Duplicate requisitions being generated.

I have two issues that are similar:
***FIRST -
On 5/2/08 I cut a PO (4500113566) for Material 1000067027 (requisition 100213878).
A few days later another requisition was generated (100216117) for the exact same Material. Min/Max on the Material master is set to 1 and 1, there are no reservations and no work order assigned.
***SECOND -
On 4/28/2008 I cut a PO (4500113270) for the following materials and
quantities:
MM 1000071901 (req# 100214520) Qty 3
MM 1000071902 (req# 100214521) Qty 2
MM 1000071903 (req# 100214522) Qty 2
A few days later duplicate reservations were generated for the exact same materials. With no work orders or reservations assigned and the Min / Max levels set to the appropriate levels.
MM# 1000071901 (req# 100215638) - qty 1 Min/Max 1/1 MM# 1000071902 (req# 100215639) - qty 2 Min/Max 2/2 MM# 1000071903 (req# 100215640) - qty 2 Min/Max 2/2
We need to find out why duplicate reqs are being generated.

Hi Reinhardt,
I am not sure please give it a try, Auto Syndication Task Delay (seconds) Integer. Default is 0. Check if it helps..
Set it to 0 if you have set any other parameter, see Figure 87. The MDSS-specific Report Detail pane page 279/403
http://help.sap.com/saphelp_nwmdm71/helpdata/en/4b/71608566ae3260e10000000a42189b/MDMConsole71.pdf
It may be also possible because of Bug, let's have input from others if it works else i would suggest to raise an OSS Note to SAP
Regards,
Mandeep Saini

Similar Messages

Stop purchase requisition being generated for third party scenario

Hi All,
I have a requirement that in case of third party order the Purchase Requisition should Not be created if the order has a header level Delivery block.
How to fulfill this requirement?
Thanks & Regards,
Amrish Purohit

Hi Amrish,
I do have same requirement can you please let me know what you have done for the same.
Your reply will be very helpful for me in this regards
Regards
kiran

Master data texts - duplicate rows getting generated

Hi,
I have a Master data object which has only texts and I am loading the data from a flat file. I dont have any issues while loading the data, but after I load the transaction data in the DSO, I am seeing that duplicate rows are being generated in the Master data Infoobject
ex:
abc - blank row
abc1 - Immediate
where as what I need is
abc - Immediate
when I do not load the transaction data, and when I look at "Maintain Master Data"in th Infoobject it is
abc - Immediate
Can any one tell me how I can resolve this issue.
When I create a Bex query and populate the Infoobject with Key and Text, It repeats the Key value only and not the text
as
abc - abc
Any advise....
Thanks

Firstly check have you maintained any compound infoobjects...If yes then remove the compounding infoobjects to get your desired results.
If you have not maintianed any compunded info object, then in the DTP of the Infocube, under UPDATE tab select the checkbok no update without masterdata.

Test-OutlookConnectivity WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.

Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer   ServiceEndpoint                               Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx                 Autodiscover: Web service request. Success   46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!

hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId                  : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint             : autodiscover.domain.com
Id                          : Autodiscover
ClientAccessServer          : CAS01.domain.com
Scenario                    : Autodiscover: Web service request.
ScenarioDescription         :
PerformanceCounterName      :
Result                      : Success
Error                       :
UserName                    : Gazpromuk.intra\extest_645e41faa55f4
StartTime                   : 8/21/2013 4:08:50 PM
Latency                     : 00:00:00.1250048
EventType                   : Success
LatencyInMillisecondsString : 125.00
Identity                    :
IsValid                     : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
    + CategoryInfo          : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
    + FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867

Site Web Analytics - no usage data being generated

Hello all:
I have a SharePoint Foundation 2013 farm with 2 WFE - 1 Search Server and 1 DB server. Search Service Application has been configured and functioning properly. Usage and health Data Service Application has been created and started. Usage
data collection is enabled and the "Analytics Usage" check box is checked. Usage Data Import and Usage Data Processing timer jobs are scheduled and run successfully.
But, I still get the following error when I go to the Site Web Analytics "A web analytics report is not available for this site. Usage processing may be disabled on this server or the
usage data for this site has not been processed yet."
After doing some research, some folks have suggested the following which has to do with manually enabling the receivers via powershell - which I have done but still no report and same error.
http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
Other Internet searches indicate that Web Analytics Reports is no longer available in SharePoint Foundation 2013:
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://sharepoint.stackexchange.com/questions/63099/where-is-the-web-analytics-service-in-sharepoint-2013
There is also a TechNet question which indicate that "Microsoft Support confirmed me there's a bug in SharePoint Foundation 2013 in the Database that's going to be fixed in the June or August CU"
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5372109c-8a6e-4d31-aa34-13b6cbde52cf/sharepoint-foundation-2013-web-analytics?forum=sharepointgeneral
But, there is no resolution if this bug has been addressed or not.
Therefore, I would really like to know what the deal is with this issue. At the moment, I do not see any usage data being generated on any of the SharePoint Foundation servers in the farm.
Please advise.
Thank you,
Rumi

Hi Rumi,
Find a same issue internaly which says that the links Site Web Analytics is no longer valid in SharePoint 2013 Foundation due to the changes in analytics service application architecture, so you may need the SharPoint enterprise edition for using
this feature.
Symptom
- Recently, we upgraded to SharePoint Foundation 2013 from WSS 3.0. In SharePoint Foundation 2013 sites, we see the option to click on Site Web Analytics reports but when we click on it, we get an error.
- Clicking on Site Web Analytics reports from Site Settings \ Site Actions produces the error: “A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data for this site has not been processed yet.”
- We have ensured we have logging enabled (multiple categories)
- Example Site: http://sharepoint2/sites/IT/Projects/SAP/_layouts/15/usageDetails.aspx
Cause
By Design
1) The links in Site Settings from a site collection are no longer valid in SharePoint 2013 (due to change in Analytics Service application architecture changes...part of Search Service now)
2) SharePoint Foundation 2013 does not support Usage Reporting Analytics
Resolution
o Purchase a license for SharePoint Server 2013 Enterprise, and build out a farm for it (the Foundation SKU cannot be upgraded in-place to Server).
o Once built up, you could copy your databases over and attach them to the Server farm and do your cutover.
o Going forward from there, you would be able to have access to the Usage reports.
Also as you have found that msdn blog with the explenation that it is not available in SPF 2013.
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://technet.microsoft.com/en-us/library/jj819267.aspx#bkmk_FeaturesOnPremise
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Daniel Yang
TechNet Community Support

"The report is being generated. Please try again later. " for last 4 hours

Hi,
I am try to check the report function which the azure portal has for Azure Active Directory Premium. However, it's showing "The report is being generated. Please try again later." everywhere for
4 hours already.
Is there anybody can help me to figure it out what's happen? Maybe I miss something?
Thanks!
Kevin

Hello,
Since we have not heard back from you we are archiving the thread.
Please let us know if you are still facing the issue.
Regards,
Neelesh

BPM alert not being generated

Hi guys,
I'm having quite a little trouble in doing one thing which has been done for several times but which is giving me a hard time...
I've created a bpm process which in an error condition will trigger a simple alert.
I've tested the process and everything goes allright, except the alert. What is happening? Well, the alert is not being sent to my inbox. Why? Maybe because the alert is not being generated.
I've went to sxmb_moni_bpe and everything is OK. I can see the message of the alert being fired. After that I went to slg1 to see if my alert is being generated, and the answer is no. It's not being generated....
I've gone through Michal's blogs and everything was checked...The question is, if I execute RSALERTTEST with my alert category, the alert is generated and send to my inbox. Do you have any ideas?
Thanks a lot for your attention

Hi,
Yes the job scheduling is needed only for Sp14 and below.
Can you recheck if the Alert is actually getting triggered or not in the BPM in the control step? Make sure that you have given the correct Alert Category in your Control Step and also, make sure that the recipient in your alert as well as the Alert Inbox entry you are seeing is the same.
Finally, refresh the Alert Inbox.
Regards,
Bhavesh

Purchase requisition not generated

Hi Gurus,
Purchase requisition not generated at the time of sales order for Item category tab. Can you please let me know the posible reason.
Thanks in advance...

Hi,
As per my understanding, you are running Third Party Process, if yes then, please maintain the following setting for the same;
Mater Data Settings:
1. Item Category Group as BANS in sales org 2 in MM02
2. in MRP2, in procurement type should be 'F'
SPRO Settings:
1. Item Category TAS: Maintain Billing relevance as 'F'
2. in VOV6 Schedule Line CS: doesn't have Movement type therefore keep the field as blank
3.ASSIGNMENT: assign Schedule line CS to item cat TAS in VOV5 and TAS to order type in VOV4
4. in vov6 Schedule line CS Item Cat as '5' i.e. Third party and account assignment cat as 'X"
Now run the process..I hope this will help you...
Regards,
Bharat B

SWF File not being generated by compiler

I am using Flash Builder 4.5.
One of the modules that compiles without error is still not being bound into the runtime image (in this case debug).
There are no compiler errors (auto build is switched ON) but a swf file is not being generated.
I have tried removing the reference to the module in the Project ->Properties->Modules window and then adding it back in to no avail.
This was working up until I made a change to the module in question and then saved it.

I would check all imported images in the library. If you cannot see the image in your library preview; there is a good chance that there is an issue and it will need to be reimported.

Spool file not being generated in production server

Hello
Our end users are using automatic payment program F110 to print multiple cheques.
The settings in SPAD are identical in Quality and Production Server,but some how
spool file is not being generated in production.
Test printing is fine in Quality server.
Printer being used is Epson LQ 300.Device type is EPESCP2.
We are using z custom page size ,and it is assigned to printer device Type as well
Would be very great if some can can comment on which settings to check,as SPAD setting is
same in both server ,yet no spool.Very Very urgent.
Iam not sure ,whose domain is it now-BASIS or ABAP.
Thanks a lot
Nouman

If there is a problem with the spool, the variant that is being in F110 parameters.
As you are saying the quality system is working fine, please compare both the variants in Production and Quality systems.
This should solve your situation.

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

Logs not being generated

I have two wfe servers, in one server the logs file are being generated but another server no log files only usage files
what could be the reason. Under central admin monitoring uls logs have been already enabled.

Hi Rizzk,
Have you solved this issue?
Have you checked and added the service account for SharePoint Services Tracing in local group Performance Log Users or Administrators on SharePoint server, then restart this service?
http://www.justinkobel.com/post/2013/06/07/Solving-ULS-Log-Files-Being-Created-But-Empty-(0-Kb).aspx
http://sharepointinsight.wordpress.com/2010/04/05/solution-for-zero-byte-sharepoint-2010-log-files/
Thanks
Daniel Yang
TechNet Community Support

Emails not being generated using UDF

Hi,
We had setup a functionality to send email via UDF using the following blog.
Mail without email adapter? Part - I - Process Integration - SCN Wiki
This worked fine for some time. However, it does not generate emails anymore. There were no changes done on the objects. We checked the java mail service settings as suggested in some of the SCN posts and everything looks configured fine.
We are not able to determine what is preventing the emails from being generated. Any pointers would be really helpful.
We are using SAP PI 7.31 java only installation.
Thanks,
Ravi

Hi Ravi,
Did you check SMTP services availability?
SMTP Configuration in SAP XI - Process Integration - SCN Wiki
Regards,
Krupa

Reports not being Generated

I use Crystal Reports with another program that supposed to generate 2 reports with a click of a button, but it is not working. The reports are not being generated. I installed Crystal Reports on my system twice and there doesn't seem to be a problem with the installation, but the program is not working. Please help.

I am fairly new at this so let me try my best to answer these questions:
Crystal Reports XI
Visual Studio? Not sure
No service pack applied. How and where do i get it?
I am using Windows XP
I am not viewing the reports as it has to be generated before i am able to view and the systems does nothing after I click the generate button
No have not tried to view a single report; i don't know how.
I have not used Crystal reports designer for anything else.
Edited by: Sharon Aird on Dec 1, 2008 5:05 PM

Traces are not being generated

hi,
I have 9.1.0.8 database on windows 2003 (32 bit). I am suing following statement to start system wide tracing but i don't see any tarces being generated at user_dump_dest location. any idea what is going wrong and what thing i am missing?
ALTER SYSTEM SET EVENTS '10046 trace name context forever, level 8';
Timed_statistics is set to true
Salman

Strange - what you have done should work, it works on my 10G database OK.
Sorry but dont have much else to add ...
I presume that if you just do it at session level it works ok?
ALTER SESSION SET EVENTS '10046 trace name context forever, level 8';

Duplicate requisitions being generated.

Similar Messages

Maybe you are looking for