DVD-Drive is not working any more

My DVD-Drive is not working any more. When I enter a CD/DVD it makes a strangs bruummm for 2 or 3 times ant then ejects the CD/DVD. What can I do. I think the Drive is broken.

Here are some tips for trouble shooting slot load
http://docs.info.apple.com/article.html?artnum=88275-en
Mort

Similar Messages

  • My mac book pro fell of my desk, everything seems fine, but the dvd drive is not working properly, any suggestions

    My mac book fell of my desk yesterday. All seems well, but I noticed today that the dvd drive is not working properly, it seems to want to keep ejecting the disk even when the disk is out, and it won't accept dvd's any more. Any suggestions o fellow apple users?

    Back up EVERYTHING, then take it in to have them assess for any latent damage. Wouldn't want a similar "delayed reaction" from the hard disk drive, would we? 

  • CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

    Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
    The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
    I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated  

    This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
    You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
    Manually delete the registry entries
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
    Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
    This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
    UpperFilters
    LowerFilters
    Step 1: Start Registry EditorStart Registry Editor
    Start Registry Editor...type "regedit" into the run box on the start menu.
    Step 2: Delete the UpperFilters registry entry
    In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
    Expand SYSTEM, and then expand CurrentControlSet.
    Expand Control, and then expand Class.
    Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
    In the details pane of Registry Editor, on the right side, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
    If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
    If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?
    Step 3: Delete the LowerFilters registry entry
    In the details pane of Registry Editor, on the right side, click LowerFilters.
    Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
    If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
    Exit Registry Editor.
    Step 4: Restart your computer
    Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

  • CD/DVD Drive is not reading any discs on Equium A100

    My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
    Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
    Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

    Hello,
    Here are a few windows articles that could help.
    http://support.microsoft.com/kb/891894/en-us
    This one might do the trick, if not try this one.
    http://support.microsoft.com/kb/826510/en-us
    Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

  • DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

    HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there.  It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies.  I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive.  Computer is out of warranty.

    Hello crollinsphoto1, welcome to the HP Forums.
    It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
    I'd recommend starting with this document:
        Resolving DVD and Blu-ray Movie Problems (Windows 7).
    Also, are these purchased DVD's or burnt DVD's?  
    Do the movies play in other sources? (DVD player, other PC)
    Let me know how this goes.
    Thanks.
    I worked on behalf of HP.

  • Satellite P25-S520 - DVD drive is not working properly

    Fix DVD Drive or buy external drive
    My DVD drive is not working properly, in fact it may never have been working proper. Recently I tried to back up my PC to a DVD using Norton 360. Norton did not recognize the DVD was present. I then tried writing a text file to a DVD and was unsuccessful. Both DVD+R and DVD-R media were tried (Maxwell 16X).
    I could have probably lived with this however, I got a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my neighbors laptop and it was recognized.
    An attempt at updating the driver was also unsuccessful.
    I was able to rip a music CD last night so that at least is working correctly.
    Does anybody know how I can fix this? The important part is being able to load my new program.
    Searching some forums I've found that other people have had problems with the Pioneer drive. If the drive cannot be fixed I am not adverse to buying an external DVD drive. Unfortunately where I live there are no brick-and-mortar stores which sell external drives and I would prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can anyone suggest an external USB drive which will read and write CDs and DVDs and which is certain to be compatible with my Toshiba?
    Thank you for any help,
    Humbaba3000BC
    Satellite P25-S520
    PIONEER DVD-RW DVR-K12D
    Driver Provider: Microsoft
    Driver Date: 7/1/2001
    Driver Version: 5.1.2535.0
    Digital Signer: Microsoft Windows Publisher

    Any external USB CD/DVD drive will be compatible with your laptop.
    However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
    So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

  • W510 - nVidia 880M - GPU throttle not working any more

    Hi everybody,
    my W510 (2 month old) used to throttle down the GPU from maximum performance (550/790 MHz GPU and Memory) to lower values (135 Mhz or something) when the GPU was nearly in idle mode. I don't know when it sopped working, but today I realized the GPU staying in high performance mode all the time.
    I tried the things below but none worked so far:
    - changing through the different power schemes
    - updating the video driver with Lenovo update tool
    - installing the video driver from nVidia (using clear install option)
    It has to be a software issue since I can manually change the clock using a tool called Powermizer Manager. But the "Auto" mode is not working any more. I watched the GPU clock with GPU-z.
    Any ideas where I might have a look? I'm currently running the most recent Lenovo video driver.
    Thanks,
    Andy.

    This is the response from AirDisplay ==>>>
    Hello,
    My apologies for this issue. It's a bug we are aware of. It stems from an issue with OS X. Certain Macs that have a third party video driver installed will exhibit this issue. So, it's not just Air Display that causes this problem but other apps like Display Link, AirParrot, etc. will also have this issue. Apple has contacted us regarding the problem and they're looking into it. It's not actually something we or those other third party developers can fix. Apple has to address the issue with OS X. Hopefully they'll fix it soon.
    Elliot
    Customer Support
    Avatron Software, Inc.
    [email protected]

  • I want  to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive  is not working. Is there the possibility to buy an online Update?

    I want  to upgrad from OS X10.5.8 to 10.6.8 or higher, but my DVD drive  is not working. Is there the possibility to buy an online Update?

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    If your hardware supports more recent versions then:
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • My Home Sharing does not work any more after latest iTunes update

    After iTunes update to 11.1.3 my Home Sharing does not work any more!
    It worked just fine for several years...
    I tryed to do everything I could find on Apple support... NOTHING works.
    Most of Apple so called updates turn out real crap...
    I am wondering whats happening to Apple?...

    Hello igor_rena,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Best of luck,
    Mario

  • Adobe Acrobat Pro Licence is not working any more

    Hi, Adobe Acrobat Pro is not opening any more and giving the error "Licence is not working any more". I have a CS4 on Mac OS X 10.5.8. I tried all the suggestions in the Help Forum. What remains is to install CS4 again. Is there any risk doing that? Or is there any other option. Best, Felix

    Hi xilef79,
    Have you tried all the suggestions in this Help document: http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
    Please let us know how it goes.
    Best,
    Sara

  • How can I deactivate photoshop on a computer that is not working any more?

    How can I deactivate photoshop on a computer that is not working any more?

    Contact Adobe customer service:
    http://helpx.adobe.com/contact/
    Ken

  • Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

    Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

    cor-el,
    I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
    Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
    Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
    Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

  • Search in saved preview .pdf files not working any more

    When I download a .pdf file from the internet and open it in preview, the search command works ok. When this same file is saved to disk and opened again, search is not working any more. Is this a bug, or my fault. Regards Rolf

    Hi,
    I hope this helps...
    A while back we have more than one browser running on our PC (IE, Firefox, Chrome) and we messed by how Acrobat views documents over the web.
    I think that this has some relevance here, as around this time LC also started falling over previewing forms.
    Now if we open LC and Acrobat is not running, the "Preview PDF" is not present or accessible. So now we fire up Acrobat before we open a form in LC Designer and the preview tab is there and functioning.
    Not much of a workaround; but I am hoping that someone will have a better one!!!
    Good luck,
    Niall

  • DVD driver did not work

    hi,
    I have macBook Pro and I insert small CD before a year . today I take out the DVD driver and the got the small CD. I returned back all things as it is. the problem now that DVD driver dose not work at all . the CD can't go inside.
    I think there is problem in connection between DVD driver and other hardwares , or there is software problem , but i did not how to solve it.
    please help me to fix it.
    Thanks

    I solved the problem , I found that the wire between DVD driver and motherboard wasn't connected , I fix it then Resetting PRAM and NVRAM
    http://support.apple.com/kb/HT1379

  • HT4623 I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....

    I updated to ios 7.1 on Thursday.  My ipad basically does not work any more.  I am running around in circles on this site and on other "forums" trying to fix.  ???  Don't have time for this.....Any advice appreciated.

    give us more to work with in terms of info then "basically does not work any more"
    it can be from it's on fire to the a key on the onscreen keyboard don't respond

Maybe you are looking for

  • How can I design the motion animation according to mathematical equations?

    I would like to design some motions based on some mathematical equations. The variables included in the equations could be position (X, Y) of the object, acceleration, forces and so on. However, in adobe flash professional cc, I only found the functi

  • DAM: integrate/harmonize Collections, Keywords and IPTC location

    Lightroom currently presents the user with two independent methods to assign photos to a hierarchical structure: collections and keywords. Unless I missed something, keywords do everything that collections do, and more. In addition, there is one stru

  • What are services in Identity Server ?

    A service is a group of attributes defined under a common name. The attributes define the parameters that the service provides to an organization. For instance, in developing a payroll service, a developer might decide to include attributes that defi

  • Hi i need some help.

    This is the code i am using to read from this file: tony blanco 43 20.25 Lucy Ricardo 42 24.50 Ethel Mertz 18 18.00 each line alone and put the name in an array of strings and the number in array of int and doubles. when i run this code: import java.

  • ACE Probe - Imaging checking

    We have an ACE 4710 providing load balancer functions for 2x websites.  Is there a way to set up a probe to look for an image on the homepage of the website to deem the site is available. Thanks in advance