination is a Tibco queue not a Tibco topic (it's happened). 
Yeah we made sure it was a Queue. -- Can you post your bridge and destination stanzas from your config.xml?  
Will try to do this shortly but have to strip out lot of information. -- I vaguely recall that there was a problem with untyped connection factories in Tibco at one point (not sure). You might want to try changing the Tibco configuration to spin-up "XA Queue Connection Factory" instead of just an "XA Connection Factory" (plus modify the bridge configuration accordingly). 
We tried this but it didn't eliminate this issue. One thing we did notice however was that the number of rollbacks were greatly reduced. 
Here is the workaround that Oracle is suggesting: Create pinned destinations and assign it to a distributed queue. This will keep the transactions local and hence eliminate the duplicate transactions and rollback. We tried it and it eliminated the dups issue. However I discovered another bug during my testing. Our cluster messaging mode is "Unicast" and message forwarding from zero consumer queues to queues with consumers fails. We have four/five nodes in the cluster and two consumer threads. I observed that the zero consumer queues always forward to one queue in the cluster that has consumers. The forwarding stalls when I bring down the node that has consumers. Again, we were able to reproduce this issue at will and Oracle has acknowledged that it is a bug. They've reported that Unicast fails without any warning whereas Multicast fails with a warning in the log. We have observed this message forwarding stalling even with UDQs.
I have another case open for an issue where our message bridges that transfer messages from TIBCO to WLS stalls after sometime. The status is shown as active but it is not doing anything. The server instance shows stuck threads trying to roll back a message. TIBCO logs indicate that it is receiving a request to rollback a transaction but it is not finding the transaction to rollback. The only way to recover from this condition is to restart the cluster. I am fairly confident that he root case for this issue is again the XA transaction issue. I changed our UDQ to pinned destination in one environment and we are no longer seeing dups or bridge stalling there. Hopefully Oracle can resolve the message forwarding issue.Thanks again….

HP mini 1151nr reboot and select proper device message

I am wanting to reformat my HP mini laptop with windows 7 but this select proper device message is not allowing me to. I have the operating system disk but my laptop is not recognizing the hard drive. I go to diagnostics in the bios setup and it indicates the primary hard disk is not supported. I am stuck and have no clue what to do next. Should I replace the hard drive?

Yes, it sounds like your hard drive may be dead.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Duplicate Devices in LMS 3.0.1

Hello clark,
In device Management on common services I'm getting duplicate devices.the same no of devices are seen twice with the management IP (loopback IP address).what could be the possible reason.
Till yesterday it was fine i dont what gone wrong?
Thanks,

Hello clarke,
Assuming you are in the directory where the patch lies??
I have kept the folder in D: and am running the command from cmd prompt
i have tried the below before Still i get the below error: Actually i not familar with windows command prompt can u send me the exact step to excecute the command.
D:\> progra~1\cscopx\bin\perl CSCtb16166-0.pl
Can't open perl script "CSCtb16166-0.pl": No such file or directory
i m running the command from start>run>cmd>D:\> progra~1\cscopx\bin\perl CSCtb16166-0.pl

Duplicate output message for invoice

Hello,
I'm searching a Bapi or MF to duplicate an output message executed on invoice.
For exemple:
on invoice 12345 I create and execute the message RDA0 (for exemple for print).
Now, by a zprogram I would duplicate this message.
Any idea ?
Thank you.

Hello,
tks for reply, I run both
1. RV_MESSAGES_INSERT
2. RV_MESSAGES_UPDATE
and the message is created. Anyway, I chose mode 'Archive only', and the archive is not done.
Do you jnow why ?
Thank you.

Duplicate Devices In LMS 3.2

Hi There.
I have trolled this forum, and I find issues with LMS 3.1 and Duplicate devices and the engineers say that it is fixed in LMS 3.2, but I have a customer who is experiencing this with LMS 3.2 below is the customers request:
This has now been the 3rd week in a row that after the XXXXX discovery we
ended up with duplications.
I have looked at a few and most are due to 2 or more ip addrs defined on te
device.
The example here are the RCC MSFCs which we manage via VLAN50 ip and the source
is set to VLAN50 on the device but LMS also discovers it via a loopback addr.
It is causing us hassles with max limit on LMS system as well as having
duplications on reports.
Please could you give me some advice.
Joan

Ok ran the walk, and it can be read by one of the devices showing up as a duplicate, below is a short extract, should you require the whole walk, ill be happy to post it
The following is a SNMP walk of device 10.111.1.2 starting from .1.3.6.1.2.1.4.20
SNMP Walk Output
.1.3.6.1.2.1.4.20
RFC1213-MIB::ipAdEntAddr.10.10.10.10 = IpAddress: 10.10.10.10
RFC1213-MIB::ipAdEntAddr.10.111.0.0 = IpAddress: 10.111.0.0
RFC1213-MIB::ipAdEntAddr.10.111.0.4 = IpAddress: 10.111.0.4
RFC1213-MIB::ipAdEntAddr.10.111.0.16 = IpAddress: 10.111.0.16
RFC1213-MIB::ipAdEntAddr.10.111.0.75 = IpAddress: 10.111.0.75

Duplicate text messages in messages+

I am receiving duplicate text messages when using messages+ as my default app. A msg I send is sent twice & I receive messages twice. This just started about two weeks ago. I have had my galaxy5 for two months. I turned off the stock app yesterday & I am still getting & sending duplicate texts. Cache has been cleared without success. Help please!

Try the stock app in safe mode. You may need a factory reset

Duplicate Inbox after trying to solve Gmail duplicate sent messages...

.. was trying to solve the problem of duplicate sent messages with Gmail email on the BB Curve 8350. In following instructions from this message board, I instead ended up with duplicate INBOXES. Now, when I unregister and re-register my gmail account on my phone, it creates a new icon. This has resulted in my original problem being multiplied by four. What I mean is, now I have duplicate sent messages in TWO DIFFERENT INBOXES. Originally, my gmail account went to the main Inbox on the phone. I cannot delete the main message system.. HELP!

It seems I found a bug!
I now understand what happens, although don't know the reason. The symptoms are caused by the "Auto-Expunge" feature on Gmail. I disabled it and fooled around the options and this is what I discovered:
When I set "the message will be archived when disappear from the last visible folder", the message is archived whenever I try to move the sent messages to any other folder than the "Sent" one;
When I set "move the message to trash when disappear from the last visible folder", the message is deleted and moved to trash whenever I try to move it from the "Sent" folder to any other.
In other words, for some awkward reason, Lion's Apple Mail is not handling folder-to-folder operations and Gmail thinks that the messages has been removed from the last visible folder and does with it whatever it was instructed to, which is either to archive or move to trash.
Since by disabling Auto-Expunge Gmail waits for the client to take the action, it seems that Apple Mail is sending the wrong command or sending it on the wrong timing.
I wonder is Apple is aware of this.
Any suggestions?

Random duplicate text messages.

I keep recieving duplicate random messages after upgrading to the iPhone 6. Most of the time it is at the time i recieve a message or mms but it has happened where it can be many hours later. I have recieved the same message up to 5 or 6 times in one or two cases. Any idea why this might be happening?

Happy Friday Traffalger! We're excited to partner with you and get the duplicate texts issue resolve once and for all. Are the duplicate coming from only one contact or multiple contacts? Do you have iMessage turned on? If so, trying turning iMessage off & retest. Let us know the results.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Duplicate device messages

Similar Messages

Maybe you are looking for