DVD Drive Doesn't recognize Media Disc

I have an Envy dv7. Product # B6B75AV. DVD drive hpBD MLT UJ260
I have a program that will copy a dvd from the source, dvd drive #1, to the target same dvd drive #1.
When it is done copying the disc it ejects the original and asks to have a writable media disc inserted.
When I insert the DVD the drive doesn't recognize the blank dvd, keeps asking for it, and when I put it in, it spits back out saying to insert a writable disc. I have used the blank DVD+R for burning other things so it should work. I tired putting in 4 different blank discs to make sure the disc was ok.
Is there anyway to find out for sure whether this DVD writer uses DVD+R or DVD-R?
Any help will be appreciated.

Hi,
You can view all the media capabilities of your optical drive using the free application on the following link.
http://www.vso-software.fr/products/inspector/inspector.php
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Tecra M4 - DVD drive doesn't recognize any disk under Vista

Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your help

Maybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized?

Dv2915nr cd/dvd drive doesn't recognize when disk in. drive doesnt show up in device manager.

dv2915nr cd/dvd drive doesn't recognize when disk in. drive doesnt show up in device manager.

Hi,
Here's one option you could try as it will give a good indication whether the problem is with Windows or a Hardware issue with the optical drive itself.
Create a bootable Ubuntu CD
The Ubuntu CD you create should run as you boot the notebook ( ie outside of Windows operating system ), so if this will not run, the problem is almost certainly a Hardware issue with the DVD drive
On another PC, follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD. The 'try it' option does not need to install on the Hard Drive, it just runs from the CD.
http://www.ubuntu.com/desktop/get-ubuntu/download
Let me know if this will run.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

UJ862AS DVD-RAM doesn't recognize -R discs on Satellite U400

For some reason my DVD drive wil no longer recognizes -R discs.
I have a MAT****A DVD-RAM UJ862AS drive.
Any clues?

Hi
Found some interesting info in user manual.
*Page 78*
There you can find a list of tested and good functioning disks from these manufacturers.
CD-R:
TAIYO Yuden Co Ltd, Mitsubishi KAGAKU Media CO LTD, Ricoh CO LTD, Hitachi Maxwell LTD.
DVD-R:
DVD Specifications for recordable discs for general version 2.0
TAIYO Yuden Co Ltd,
Matsu****a Electric Industrial Co LTD.
There is also an notification for DVD R:
There are two types of DVD-R disks: authoring and general use discs. Dont use the authoring disks. Only general use discs can be written to by a computer drive.

I installed Lion, now my dvd drive doesn't recognize any files on dvd. Please help.

I'm a photographer with tons on images on dvd and my dvd drive now doesn't recognize any files on any of my dvd's. Help!!!

After 3 trips to the Apple store this week, the issue is still unresolved. The photo dvd's open just fine on Snow Leopard, but are not recognized at all on Lion. I'm guessing since the DVD's were originally burned on a PC, they will no longer work. After finding out that PowerPC is no longer recognized by Lion and I can no longer use Nikon NX2 (Photo editing software), I will be re-installing Snow Leopard. According to the Apple store in Lancaster, Pa. there is no refund available for my Lion purchase. I have a ton of photo DVD's, most of which will not open since I've only recently switched to an IMAC system. It has made me think about returning to the PC world. I'm VERY unhappy with these developments and I really need to re-think my computer situation. I don't do much else besides photography. My purchases and time spent with my IMAC has aparently been a great waste.

DVD drive doesn't recognize blank DVDs or allow burns

I got a 20", 2.4 Ghz Intel Imac not too long ago, with Leopard already installed. I'd been using Parallels or Boot Camp to do all by DVD burning in Windows until recently. The first time I tried to do it in OSX 10.5.1, it didn't work right. The DVD icon does not show up on the desktop, though it's acknowledged when it's inserted, and a box pops up asking for me to perform an action. But I can't get it to burn a simple data DVD through disk utility, or even in DVD Studio Pro. I saw other threads about this, wondering if anyone has a solution. A file ending in .plist was mentioned, that you should move from its folder if you find it. I didn't find it. What else can I do? Works fine in Windows through Boot Camp or Parallels, and once a disc has something on it, it'll show up when put in the DVD drive. It's only blanks that are "invisible".

You issue sounds similiar to all of us in the other chat thread. Go to "MATSHITA superdrive has died" and post your comments there, perhaps more people post, it might get Apple's attention.

L355D DVD drive doesn't recognize some Photoshop CS2 disks

I have 2 Toshiba Laptops, one with XP, one with Vista (L355D). Neither one will even recognize my Adobe Photoshop CS2 install disk. This Disk works fine in ALL other computers (3) I have tried it on. Any Ideas???

If these are new original DVD, you should bring your system in for alignment. If they are copied DVDs, the drive that made them may be out of alignment and your good drive can't read the bad copy. There is also another issue you may be talking about. Many DVD movies are assigned a country code and will not run on a machine from another country. This was intended to prevent piracy.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Drive doesn't recognize ANY DVDs or CDs?

Can someone explain real simple stupid like how to try to get my DVD/CD player to recognize disks again. I have a PIONEER DVD-RW DVR-103 in my G4 am using Tiger 10.4.3. After installing Tiger my computer has fallen to pieces and this is the last one. Now I am seriously considering cleaning out the entire machine and starting anew as I have a G5 on order. Problem is how can I even reinstall is my DVD drive won't recognize any disks? It spins and spins and spits out the DVD. It will read nothing.
Thanks, Steph

One day the Pioneer DVR-106 drive I had in my G4 MDD stopped working it would accept disks. I tired everything. calls to apple care didnt help since this was an upgrade I added. I read everything on every site.
finally took the drive out of the computer and as I turned it over I heard a rattle. it had never rattled before. A search of posts on www.xlr8yourmac.com lead me to a posting about parts inisde the drive failing and in some cases some miniscule part could cause the drive to fail to read any disc. I was at my wits end and decided what the heck I was planning on Buying a new DVD-R drive anyway, so I opened the puppy up. I put everything out on my white utility table and took care to track every screw. To give me a reference point to how the drive looks and works I took apart a different CDROM drive that no longer worked. I noticed both units were similar internally.
well to make a long story short the culprit was a piece of dust that had got onto the Laser Lens and a piece of metal, some spring that lodged itself near the midle. It was magnetized and stuck to the drive middle area. I took the piece out and crossed my fingers. put it back together and decided to put it in an External 5.25" FW400 case which i have a few siting around for when I pull old HD's. Plugging in the now external Pioneer DVR-106 the unit turned on a-ok and voila the Mac recognized it and was able to read every DVd and CD and perfomred a succesflu burns for many DVD data discs and Audio CD's.
I posted my experience on xlr8yourmac.com and I am pretty sure I lucked out. But hey worse comes to worse, you can always pop that puppy open and see whats there. never know.
good luck anyway and you probably just better of to buy a new OEM Pioneer Superdrive, OWC aka macsales.com has some good bundles also Newegg.com has better deals for people who just want the Bare drive sans disks, cables, etc.

G4 DVD drive won't recognize OS 10.4 upgrade disc

I have a a PowerMac G4 (AGP graphics) with a CPU type PowerPC G4 (2.9). I have a upgrade disc for OS 10.4. When I load it into my Quantam Fireballlp LM27.3 DVD drive, the drive won't recognize the disc. It attempts to read it and then ejects it. I have an external USB 2.0 DVD RW burner plugged into a USB 1.0 port, and it recognizes the disc, but I can't select it as the startup disc.
How do I get my system to read the upgrade disc so I can upgrade to OS 10.4? I've run a lens cleaner several times with no change.
Thanks!

Hi-
Well, if you know someone who has a Mac, or, if you have another machine, try the disc in another machine. There is a possibility that the disc itself is bad. I would consider this a strong possibility, since the drive recognizes other DVD's, and the Panther install disc.
If the disc tests good in another machine, then you will need to consider replacing the drive for a newer model. A new combo drive is only about $30-$40. The Pioneer DVR-112 would be a good consideration.
http://eshop.macsales.com/item/Pioneer/DVR112DBK/
As for the "helpful" not working, there seems to be a problem within the system (known by the hosts, yet allowed to continue....). For now, I will gladly accept your thanks! (and, you're welcome!)

Pavilion dv7-1232nr dvd rw drive doesn't recognize some dvds how can I fix this problem?

My pavilion dv7-1232nr dvd rw drive doesn't recognize some dvds how can I fix this problem? I am running Win 7 home premium 64 bit.

If these are new original DVD, you should bring your system in for alignment. If they are copied DVDs, the drive that made them may be out of alignment and your good drive can't read the bad copy. There is also another issue you may be talking about. Many DVD movies are assigned a country code and will not run on a machine from another country. This was intended to prevent piracy.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

EXPERTS!! CD/DVD Drive Won't Recognize Discs

Hello Experts,
My CD/DVD drive is unable to read discs. This has happened before while the computer was under warranty and the tech was able to remotely fix it, but it has started doing it again.
I figured my drive had gone bad, so I have bought a new drive and installed it, but the same problem. I have also uninstalled and reinstalled the drivers as well. No new software has been added or removed either.
HP Pavilion Notebook dv7-2185dx
The drive is a TSSTcorp CDDVDW TS-L633M ATA Device
Thanks in advance for the help!
Brian

Also have tried clearing the upper/lower filters in the registry, as well as system restore and microsoft fix it.
You can hear the drive reading, or attempting to read the disc, but it says there is no disc present.

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated

This is usually a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there. It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies. I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive. Computer is out of warranty.

Hello crollinsphoto1, welcome to the HP Forums.
It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
I'd recommend starting with this document:
Resolving DVD and Blu-ray Movie Problems (Windows 7).
Also, are these purchased DVD's or burnt DVD's?
Do the movies play in other sources? (DVD player, other PC)
Let me know how this goes.
Thanks.
I worked on behalf of HP.

CD/DVD drive won't read media

I just bought a Power Mac G4 Quicksilver from a friend (I'm new to this) and she said that the CD/DVD drive sometimes has problems reading discs. She also said that a friend of hers told her that all it needed was a new "drive reader" which would only be about $20.
So far it hasn't been able to read anything for me. When I insert a disc it makes some clicking sounds as if it's trying to read it but then after about a minute it just ejects it without any error message. I'd rather not replace it if I can avoid it.
Any suggestions on how to fix this? Is there such thing as a "drive reader"? What drive should I get if I do need to replace it?
Thanks.
Jeff

Jeff, welcome to Apple Discussions & the Mac Community.
The drive could have failed. It could also be dust on the read lens inside the drive. You can get a CD/DVD drive cleaner CD at most computer stores.
There are several types of drives that you could replace the current one with:
1) one that is read only (ie. drive reader)
2) one that will read CDs & DVDs and burn CDs
3) one that will read CDs & DVDs and burn CDs & DVDs
#1 is cheapest & doesn't require any special software
#2 & #3 are more expensive & may/will require special software
 Cheers, Tom

DVD Drive Doesn't recognize Media Disc

Similar Messages

Maybe you are looking for