DVD Compression/Burning All In One

Any program that anyone knows of that will work like DVD Shrink does for PC in that it will rip, compress and then prompt to burn the file for you when it has finished all aforementioned? I used MacRipper but don't know what to do with the file after that as I am not very proficient with how to burn the file to a DVD after it has been ripped. The all in one program would be easier for me as DVD Shrink was a great program for avoiding many steps. I want to make a back up copy of some of my DVDs that I have purchased.

DVD2oneX has better compression and will burn also. DVD2oneX is better on the newer releases. I do have and use both Toast and DVD20neX.
DVD2oneX is try before you buy so give it a shot.

Similar Messages

  • Free replacement for popcorn 4 (dvd compression/burning) that works with Mavericks?

    I make frequent backups of dvds that I own because my children mangle them. I was using Popcorn 4, which was just OK, but now it doesn't seem to work at all with Mavericks, and it has been replaced by Toast (on the Roxio website), which is much more expensive, and doesn't look that much better.  I use Rip-it to create the Video_TS files on my hard drive, but I need something to transfer those files to a playable DVD.
    I've tried Burn, Aimersoft Video Converter Ultimate, but so far, no luck.
    Disclaimer: I have purchased these DVDs, and I'm just making back-up copies, not selling them on my doorstep.
    I have a mid-2009 MacBook Pro running OSX Mavericks 10.9

    elisabethfromseattle wrote:
    Tony T1: I installed it, but I am getting a message that says I cannot open it because it is from an unidentified developer. Also, it looks like they stopped updating Disco in 2011.  But thank you for the suggestion.
    Just right-click and then select [Open]
    (you only need to do this once, then you can just click the App to open)
    Developement stopped as DVD use is declining
    (Apple is no longer developing iDVD).
    The positive is that Disco is now free.

  • Printing on a DVD with C6180 All-n-one

    My blank dvd's are labeled that they can be directly printed on with an HP Inkjet. Can I print on them with the C6180? If so, how? OS Windows 7 64bit.

    Hi there izzyreally,
    Looking over the product specs located here I am not seeing compatibility with printing on dvd/cd. An alternative though is printing to dvd/cd labels. Most Avery packs come with software to help setup and print the labels properly and you can find them all over most computer stores and place like wal-mart. Hope it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • PAL to NTSC DVD compression questions

    Ok,
    I have recently finished a dvd in PAL format with about 4.5GB total video once compressed. Now I need to get this into an NTSC version. Is it possible to use Compressor 2 to convert the DVD compressed clips/audio [the ones ready for PAL DVD] into NTSC format ready to build my project in DVDSP? Or do I need my original quicktime clips in PAL format and change them to NTSC in Compressor 2 then make them into NTSC DVD ready clips? Also what is the best setting for NTSC DVD in compressor that will be ok for the size of my final version [4.5GB]. Sorry about these questions but I made the PAl version with compressor 1 and there was far less settings to worry about.
    powerbook 12   Mac OS X (10.2.x)  

    I'm pretty sure you need to go back to your Final Cut source material and re-export via Compressor by selecting 'advanced standards conversion' to get your NTSC files. Then you can import these into DVDSP as NTSC assets.

  • DVD non Burn errror - 2147352542

    Only recently have I been having this problem at the last point of backing up my files to DVD. - After 2 HOURS of waiting, it tells me it was not completed and gives error code -2147352542. but get this, when I insert the DVD I burned all the stuff seems to be on it! Do I trust this before I go deleting my HD files I wonder.
    I went down from 8x to 4x speed media and tried to install firmware using os 9 but couldnt get it to boot.
    I my G4 already a relic! Give us all a break Stevo

    You don't burn as DVD RAM unless you have DVD RAM disks and want to assure no compatibilty whatsoever. Try Toast and Verbatim DVD+R disks.

  • Encore can't burn more than one DVD at a time: Sense Code 56400

    For a long time now I've been unable to burn multiple DVD's at a time. I burn more than one and I get an error and have to make a coaster out of yet another DVD
    I just upgraded to 24 gb of DDR3 PC 1600 RAM, I have an 6 Core Processor, I have 7.8 on everything accept my hard drive which is 7.0 out of 7.9 according to my Windows 7 Pro. 64 bit system.
    I have 2 different DVD burners, one is a blu-ray burner too. I have the same issues, only different error readings it seems, on both drives. The first drive didn't burn even one for some reason so I tried the second. The second drive would burned 3 and on the fourth I got the errors' which I've included screen shots of below. I was surprised I got through three before I got to this error. By the end of the week I have a large project I need to make 30 DVD's of. HELP!!!!!
    A long time ago on my older machine I had similar problems and I went through different drives and discs until I seemed to come up with the magic combination which seemed to be a Plextor burner and Verbatim. But, then i got a bad batch of verbatim and tried Maxell and used those successfully for a while. Right now I'm using what a friend gave me, TDK's. I'm wondering if that's what the problem is... HELP!!!!

    I have managed to get it to work consistently now. I just burned 20 DVD's without a problem.
    I tried everything you suggested except the imageburn software. I didn't like that site, I was too anxious to try and figure out where to download that software in the midst of all the advertisements on that site.
    After clearing out everything in startup and services except what I needed I still wasn't able to burn successfully. Finally I went and purchased some Verbatim DVD-R discs and wahlah! Actually, after the first try with the verbatim I had an error code when trying to burn with Encore. So, I created and image file as you suggested and then I used Cyberlink's Power2Go to burn the image file and from there on it seems everything is solid.
    I think the biggest problem was using TDK discs. I came to the realization a few years ago that certain disks are not as predictable as others and that verbatim and maxell seem to be the best. I did get one bad batch of verbatim though one time and that's when I switched to Maxell. My friend gave me 200 of the TDK's and I've been having problems ever since. But, I wasn't sure what it was exactly because he gave me those around the same time I rebuilt my system.
    I had also found the Plextor seems to be the best bet for burners. But, I had been using an HP one lately and thought maybe that was the problem. However, now it seems to be fine.
    I really don't know what fixed it. I mean, nothing definitely worked until I started using the Verbatim today. But, that first verbatim erroring perplexed me. I had done some other things too, like removed some programs, like a bunch of HP printer crap. I even removed my virus software, Window Security Essentials. I just reinstalled it so now I'm wondering if I can burn as consistently. I had seen somewhere where someone said they removed Windows' Defender to get theirs working.
    Anyways, I guess what I need to do is format my main hard drive, only put adobe stuff on it, and then take my old computer set it up for everything else. That'll probably be the best thing to do... If I have anymore problems like this I'm doing that right away!

  • How to burn more than one file on the same dvd?

    I would like to burn more than one file in to the same dvd. It seems to me that using Finder I can burn only a file. There is some alternative command? Thank's

    Select all the item to burn... right click...
    Or
    Place all items into a folder and burn the folder to the disc.
    Or
    Make a Burn Folder in the Finder (place items into the folder) and burn from there to a disc.

  • Burning more than one movie on a DVD

    I have put together 3 iMovies. I can export them to iDVD and burn them one at a time but I would like to be able to combine all three movies and burn them on one DVD. I haven't found any information to help me with this so can anyone help? Or is this impossible to do.
    Thanks
    Skitterbug
    IMac   Mac OS X (10.4.7)   I'm fairly new at doing this so I will appreciate all the help I can get!

    Hi Sharon,
    Which version of iMovie are you using? If you are using iMovie version 4, then you get this file structure in your project...
    MyProject (Main project folder)
    . MyProject.iMovieProj (the project file)
    . MyProject.mov (a Quicktime reference movie)
    . Media (a folder that holds all your media)
    In addition you might also have an "Audio Waveforms" folder for some projects.
    When you export to iDVD using the "Create iDVD Project" button in iMovie, you then get a new folder added to your project called "Shared Movies" and in that you get an iDVD folder and in that you get another .mov reference movie. Here is an example from one of my projects...
    Thanks to ImageShack for Free Image Hosting... http://imageshack.us/
    So the one marked 1. is the project reference movie that will be updated if you make any changes to your iMovie. The one marked 2. is the "snapshot" of your project at the time you used the iDVD button. If you create an iDVD project and don't touch the iMovie project again, these two files will be identical. But if you go in and change something in the project, you have to use the iDVD button to update this file (which also launched iDVD again and starts a new project, which you can simply close out of without saving).
    Ok to get to your specific question. In iDVD you can dra and drop any reference (.mov) right into your project. Just be sure you drop it into the project NOT on one of the drop zones, but instead into any free spot on the screen. The movie will now be added to the project. If you want a second or third movie added to the project, then navigage to your next project and grab and drop the reference .mov file onto iDVD and it will be added.
    I mention the folder structure above because you can grab either one depending on which one is more up to date or you want to use. The nice thing about the "Shared Movie" folder created in iMovie4 is you can exploit this to create alternate version of a project because when you use that button a "snap shot" is taken of your project at that time and a separate reference movie (#2 on the screen shot above) is created. Just remember, if you want to create another "snap shot" and keep the other, then rename #2 to something else so it doesn't get overwritten.
    Hope that helps,
    Patrick

  • DVD not having full timeline from Encore CS5, but states it burned all

    I have searched the forums here and have not found anything that addresses my issue, so I thought I would ask. I will be as detailed as possible, so please bear with me.
    I am recording high school football games using a Sony HDR-FX1 camcorder using MiniDV tapes. I am shooting in 1440X1080 resolution. I am doing my editing and such on a Windows 7 64-bit computer that has an i5 - 750 processor, 12GB DDR3 RAM, ASUS P7P55D-E Pro motherboard, and a 320 GB HDD. I have Master Collection CS5 installed, and am primarily using Premiere Pro and Encore for this. I edit the footage and include chapter markers for each Quarter of the game, and then export it to build the DVD in Encore. I also edit up a Main Menu sequence that is basically highlights, which I will put buttons on once in Encore. Once the Encore project is built, I check the project to be certain there are no errors and double check the chapter markers are where they should be, etc. Everything is exactly how I want it to be. My DVD file size is 7.55GB and I am burning to a dual-layer DVD. I'm currently using Optical Quantum 8.5GB DVD+R DL blank media which has a speed of 8X. I watch the process take place, which takes about 20-30 minutes and the window states it burned all 7.55GBs of information. But when I test out the DVD, the file size is only 7.05 GB, not the 7.55GB it should be. My 1st chapter marker is correct, my 2nd one is correct, my 3rd chapter marker is too early by about 3-5 seconds, and the 4th chapter marker shows up half way through the 3rd quarter, yet the actual 4th quarter footage is not on the disc. I usually burn the files at 6X speed. I've also noticed that in the higher action parts of the footage there is what I would call "ghosting", meaning there are trails behind the fast moving objects and it gets blurry. I've burned two separate games with almost identical results and have now gone through about 6 blank DVDs.
    What has me is I did the exact same process with games last year and I never had this issue. Now granted I only had 4GB of RAM back then, but I highly doubt the additional 8GB of RAM is causing this. One other thing, last year my footage only took at most 2 hours to encode from Premiere Pro, but now it is taking over 7 hrs. Any help in this matter would be most appreciated. I'll be glad to offer any additional information if necessary. Thanks in advance.

    There are some bugs with Encore's layer break workflow.In some cases, Encore adds an extra chapter on the timeline at the place where the layer break occurs. As a result of this, subsequent chapters will be incremented by 1.
    Since you are facing problem with automatic layer break, I would suggest you to add a manual layer break exactly at the chapter #3.
    if Encore doesn't allow you to add layer break at chapter #3 then you may want to add a new chapter in between #3 and #4 and add layer break at the new chapter.
    Steps to add Manual Layer break:
    1. File> Build>DVD
    2. In the disc info section, make sure the dic's size is set to Dual layer (8.54 GB)
    3. Select the Manual Layer break option
    4. Click on the Build button, now it opens the "Set Layer Transition dialog box" where you can set the layer break.

  • Why won't my hp pavilion all in one not play dvds or games?(It does play a game from 2000.)

    Product Name: Hp Pavilion all in one I don't know the product number.
    Operating System: Windows 7 64-bit
    It says insert disc each time
    No upgrades before the issue

    Hi,
    The following procedure will test if your PC can start from a bootable disc in the CD/DVD drive - the advantage of trying this is that it will rule out any possible Windows driver error as the CD/DVD drive is under the control of the Bios when starting the PC.  So if you find that the PC will not boot from the CD or DVD, then it's almost certainly a Hardware fault in the optical drive itself and it will need to be replaced.
    Using another PC to create a Windows 7 Rescue CD and DVD.  Download the ISO from the link below.
    Windows 7 64bit
    You need use an application such as ImgBurn to correctly burn the ISO to a CD and then also burn it to a DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  Once created, insert the CD and then restart the PC and see if it boots from this disc - if it does, let the first screen come up ( this will show repair options etc ) then just remove the CD, insert the DVD and restart the PC again to see if it will also boot from this disc.  If the PC will not boot from the CD, it may just load straight into Windows, in which case, just remove the CD, insert the DVD and restart to see if it will boot from this disc.
    Let me know.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Choosing an external DVD burner all the time instead of the built in burner

    I have the Superdrive but prefer to use the external DVD burner to save wear and tear on the Superdrive. When I pop in a blank DVD to burn, the drop down menu appears and I have to manually click on the external DVD burner. Is there something in the system preferences that I can click so that the external burner shows up and not the Super drive?

    This is our resident iPhoto guru, Terence Devlin's, advice:
    You can move your iPhoto Library to an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Once that is done you can import directly into the iPhoto library on the external HD.

  • HP Officejet 6500 E709n all-in-one: how to print CD/DVD labels, on Mountain Lion OS?

    My printer is an HP Officejet 6500 E709n all-in-one: how do I print CD/DVD labels, using MACBook Pro & Mountain Lion OS?
    Thanks,
    Jim
    [Edited for Personal Information]

    Hi there Jim, aka @jknud , welcome to the forums
    I understand you're looking to print CD/DVD labels to your Officejet 6500 Wireless, from your Mac.
    There are normally third party software programs you can download to print out whichever brand of labels you are trying to print on. If you wish to let me know which type of labels you are using, I will see if I can find their support forums for you.
    Have a great Monday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I can't drag and drop or add to library for dvd's that I converted with Bootstrap VideoWizard All-in-one app.  hep!

    i purchased Bootstrap VideoWizard all-in-one edition and converted my homemade Dvds, but I can't drag and drop the converted files into iTunes or use iTunes file - add to library to add them to iTunes so I can sync them onto my iPad 1.  What am I doing wrong?  The bootstrap website wasn't any help.

    Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
    If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
    Then, drag the address panel up to wherever you want it.
    You may also want to add it to the New Message window in the same way.

  • Burning more than one dvd

    Anyone know of a way to burn more than one DVD at a time with DVD studio Pro if you have two burners in your machine?

    Hi Mossie,
    I got a product this summer - Dragon Burn from NTI.
    http://www.ntius.com/dragon_burn.asp
    It's not as easy as Toast, but works pretty well. There are a few extra steps to creating the disc image to burn from , but not too bad.
    Give it a try. They have a demo on the site.
    Bill

  • Hi, i don't know what to do i´m desperate in the last few days had appeared brown spots all over one side of the charger and begin to appear on the other side, seem to be burns ....what can i do? :s

    hi, i don't know what to do i´m desperate in the last few days had appeared brown spots all over one side of the charger and begin to appear on the other side, seem to be burns ....what can i do? :s.... its is the first time it happened this to my charger  in my three mac i had ....

    Hmmmmm....
    Does it get overly hot when used?
    Can't decide whether they are the product of overheating or merely that someone sprayed some product nearby, that was incompatible with the plastic.
    Ok, si compraste y registraste el equipo, tus datos estan en linea y el proveedor verificara el estatus de la garantia a traves del numero de serie. Tambien lo puedes consultar aqui:  https://selfsolve.apple.com/

Maybe you are looking for