Duplicate Project + Used Clips Only not working as expected.

I am revisiting this once again and have had some good information on the matter, but I am not getting the results I think I should.
Here's a link of instructions I followed and addresses my exact concern: http://www.premiumbeat.com/blog/how-to-archive-projects-in-final-cut-pro-x/
I want to archive ONLY the project and clips used for a project.
If I export my project using the current settings (ProRes) then shouldn't the Duplicate Project and Used Clips only feature give me a a backup that is roughly the same size as my exported Quicktime?
Currewntly when I use any of the Duplicate operations other than the 1st, all media is duplicated, not just what is needed.
Has anyone had success with just getting what you need for the project?
The reason why I don't want to archive all of the media outside the project is due to hard drive space. I have the camera raws backed up already. I just want to be able to open the project again if needed and only the project with necessary media.
Thanks.

When you say " I also changed the default start to 7:30 and end 4:30", are you talking about the
project information in the project tab? You're supposed to be able to specify only one of the parameters (start date or finish date) depending if you're back-planning or not.
Check if the option "ignore resource calendar" on the task if checked.
Also try to press F9.
Are the task manually scheduled? Do you have constraints on the tasks?
Maybe share a screenshot so it'll be easier to help you.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

Where has "Duplicate Project + Used Clips" gone in 10.2 ?

I want to backup my project and all the media it uses to an external hard drive.
In 10.1 I could use, Duplicate Project + Used Clips , but where is that in 10.2?

I'm assuming you mean 10.1.2, not 10.0.2. For the recent version, connect the external drive. Make a new library on it and set the library properties to be managed media, so the media in inside the library. Drag the project from the existing event on your drive to the event on the external drive, that will copy the project and the used media to that event. You'll also have the option to copy render and optimized media. I'd forget about that. Mail the drive and your colleague should be good to go.

Oracle APPS custom form using KFF is not working as expected

Hi,
I have created a custom form and using KFF to accept code combination in line block. My custom form is based on AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE.
When I query the records in form and update the code combination field using keyboard (typing or copy-paste) it works fine at first time but when I re-enter another code then it does not accepts the new code and reverts to previous code. Form accepts the same code when KFF screen is using by pressing LOV button. I concluded this problem as "when record status is QUERY then KFF works fine with keyboard but when record status changes to CHANGED then it does not accepts the new code when entered using keyboard".
I have created all triggers and invoked relevant fnd_flex.event in triggers. I have created PRE-QUERY, POST-QUERY, PRE-INSERT, PRE-UPDATE, WHEN-VALIDATE-ITEM, WHEN-VALIDATE-RECORD, WHEN-NEW-ITEM-INSTANCE, KEY-EDIT, KEY-LISTVAL at form level and calling FND_FLEX.EVEND and APPS_STANDARD.EVENT (where required) in triggers.
This same issue is in AP Invoice Workbench form. When updateing code combination in distribution block in invoice form is showing same behaviour.
I am running this form in 12.1.2, same form is working in other instance which is on 12.1.3.
Please help.
Regards,

Please check the below link just to make sure all steps are taken care.
http://oraclemaniac.com/2012/08/15/how-to-add-a-descriptive-flexfield-dff-in-a-custom-oracle-apps-form/

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

Windows Server 2012 - Printing using UNC path not working

Hi,
I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
With
the web app I receive an error "The data area passed to a system call is tool small".
Also,
in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

I have contacted IIS forum support.
Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
Their final response:
Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
works while the Samsung fails, as the HP one just "happens
to work",
http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
Similarly, System.Printing was designed just for WPF.
About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
to help you out. This is not a trivial scenario.

Validations using OB28 is not working for GL posting using FB01

Hi Experts,
Validations using OB28 for posting using FB01 is not working.
My requirement is after entering a line items and click post validations should be triggerd.
i want to block a posting based on document type.
i have maintained as below..
Prerequisite.
( BKPF-TCODE = 'FB50' OR BKPF-TCODE = 'FB01' ) AND (
BKPF-BUKRS = '1000' OR BKPF-BUKRS = '0001' OR
BKPF-BUKRS = '0002' ) AND BKPF-BLART = 'XX'.
check.
Used userexit to check sy-ucomm = 'BU' (for posting).
entries are maintained in OB28 for relevant company codes.
it is working for FB50 but not FB01.
same thing i tried to maintain at header level as well as item level. but it is working only for FB50 but for FB01.
Please help me.
Regards.
Venu.

Hi Venu,
Go to GGB0 and expand the navigation till you reach the validation name of line item level and choose menu item *Validation -> Simulate.
Here you can enter the inputs, those you are entering while doing FB01 and execute it.
Then in the results, you will have the log for each step of your total validation of line item level.
Check , whether your questioned STEP's pre requisite is met and check is not fullfilled.
Accordingly you can make the changes to the STEP.
This info may help you.
Regards,
Srinivas

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

Did you talk to your carrier?

I keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

i keep getting a message that my ipad could not be activated because activation server is unavailable and when i try to use itune its not working as well.Plssss help

Has this iPad ever been jailbroken, had the OS rolled back, or used a beta version?

Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!

Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

Events in SubVi not working as expected

Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
Solved!
Go to Solution.
Attachments:
Main.vi ‏11 KB
SubVi.vi ‏12 KB
SubVi_2.vi ‏15 KB

Your main problem is DATA FLOW. A loop cannot iterate until EVERYTHING in it has completed. So, as you have it, you have to have both event structures execture before you can go back to look for the next event. So if you insist on having these subVIs, they need to be in seperate loops.
BTW, you can get away with a single subVI. Go into the VI properties and make it reentrant (preallocated clone). Then each call of your subVI will have its own memory space. A lot easier to maintain that way.
And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Main_MODTR.vi ‏10 KB

Container-Managed Transaction Type Attributes not working as expected

I am having a problem with the container-managed transactions not working as expected. I have 2 methods that work as follows:
MethodA{
for(a lot)
call MethodB;
@Transaction Type = RequiresNew
MethodB{
EntityManager Persist to database
I want the code in MethodB to be committed to the database when methodB returns. The problem is that I am running out of memory and MethodA is failing. When methodA fails after numerous calls to MethodB nothing is persisted to the database.
It is my understanding that when using requires new transactions that a new transaction is started for each call to the method and ends when the method returns while the calling method transaction is suspended.
How am I misunderstanding the requiresNew transaction attribute. What can I do to make a batch insert into my database that will not run out of memory (commit when a methodB returns)?
Thanks in advance.

The problem is that EJB invocation semantics for security, container-managed transactions, etc.
only apply when an invocation is made through an EJB reference. In your case, you are directly
invoking the implementation method from within the bean. The EJB container has no idea that's
happening. It's no different than invoking a utility method.
In order to get the behavior you'd like, you need to retrieve a reference to your own bean and invoke
through that. You can use SessionContext.getBusinessObject() to get the EJB reference for the
business interface through which the method in question is exposed.
--ken

Namespaces not working as expected

Hi, I've got problems with namespaces not working as expected. When I isolate a process into a new network and mount namespace, a newly mounted file system will be visible to all processes.
Steps to reproduce:
$ sudo unshare -mn bash
bash# mount -t sysfs sysfs /sys
bash# exit
$ cat /proc/mounts
Result:
/proc/mounts will contain a new line for sysfs. This means the /sys/fs/cgroups directory will appear to be empty as the new sysfs is mounted over the old However you can undo it by
sudo umount /sys
Expected result:
The /sys directory will only be new inside the bash process started using unshare and not anymore once you exit bash.
Did I understand something wrong? Or might this be a bug in the kernel?
Note that when using
unshare -m bash
without isolating the network namespace it will refuse to mount sysfs as it is already mounted or busy. Strange.

Hello, because sysfs is shared, see unshare(1) for more details.

DB Adapter polling as singleton process is not working as expected

Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
As suggested in oracle documents , below is the parameters configured in composite.xml file.
<service name="polling_Mange_Alert_Events"
ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
<binding.jca config="polling_Mange_Alert_Events_db.jca">
<property name="singleton">true</property>
</binding.jca>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
override="may">1</property>
<property name="jca.retry.backoff" type="xs:int" many="false"
override="may">2</property>
<property name="jca.retry.maxInterval" type="xs:string" many="false"
override="may">120</property>
</service>
Below is the JCA file parameters configured :
<adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
<endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
    <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
      <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
      <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
      <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
      <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
      <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
      <property name="MarkReadValue" value="Processing"/>
      <property name="PollingInterval" value="10"/>
      <property name="MaxRaiseSize" value="5"/>
      <property name="MaxTransactionSize" value="5"/>
      <property name="NumberOfThreads" value="1"/>
      <property name="ReturnSingleResultSet" value="false"/>
      <property name="MarkUnreadValue" value="Pending"/>
    </activation-spec>
</endpoint-activation>
</adapter-config>
This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
Please advise to solve this issue ?

Hi,
1.Set Singleton property outside   <binding.jca> like this:
<binding.jca config="polling_Mange_Alert_Events_db.jca"/>
<property name="singleton">true</property>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
2.Also you can try setting these values in jca file:
<property name="RowsPerPollingInterval" value="100"/>
<property name="MaxTransactionSize" value="100"/>
3. try to increase the polling interval time.
Regards,
Anshul

UpsertDocumentAsync not working as expected

I'm using UpsertDocumentAsync to either insert or update a document, but it doesn't seem to work as expected. When I use it either inserts / creates or
replaces the document. I doubt I'm calling it wrong?
await client.UpsertDocumentAsync(documentsLink, this.document);
Working as expected (but with incorrect name) or not working as expected?
Regards,
Joakim
Joakim Rosendahl Consultant at OnTrax AB, Sweden.

Found this one (doesn't contain the work PATCH though)
http://feedback.azure.com/forums/263030-documentdb/suggestions/7075256-provide-for-upsert
Voted for that one, but it doesn't seem like the developer community is interested in upsert/patch functionality =/.
Joakim Rosendahl Consultant at OnTrax AB, Sweden.

Duplicate Project + Used Clips Only not working as expected.

Similar Messages

Maybe you are looking for