During restore of my backup on iphone 5s i saw my photos and videos get doubled on ios 8.0 and moreover if i use to go at my computer and then open my iphone and in folder i see some files name local disk and my photos please help my memory doubles.
during restore of my backup on iphone 5s i saw my photos and videos get doubled on ios 8.0 and moreover
if i use to go at my computer and then open my iphone and in folder i see some files name local disk and my photos
please help my memory doubles.
I'm not sure, but I know it's not recommended to upgrade to iOS 8 on anything older than an iPhone 5. I only lost my music playlists and music that was on my phone, but that music is also on my iTunes, not the playlists though, and I don't want to go through ALL my iTunes library to fix it either... But it seems I don't have a choice right now.
Whatever you do, do NOT upgrade to iCloud Drive, keep iCloud till OS X Yosemite comes out, if your computer is a Mac. I also just noticed that all my documents on my phone are gone from Pages, BUT if I go on the iCloud website they are still there. Hopefully it will all work itself out when I can update my macbook pro to OS X Yosemite.
If you backed up your phone and all your purchases off your iPhone prior to trying to upgrade you should be fine... But I'm not even remotely sure.
Similar Messages
-
i purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!
Yes, I have a TLP license, so which kind of upgrade should I buy?
I'm an Italian user and I would prefer to contact support by web chat but I can't find it in the website, please can you help me? Thank you, I'm desperate! -
Hello, I am and IIN Intitute of Integrative Nutrition in New York student. My iPAD 2 is part of my school material and was uploaded with all Videos and Audio classes for the whole program. I recently typed in my passwork incorrectly and disabled my iPad it is giving me the message " connect to i-tunes". I am afraid to loose my lectures. Could anyone help me with some information please? Thank you very much. Wouga22
If you do not have a backup you are going to lose everything on your iPad and even if you do have one, you may still be out of luck.
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
Read this very carefully before you proceed. Sometimes iTunes will allow you to restore the iPad without having to use recovery mode, but if you need to use recovery mode and don't have a backup, that is where you may have a problem.
http://support.apple.com/kb/ht1212
If you need recovery mode ....
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?
Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc
-
Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.
Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
The usual troubleshooting steps are, also remember to test it after every step:
1. Restart
2. Reset
3. Restore from backup
4. Restore as new.
If no joy, make an Appointment with the Apple genius and have them evaluate -
After updating my iphone3gs and ipod touch 4g to ios 6, the auto lock fuction doesn't work always , especially if passbook is left open in the background!
i have also restored both the devices but the problem still persists and is affecting the battery life!Same problem here, after istalling ios 6 on my iphone 4s my auto lock didnt work, but when i closed my assistive touch it worked again..I didnt have this problem in the 5.1.1 version. I dont wanna close the assistive touch tough....annoying problem !!!
Another problem occured in the settings of alarm clock. The sensivity of the on-off button is not as good as in the 5.1.1 version...
Hope they will fix this problem soon !!!
Is there anyone else who hava the same problems??
Best regards... -
4 hours ago my iphone randomly turned off and now i cant get it to turn back on. Ive tried everything, trying to reset it, charging it but nothing works! the charging symbol doesnt even come up when i plugged in the charger. Please help!
Hello there, LaruaGalliers.
The following Knowledge Base article provides some great troubleshooting steps for your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
Battery does not charge
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
iPhone or iPod touch displays the low-battery image and is unresponsive
If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.
You should see this image when iPhone or iPod touch begins to charge:
If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
If the issue persists, follow these troubleshooting steps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
Cheers,
JackFirst, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop). Use this to help you do this: http://support.apple.com/kb/PH3606
Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts. Tap the delete key on your keyboard (or right click /control click a contact and select delete).
You iPhone, iPad and iCloud.com should not be empty for contacts.
Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
Next, go back to iCloud.com and import your contacts (those exported .vcards). You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
Good luck. -
I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks
Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt -
Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?
Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari. -
my keynote has frozen and wont open but the saved version wont open either. if i restart my laptop i am afraid that it will erase my work. please help me
Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
let us know if this helped -
I have a Mac OS X Version 10.5.8. Just updated my iphone 5 & can not back anything up from itunes because my software on my mac is not up to date. What software should I now have to be up to date? Im so confused by all that is offered! PLEASE HELP ME.
Hi
You need to upgrade to the next OS 10.6 Snow Leopard by purchasing the DVD online.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
and once installed, use Software Update
- to update to 10.6.8
- and update your iTunes. -
I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!
You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
sir,my brother iphone was theft by some one,an we dont have IMEI number .please help us that is my brother personal mobile phone...
Welcome to the user to User Technical Support Forum provided by Apple.
See here For...
Lost or Stolen iOS device > http://support.apple.com/kb/HT5668
More Info > locate your iOS device or Mac -
I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi". Where do I find this or how do I get it?
"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
The report l runs very night and gets ended with error
Dear all, I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X". Please suggest how to solve the problem. Is t
-
How to select active Oracle ODBC Driver programmatically?
Hi, My application creates ODBC DSN to connect with Oracle 10g database server. I need to find out Oracle Driver installed on the system programmatically. I am trying to read KEY_<PRODUCT NUMBER> registry key and eventually searching ORACLE_HOME valu
-
How to check the integer value with Date Column
Hi Friends, I have a filter called 'Days'. I need to show the data based on the Days filter (Example : 2 Days). Example Query: Select * from Tb1 Where EndDate(Value as '03/05/2013' > Days ( value as 2) How to handle the above scenario. Thanks in Adva
-
Problem in seeing new LaCie USB drive
Hi all, am looking for information related to the fact that my LaCie 320 gig USB drive will not show on the desktop. Sometimes it does appear to quickly vanish, often with an error message relating to inappropriate device removal, but of course I hav
-
I have an alm Tiway host cmd error response 0002: address out of range
Some of the i/o points do not display either as alias or as native memebers.