DVCPROHD Audio Plugin Failure

I couldn't find a place where this really fit—it's an audio plugin question, but I don't use the Pro Software—so I put it in the general OSX category; feel free to move it.
My issue is with the DVC PRO HD Audio plugin (/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin). I am using a simple afplay command to try and add sounds on startup/login, but I note the following error when using the command through terminal:
afplay[18548:903] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
2010-08-10 21:08:07.249 afplay[18548:903] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x10020d3a0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
For some reason the audio plug in is not loading correctly, and i can't figure out why. To my knowledge I have never messed with the audio plugins on my computer. Kicker: the command worked the first time I used it, but has failed in subsequent uses. Not sure if restart fixes the issue. Any ideas?
-Kai

I have this problem happening on a fresh OS X 10.6.5 Install + Logic Studio 9. The console log is filling up with it like crazy. I guess I will remove it from the system for now, but I sure would like to know what it is and what affects the removal of it may have.
I get the same errors as everyone else, and my plug shows as Universal with a version number of 1.3.2.
System Preferences[713] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
System Preferences[713] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x2000fb200 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)

Similar Messages

Audio Plugin spook

Can anyone tell me what the gist of this error message from Console means? I get it often, and for a variety of actions. I am wondering if it relates to certain anomalies I need to iron out in my system. Any information welcome. Sorry. Tangled with Disk Warrior 4 recently - big mistake
dr j
23/11/07 10:59:24 AM System Preferences[292] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): Symbol not found: _keymgr_get_per_threaddata
Referenced from: /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio
Expected in: /usr/lib/libSystem.B.dylib

If you choose the option to "Scan for plug-ins" making sure the "Rescan existing plug-ins" box is ticked, do you not "lose" all those extras listed?
I've not needed to do this recently but I'm sure that's the method I used some weeks ago to remove from the listing some items that were no longer present.
Jeff

Imovie wont open because of razer audio plugin

Since the newest imovie updated I cannot open it. I Get an error that says quite unexpectedly because of the Razer Audio plugin. The only Razer software I have is for my mouse. As far as im aware it has nothing to do with Audio, and I movie worked fine with it before the update. Any fix ideas other than uninstalling my mouse?

/Library/Audio/Plug-Ins/HAL/RazerAudio.plugin/Contents/MacOS/RazerAudio
Remove the plug-in.

How can I get the rest of my third party audio plugins (UAD & Altiverb) to show up in FCPX

Hello Everyone,
In FCPX'as audio effects I can see the Logic (included with FCPX) plugins, as well as my own Celemony (Melodyne) & PSP Audioware plugins. However, my UAD plugins and Altiverb are not there. How do I get FCPX to see my other audio plugins that are also currently on my machine?
Any help appreciated, thank you.
~Shea A.J. Comfort

err = -50 when downloading from store - https://discussions.apple.com/thread/3697501 - delete incomplete downloads from downloads folder as per http://support.apple.com/kb/TS3297
iTunes Store: "Error (-50)" when downloading purchased content - http://support.apple.com/kb/TS1583

Premiere CC hangs on startup ' scanning audio plugins'

Having trouble with Premiere CC on a Mac. Installed and re-installed several times, deleting everything I could find.
Everything installed fine - but when I startup Premiere, it hangs on the 'scanning audio plugins'
Does anyone have the same experience and if so, is there a simple solution?
Thank you.

Hi,
Please move all Items from the below mention folder location and empty the Folder
Main Hard drive->Library->Application Support->Adobe->Common->Plugin->7.0->Media Core
Once the Media Core folder is Empty then try to launch .
Also empty the Quick time folder from the below mention location
Main Hard drive->Library->Quick time
Move all components from the Quick time folder and empty the folder and then try to launch , it might fix the problem for you as it seems some plugins are causing the issue.
regards
Karandeep singh

Safari 6.0.5 plugin failure x Flash player

Hello,
Two days ago I've opened my Safari 6.0.5 like I do everyday and suddenly I have the plugin Failure problem, I can't watch any vids on youtube or anything. I've been reading solutions for it and I did all the troubleshoot I've found, but no positive result.
I have Chrome and it works fine since it has it's own plugin attached. But I don't want to use chrome since I actually like this version of Safari, but I might change my mind in the end if I dont find a solution for this
> Uninstalled, Reboot, Reinstall. KO (Latest version @adobe.com)
> Unsubscribed from the HTML 5 thing from Youtube (seamed to work for 2 minutes, then next video on youtube. KO)
> Cleared Cahce, reset Safari. KO
Is there anything else I can do ?
I'm running my MAC on
Software OS X 10.8.4
Thanks for the help guys
Alexandre Morey

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Plugin Failure Mac

Out of the blue, I am unable to upload images. Facebook, photo websites- they will not allow me to upload. I get a 'plugin failure' message and that's all it says. I have uninstalled, restarted, reinstalled and restarted and it still doesn't work. I don't get it. I am having no other problems. Video, etc. works fine. It's just image upload. I'm running Safari on Mountain Lion -the most current version. Help! It's driving me crazy. It always worked fine before- I don't know what changed.
Thanks!

Try a complete "clean install" per the illustrated instructions here: http://forums.adobe.com/thread/1343084
I did those with Lion, but they'll work with Mt. Lion too.
If it still fails after that, post back.

Third Party VST audio plugins - stereo, multichannel

Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
Another question I have is well I just made a 32-bit version of my plugin for Audition to find it and it works fine when its a stereo 2 input 2 output plugin.
But I have a plugin that is 2 input 4 output and although making it 32-bits Audition will scan and find it, It will always be disabled in the plugin list and I can't find a way to enable the plugin.
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
Any information would be highly appreciated!
Thanks you very much.
Sergio.

sergexte wrote:
Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
This release of Audition is 32-bit only and thus only supports 32-bit VST plug-ins. You may wish to try your 64-bit VST in Premiere Pro as it is a 64-bit app that also supports third-party VSTs
sergexte wrote:
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
You can have plug-ins with more than 2 outputs, however, we don't support plug-ins with asymmetrical channel configurations. There's a lot of details that need to be attended to in order to get that to be bulletproof. So if you had something that was 6 in and 6 out, that should be possible in this version of Audition.

Third party Audio plugins don't work here

I'm wondering if someone is able to use third party Audio plugins (like Waves, Sonnox, Sonalksis, etc.) in FCPX. I can't. I have them for Logic and I can see them in FCPX, but if I try to use them I encounter various issues (settings not saved, FCPX crashes, and so on...).
Only Logic plugs work fine

There are NUMEROUS of issues with third pty AU's in FCPx. I have reported many of them. Settings not getting stored, crashes etc etc etc...
Plugs that work perfectly in Logic Pro....
AU integration in FCPx is highly erratic. Unfortunately.
You also wanna be VERY careful when using .CAF files in FCPx which have more than two channels of audio. Distortion etc... are bound to happen unless you take appropriate measures and disable channels not pertaining to stereo.

After downloading Adobe Reader 11.0.6 I get "plugin failure" when I try to open a video link. Fix?

After downloading and installing Adope Reader 11.0.6 I get "plugin failure" when I try to open a video link or watch a program in an archive. How can I fix this?

My browser is Safari in Mac OS 10.9.2. Don't know if they are Flash videos, but it sounds likely.

Audio Plugin for iTunes????

Since Volume Logic doesn't work anymore, and they don't seem to be in a hurry to fix it, does anybody know of any other good audio plugins for iTunes on Windows, please.
Help much appreciated

Perhaps SRS iWOW would be worth looking at.
Thanks so much for the help! I trialed the software and bought it after the third song! I'm very happy with it so far. Thanks again for the suggestion!

Missing Audio Plugins

Just completed first project since updating to 10.0.8 - which was not without it's problems, invovling much deleting of preferences to cure the "restoring windows" hang... Anyway - made a compound clip of the final for export and went to grab an audio limiter to push the levels up a little only to find I had no audio plugins anymore - or so I thought. After much frustration and back and forth with safe boots and more preference deleting I discovered that I did in fact still have all my audio plugins - BUT - all of the catagories that used to display them on the left hand side of the effects browser are now missing; INCLUDING the main catagory labelled "AUDIO" - so it looks like there are no audio plugins available at all.. but actually, if you select "ALL" from the VIDEO list and then scroll down past the video plugins you get the the audio plugins... :-O
So I'm posting here for 2 reasons - firstly in case anyone else experiences the sense of panic I did when I thought I was going to have to export the audio to process outside and re-import (hours before delivery) and secondly because I would love to know "Where have all the audio catagories gone?"
I have Waves Mecury, UAD and many, many other plugins installed (594 in total) - so working my way quickly through the list to find what I want is now a complete pain.
Anyone have any ideas? Or is that just "progress'...?

I have Waves Mecury, UAD and many, many other plugins installed (594 in total) - so working my way quickly through the list to find what I want is now a complete pain.
Anyone have any ideas? Or is that just "progress'...?
No, this must merely a glitch that may probably be fixed by one of the standard troubleshooting techniques:
1) trash preferences (which you probably tried already)
2) revert to original layout
3) delete the layouts folder inside ~/Library/Application Support/Final Cut Pro

Fcp wont load cause of audio plugins

Hi. I work on Fcp studio and Logic pro. I have a lot of audio plugins for Logic espescially waves. But now fcp wont load cause it crashes when it gets to a certain plugin. I don't want to use audio plugins in fcp as I do my audio in logic.
Why has fcp seen my logic plugins and how can I stop this, I can't run fcp. I've tried dragging the components folder out but no luck. There must be a resolution to this, it's driving me nuts.
Many thanks
Antony.

I've had the same problem.
FCS maintenance pack is not really an option - it disables the plugins globally, so Logic wont load them. It's also expensive (for what it does) - $169.
The easiest workaround I found is to shift the plugins (located in the /Library/Audio/Plug-Ins/Components/ folder) to - for example - another folder (not called 'components') on the desktop, before launching FCP. Then you can move them back before launching Logic. A pain, yes, but until Apple fixes their problem...waiting.
None of the plugins in this folder are core to FCP (if you're like me they'll be all Logic plugins), so there are no consequences to FCP. You could probably keep some in the folder, as I think the problem has got to do with the number of plugins (a different plugin crashes FCP every time for me).
Cheers,
Dan

On Mavericks can't stream movies/shows on Netflix..Plugin Failure

Everytime I try to stream something from netflix I get plugin failure...My Netflix is basically worthless now. Never had this problem on Snow Leopard. It ****** me off. I have updated silverlight and still no luck! Can anyone help me.

I've tried uninstalling and reinstalling. This is small sample from Console of Silverlight crashing:
I'm fairly frustrated, too. I have to imagine that between Microsoft's end-of-lifing Silverlight, Netflix and others wanting DRM to be embedded as a part of the web's spec, and how, at least in the US, we don't seem to care if we have network neutrality, I think we're going to face some interesting changes in services like Netflix and Hulu in the coming months. Unless we can convince our corporations that we really don't want DRM in our videos the same as we don't want DRM in our music and that some form of mandated network neutrality is fundamental to our freedom online; well, I think we'll still remain tied to these bloody proprietary plug-ins for streaming. Certainly, we're at the mercy of Microsoft, Netflix, Comcast, Apple, indeed most major content providers to grant we measly users access to services for which we already pay.
You can tell I'm most unimpressed, as well. Please let me know if you find a solution.

NTFS plugin failure

I keep getting this fatal error whenever I attempt to crawl a file server...any ideas on what the fix to this may be....any help is appreciated.
11:32:39:927 INFO     main     NTFSCrawlerPluginManager init plugin manager
11:32:39:945 FATAL     main     NTFS plugin failure Due to invalid params
11:32:39:945 FATAL     main     empty value for ENDPOINT
11:32:39:946 FATAL     main     caught plugin exception: invalid parameters
11:32:39:947 ERROR     main     invalid parameters oracle.search.sdk.crawler.PluginException     oracle.search.plugin.ntfsLinWin.NTFSCrawlerPluginManager:init:182     oracle.search.crawler.WebCrawler:begin:1078     ImtCrawler:run:1805     ImtCrawler:main:471
11:32:40:014 INFO     Thread-1     Remote command "reportstatistics" received, argument = "quit"
11:32:40:015 INFO     Thread-1     Executing remote command "reportstatistics"
11:32:40:029 INFO     Thread-1     Send back remote command execution result
11:32:41:054 INFO     main     Shutting down all crawling threads...

Roger:
Utilizing version 10.2....I actually deleted the old search and created a new one because of changing one thing or another and felt it was better to begin from scratch. Actually was able to crawl the particular server and got fetch failures. So, I guess I've got the crawl issue beat...I probably just need to adjust a few more parameters to be able to get a full crawl. I'm actually very new at Oracle and kind of swinging in the dark trying things out.
Gary

DVCPROHD Audio Plugin Failure

Similar Messages

Maybe you are looking for